Outside a spherically symmetric charge distribution of net charge Q, Gauss's law can be used to show that the electric field at a given distance:___________.
A) must be directed inward.
B) acts like it originated in a point charge Q at the center of the distribution.
C) must be directed outward.
D) must be greater than zero.
E) must be zero.

Answer:

3.55 T

Explanation:

Applying,

F = BILsin∅.............. Equation 1

Where F = Force, B = magnetic Field, I = current, L = Length of the wire, ∅ = Angle between the wire and the magnetic field

make B the subject of the equation

B = F/ILsin∅.................. Equation 2

From the question,

Given: F = 2.45 N, L = 3.00 cm = 0.03 m, I = 23.0 A, ∅ = 90° (Perpendicular)

Substitute these values into equation 2

B = 2.45/(0.03×23×sin90)

B = 2.45/0.69

B = 3.55 T

Answer:

Explanation:

The answer is C because the building is 80 meters high. Before the stone is dropped, it has ONLY potential energy since kinetic energy involves velocity and a still stone has no velocity. At impact, there is no potential energy because potential energy involves the height of the stone relative to the ground and a stone ON the ground has no height; here there is ONLY kinetic.

From the First Law of Thermodynamics, we know that energy cannot be created or destroyed, it can only change form. Therefore, that means that at the halfway point of 40 meters, half of the stone's potential energy has been lost, and it has been lost to kinetic energy. Here, at 40 meters, there is an equality between PE and KE. It only last for however long the stone is AT 40 meters, which is probably a millisecond of time, but that's where they are equal.

Answer:

The correct answer would be - Low pitch.

Explanation:

As it is known that if frequency increases then pitch will be increase as well as pitch depends on frequency, Now for the question it is mentioned that the tube closed on one end frequency is:

f = v/2l

Where,

l = length of the tube

v = velocity of longitudinal wave of gas filled in the tube

Now increase with the temperature the density of the gas decreases and velocity v is inversely proportional to density of gas so velocity increases. So if there is an increase in frequency so pitch also increases. As the temperature inside the house is at 750 F more than outsideat 450 Fso pitch is more inside and the pitch is low outside.

Answer:

a. solve for a

[tex]vf ^{2} = vo ^{2} + 2a(xf - xo) \\ 2a(xf - xo) = vf^{2} - vo ^{2} \\ a = \frac{vf^{2} - vo^{2} }{2(xf - xo)} \\ a = \frac{vf ^{2} - vo ^{2} }{2xf - 2xo} [/tex]

I hope I helped you ^_^

Answer:

It was an apparently temporary feature about the size of Earth, similar to the Great Red Spot of Jupiter, but disappeared within a few years.

Explanation:

The Great Dark Spot of Neptune was an immense spinning storm in the southern atmosphere of Neptune. The size of the entire Earth, it had the strongest winds ever recorded on any planet in the solar system. It was discovered by the Voyager 2 spacecraft in 1989, but by 1994 the Hubble Space Telescope saw it was gone.

The Great Red Spot is a storm found in Jupiter's southern hemisphere, with similar characteristics to the Great Dark Spot.

Answer:

The required fraction is 0.023.

Explanation:

Given that

Mass of a car, m = 1030 kg

Mass of 4 wheels = 12 kg

We need to find the fraction of the total kinetic energy of the car is due to rotation of the wheels about their axles.

The rotational kinetic energy due to four wheel is

[tex]=4\times \dfrac{1}{2}I\omega^2\\\\=4\times \dfrac{1}{2}\times \dfrac{1}{2}mR^2(\dfrac{v}{R})^2\\\\=mv^2[/tex]

Linear kinetic Energy of the car is:

[tex]=\dfrac{1}{2}mv^2\\\\=\dfrac{1}{2}\times Mv^2[/tex]

Fraction,

[tex]f=\dfrac{mv^2}{\dfrac{1}{2}Mv^2}\\\\f=\dfrac{m}{\dfrac{1}{2}M}\\\\f=\dfrac{12}{\dfrac{1}{2}\times 1030}\\\\=0.023[/tex]

So, the required fraction is 0.023.

