Answers
2.right N107
3.equal
4.left 33
Related Questions
I’ll give brainliest and 10 points
Answers
Answer:
A) (1) and (2)
Explanation:
pls mark me brainliest
Emily roller skates with a constant speed
of 8 miles per hour. How far can she travel
in 3 hours? D = SxT
Answers
Answer:
She can travel 24 miles in 3 hours.
How much force is needed to accelerate a 70 kg rider and her 200 kg
motor scooter at 4 m/s/s? (Include measurement label) *
Answers
Answer: f= mass×acceleration
They said t1he scooter so 200× 4
=800N
Explanation:
I am not that sure
Jesús sketched models of two different neutral isotopes of sodium. If the
isotope models are accurate, which statement might be true? (Refer to the
periodic table if necessary.)
O A. One shows 11 protons, and one shows 12.
O B. One shows 11 neutrons, and one shows 12.
C. One shows 11 electrons, and one shows 12.
O D. One shows 10 protons, and one shows 12.
Answers
Answer :
O B. One shows 11 neutrons, and one shows 12.
is correct
I just took the quiz <3
If the isotope models are accurate, one will show 11 neutrons, and one will show 12.
What are isotopes?Isotopes are two or more types of atoms that have the same atomic number but different mass numbers.
Based on the models of two different neutral isotopes of sodium sketched by Jesus, we can conclude the following about isotopes of sodium;
One of the isotope shows 11 neutrons, and the one shows 12.
Learn more about isotopes here: https://brainly.com/question/14220416
#SPJ2
Which equation should be used to calculate the speed of a wave?
speed = frequency x wavelength
speed = frequency x hertz
speed = period x wavelength
speed = period x hertz
Answers
The equation should be used to calculate the speed of a wave is speed = frequency x wavelength.
What is the formula for wave speed?The speed of a wave is calculated by the equations: V = λ . f or V = λ/T, and the unit of measurement is m/s. This speed depends on the medium: in gaseous media, the speed is lower than in solid media.
See more about wave speed at brainly.com/question/10715783
The equation should be used to calculate the speed of a wave is speed = frequency x wavelength.
What is Speed of wave?Wave speed is the movement of a progressive wave, which is an energy-moving disturbance that takes the shape of an oscillation and moves from one place to another.
The wavelength and frequency of a wave both affect its speed. A wave's speed is a crucial factor because it enables us to estimate how quickly the wave will disperse in the medium, which is the substance or material that will carry it.
This is the water in the case of ocean waves and the air in the case of sound waves. The kind of wave and the physical properties of the medium in which it is flowing also affect a wave's velocity.
Therefore, The equation should be used to calculate the speed of a wave is speed = frequency x wavelength.
To learn more about Wavelength, refer to the link:
https://brainly.com/question/30607075
#SPJ5
Can an object with acceleration of zero be in motion?
Answers
Answer:
NO
Explanation:
if it has no acceleration then it's not moving
Answer:
Yes when the velocity is constant then the acceleration is said to be zero. Thus an object with 0 acceleration can be in motion.
Let me give you an example to make you more clear
Example:
When a car is traveling at a constant 90 km/h in a straight line has nonzero velocity and zero acceleration.
How does the sun maintain its high temperature and energy output?
Answers
Answer:
The core of the sun is the region that extends from the center to about 20–25% of the solar radius. It is here, in the core, where energy is produced by hydrogen atoms (H) being converted into nuclei of helium (He). ... The core is the only part of the sun that produces an appreciable amount of heat through fusion.
Explanation:
I got you
By not running out of fuel (Hydrogen).
Rest assured ... When the sun runs low on Hydrogen, it'll go through several complex changes, and it'll end up at much much lower temperature, with much much lower energy output.
An elephant kicks a 2.5 kg rock that is initially at rest. The
net force on the rock varies with time as shown below.
What is the rock's change in momentum between 0 ms
and 20 ms?
