On the sonometer shown below, a horizontal cord of length 5 m has a mass of 1.45 g. When the cord was plucked the wave produced had a frequency of 120 Hz and wavelength of 6 cm. (a) What was the tension in the cord? (b) How large a mass M must be hung from its end to give it this tension? ​

Answers

Answer 1

Answer:

(a) T = 0.015 N

(b) M = 1.53 x 10⁻³ kg = 1.53 g

Explanation:

(a) T = 0.015 N

First, we will find the speed of waves:

[tex]v =f\lambda[/tex]

where,

v = speed of wave = ?

f = frequency = 120 Hz

λ = wavelength = 6 cm = 0.06 m

Therefore,

v = (120 Hz)(0.06 m)

v = 7.2 m/s

Now, we will find the linear mass density of the coil:

[tex]\mu = \frac{m}{l}[/tex]

where,

μ = linear mass density = ?

m = mass = 1.45 g = 1.45 x 10⁻³ kg

l = length = 5 m

Thereforre,

[tex]\mu = \frac{1.45\ x\ 10^{-3}\ kg}{5\ m}\\\\\mu = 2.9\ x\ 10^{-4}\ kg/m[/tex]

Now, for the tension we use the formula:

[tex]v = \sqrt{\frac{T}{\mu}}\\\\7.2\ m/s = \sqrt{\frac{T}{2.9\ x\ 10^{-4}\ kg/m}}\\\\(51.84\ m^2/s^2)(2.9\ x\ 10^{-4}\ kg/m) = T[/tex]

T = 0.015 N

(b)

The mass to be hung is:

[tex]T = Mg\\\\M = \frac{T}{g}\\\\M = \frac{0.015\ N}{9.8\ m/s^2}\\\\[/tex]

M = 1.53 x 10⁻³ kg = 1.53 g


Related Questions

Can Some1 help??

When using the "ball and stick" drawing method of drawing a compound, which element usually goes in the center of the model?

Answers

What type of problem it is

Proper physical exercise makes bones _[blank 1]_.
People with stronger muscles and bones have better _[blank 2]_.

Which option shows the words that correctly fill in blank 1 and blank 2, in that order?


longer, flexibilitylonger, flexibility , ,

stronger, posturestronger, posture , ,

longer, posturelonger, posture , ,

stronger, flexibility

Answers

stronger, posturestronger, posture

hope that helped

What is a measure of how hard it is to stop a moving object?
25.
A. gravity
B. weight
C.
inertia
D. momentum

Answers

Answer:

C. inertia

Explanation:

inertia describes an object’s resistance to change in motion (or to get in motion due to a lack of motion), and momentum describes how much motion it has.

both are connected, as inertia depends on the object's momentum, but the answer here is inertia.

Suppose your actual height is 5 feet and 5.2 inches. A tape measure which can be read tothe nearest 1/8 of an inch gives your height as 65 3/8 inches. The laser device at the clinic that givesreadings to the nearest hundredth of an inch says you are 65.31 inches.

Required:
a. Which measuring device is more accurate?
b. Which measuring device is more precise?

Answers

Answer:

a) The laser device

b) The tape

Explanation:

First, there is a need to understand what accuracy and precision mean.

Accuracy is the closeness of a measurement to its true (pre-determined) value.

Precision is the closeness of repeated measurements to each other.

Since 1 feet = 12 inches, then, 5 feet and 5.2 inches would be equivalent to 65.2 inches. This value represents the true value of my height.

The tape measured the height as 65 3/8, which is equivalent to 65.375 inches.

The laser device measured the height as 65.31.

Error = true value - measured value

Absolute error from the tape = 65.2 - 65.375

                                       = -0.175 inches

Absolute error from laser device = 65.2 - 65.31

                                 = -0.11

a) The magnitude of error from the tape is more than that of the laser device. Hence, the laser device is said to be more accurate.

b) Even though there were just single readings from both instruments, the tape can be read to the nearest 1/8 of an inch and as such, can give more precisive measurements than the laser device.

The US currently produces about 27 GW of electrical power from solar installations. Natural gas, coal, and oil powered installations produce about 740 GW of electrical power. The average intensity of electromagnetic radiation from the sun on the surface of the earth is 1000 W/m2 . If solar panels are 30% efficient at converting this incident radiation into electrical power, what is the total surface area of solar panels responsible for the 27 GW of power currently produced

Answers

Answer:

The total surface area is "90 km²".

