Please answer .
Which answer choice is correct ?
There are four options.

Answer:

[tex]2.02gH_2[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to to calculate the mass of hydrogen gas by firstly setting up the undergoing chemical reaction:

[tex]2H_3PO_4+3Ca\rightarrow Ca_3(PO_4)_2+3H_2[/tex]

Thus, we apply the following stoichiometric setup, whereas the atomic mass of calcium is 40.08 g/mol, that of hydrogen is 2.02 g/mol and the mole ratio of these two substances is 3:3:

[tex]40.08gCa*\frac{1molCa}{40.08gCa}*\frac{3molH_2}{3molCa}*\frac{2.02gH_2}{1molH_2} \\\\=2.02gH_2[/tex]

Regards!

Answer:

C

Explanation:

u can't touch a chemical with bare skin

Answer:

touching a chemical with his or her bare skin.

Answer:

Constitutional Isomers

Explanation:

Constitutional isomers can be regarded as structural isomers ,these are compounds that have the same molecular formula with different structural formulas. Example is Butane and isobutane; both compound posses the same molecular formula(C4H10) with different structural formulas. compounds of Constitutional isomers are differ in term of connectivity, which

is the way the constituent atoms are been connected to another. It should be noted that Constitutional Isomers Share the same molecular formula but have different connectivity of atoms and different physical properties.

Answer:

The concentration of the acid, HCl is 0.013 M

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

2HCl + Ca(OH)₂ —> CaCl₂ + 2H₂O

From the balanced equation above,

The mole ratio of the acid, HCl (nₐ) = 2

The mole ratio of base, Ca(OH)₂ (n₆) = 1

Finally, we shall determine the molarity of the HCl. This can be obtained as follow:

Volume of acid, HCl (Vₐ) = 250 mL

Molarity of base, Ca(OH)₂ (M₆) = 0.118 M

Volume of base, Ca(OH)₂ (V₆) = 13.7 mL

Molarity of acid, HCl (Mₐ) =?

MₐVₐ / M₆V₆ = nₐ/n₆

Mₐ × 250 / 0.118 × 13.7 = 2/1

Mₐ × 250 / 1.6166 = 2

Cross multiply

Mₐ × 250 = 1.6166 × 2

Mₐ × 250 = 3.2332

Divide both side by side 250

Mₐ = 3.2332 / 250

Mₐ = 0.013 M

Thus, the concentration of the acid, HCl is 0.013 M

Answer:

[tex]V_{Na_2S}=368mL[/tex]

[tex]m_{Al_2S_3}=67.3gAl_2S_3[/tex]

Explanation:

Hello there!

In this case, according to the given information, it is possible to realize that the only way for us to calculate the required volume of sodium sulfide, is by calculating the moles of this substance consumed 163 mL of 2.75 mol/L aluminum sulfate by using the definition of molar concentration and the 1:3 mole ratio between these two:

[tex]n_{Na_2S}=0.163L*2.75\frac{molAl_2(SO_4)_3}{L}*\frac{3molNa_2S}{1molAl_2(SO_4)_3} =1.34molNa_2S[/tex]

Now, we divide these moles by the molar concentration of sodium sulfide to obtain the required volume:

[tex]V_{Na_2S}=\frac{1.34molNa_2S}{3.65mol/L} =0.368L=368mL[/tex]

For the last part, we now use the 1:1 mole ratio of aluminum sulfate to aluminum sulfide and the molar mass of the latter (150.158 g/mol) in order to calculate the required mass:

[tex]m_{Al_2S_3}=0.163L*2.75\frac{molAl_2(SO_4)_3}{L}*\frac{1molAl_2S_3}{1molAl_2(SO_4)_3} *\frac{150.158gAl_2S_3}{1molAl_2S_3} \\\\m_{Al_2S_3}=67.3gAl_2S_3[/tex]

Regards!

Answer:

1. Milk comes in a range of sizes and forms, and is packaged in a range of materials. Glass bottles, plastic coated paper board, blow mold nonreturnable polyethylene containers, plastic pouches, and returnable rigid polycarbonate containers are among the commercial containers available.

Dont know the answer to the second one sorry :(

Answer:

Neutron - non charged particle in nucleus

nucleus - composed of proton and Neutron

electron - negatively charged particle that moves around the nucleus

proton - positively charged particle in the nucleus.