Answer:no

Explanation:because 0.9*(30*60)=0.9*1800=1620

The turtle has already won the race

Yes rabbit will win the race will distance in 3.2 hours and turtle will cover in 27 hours

It is given

[tex]V_{t} = 0.9 \frac{m}{s}[/tex]

[tex]V_{r} = 9 \frac{m}{s}[/tex]

[tex]D=1500 m[/tex]

Time taken by turtle  

 [tex]T= \dfrac{D}{V_{t} }=\dfrac{1500}{0.9_{} }[/tex]

[tex]T=1666 minutes= 27 hours[/tex]

Time taken by  rabbit

[tex]T= \dfrac{D}{V_{r} }=\dfrac{1500}{9_{} }[/tex]

[tex]T=166 minutes[/tex]

since rabbit started 30 minutes after turtle then

[tex]T= 136+30=196 minutes[/tex]

[tex]T= 3.2 hours[/tex]

Hence Yes rabbit will win the race will distance in 3.2 hours and turtle will cover in 27 hours

To know more about average velocity follow

https://brainly.com/question/6504879

Answer:  

t = 1.27 x 10⁹ s  

Explanation:  

First, we will find the volume of the wire:

Volume = V = AL  

where,  

A = Cross-sectional area of wire = πr² = π(1 cm)² = π(0.01 m)² = 3.14 x 10⁻⁴ m²  

L = Length of wire = 150 km = 150000 m  

Therefore,    

V = 47.12 m³

Now, we will find the number of electrons in the wire:  

No. of electrons = n = (Electrons per unit Volume)(V)  

n = (8.43 x 10²⁸ electrons/m³)(47.12 m³)  

n = 3.97 x 10³⁰ electrons  

Now, we will use the formula of current to find out the time taken by each electron to cross the wire:

[tex]I =\frac{q}{t}[/tex]  

where,  

t = time = ?  

I = current = 500 A  

q = total charge = (n)(chareg on one electron)  

q = (3.97 x 10³⁰ electrons)(1.6 x 10⁻¹⁹ C/electron)  

q = 6.36 x 10¹¹ C  

[tex]500\ A = \frac{6.36\ x\ 10^{11}\ C}{t}\\\\t = \frac{6.36\ x\ 10^{11}\ C}{500\ A}[/tex]

Therefore,

t = 1.27 x 10⁹ s

Answer:

a) required area is 1.1318 m²

b) the maximum potential difference that can be applied across the compactor is 1931.1 V

Explanation:

Given the data in the question;

dielectric constant εr = 2.35

distance between plates ( thickness ) d = 0.0785 mm = 7.85 × 10⁻⁵ m

dielectric strength = 49.5 MV/m

a)

given that capacity capacitor C = 0.3 uF = 0.3 × 10⁻⁶ F

To find the Area, we use the following the expression.

C = ε₀εrA / d

we know that The permittivity of free space, ε₀ = 8.854 x 10⁻¹²  (F/m)

we substitute

0.3 × 10⁻⁶ = [ (8.854 x 10⁻¹²) × 2.35 × A  ] /  7.85 × 10⁻⁵

A = [ (0.3 × 10⁻⁶) × (7.85 × 10⁻⁵) ] / [ 2.35 × (8.854 x 10⁻¹²) ]

A = 2.355 × 10⁻¹¹ / 2.08069 × 10⁻¹¹

A = 1.1318 m²

Therefore, required area is 1.1318 m²

b)

the maximum potential difference that can be applied across the compactor.

We use the following expression;

⇒ 1/2 × dielectric strength × thickness d

we substitute

⇒ 1/2 × ( 49.5 × 10⁶ V/m ) × ( 7.85 × 10⁻⁵ m )

⇒ 1931.1 V

Therefore, the maximum potential difference that can be applied across the compactor is 1931.1 V

Answer:

100Hz

Explanation:

In a full wave rectifier, the fundamental frequency of the ripple is twice that of input frequency. Given the input frequency of 50 Hz, the fundamental frequency will be 2 × 50 = 100Hz

Answer:

HZ 100 is the right answer hope you like it

Answer:

7.28×10⁻⁵ T

Explanation:

Applying,

F = BILsin∅............. Equation 1

Where F = magnetic force, B = earth's magnetic field, I = current flowing through the wire, L = Length of the wire, ∅ = angle between the field and the wire.

make B the subject of the equation

B = F/ILsin∅.................. Equation 2

From the question,

Given: F = 0.16 N, I = 68 A, L = 34 m, ∅ = 72°

Substitute these values into equation 2

B = 0.16/(68×34×sin72°)

B = 0.16/(68×34×0.95)

B = 0.16/2196.4

B = 7.28×10⁻⁵ T

Answer:

When studying nanotechnology, scientists must be aware that their ideas may not work out. Their work could be very time consuming and cost a lot of money. Finally, scientists do not yet know all of the effects of nanotechnology on human health.

Hope it helps u:)

Answer:

  f = 276.6 Hz

Explanation:

This musical instrument can be approximated to a tube system where each tube has one end open and the other closed.

