solve the equation - 2(3x+5/x+2) -5(x+2/3x-5) = 3 , where x unequal -2 and x unequal 5/3
it's urgent
please quys
with solution
Answer:
Step-by-step explanation:
(a - b)(a + b) =a² - b²
(3x + 5)(3x -5) =(3x)² - 5² = 9x² - 25
(x +2)(x+2) = (x+ 2)² = x²+ 2*2*x+2² = x² + 4x + 4
(x+2)(3x -5 ) = x*3x - 5*x +2*3x +2*(-5)
= 3x² -5x +6x -10
= 3x² + x - 10
[tex]\frac{2*(3x+5)}{x+2}-\frac{5(x+2)}{3x-5}=3\\\\\frac{2*(3x+5)*(3x-5)}{(x+2)(3x-5)}-\frac{5*(x+2)(x+2)}{(3x-5)(x+2)}=3\\\\\frac{2*(9x^{2}-25)-5(x^{2}+4x+4)}{(3x-5)(x+2)}=3[/tex]
[tex]\frac{18x^{2}-25-5x^{2}-20x-20}{3x^{2}+x-10}=3\\\\\frac{18x^{2}-5x^{2}-20x - 25-20}{3x^{2}+x-10}=3\\\\[/tex]
13x² - 20x - 45 = 3*(3x² + x - 10)
13x² - 20x - 45 =9x² + 3x - 30
13x² - 9x² -20x - 3x - 45 + 30 = 0
4x² - 23x - 15 = 0
A pattern for a skirt calls for 1 7/8 yd of fabric. If Mary
Kate wants to make one skirt for herself and one for her
twin, how much fabric will she need?
Answer:
Mary Kate will need 3 6/8 yd of fabric.
Step-by-step explanation:
If Mary wants to make one skirt for herself AND her twin, that is equal to 2 skirts.
So if one skirt calls for 1 7/8 yd of fabric, multiply it by 2:
1 7/8 x 2
Convert 1 7/8 to an improper fraction and add 1 as a denominator for 2:
15/8 x 2/1 = 30/8
30/8 simplified is 3 6/8
Brainliest please?
whats the differnce in (5x+4)-(x+2)
Answer:
4x+2
Step-by-step explanation:
(5x+4)-(x+2)=(5-1)*x+(4-2)=4x+2
How do I find x and y?
Answer:
x = 20
y = 70
Step-by-step explanation:
Since B and D are parallel :
6x - 10 + 3x + 10 = 180 add/subtract like terms
9x = 180 divide both sides by 9
x = 20
angle represented by y and 6x - 10 are supplementary and their sum is 180
y + 6x - 10 = 180 replace x with 20
y + 6*20 - 10 = 180
y + 120 - 10 = 180
y + 110 = 180 subtract 110 from both sides
y = 70
Pls Help, Thanks
According to the partial construction shown, what is the next step in constructing a line perpendicular to a point on the line?
Place compass at point D, and draw an arc that intersects the arc above line DF.
Place compass at point F, and draw an arc that intersects the arc above line DF.
Place compass at point P, and draw an arc above line DF
Place compass at point P, and draw an arc below line DF
Step-by-step explanation:
First draw a lign segment like DF
Next keep the point on D make an arc by increasing the length of compass
As same keep the point on F make an arc lile same as before
Next there is apoint name it as any meeting on drew arc
connect it to the point with P
Helpppppppp pleaseeee!!!!!!!!
Answer:
29.5 square inches
Step-by-step explanation:
Let's divide the shape into 3 parts to make it easy for us to find the area.
- a wide triangle
- a triangle
- a shorter rectangle
For the wider rectangle, the area is;
A1 = 8 × 2 = 16 in²
For the triangle, the area is;
A2 = ½(7 - 2) × 3
A2 = 7.5 in²
For the shorter rectangle, the area is;
A3 = 3 × 2
A3 = 6 in²
Total area = A1 + A2 + A3 = 16 + 7.5 + 6 = 29.5 square inches
If f(x) = VX – 9 and g(x) = -6x – 3,
which statement is true?