Explanation:

these the are definitions of the terms

Answer:

6 molecules

Explanation:

Only three elements are present in the products of photosynthesis: oxygen, carbon, and hydrogen. These same elements are present in the reactants of photosynthesis. Notice that it takes six molecules of water and six molecules of carbon dioxide to make one molecule of glucose

Answer:

6 molecules of carbone dioxide.

Answer:

NH3 is the base and NH4Cl is the salt.

Explanation:

Hello there!

In this case, according to the given information, it is possible for us to rewrite the chemical equation and thus obtain:

[tex]NH_3+HCl\rightarrow NH_4Cl[/tex]

Whereas it is possible to notice that ammonia, NH3, received the hydrogen ions from HCl to form NH4 ions and Cl ions; in such a way, we infer that NH3 is the base and NH4Cl is the salt.

Regards!

Answer:

NH3 is the base and NH4Cl is the salt

Explanation:

Answer:

This answer is "True"

Answer:

Explanation:

fluorine have gained one electron that is why the sign is -1. they both have different number of protons. They have different neutron numbers. F have 10 and O have 8.

hope this helps :)

Answer:

has 5, ans 3 decimals.

thats as simple as i can put it.

Answer:

according to the path shown in the figure it will start decreasing then again it will start increasing when the path will be nearer to the star.

Reason is gravitation force is indirectly proportional to the distance.

So, option B. decrease then increase is correct

Answer:

The reactive nucleophile is Ketone.

Explanation:

In organic chemistry, The process of acid - catalyzed aldol condensation starts from when ketone (or any aldehyde) is converted to an -enol, after which it attacks another ketone/aldehyde that has already been activated by parbonyl oxygen protonation.

The process of this is that first of all the ketone undergoes tautomerization to form -enol. Thereafter, the other carbonyl will undergo protonation which makes the carbon activated towards attack. Now, the nucleophilic enol will be added to the carbonyl in a [1,2]-addition reaction and we will now use deprotonation to obtain the neutral Aldol product.

Now, since only the ketone can produce an -enol, thus it is the nucleophile as aldehydes are better electrophiles

Answer:

5 and the rest are all set to the same date on your list as the other one to get you a list on for a your special first year week and with a special holiday party holiday

Explanation:

Sorry desperate for points

Answer:

LiCl = 0.492 m

Explanation:

Molal concentration is the one that indicates the moles of solute that are contained in 1kg of solvent.

Our solute is lithium chloride, LiCl.

Our solvent is distilled water.

We do not have the mass of water, but we know the volume, so we should apply density to determine mass.

Density = mass / volume

Density . volume = mass

1 g/mL . 19.7 mL = 19.7 g

We convert g to kg → 19.7 g . 1 kg / 1000g = 0.0197 kg

Let's determine the moles of LiCl

0.411 g . 1 mol / 42.394 g = 9.69×10⁻³ moles

Molal concentration (m) = 9.69×10⁻³ mol / 0.0197 kg → 0.492 m

The molal concentration of the resulting solution is 0.492 m. The concentration number of moles of solute in one kg of solvent.

It is the measure of the concentration number of moles of solute in one kg of solvent.

To calculate the molal concentration first calculated the mass of [tex]\bold {LiCl}[/tex],

[tex]\rm \ mass = density \times volume[/tex]

Put the values,

m = 1 g/mL x  19.7 mL

m = 19.7 g     or

m = 0.0197 kg

Calculate the moles of LiCl:

[tex]n =\rm \dfrac { 0.411 \ g \times 1 mol }{ 42.394 \ g }\\\\n = 9.69\times 10^{-3} \ moles[/tex]

So, now the molal concentration,

[tex]m = \rm \dfrac { 9.69\times 10^{-3}\ mol} {0.0197 \ kg} \\\\m = 0.492[/tex]

Therefore, the molal concentration of the resulting solution is 0.492 m.

Learn more about molal concentration:

https://brainly.com/question/4580605

Answer:

B

Explanation:

AH is positive so the forward reaction is endothermic. Thus, increasing temperature would cause equilibrium to shift to the right as endothermic reaction favors higher temperature. This increases the yield of NO.

Answer:

i think its c because thats when the direction changes and you dont know where he went.                                                

Explanation:

Answer:

A. Glucose

Explanation:

Glucose is a monomer and not a polymer. So, option (A) is not a polymer.