Explanation:

Given:

Power from solar installations,

= 27 GW

Other natural installations,

= 740 GW

Intensity,

[tex]\frac{F}{At}=\frac{P}{A}=1000 \ W/m^2[/tex]

%n,

= 30%

Now,

⇒ %n = [tex]\frac{out.}{Inp.}\times 100[/tex]

then,

⇒ [tex]Inp.=\frac{27}{30}\times 100[/tex]

           [tex]=90 \ GW[/tex]

As we know,

⇒ [tex]I=\frac{P}{A}[/tex]

by substituting the values, we get

[tex]1000=\frac{90\times 10^9}{A}[/tex]

    [tex]A = \frac{90\times 10^9}{10^3}[/tex]

        [tex]=90\times 10^6[/tex]

        [tex]=90 \ km^2[/tex]

Determine the acceleration of a pendulum bob as it passes through an angle of 15 degrees to the right of the equilibrium point.

Answers

Answer:

Explanation:

Since energy is conserved:

2

mu  

2

 

=  

2

mv  

2

 

+mgh

⇒u  

2

=v  

2

+2gh

⇒(3)  

2

=v  

2

+2(9.8)(0.5−0.5cos60)

⇒v=2m/s

Acceleration of the simple pendulum is 2.62 m/s².

What is meant by a simple pendulum ?

When a point mass is suspended from a fixed support by a light, non-extensible string, the instrument is said to be a simple pendulum.

Here,

Let the mass of the bob be m. The simple pendulum is attached to the fixed support with a string having length l. The pendulum makes an angle of 15° with the vertical from the equilibrium point.

Let T be the tension acting on the string.

As, the bob passes through the angle,

The weight of the bob becomes equal to the vertical component of the tension.

mg = T cos15°

Also, the horizontal component of the tension,

T sin15° = ma

By solving these two equations, we get that,

Acceleration of the simple pendulum,

a = g tan15°

a = 9.8 x 0.267

a = 2.62 m/s²

Hence,

Acceleration of the simple pendulum is 2.62 m/s².

To learn more about simple pendulum, click:

https://brainly.com/question/31816771

#SPJ3

Why we use semiconductor instead of metal in thermopile.

Answers

Answer:

Semiconductors are not normal materials. They have special properties which conductors/metals cannot exhibit. The main reason for the behavior of semiconductors is that they have paired charge carriers-the electron-hole pair. This is not available in metals.

OBJECTI
1. The motion of a liquid inside a U-tube is an
example of what type of motion?
a. Simple Harmonic c. Random
b.Rectilinear
d. Circular

Answers

Answer:

option A

Explanation:

simple harmonic motion

Answer:

random motion I think not sure

The first law of motion describes the principle of __________

Answers

Answer:

The first law of motion describes the principle of law of inertia.

Difference between scissors and nut cracker​

Answers

but cracked cracks nuts while scripts cut

What do you understand by moment of inertia and torque?
Word limit 50-60

Please don't copy from any sources. You can rewrite. Plagiarism will be check. Thank you.

Answers

Answer:

Moment of inertia, in physics, quantitative measure of the rotational inertia of a body—i.e., the opposition that the body exhibits to having its speed of rotation about an axis altered by the application of a torque (turning force). The axis may be internal or external and may or may not be fixed.

A load of 25 kg is applied to the lower end and of a steal wire of length 25 m and thickness 3.0mm .The other end of wire is suspeded from a rigid support calculate strain and stress produced in the wire​

Answers

Answer:

the weight of the wire + 25kg

Explanation:

two objects A and B vertically thrown up with velocities 80m/s and 100m/s at two sec interval.where and when will they meet each other?

Answers

Answer:

hcbvdgsyyvjusvbxjxu usbsbhsi

Explanation:

ysggsghxuxgscsixigdvgsibxhdhshshjf

Partial tides _______. Question 7 options: represent various components of local tides that are resolved mathematically are predicted individually are added together to predict the height and timing of astronomical tides All of the above are correct. Only a and c are correct.

Answers

Complete Question

Partial tides __________.

Question 7 options:  

a. represent various components of local tides that are resolved mathematically  

b. are added together to predict the height and timing of astronomical tides  

c. consist of 4 components due to the influence of celestial bodies  

d. consist of up to 60 components due to astronomical and non-astronomical factors  

e. All of the above except c are correct.

Answer:

Option E

Explanation:

Generally

Partial tides represent various components of local tides that are resolved mathematically

Partial tides  are added together to predict the height and timing of astronomical tides

Partial tides consist of up to 60 components due to astronomical and non-astronomical factors

But Partial tides do not consist of 4 components due to the influence of celestial bodies

Therefore

All of the above except c are correct.

Option E

An equation for the period of a planet is 4 pie² r³/Gm where T is in secs, r is in meters, G is in m³/kgs² m is in kg, show that the equation is dimensionally correct.​

Answers

Answer:

[tex]\displaystyle T = \sqrt{\frac{4\, \pi^{2} \, r^{3}}{G \cdot m}}[/tex].