Answer:
7
Step-by-step explanation:
In the figure below, triangle ABC is similar to triangle PQR:
A right triangle ABC with right angle at B and base BC is drawn. Length of AB is 4, length of BC is 2. A similar right triangle; triangle PQR, which is triangle ABC enlarged and reflected across a horizontal line, is drawn near it. The right angle is at Q. Angle A is congruent to angle P and angle C is congruent to angle R. The length of QR is 12.
What is the length of side PQ?
48
24
40
18
Answer:
24
Step-by-step explanation:
Since the triangles are similar the side lengths must be proportional
2/12 = 4/PQ cross multiply expressions
2PQ = 48 divide both sides by 2
PQ = 24
Match the vocabulary word to its correct definition.
1. mean
The mean is the average value of the data you collect. In statistics, you find the mean of your sample. Then you use that mean to approximate the mean of the entire population. If you want the mean of the data to be a good approximation of the mean of the entire population, your need to make sure that you collect a random sample. To find the mean, you find the sum of the data points you collected and divide it by the number of data points in the set. For example, if the data you collected was {3, 3, 6}. Then the mean would be (3 + 3 + 6) ÷ 3 = 12 ÷ 3 = 4. It's important to note that the mean does not have to be a data point in your set. You can generalize the formula as well. If you collect n data points {d1, d2, d3, … dn}, then the mean of your data set is . The Greek letter μ—pronounced "mu"—is used because the word "mean" begins with the letter "m." It is important that you divide by the number of data points in your set, n.
2. population
An experiment is a well-defined procedure under controlled conditions designed to gather data that tests a hypothesis. For example, you want to test the hypothesis that flowers grow faster when they are watered every other day as opposed to every day. Then you could water one set of plants every day and another set of plants every other day. What data would you collect? The height of each plant once a day. What conditions would you need to control? You would need to make sure that the groups of plants are treated the same in every other way by getting the same amount of sun and being maintained at the same temperature, etc.
3. experiment
Bias is the preference for a particular group or subset. In the example above, the bias was toward viewers who like sports. When your sample is not chosen at random, you introduce bias into your study. So, in a certain sense, a biased sample is the opposite of a random sample. Why? In a biased sample, some members of the population are more likely to be chosen than others. In a random sample, every member of the population is equally likely to be chosen. Bias may also occur in surveys. See "survey" below for more information on this type of bias.
4. sample
A population is the entire group you want to understand. So, in a certain sense, you can think of the population as the "opposite" of the sample because a sample is not the entire population. A sample is chosen subset upon that you use to draw conclusions about the entire population.
5. bias
Random means free from bias. So, if you choose a random sample from a population, every member of the population has an equal chance of being chosen. It should be pointed out that this "true randomness" is an ideal which is difficult to achieve in real world experiments conducted on real world populations. That is why statisticians make every effort to ensure their samples chosen as free from bias as is possible, that is, as randomly as possible under real world conditions.
6. survey
A sample is a subset chosen from a population. In most cases, you want a random sample. Why? A random sample has the best chance of accurately representing the entire population.
7. random
A survey is the means of collecting a sample. In statistics, a survey is often a question or set of questions. It is critical that the questions, like the sample itself, be free from bias. Bias in a question tends to favor one response. As an extreme example of a biased question about colors might be, "Don't you think blue is beautiful and yellow is yucky?" An unbiased form of the question might be, "Which color do you prefer, blue or yellow?" Though careful, statisticians might be concerned about the order in which the colors are offered, so that might further simplify the question to, "What is your favorite color?" This type of question is most free from bias because it does not suggest a response and therefore does not favor a response.
Answer:
1. mean-The mean is the average value of the data you collect. In statistics, you find the mean of your sample. Then you use that mean to approximate the mean of the entire population. If you want the mean of the data to be a good approximation of the mean of the entire population, your need to make sure that you collect a random sample. To find the mean, you find the sum of the data points you collected and divide it by the number of data points in the set. For example, if the data you collected was {3, 3, 6}. Then the mean would be (3 + 3 + 6) ÷ 3 = 12 ÷ 3 = 4. It's important to note that the mean does not have to be a data point in your set. You can generalize the formula as well. If you collect n data points {d1, d2, d3, … dn}, then the mean of your data set is . The Greek letter μ—pronounced "mu"—is used because the word "mean" begins with the letter "m." It is important that you divide by the number of data points in your set, n.
