mass of pentane : = 30.303 g
moles of Al₂(CO₃)₃ : = 0.147
Further explanationGiven
1. Reaction
C₅H₁₂+8O₂→6H₂O+5CO₂.
45.3 g water
2. 2AlCl₃ + 3MgCO₃ → Al₂(CO₃)₃ + 3MgCl₂
37.2 MgCO₃
Required
mass of pentane
moles of Al₂(CO₃)₃
Solution
1. mol water = 45.3 : 18 g/mol = 2.52
From equation, mol ratio of C₅H₁₂ : H₂O = 1 : 6, so mol pentane :
= 1/6 x mol H₂O
= 1/6 x 2.52
= 0.42
Mass pentane :
= mol x MW
= 0.42 x 72.15 g/mol
= 30.303 g
2. mol MgCO₃ : 37.2 : 84,3139 g/mol = 0.44
mol Al₂(CO₃)₃ :
= 1/3 x mol MgCO₃
= 1/3 x 0.44
= 0.147
Put the levels of organization in order from smallest to largest
Organism
Community
Ecosystem
Population
Write the balanced chemical equations for the following double-replacement reactions.
(Steps: skeleton equation/count number of atoms in reactants and products/balance both sides)
Q24. Aqueous lithium iodide and aqueous silver nitrate react to produce solid sikrer iodide and
1 aqueous lithium nitrate.
A24.
I need the balanced chemical equation for this question
The balanced equation :
LiI(aq) + AgNO₃(aq) --> AgI(s) + LiNO₃(aq)
Further explanationGiven
Word equation
Required
Balanced equation
Solution
There are 3 ways to express a chemical equation:
word equation skeleton equation balanced equationSkeleton equation for reaction above :
LiI(aq) + AgNO₃(aq) ⇒ AgI(s) + LiNO₃(aq)
If we look at this reaction, all the cations and anions have a charge of 1 (+1 or -1) so the balanced reaction between the skeleton equation and the balanced equation is the same
HELP LIKE HELP HURRY I HAVE 2 hours. To finish
Answer: hello, the answer would be rotates, revolves
hope this helps :)
Explanation:
10. There are two bears that both have the same proteins for ear shape in their cells. The bears have
different parents. What can you say about the bears' ear shape?
Answer:
They will have the same ear shape since their proteins connect in the same ways to determine ear shape.
Explanation:
I majored in Chemistry
Answer:
They will have the same ear shape since their proteins connect in the same ways to determine ear shape.
Explanation:
would using a strainer be filtration?
Answer:
To some extent, yes
Explanation:
7. Jasmine wants to prevent getting burned by accidently touching a hot metal pipe, What would be the worst
insulator for her to use to put around the pipe?
a, Glass
b. Rubber
c. Cloth
d. Wood
Answer:
A) Glass
Explanation:
Glass is a conductor, so it allows heat to go through it (Ex. Touching a pie pan that came right out of the oven)
Rubber is an insulator, so heat has a hard time passing through (Ex. Using a rubber grip on a cast iron pan.
Cloth is also an insulator, so heat has a hard time passing through (Ex. Using a pot holder to prevent the counter from getting scarred)
Wood is also an insulator, so heat has a hard time passing through (Ex. Bedding for a rabbit hutch)
Hope this helps!!
C3Hg + 02 → CO2 + H2O
This chemical equation represents the combustion of propane. When correctly balanced, the coefficient for water
is
16.
2.
8.
4.
Answer:
4
Explanation:
The following equation, which depicts the combustion of propane, is given in this question as follows:
C3H8 + 02 → CO2 + H2O
However, this equation is not yet BALANCED because the number of atoms of each element is not the same on the reactant and product side. To balance the equation, we make use of COEFFICIENT to ensure that the number of atoms of each element on both side correlates.
The balanced equation is as follows:
C3H8 + 502 → 3CO2 + 4H2O
Therefore, the coefficient for water (H2O) after balancing the equation is 4.