Answers
0.20Answer:
Explanation:
What direction does energy transfer to the direction of a light wave
Answers
Answer:
light is a transverse wave. The direction of energy transfer is perpendicular to the motion of the wave
Explanation:
Light is an example of a wave that transfers energy through empty space. How are all mechanical waves similar? The waves caused by an earthquake are good examples of energy transfer. The disturbed ground shakes from side to side and up and down as the waves move through it,
What is the downward pull on an object due to gravity?
mass
weight
acceleration
velocity
Answers
Answer:
Weight
Explanation:
WEIGHT - downward pull to the center of earth due to gravity
ACCELERATION - the rate of change of velocity
VELOCITY - rate of change if displacement in time
The major difference between the mass and weight is that mass of an object can never be zero but weight can be zero. The downward pull on an object due to gravity is called the weight. The correct option is B.
What is weight?The measure of the force of gravity acting on a body is defined as the weight. Actually weight is a force and its SI unit is Newton (N). The weight of an object depends on the mass and acceleration due to gravity.
The formula used to calculate the weight is:
w = mg
m = Mass of an object
g = Acceleration due to gravity
Weight is found to be a vector quantity. Because it has both magnitude and direction. It is directed towards the center of the earth or other gravity well.
When objects fall to the ground, it is the gravity which accelerates them. So the force of gravity which pulls the object downward is called the weight.
Thus the correct option is B.
To know more about weight, visit;
https://brainly.com/question/30189157
#SPJ7
Which is a unit of momentum?
A) N-m/s
B) kg-m/s
C) kg-m/s2
D) N-m/s2
please hurry i need help asap, will mark brainliest
Answers
Answer:
unit of momentum is kgm/s2
The unit for momentum can be Newton-second (Ns). In the CGS system, if the mass is in grams and the velocity in centimeters per second, then the unit of momentum will be gram-centimeters per second (g⋅cm/s).
What is momentum ?"Momentum, product of the mass of a particle and its velocity. Momentum is a vector quantity; i.e., it has both magnitude and direction. Isaac Newton's second law of motion states that the time rate of change of momentum is equal to the force acting on the particle. See Newton's laws of motion."
Know more about momentum here
https://brainly.com/question/4956182
#SPJ2
HELP PLS 100 POINTS TAKING TEST RN
Suppose you are in a car that is going around a curve. The speedometer reads a constant 30
miles per hour. Which of the following is NOT true?
You and the car are accelerating.
Your speed is constant.
Your velocity is constant.
Your acceleration is constant.
Answers
Answer:
sorry I hate when people press your question and answer with a fake answer for points, however you said it was 100 points and it's not even close lol but it is "your speed Is constant" that is not true
What is the action and reaction if a person takes a step back
Answers
Answer:
action is backward and i guess reaction is sad
II. What examples can you find in your home that are examples of kinetic and potential energy (name two for each type
of energy)?
11. Kinetic:
12. Kinetic:
13. Potential
14. Potential:
Answers
Answer:
11. A door accelerating when pushing it.
12. A person sliding along the floor.
13. Water dropping from the faucet.
14. Courtains descending when loosening them.
Explanation:
For kinetic energy, any example that does not move horizontally will do. Something accelerating or decelerating is a good example (Ek=1/2mv^2, where v is velocity).
For potential energy try to think of things moving vertically. Potential energy comes from the height of an object (Ep=mgh, where h is height).
Notice that example 13 and 14 represent potential energy turning into kinetic energy, height becomes lower, so velocity increases.
Is this right? Please help me
Answers
Answer:
It would be C
Explanation:
The brain operates on two levels, one of them is unconscious.
Martha, a first-grade teacher, is worried that if doesn't stay In at work to grade papers her principal will think she is lazy She is also worried that if she stays late at work her partner will be angry. This of conflict is known as
Answers
Answer:
Character vs self
Explanation:
The reason is because Martha is thinking to much about the negative things and it is making her feel like she is fighting her own body for control.