2. Population-A population is the entire group you want to understand. So, in a certain sense, you can think of the population as the "opposite" of the sample because a sample is not the entire population. A sample is chosen subset upon that you use to draw conclusions about the entire population.
3. Experiment-An experiment is a well-defined procedure under controlled conditions designed to gather data that tests a hypothesis. For example, you want to test the hypothesis that flowers grow faster when they are watered every other day as opposed to every day. Then you could water one set of plants every day and another set of plants every other day. What data would you collect? The height of each plant once a day. What conditions would you need to control? You would need to make sure that the groups of plants are treated the same in every other way by getting the same amount of sun and being maintained at the same temperature, etc.
4. Sample-A sample is a subset chosen from a population. In most cases, you want a random sample. Why? A random sample has the best chance of accurately representing the entire population.
5. Bais-Bias is the preference for a particular group or subset. In the example above, the bias was toward viewers who like sports. When your sample is not chosen at random, you introduce bias into your study. So, in a certain sense, a biased sample is the opposite of a random sample. Why? In a biased sample, some members of the population are more likely to be chosen than others. In a random sample, every member of the population is equally likely to be chosen. Bias may also occur in surveys. See "survey" below for more information on this type of bias.
6. Survey-A survey is the means of collecting a sample. In statistics, a survey is often a question or set of questions. It is critical that the questions, like the sample itself, be free from bias. Bias in a question tends to favor one response. As an extreme example of a biased question about colors might be, "Don't you think blue is beautiful and yellow is yucky?" An unbiased form of the question might be, "Which color do you prefer, blue or yellow?" Though careful, statisticians might be concerned about the order in which the colors are offered, so that might further simplify the question to, "What is your favorite color?" This type of question is most free from bias because it does not suggest a response and therefore does not favor a response.
7. Random-Random means free from bias. So, if you choose a random sample from a population, every member of the population has an equal chance of being chosen. It should be pointed out that this "true randomness" is an ideal which is difficult to achieve in real world experiments conducted on real world populations. That is why statisticians make every effort to ensure their samples chosen as free from bias as is possible, that is, as randomly as possible under real world conditions.
Step-by-step explanation:
It says what each of them are in each paragraph, you just need to match them up.
Hope this helps :)
Can someone help me with this question?
Answer:
y = ± 15
Step-by-step explanation:
Given
y² = 225 ( take the square root of both sides )
[tex]\sqrt{y^2}[/tex] = ± [tex]\sqrt{225}[/tex]
y = ± 15
That is y = 15, y = - 15
Since 15 × 15 = 225 and - 15 × - 15 = 225
y² = 225
y = √225
y = 15
y²= 225
y = √225
y = -15
y = ±15
Therefore values of y are 15 and -15
Must click thanks and mark brainliest
The diameter of the Moon is 3.5 × 10^3 km.
The diameter of the Sun is 1.4×10^6 km.
Calculate the ratio of the diameter of the Moon to the diameter of the Sun.
Give your answer in the form 1 : n
Answer:
1 : 400
Step-by-step explanation:
[tex]\frac{3.5 x 10^{3} }{3.5 x 10^{3} } : \frac{1.4 x 10^{6 } }{3.5 x 10^{3} }[/tex]
1 : .4 x [tex]10^{3}[/tex]
1 : 4 x [tex]10^{2}[/tex]
1 : 400
Does anyone know the answer plz ?
Answer:
x = 5; y = 5
Step-by-step explanation:
One angle is a right angle, so its measure is 90 degrees.
One angle measures 45 degrees, so the unknown angle must also measure 45 degrees.
x and y are opposite two 45-degree angles, so x = y.
In a 45-45-90 triangle, the ratio of the lengths of the sides is
1 : 1 : sqrt(2)
We have
x : y : 5sqrt(2)
x/1 = 5sqrt(2)/sqrt(2)
x = 5
y = 5
Mark made a sandwich that was 5 inches long and 7 inches high. If he cuts
the sandwich in half, what would be the diagonal length of the sandwich?