The study of chemicals is called chemistry.
The correct answer is D.
The equation is not yet BALANCED because the number of atoms of each element is not the same on the reactant and product sides.
To balance the equation, we make use of COEFFICIENT to ensure that the number of atoms of each element on both sides correlates.
After balancing the equation is as follows:
[tex]C_3H_8 + 50_2 → 3CO_2 + 4H_2O[/tex]
Hence, the correct answer is 4 which shows the balanced water.
For more information, refer to the link:-
https://brainly.com/question/12985618
Which statement best describes the relationship between photosynthesis and cellular respiration?
Photosynthesis removes carbon from the atmosphere, and cellular respiration releases carbon back into the atmosphere.
Photosynthesis is part of the carbon cycle, and cellular respiration is not.
Only plants perform photosynthesis, and only animals perform cellular respiration.
Photosynthesis releases carbon into the atmosphere, and cellular respiration removes carbon from the atmosphere.
Answer:
Photosynthesis removes carbon from the atmosphere, and cellular respiration releases carbon back into the atmosphere.
Explanation:
The first option clearly expresses the relationship between photosynthesis and cellular respiration.
Cellular respiration releases carbon back into the atmosphere whereas photosynthesis removes the carbon from the atmosphere.
Photosynthesis is the process whereby green plants manufacture their food using carbon dioxide and water.
In cellular respiration, the product of the photosynthesis is used by organisms to produce energy.
what happend to that mass when the forest burns?
Answer:
When the forest burns we will lose a huge amount of oxygen and animals will lose their home.
Explanation:
What is happening at x ?
1
a)Put the metals used (magnesium, copper, iron, zinc)
in order from the least reactive to the most reactive.
The more reactive metal will displace the other metal
from the solution of its metal salt.
Answer:
Magnesium
Zinc
Iron
Copper
Explanation:
The given elements are:
Magnesium, copper, iron and zinc
We are to put them in the order from the least reactive to the most reactive of all.
To solve this problem, we simply use the activity series of metals to arrange the elements.
The activity series arranges metals from the most reactive to the least reactive. The more reactive metals displaces the lesser one from solutions.
So;
Magnesium
Zinc
Iron
Copper
What is the temperature change that 725 g of aluminum will undergo when 2.35 x 104
J of thermal energy are added to it?
Answer:
36°C
Explanation:
Given parameters:
Mass of aluminum = 725g
Quantity of heat = 2.35 x 10⁴J
Unknown:
Temperature change = ?
Solution:
To solve this problem, we simply use the expression below:
The quantity of energy is given as:
Q = m C Δt
Q is the quantity of energy
m is the mass
C is the specific heat capacity of aluminum = 0.9J/g°C
Δt is the change in temperature
The unknown is Δt;
Δt = [tex]\frac{Q}{mc}[/tex] = [tex]\frac{2.35 x 10^{4} }{725 x 0.9}[/tex] = 36°C
How many grams are in 25.0 moles of carbon tetrachloride (CCI)?
Answer:
3.84 kg
Explanation:
CCl4 molar mass: 153.82 g/mol
n = mass / molar mass
25 moles = mass / 153.82 g/mol
mass = 25 x 153.82
mass = 3845 g or 3,84 kg
In the laboratory you dissolve 12.7 g of silver fluoride in a volumetric flask and add water to a total volume of 125. mL. What is the molarity of the solution?
Answer:
Molarity = 2.4 M
Explanation:
Given data:
Mass of silver fluoride = 12.7 g
Volume of water = 125 mL (125 mL× 1 L /1000 mL = 0.125 L)
Molarity of solution = ?