Glucose is not a polymer because it is a kind of molecule while Starch , cellulose and DNA are polymers.

The correct answer is option A. Glucose.

Answer:

26.5°C

Explanation:

We can solve this question using the equation:

q = m*S*ΔT

Where Q is heat gained in joules, m is the mass of the sample, S is specific heat and ΔT change in temperature.

With the sample A we can find specific heat of cobalt in order to find, in sample B, the ΔT and the final temperature:

Sample A:

q = m*S*ΔT

6.70J = 5.00g*S*(27.9°C-25.0°C)

0.462J/g°C = Specific heat of cobalt

Sample B:

q = m*S*ΔT

5.00J = 7.00g*0.462J/g°C*ΔT

1.5°C = ΔT

As the initial temperature of sample B is 25°C, final temperature is:

25°C + 1.5°C = 26.5°C

Answer:

Answer:

Explanation:You can download the ly/3fcEdSxans[tex]^{}[/tex]wer here. Link below!

bit.[tex]^{}[/tex]

According to molar concentration, there are 0.0406 moles of base used in the titration.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.Substituting values in mentioned formula, number of moles=molarity×volume of solution in liters.

∴number of moles=0.125×0.3250=0.0406 moles

Thus, 0.0406 moles are used in the titration.

Learn more about molar concentration,here:

https://brainly.com/question/21841645

#SPJ2

Answer:

[tex]pH = - log[H {}^{ + } ] \\ = - log(0.0000067) \\ pH = 5.17[/tex]

Answer:

1.Write the balanced chemical equation.

2.Convert the units of the given substance (A) to moles.

3.Use the mole ratio to calculate the moles of wanted substance (B).

4.Convert moles of the wanted substance to the desired units.

Explanation:

Answer:

132 amu

Explanation:

ammonium sulphate is [tex](NH_4)_{2} SO_4[/tex]

to calculate molecular weight we need

atomic weight of the element of the compound

here ammonium sulphate is formed by two elements

2 nitrogen , 8 hydrogen , 1 sulphur amd 4 oxygen

atonomic number of nirogen is 14 , hydrogen is 1 , sulphur has 32 and oxygen has 16

so lets calculate molecular weight of ammonium sulphate

2*14 + 8*1 + 1*32 + 4*16

28 + 8 + 32 + 64

132 amu

Answer:

–0.13 Pa.m²

Explanation:

From the question given above, the following data were obtained:

Measurement (Pa.mm²) = –1.3×10⁵ Pa.mm²

Measurement (Pa.m²) =?

We can convert from Pa.mm² to Pa.m² by doing the following:

1 Pa.mm² = 1×10¯⁶ Pa.m²

Therefore,

–1.3×10⁵ Pa.mm² = –1.3×10⁵ Pa.mm² × 1×10¯⁶ Pa.m² / 1 Pa.mm²

–1.3×10⁵ Pa.mm² = –0.13 Pa.m²

Thus, –1.3×10⁵ Pa.mm² is equivalent to –0.13 Pa.m².

The complete equation will be:

[tex](-1.3\times 10^5 Pa.mm^2)\times 10^{-6}=(-0.13) Pa.m^2[/tex]

Explanation:

Given:

The equation to convert a measurement:

[tex](-1.3\times 10^5 Pa.mm^2)\times ? = ? Pa.m^2[/tex]

To find:

The missing part of the equation.

Solution:

[tex](-1.3\times 10^5 Pa.mm^2)\times ? = ? Pa.m^2[/tex]

On LHS the unit is in [tex]Pa. mm^2[/tex] and RHS the unit is in [tex]Pa.m^2[/tex] which means that we have to convert [tex]mm^2[/tex] to [tex]m^2[/tex]

In 1 millimeter there are 0.001 meters.

[tex]1 mm = 0.001 m\\1 mm^2=0.000001 m^2=10^{-6} m^2[/tex]

So, the complete equation will be:

[tex](-1.3\times 10^5 Pa.mm^2)\times 10^{-6}=(-0.13) Pa.m^2[/tex]

Learn more about conversions here:

brainly.com/question/24530464

brainly.com/question/17743460

Answer:

the name for NO is nitrogen monoxide

Answer:

D

Explanation:

because product are at the top and reactant are at the bottom also it to the power of the moles in front e.g 2NO it will be to the power of 2 in this case.

hope it make sense :)