In the closed part there is a node and in the open part a belly or antinode. Therefore the wavelength is

          L = λ/ 4

speed is related to wavelength and frequency

          v = λ f

          λ = v / f

we substitute

          L = v / 4f

          f = v / 4L

the speed of sound at 20ºC is

          v = 343 m / s

let's calculate

          f = [tex]\frac{343 }{4 \ 0.31}[/tex]

          f = 276.6 Hz

Answer:

[tex]F_b= 0.720 N[/tex]

Explanation:

From the question we are told that:

Weight [tex]W=600N[/tex]

Average density [tex]\rho=1.20kg/m^3[/tex]

Mass

[tex]m=\frac{W}{g}[/tex]

[tex]m=\frac{600}{9.81}[/tex]

[tex]m=61.22kg[/tex]

Generally the equation for Volume is mathematically given by

[tex]V =\frac{ mass}{density}[/tex]

[tex]V= \frac{61.22}{1000}[/tex]

[tex]V=0.06122 m^3[/tex]

Therefore

Buoyant force [tex]F_b[/tex]

[tex]F_b=\rho*V*g[/tex]

[tex]F_b= rho_air*V*g[/tex]

[tex]F_b= 0.720 N[/tex]

Answer:

 I = - m 16  the two impulses are the same,

Explanation:

The impulse is given by the relationship

         I = Δp

         I = p_f - p₀

in this case the final velocity is zero therefore p_f = 0

        I = -p₀

For driver A the steering wheel impulse is

        I = - m v₀

        I = - m 16

For driver B, the airbag gives an impulse

        I = - m 16

We can see that the two impulses are the same, the difference is that in the air bag more time is used to give this impulse therefore the force on the driver is less

Answer:

solid cylinder

Explanation:

the object that arrives first is the object that has more speed, let's use the concepts of energy

starting point. Highest point

         Em₀ = U = m g h

final point. Lowest point

         Em_f = K = ½ mv² + ½ I w²

since the body has rotational and translational movement

how energy is conserved

         m g h = ½ mv² + ½ I w²

linear and angular velocity are related

          v = w r

          w = v / r

we substitute

          m g h = ½ mv² + ½ I (v/r) ²

          mg h = ½ v² (m + I /r²)

          v = [tex]\sqrt{2gh \ \frac{m}{m + \frac{I}{r^2} } }[/tex]

the tabulated moments of inertia for the bodies are

solid cylinder     I = ½ m r²

hollow cylinder  I = m r²

we look for the speed for each body

solid cylinder

          v₁ = [tex]\sqrt {2gh} \ \sqrt{\frac{m}{m + m/2} }[/tex]

          v₁ = [tex]\sqrt{2gh} \ \sqrt{2/3}[/tex]

let's call    v₀ = [tex]\sqrt{2gh}[/tex]

         v₁ = 0.816 v₀

hollow cylinder

          v₂ = [tex]\sqrt{2gh } \ \sqrt{\frac{m}{m+ m} }[/tex]

          v₂ = v₀ √½

          v₂ = 0.707 v₀

Therefore, the body that has the highest speed is the solid cylinder and since time is the inverse of speed, this is the body that spends less time to reach the bottom, that is, it is the first to arrive

Answer: [tex]283.2\times 10^{-9}\ nC[/tex]

Explanation:

Given

Cross-sectional area [tex]A=0.4\ cm^2[/tex]

Dielectric constant [tex]k=4[/tex]

Dielectric strength [tex]E=2\times 10^8\ V/m[/tex]

Distance between capacitors [tex]d=5\ mm[/tex]

Maximum charge that can be stored before dielectric breakdown is given by

[tex]\Rightarrow Q=CV\\\\\Rightarrow Q=\dfrac{k\epsilon_oA}{d}\cdot (Ed)\quad\quad [V=E\cdot d]\\\\\Rightarrow Q=k\epsilon_oAE\\\\\Rightarrow Q=4\times 8.85\times 10^{-12}\times 0.4\times 10^{-4}\times 2\times 10^8\\\\\Rightarrow Q=28.32\times 10^{-8}\\\\\Rightarrow Q=283.2\times 10^{-9}\ nC[/tex]

Answer:

The maximum charge is 7.08 x 10^-8 C.

Explanation:

Area, A = 0.4 cm^2

K = 4

Electric field, E = 2 x 10^8 V/m

separation, d = 5 mm = 0.005 m

Let the capacitance is C and the charge is q.

[tex]q = CV\\\\q=\frac{\varepsilon o A}{d}\times E d\\\\q = \varepsilon o A E\\\\q = 8.85\times 10^{-12}\times0.4\times 10^{-4}\times 2\times 10^8\\\\q = 7.08\times 10^{-8}C[/tex]

Answer:

(a) The spring constant is 59.23 N/m

(b) The total energy involved in the motion is 0.06 J

Explanation:

Given;

mass, m = 240 g = 0.24 kg

frequency, f = 2.5 Hz

amplitude of the oscillation, A = 4.5 cm = 0.045 m

The  angular speed is calculated as;

ω = 2πf

ω = 2 x π x 2.5

ω = 15.71 rad/s

(a) The spring constant is calculated as;

[tex]\omega = \sqrt{\frac{k}{m} } \\\\\omega ^2 = \frac{k}{m} \\\\k = m\omega ^2\\\\where;\\\\k \ is \ the \ spring \ constant\\\\k = (0.24) \times (15.71)^2\\\\k = 59.23 \ N/m[/tex]

(b) The total energy involved in the motion;

E = ¹/₂kA²

E = (0.5) x (59.23) x (0.045)²

E = 0.06 J

Answer:

Renewable energy is a type of energy that can be renewed easily, such as sunlight. By using Solar panels to collect the suns energy, we are not depleting it, so this source is renewable.