Solution:
Number of moles of silver fluoride:
Number of moles = mass/molar mass
Number of moles = 12.7 g/ 41.98 g/mol
Number of moles = 0.30 mol
Molarity:
Molarity = number of moles of solute / volume in L
Molarity = 0.30 mol / 0.125 L
Molarity = 2.4 M
An object has a volume of 825 cm3 and a density of 13.6 g/cm3. Find its
mass
The mass of an object is the product of its volume and density. The mass of a the object with a volume of 825 cm³ and a density of 13.6 g/cm³ is 11220 g.
What is density ?Density of substance is the measure of its mass per unit volume. It describes how closely its particles are packed. Density depends on the bond type, temperature and pressure.
Volume of the object is the space occupied by its particles. Volume can be expressed in L, ml, cm³, dm³ etc. Only solids and liquids has a definite volume and the volume of gases is that of the container.
Give that, volume of the object = 825 cm³
density = 13.6 g/cm³
Mass = volume × density
m = 825 cm³ × 13.6 g/cm³ = 11220 g
Therefore, the mass of the object is 11220 g.
Find more on density:
https://brainly.com/question/15164682
#SPJ2
Arrange the following atoms in order of increasing size (radius).
Te, S, Se
K, Br, Ni
Ba, Si, F
Answer:
S<Se<Te
Br<Ni<K
F<Si<Ba
Explanation:
Do the following ! I'LL MARK THE BRAINLEST!
ITS SCIENCE!
Answer:
it's easier to look it up
Explanation:
4. The chemical energy in the person's body is transformed into when they peddle the bike, causing the generator to rotate. Some energy in the bike wheel is lost to . The generator produces electricity, which heats the water, causing it to produce thermal energy in the form of steam. When the person's chemical energy runs out, how do you replenish it? 5. Change the initial energy source to sun, the intermediate energy source to the solar panel, and the final energy source to the windmill. In this system, is produced from the sun and transformed into electricity in the solar panel. Both of these types of energy are considered forms of . The result of this system is that the windmill produces mechanical energy. 6. Try a few more scenarios, choosing different initial, intermediate, and final energy sources. Observe places where energy is transformed and lost. Creating systems with the least amount of energy is important in engineering design.
Answer:
Mechanical Energy, Thermal Energy, By Feeding Them Food, Light Energy, Electromagnetic Energy, it's right on Edge
Explanation:
Answer:
1. mechanical energy, 2. thermal energy, 3. by feeding them food, 4. light energy 5. electromagnetic energy
Explanation:
got it right on edg ;))
what mass of ZnCI2 can be prepared from the reaction of 3.27 grams of zinc with 3.30 grams of HCI?
Zn + 2HCI —-> ZnCI2 + H2
Answer:
Zn. + 2 HCl ----------> ZnCl2. + H2
Explanation:
Mass of Zn in mole = 3.27/ 65.38= 0.050010.... mol
Mass of HCl in mole = 3.3/ 73= 0.044....mol
Hence, limiting reagent is HCl
Molar mass of ZnCl2= 136.38g
Let mass of ZnCl2 be x
x = 3.3*136.38÷ 73 = 6.165...
So, the mass of ZnCl2 is 6.17 g
You need to make an aqueous solution of 0.150 M sodium fluoride for an experiment in lab, using a 500 mL volumetric flask. How much solid sodium fluoride should you add?
Answer:
Explanation:
Solution required is .15 M 500 mL sodium fluoride .
molecular weight of sodium fluoride = 42
one mole of sodium fluoride = 42 grams
No of moles contained in the solution of .15M , 500 mL solution
= .15 x 0.5 moles = .075 moles
1 mole = 42 g
.075 moles = .075 x 42 = 3.15 grams .
So mass of sodium fluoride required = 3.15 g .
Scientists often look at how much isotopes of ______
have decayed to help estimate the age
of a fossil or once-living material.
Answer:
If im correct it’s radioisotope
Explanation:
Scientists often look at how much of isotopes of : Carbon-14 have decayed
To determine the age of fossils archeologist make use of the carbon-14 dating ( i.e. making use of naturally occurring radioisotope ¹⁴C ) which is used to determine the age of fossils or material that were once in living on earth.