A new Chevy truck comes out on the market. In an advertisement it says that it has a faster engine that Ford’s new truck. If this this statement is true, then it means that both engines do the same amount of ______________________ but different amount of _____________________.
work, power
power, work
not enough information is given
Answers
what are the rocky planets? theres more in the attachment
HELP ME PLS
Answers
Answer:
Explanation:
The rocky planets include Mercury, Venus, Earth, and Mars. they are made up of rocks and metals and have solid surfaces.They are the closest four planets to the Sun. The gas giants are Neptune, Uranus, Saturn, and Jupiter. they are further from the sun and are in the outer part of the solar system. I hope this helps!
One degree of longitude at the equator is approximately 111 km. As we move north or south the size of a degree changes. What is the distance that each degree of longitude has at the poles?
Answers
ALL of the meridians of longitude converge (come together) at the North and South poles. So at a pole, the distance between different longitudes is ZERO.
if you're standing at the North or South pole, you're located at EVERY longitude, because any other longitude is zero distance from you.
You're also located at NO longitude. Because . . .
==> If you're standing at the North pole and you take one step, it doesn't matter what direction you stepped, you've moved South. All directions from the North pole are South.
==> If you're standing at the South pole and you take one step, it doesn't matter what direction you stepped, you've moved North. All directions from the South pole are North.
A car accelerates northwest from 35 to 62 m/s in a time of 14 seconds. What is the acceleration?
a = Vf - Vi / t
A) 27 m/s2 northwest
B) 1.9 m/s2 northwest
C) -1.9 m/s2 northwest
D) 61 m/s
Answers
Answer:
B) 1.9 m/s2 northwest
Explanation:
Given parameters:
Initial velocity = vi = 35m/s
Final velocity = vf = 62m/s
Time = 14s
Unknown:
Acceleration = ?
Solution:
Acceleration is the rate of change of velocity with time.
Acceleration = [tex]\frac{Vf - Vi}{t}[/tex]
Vf is the final velocity
Vi is the initial velocity
t is the time taken
Acceleration = [tex]\frac{62 - 35}{14}[/tex] = 1.93m/s² northwest
1. A heat engine has a cold reservoir that is 285 degrees Kelvin which accepts 370 J of heat, and a hot reservoir that is 371 degrees Kelvin which gives off 425 J of heat. Calculate the maximum and actual efficiencies of this engine.
2. A system that has a total change in entropy of 675 J/K and has received 243 J of heat energy will be at what temperature?
3. Assume that the above system maintains a constant pressure, and increases in volume by 2.5 m 3 while doing this work. What is the pressure of the system?
Answers
I can't help with this one.
The maximum efficiency of the heat engine is 23%.
The actual efficiency of the heat engine is 13%.
The temperature of the system is 273.36 ⁰C.
The pressure of the system is 607.5 Pa.
The given parameters:
Cold reservoir temperature, Tc = 285 KHeat, qc = 370 JHot reservoir temperature, Th = 371 KHeat of the hot reservoir, qh = 425 JThe maximum efficiency of the heat engine is calculated as follows;
[tex]\eta = 1- \frac{T_c}{T_h} \\\\ \eta = 1 - \frac{285}{371} \\\\ \eta = 0.23\\\\ \eta = 23 \ \%[/tex]
The actual efficiency of the heat engine is calculated as follows;
[tex]\eta = 1 - \frac{q_c}{q_h} \\\\ \eta = 1 - \frac{370}{425} \\\\ \eta = 0.13\\\\ \eta = 13\ \%[/tex]
The temperature of the system is calculated as follows;
[tex]\Delta S = \frac{\Delta H}{T} \\\\ T = \frac{\Delta H}{\Delta S}\\\\ T = \frac{243}{675} \\\\ T = 0.36 \ K\\\\ T = 273.36 \ ^0C[/tex]
The pressure of the system is calculated as follows;
[tex]W = P \Delta V\\\\ P = \frac{W}{\Delta V} \\\\ P = \frac{243}{2.5} \\\\ P = 607.5 \ Pa[/tex]
Learn more about efficiency of heat engine here: https://brainly.com/question/10955336
please help!!! 50 POINTS
1) The diagram below models the energy involved in a reaction that changes methane gas and oxygen into carbon dioxide and water.