Non-renewable  energy is something that cannot easily be replenished. An example would be oil because oil takes millions of years to form and cannot be renewed easily.

1433 km

Explanation:

Let g' = the gravitational field strength at an altitude h

[tex]g' = G\dfrac{M_E}{(R_E + h)^2}[/tex]

We also know that g at the earth's surface is

[tex]g = G\dfrac{M_E}{R_E^2}[/tex]

Since g' = (2/3)g, we can write

[tex]G\dfrac{M_E}{(R_E + h)^2} = \dfrac{2}{3}\left(G\dfrac{M_E}{R_E^2} \right)[/tex]

Simplifying the above expression by cancelling out common factors, we get

[tex](R_E + h)^2 = \dfrac{3}{2} R_E^2[/tex]

Taking the square root of both sides, this becomes

[tex]R_E + h = \left(\!\sqrt{\dfrac{3}{2}}\right) R_E[/tex]

Solving for h, we get

[tex]h = \left(\!\sqrt{\dfrac{3}{2}} - 1\right) R_E= 0.225(6.371×10^2\:\text{km})[/tex]

[tex]\:\:\:\:\:= 1433\:\text{km}[/tex]

Answer:

Minimum Area of rectangle = 24 centimeter²

Explanation:

Given:

Length of rectangle = 6 centimeter

Width of rectangle = 4 centimeter

Find:

Minimum Area of rectangle

Computation:

Minimum Area of rectangle = Length of rectangle x Width of rectangle

Minimum Area of rectangle = 6 x 4

Minimum Area of rectangle = 24 centimeter²

Answer:

a) Light that passes through the floor to reveal yourself (not shadow).

b) 2 rays of light that bounce between 2 transparent media.

c) I don't know what is Diffraction?

Answer:

a) T = 0.5 s

b) v = 1.2π m/s ≈ 3.77 m/s

Explanation:

It makes two revolutions in one second so makes one revolution in ½ second

circumference of the circle is

C = 2πr = 0.6π m

which it traverses in one time period

0.6π m / 0.5 s = 1.2π m/s

To solve this, we must be knowing each and every concept related to speed and its calculations. Therefore, the angular speed of a model car moves round a circular path of radius 0.3m at 2 revolutions per secs is 3.77 m/.

Speed may be defined as the distance traveled by an item in the amount of time it requires to travel that distance. In other words, it measures how rapidly an item travels but does not provide direction.

Speed may be calculated in Science. The speed equation is a scientific formula that is used to calculate various types of speed.

Mathematically, the formula for speed can be given as

speed= distance/time

Values that are given

Time period= 0.5 s

Circumference = 2πr = 0.6π m

substituting all the given values in the above equation, we get

speed     =0.6π m / 0.5 s

On calculations, we get

              = 1.2π m/s

              =3.77 m/s

Therefore, the angular speed of a model car moves round a circular path of radius 0.3m at 2 revolutions per secs is 3.77 m/.

To learn more about speed, here:

https://brainly.com/question/13263542

#SPJ2

Answer:

An axis is an invisible line around which an object rotates, or spins. The points where an axis intersects with an object's surface are the object's North and South Poles.

Explanation:

The Earth's axis is represented by the red line. The white circle represents axial precission, the slow "wobble" of the axis.

Answer:

[tex]a=2.5\ m/s^2[/tex]

Explanation:

Given that,

Initial speed of the car, u = 14 m/s

Finally, it comes to rest, v = 0

Time, t = 5.6 s

We need to find the average acceleration of the car during this time interval. We know that,

[tex]a=\dfrac{v-u}{t}\\\\a=\dfrac{0-14}{5.6}\\\\a=-2.5\ m/s^2[/tex]

So, the acceleration of the car is [tex]2.5\ m/s^2[/tex] in the opposite direction of motion.

The least distance up to which we can see the objects clearly without any strain is called least distance of distinct vision. Least distance of distinct vision for a normal human being is 25cm. For young people, the least distance of distant vision will be within 25cm which however it varies with age.

Answer:

25 you said ? thats incorecct

Explanation:

Answer:

28 j

Explanation:

because when you add you get 28