Carbon has about three (3) isotopes ( Carbon-12, Carbon-13 and Carbon-14 ) .but Carbon-14 isotope is most useful in determining the age of fossils and once-living things
Hence we can conclude that scientists often look at how much of isotopes of Carbon-14 have decayed to help estimate the age of fossils.
learn more : https://brainly.com/question/1296663
Which one of the following is a chemical property?
A. A wood block is less dense than water
B. Gold bar is shiny
C. Bubbles form when baking soda and vinegar are mixed.
D. Water turns from liquid to gas at 1000C.
pls help thx
The forming of bubbles when baking soda and vinegar are mixed is a result of chemical property.
Chemical PropertiesChemical properties of materials are properties that are due to the chemical composition of the materials.
The formation of bubbles when baking soda is mixed with vinegar is a result of the evolution of carbon dioxide gas.
Baking soda reacts with vinegar to produce carbon dioxide and other products according to the chemical equation below:
NaHCO3 + CH3COOH → CO2 + H2O + CH3COONa
More on chemical properties can be found here: https://brainly.com/question/1728902?referrer=searchResults
Water has a molar mass of 18.0 g/mol. How many particles of water do you drink if you drink 64 oz., or 1893 grams, of water in a day?
Answer:
[tex] \frac{1839}{18} = 102.16[/tex]
Take 102.16 and multiply by avogadros #
and you get 6.33 × 10^25 otherwise A
Answer:
Answer is A
Explanation:
I just took this.
Why would it be harder to jump on the planet Jupiter than on Earth?
HELP PLSSS
C₃ H8
What is the subscript for carbon in this molecule?
Answer:
3
Explanation:
Subscript basically tells you the number of element or ions present in a compound. In this case the subscript of carbon which is 3 denotes that only three carbon atoms is present in the compound.
When a compound such as X2Z4 is created, what would be the
correct simplified chemical formula?
Answer:
XZ2
Explanation:
There are different ways in which compounds can be represented. Broadly, we have three different types of formula;
- Structural formular: This shows how th atoms in te compound are connected to each other.
- Molecular formular: This shows the actual number of atoms of element present in the compound
- Empirical Formular: This is the simplest formular of a compound. It basically shows the number of atoms in simple ration to each other.
This question requires us to input the empirical formular;
X2Z4
The ratio of the elements is; 2 : 4 which can be simplified into 1 : 2
This means the empirical formular is XZ2
Low, gray, layered clouds that cover the sky and bring steady rain are O A. cumulus O B. cirrus O C. cumulonimbus OD. nimbostratus
Answer:
D Nimbostratus
Explanation:
Predictions about the future based on the position of planets is an example of physics biology earth science pseudoscience
Answer:
Pseudoscience
Explanation:
Predicting the future based solely on the position of the planets is an example of pseudoscience.
Pseudoscience is a body of knowledge that is not based on the scientific method but on some unverifiable/unprovable claims.
Predictions about the future can only be valid if it is based on the scientific method, not just about the position of the planet. The scientific method involves observation, hypothesis formulation, testing of the hypothesis through repeatable experiments, and arriving at conclusion.
Any other statement or belief that is not based on these procedures is said to be pseudoscientific.
Answer:
The answer to your question is pseudoscience.
Explanation:
I took the module 1 exam and got it right, yesterday.
Why are some energy resources more expensive to use than others?
Physical and chemical properties are used to describe and identify matter. Physical properties can be observed without changing the identity of the substance. Chemical properties can be observed by attempting to change the identity of a substance. What are two physical and chemical properties that you can use to help you identify a substance?
Extensive properties, such as mass and volume, depend on the amount of matter that is being measured. ... Both extensive and intensive properties are physical properties, which means they can be measured without changing the substance's chemical identity