Explanation
a sanwich which is most commonly a square, has the side lengths of 5 and 5.
cuting this in half will give you a 45-45-90 triangle
the legs will be measure of x, and the hypotonuse will be x[tex]\sqrt{2}[/tex]
so the hypotonuse is 5[tex]\sqrt{2}[/tex]
The diagonal length of the sandwich after it is cut in half is approximately 6.106 inches.
How to calculate the lengthUsing the Pythagorean theorem, we can calculate the diagonal length as follows:
diagonal² = length² + height²
diagonal² = (5 inches)² + (3.5 inches)²
diagonal² = 37.25 inches²
Taking the square root of both sides, we find:
diagonal = √37.25 inches
Calculating the square root of 37.25, we get:
diagonal ≈ 6.106 inches
Therefore, the diagonal length of the sandwich after it is cut in half is approximately 6.106 inches.
Learn more about length
https://brainly.com/question/28108430
#SPJ2
Is the statement at the top true or false
Answer:
false
Step-by-step explanation:
these angles are horizonal
PLS HELP ME ON THIS QUESTION I WILL MARK YOU AS BRAINLIEST IF YOU KNOW THE ANSWER!!
Answer:
300 yd³
Step-by-step explanation:
Volume = lwh
l = 6
w = 5
h = 10
so, 6×5×10 = 300 yd³
Which of the following is an example of exponential growth?
A. Investing $1,000 at an annual interest rate of 3%, compounded monthly
B. A bacterial culture increases by 1,000 bacteria per day
C. The height of a tree increases by 2 feet each year
D. Water drips into a bucket at a rate of 2 pints each minute
An example of an exponential function is given as follows:
A. Investing $1,000 at an annual interest rate of 3%, compounded monthly.
What is an exponential function?An increasing exponential function is modeled by:
[tex]A(t) = A(0)(1 + r)^t[/tex]
In which:
A(0) is the initial value.r is the growth rate, as a decimal.As we saw above, the rate of change is a percent, and in this problem, only option A has a rate of change as a percent, hence it is an exponential function.
More can be learned about exponential functions at https://brainly.com/question/25537936
#SPJ1
6. Use a one unit multiplier to convert 20 inches to centimeters.
7. Use two unit multipliers to convert 25 feet to centimeters.
Answer:
should be 15.
Step-by-step explanation:
Plzz help me with this question
Answer:
4
Step-by-step explanation:
The degree is equal to the largest exponent on a variable. In this instance, it is 4.
Use the box plots comparing the number of males and number of females attending the latest superhero movie each day for a month to answer the questions.
Two box plots shown. The top one is labeled Males. Minimum at 0, Q1 at 1, median at 20, Q3 at 25, maximum at 50. The bottom box plot is labeled Females. Minimum at 0, Q1 at 5, median at 6, Q3 at 10, maximum at 18 and a point at 43
Part A: Estimate the IQR for the males' data. (2 points)
Part B: Estimate the difference between the median values of each data set. (2 points)
Part C: Describe the distribution of the data and if the mean or median would be a better measure of center for each. (4 points)
Part D: Provide a possible reason for the outlier in the data set. (2 points)
Answer:
The formula for iqr is q3 - q1
24
Step-by-step explanation:
The box plot is a visual way of presenting a dataset where the rectangle is used to represent the quartiles.
The IQR of the male dataset is 24.The difference in median of both datasets is 14.The best measure of center to use for the female box plot is the median. The best measure of center to use for the male box plot is the mean.A possible reason for an outlier is human error.The given parameters are:
Male: Female
[tex]Minimum = 0[/tex] [tex]Minimum = 0[/tex]
[tex]Q_1 = 1[/tex] [tex]Q_1 = 5[/tex]
[tex]Median = 20[/tex] [tex]Median = 6[/tex]
[tex]Q_3 = 25[/tex] [tex]Q_3 = 10[/tex]
[tex]Maximum = 50[/tex] [tex]Maximum = 18[/tex]
A. IQR for male dataset
The IQR is calculated as follows:
[tex]IQR = Q_3 - Q_1[/tex]
For the male's data:
[tex]IQR = 25-1[/tex]
[tex]IQR = 24[/tex]
Hence, the IQR of the male dataset is 24.