The graph shows a certain level of energy of reactants C H2 + 2 O2, which increases on the breaking of bonds as the atoms are separated. The energy is then consumed when the making of bonds decreases the energy of products, C O2 + 2 H2 O, to a level much lower than the energy of reactants. The energy change of negative delta H depicts the exothermic reaction.
Which observations about the energy released in making the bonds are correct?
a) It is greater than the energy absorbed in breaking the bonds. The excess is converted to chemical energy.
b) It is greater than the energy absorbed in breaking the bonds. The excess is converted to thermal energy.
c) It is less than the energy absorbed in breaking the bonds. The excess is converted to thermal energy.
d) It is less than the energy absorbed in breaking the bonds. The excess is converted to chemical energy.
2) Carbon dioxide is an example of a molecule where the component atoms of carbon and oxygen are held together by chemical bonds. Which statement correctly describes the reason for these chemical bonds?
a) The nuclei and electrons of the atoms are attracted to each other.
b) The strong nuclear energy bonds the atoms together.
c) The combination of chemical energy stored in each atom makes the bonds strong.
d) The structure of atoms increases their atomic energy, which creates the bonds.
3) When burning fuel for cooking, the pan and the food absorb energy and heat up. In this process, which form of energy is chemical energy converted into?(1 point)
a) thermal energy
b) atomic energy
c) mechanical energy
d) radiant energy
4) Which of the following statement/s about the energy involved in a chemical reaction is/are correct?
I. The energy stored in chemical bonds is kinetic energy.
II. The total energy is conserved during a chemical reaction.
III. Chemical energy can be converted to other forms of energy.
IV. Energy is needed to both break bonds and form new bonds.
a) III and IV only
b) II and III only
c) II, III, and IV only
d) I only
5) Burning coal results in several energy transformations to generate electricity. Which statement is correct about the chemical energy stored in chemical bonds between atoms when coal is burned?
a) It allows the bonds to form and then break.
b) It helps transform kinetic energy to potential energy.
c) It increases the number of atoms.
d) It converts to thermal energy.
thank you!!
Answers
Answer:
Explanation:
1. It is greater than the energy absorbed in breaking the bonds. The excess is converted to thermal energy.
2. The nuclei and electrons of the atoms are attracted to each other
3. thermal energy
4. II and III only
5. It converts to thermal energy.
difference between input work and output work with table
Answers
Answer:
Explanation:
Input work is the work done on a machine as the input force acts through the input distance. ... Output work is the work done by a machine as the output force acts through the output distance. The machine does to the object to increase the output distance.
A 7.20x10^3 N spacecraft travels away from the Earth. What is its weight when it is a) 6.38×10^3 km
and b) 1.28x10^4 km from the surface of the Earth?
Answers
Answer:
1,252
Explanation:
A layer of water Δx m thick which lies x m above the bottom of the tank will be rectangular with length 8 m. Using similar triangles, we can see that it will have widt of_____m
Answers
Answer:
x
Explanation:
The question relates to the energy required to pump water out of the
spout at the top of the triangular prism tank.
The width of the layer of water Δx thick is x m.