B. Difference in median values
We have:
[tex]Median = 20[/tex] ----- Male dataset
[tex]Median = 6[/tex] ----- Female dataset
So, the difference (d) is:
[tex]d = 20 - 6[/tex]
[tex]d = 14[/tex]
Hence, the difference in median of both dataset is 14.
C. Best measure of center
The female box plot (see attachment) has an outlier. This means that the measure of center to use for the female dataset is the median.
The male box plot has no outlier; this means that the mean can be used as a measure of center for the male box plot
D. Reason for outlier
There are several reasons that could cause an outlier in a dataset. One of the reasons is human error during data entry
Read more about box plots at:
https://brainly.com/question/1523909
We want to factor the following expression: (x 3)^2 14(x 3) 49(x 3) 2 14(x 3) 49(, x, plus, 3, ), squared, plus, 14, (, x, plus, 3, ), plus, 49 We can factor the expression as (U V)^2(U V) 2 (, U, plus, V, ), squared where UUU and VVV are either constant integers or single-variable expressions. 1) What are UUU and VVV
Answer:
[tex]U = x[/tex]
[tex]V=10[/tex]
Step-by-step explanation:
Given
[tex](x +3)^2 + 14(x + 3) + 49 = (U + V)^2[/tex]
Required
Find U and V
We have:
[tex](x +3)^2 + 14(x + 3) + 49 = (U + V)^2[/tex]
Expand
[tex]x^2 + 6x + 9 + 14x + 42 + 49 = (U + V)^2[/tex]
Collect like terms
[tex]x^2 + 6x + 14x + 9 + 42 + 49 = (U + V)^2[/tex]
[tex]x^2 + 20x + 100 = (U + V)^2[/tex]
Expand
[tex]x^2 + 10x + 10x + 100 = (U + V)^2[/tex]
Group
[tex][x^2 + 10x] + [10x + 100] = (U + V)^2[/tex]
Factorize each group
[tex]x[x + 10] + 10[x + 10] = (U + V)^2[/tex]
Factor out x + 10
[tex][x + 10][x + 10] = (U + V)^2[/tex]
So, we have:
[tex][x + 10]^2 = (U + V)^2[/tex]
By comparison
[tex]U = x[/tex]
[tex]V=10[/tex]
value of x in 2x-7=35 is
Answer:
x=21
Step-by-step explanation:
2x - 7 = 35
+7 +7
-----------------
2x = 42
----- -----
2 2
x = 21
The answer is 21, hope this helps.
Answer:
x = 21
Step-by-step explanation:
2x - 7 = 35
We need to isolate x. First, we add 7 to both sides.
2x - 7 + 7 = 35 + 7
2x = 42
Now we divide both sides by 2.
2x/2 = 42/2
x = 21
Answer: x = 21
I NEED HELP
THERE ARE TWO OTHER QUESTIONS AS WELL
Answer:
Please find attached the drawing of ABCD, A'B'C'D', and A''B''C''D'', created with MS Excel
Step-by-step explanation:
The given composition of transformation is [tex]r_{y-axis} \ \circ \ r_{x = - 4}[/tex]
The transformation on the right, [tex]r_{x = - 4}[/tex], is carried out first as follows;
The point A with coordinate (-7, 7) reflected across the line x = -4, gives;
A(-7, 7) [tex]r_{x = - 4}[/tex] → A'(-1, 7)
Similarly, we have;
B(-5, 7) [tex]r_{x = - 4}[/tex] → B'(-3, 7)
C(-5, 1) [tex]r_{x = - 4}[/tex] → C'(-3, 1)
D(-7, 1) [tex]r_{x = - 4}[/tex] → D'(-1, 1)
Therefore, the image of the given rectangle after reflection across the lie, x = -4, is A'(-1, 7), B'(-3, 7), C'(-3, 1), and D'(-1, 1)
The second transformation, [tex]r_{y-axis}[/tex], is found as follows;
(x, y) [tex]r_{y-axis}[/tex] → (x, -y)
Therefore, we have;
A'(-1, 7) [tex]r_{y-axis}[/tex] → A''(-1, -7)
B'(-3, 7) [tex]r_{y-axis}[/tex] → B''(-3, -7)
C'(-3, 1) [tex]r_{y-axis}[/tex] → C''(-3, -1)
D'(-1, 1) [tex]r_{y-axis}[/tex] → D''(-1, -1)
The points ABCD, A'B'C'D', and A''B''C''D'' are plotted on MS Excel and the points joined with straight lines to form the drawing of the triangles as shown in the attached figure.
can someone please help me out marking brainliest
Solve the triangle. Round to the nearest tenth when neccesary or to the nearest minute as appropriate.