Reasons:
The location of the layer Δx m thick = x meters above the bottom
The length of the triangular (cross-section) prism tank = 8 meters
The length of the layer Δx thick layer = 8 meters
From the attached drawing of the cross-section of the tank, we have;
The height of the triangular tank cross-section = 3 meters
The length of the base of the triangular cross-section = 3 meters
By similar triangles, we have;
[tex]\dfrac{Height \ of \ Tank}{Base \ length \ of \ tank}= \dfrac{Height \ of \ layer \ with \ thickness \ \Delta x }{Width \ of \ layer \ with \ thickness \ \Delta x}[/tex]
Which gives;
[tex]\dfrac{3}{3} =\dfrac{x}{Required \ width}[/tex]
[tex]\dfrac{3}{3} =1 = \dfrac{x}{Required \ width}[/tex]
Required width × 1 = x
The required width = x m
Learn more here:
https://brainly.com/question/8830987
https://brainly.com/question/15695639
https://brainly.com/question/13507755
Tafu is working with subatomic particles in the physics lab. a positron is traveling in a straight line down the particle accelerator. tafu models its position with the function p(t)= t2 t â 1 where t>1. in the limit calculations below, if you need to use -â or â, enter -infinity or infinity. (a) calculate the limit
Answers
Answer:
Infinity
Explanation:
When you have a limit approaching infinity one method you can use is to remember that the highest power dominants all of the other ones so when we have (t^2)/t-1 like in your problem, we see that t^2 has the highest power of 2 so if that's going to infinity and it's not being divided by any powers higher than it will just be inifinity.
We have that for the Question, it can be said that in the limit calculations below, if you need to use -â or â, enter -infinity or infinity. the limit is
[tex]Lim_{t->\infty} p(t)= \infty[/tex]
From the question we are told
Tafu is working with subatomic particles in the physics lab. a positron is traveling in a straight line down the particle accelerator.tafu models its position with the function
p(t)= t2 t â 1 where t>1.
in the limit calculations below, if you need to use -â or â, enter -infinity or infinity.
(a) calculate the limit
Generally the equation for the Question is mathematically given as
[tex]p(t)=\frac{t^2}{t-1}\\\\Therefore\\\\For Lim_{\infty}\\\\We have\\\\ Lim_{t->\infty} p(t)= Lim_{t->\infty}\frac{t^2}{t-1}\\\\[/tex]
Since, the equivalent degree of numerator (t^2) is greater than that of the denominator
[tex]Lim_{t->\infty} p(t)= \infty[/tex]
For more information on this visit
https://brainly.com/question/23379286
PLEASE HELPPPPPPPPPP I WILL GIVE YOU BRAINLIEST Catalina's class wants to determine if boys or girls recycled more paper each day. They set up separate recycling bins in the classroom and labeled them "Boys" and "Girls." The students then placed their paper items in the correct bins. Which of the following should the students do each day before emptying the bins?
Answers
Answer:
what are the answer choices
Explanation:
i dont know the choices so i say count the stuff they recycle, and add the score to the days before.
Is gravitational energy a form of kinetic energy or potential energy? Why do you think that?
Please help due today!!
Answers
Answer:
When something is lifted, work is done on the object against the pull of gravity. This work is converted to a form of potential energy called gravitational potential energy. When the item falls towards Earth like an apple from a tree, gravitational potential energy is converted into kinetic energy.
How much power does an Ox pulling a plow 20 m cross a field, exerting 120J of work over a period of 15 s?
Answers
Answer:
8W
Explanation:
Given parameters:
Distance covered = 20m
Work done = 120J
Time = 15s
Unknown:
How much power does the Ox exerts = ?
Solution:
Power is the rate at which work is being done
Power = [tex]\frac{Work done }{time}[/tex]
Power exerted by ox = [tex]\frac{120}{15}[/tex] = 8W
Give an example of speed making a difference in the amount of kinetic energy. Tell how you know that kinetic energy amount is different in your example.
Please help this is due today
Answers
Answer:
1. A car moving 40 mph has four times as much kinetic energy as one moving 20 mph, while at 60 mph a car carries nine times as much kinetic energy as at 20 mph. Thus a modest increase in speed can cause a large increase in kinetic energy.
PLZ MARK BRAINLIEST THANK AND FIVE STAR:)
Answer:
a car moving 40mph has four times as much kinetic energy as one moving 20 mph, while at 60 mph a car carries nine times as much kinetic energy as at 20 mph.
if you need any more info just dm me