Answer:
Here is the detailed answer below
Step-by-step explanation:
find the inequality represented by the graph
Answer:
First, find the function of the line:
slope = [tex]\frac{y_{2}-y_{1}}{x_{2}-x_{1}} =\frac{0-3}{0-4} =\frac{-3}{-4}=\frac{3}{4}[/tex]y-intercept = 0Therefore, the function is [tex]y=\frac{3}{4} x[/tex].
Since it's the area under the graph that's shaded(not ≥ or >) and the graphed line is dotted(not ≤ or ≥), then the inequality would be [tex]y<\frac{3}{4} x[/tex].
Square root of 64 + cube root of 64 is
Answer:
12
Step-by-step explanation:
[tex]\sqrt{64}[/tex] + [tex]\sqrt[3]{64}[/tex]
= 8 + 4
= 12
Square root of 64 = [tex] \sf \sqrt{64} = \sqrt{8 \times 8} = \boxed{\bf 8}[/tex]
Cube root of 64 = [tex] \sf \sqrt[3]{64} = \sqrt[3]{4 \times 4 \times 4} = \boxed{ \bf4}[/tex]
So,
Square root of 64 + Cube root of 64
[tex] = \sf \sqrt{64} + \sqrt[3]{64} \\ \sf = 8 + 4 \\ = \boxed{ \bf12}[/tex]
12 is the answer of the question asked.
____________
Hope it helps.
RainbowSalt2222
17’4” multiply by 17’5”
HELP PLEASE SO I CAN MOVE ON
find the measure of the indicated angle to the nearest degree
Answer:
16
Step-by-step explanation:
[tex] \tan(x) = \frac{13}{46} [/tex]
[tex] \tan {}^{ - 1} ( \frac{13}{46} ) = 16[/tex]
One person can do a certain job in 10 minutes and another person to the same job and 15 minutes how many minutes will it take to do the job together
Answer:
6 minutes
Step-by-step explanation:
The equation for time together is
1/a+1/b = 1/c where a and b are the times alone and c is the time together
1/10 + 1/15 = 1/c
Multiply by the least common denominator to clear the fraction
30c(1/10 + 1/15 = 1/c)
3c+ 2c = 30
5c = 30
Divide by 5
5c/5 = 30/5
c = 6
Answer:
6 minutes
Step-by-step explanation:
Person A does 1 job in 10 minutes.
In 1 minute, person A does 1/10 of the job.
Person B does the same job in 15 minutes.
In 1 minute, person B does 1/15 of the job.
Working together, in 1 minute the do
1/10 + 1/15 of the job.
Working together, they take t minutes to do the job.
In 1 minute, they do 1/t of the job.
1/10 + 1/15 = 1/t
3/30 + 2/30 = 1/t
5/30 = 1/t
1/6 = 1/t
t = 6
The eighth term of a linear sequence is 26. The term-to-term rule is 'add 3
Work out the fourth term of the sequence.
Explain the method you used to solve this problem.
Let a be first term
[tex]\\ \rm\longmapsto a_8=a+7d[/tex]
[tex]\\ \rm\longmapsto 26=a+7(3)[/tex]
[tex]\\ \rm\longmapsto a=26-21[/tex]
[tex]\\ \rm\longmapsto a=5[/tex]
Now
[tex]\\ \rm\longmapsto a_4=a+3d[/tex]
[tex]\\ \rm\longmapsto a_4=5+3(3)[/tex]
[tex]\\ \rm\longmapsto a_4=5+9[/tex]
[tex]\\ \rm\longmapsto a_4=14[/tex]