The unit of both sides of this equation are [tex]\rm s[/tex].

Explanation:

The unit of the left-hand side is [tex]\rm s[/tex], same as the unit of [tex]T[/tex].

The following makes use of the fact that for any non-zero value [tex]x[/tex], the power [tex]x^{-1}[/tex] is equivalent to [tex]\displaystyle \frac{1}{x}[/tex].

On the right-hand side of this equation:

[tex]\pi[/tex] has no unit.The unit of [tex]r[/tex] is [tex]\rm m[/tex].The unit of [tex]G[/tex] is [tex]\displaystyle \rm \frac{m^{3}}{kg \cdot s^{2}}[/tex], which is equivalent to [tex]\rm m^{3} \cdot kg^{-1} \cdot s^{-2}[/tex].The unit of [tex]m[/tex] is [tex]\rm kg[/tex].

[tex]\begin{aligned}& \rm \sqrt{\frac{(m)^{3}}{(m^{3} \cdot kg^{-1} \cdot s^{-2}) \cdot (kg)}} \\ &= \rm \sqrt{\frac{m^{3}}{m^{3} \cdot s^{-2}}} = \sqrt{s^{2}} = s\end{aligned}[/tex].

Hence, the unit on the right-hand side of this equation is also [tex]\rm s[/tex].

1. A 2.7-kg copper block is given an initial speed of 4.0 m/s on a rough horizontal surface. Because of friction, the block finally comes to rest. (a) If the block absorbs 85% of its initial kinetic energy as internal energy, calculate its increase in temperature.

Answers

Answer:

ΔT = 0.017 °C

Explanation:

According to the given condition, the change in internal energy of the block must be equal to 85% of its kinetic energy:

Change in Internal Energy = (0.85)(Kinetic Energy)

[tex]mC\Delta T = (0.85)\frac{1}{2}mv^2\\\\C\Delta T = (0.425)v^2\\\\\Delta T = \frac{0.425v^2}{C}[/tex]

where,

ΔT = increase in temperature = ?

v = speed of block = 4 m/s

C = specific heat capacity of copper = 389 J/kg.°C

Therefore,

[tex]\Delta T = \frac{(0.425)(4\ m/s)^2}{389}\\\\[/tex]

ΔT = 0.017 °C

A man is pulling a 20 kg box with a rope that makes an angle of 60 with the horizontal.If he applies a force of 150 N and a frictional force of 15 N is present, calculate the acceleration of the box.​

Answers

F (horizontal) = (150 N) cos(60°) - 15 N = (20 kg) a

==>   a = ((150 N) cos(60°) - 15 N)/(20 kg) = 3 m/s²

To calculate the acceleration of the box, we need to consider the net force acting on it. So, the acceleration of the box is 3 m/s².

The net force is the vector sum of the applied force and the force of friction. First, let's find the horizontal and vertical components of the applied force:

Horizontal component of the applied force (F[tex]_{horizontal}[/tex]) = F[tex]_{applied}[/tex] × cos(θ)

F[tex]_{horizontal}[/tex] = 150 N × cos(60°)

F[tex]_{horizontal}[/tex] = 150 N × 0.5

F[tex]_{horizontal}[/tex] = 75 N

Vertical component of the applied force (F[tex]_{vertical}[/tex]) = F[tex]_{applied}[/tex] × sin(θ)

F[tex]_{vertical}[/tex] = 150 N × sin(60°)

F[tex]_{vertical}[/tex] = 150 N × (√3 / 2)

F[tex]_{vertical}[/tex] ≈ 129.9 N

Now, let's calculate the net force in the horizontal direction:

Net Force in the horizontal direction (F[tex]_{net horizontal}[/tex]) = F[tex]_{horizontal}[/tex] - F[tex]_{friction}[/tex]

F[tex]_{net horizontal}[/tex] = 75 N - 15 N

F[tex]_{net horizontal}[/tex] = 60 N

Now, we can calculate the acceleration (a) using Newton's second law of motion, F = ma:

F[tex]_{net horizontal}[/tex] = m × a

60 N = 20 kg × a

Now, solve for acceleration (a):

a = 60 N / 20 kg

a = 3 m/s²

So, the acceleration of the box is 3 m/s².

To know  more about acceleration

https://brainly.com/question/460763

#SPJ2

MULTIPLE CHOICE
What is the role of the Sun in a forest ecosystem?
What is the Role of the sun in a forest ecosystem?

Answers

Answer:

It is to produce sunlight in the forest plants

The kinetic energy of a particle of mass 500g is 4.8j. Determine the velocity of the particle

Answers

Answer:

4.38 m/s

Explanation:

The answer is 4.38 m/s

A 2kg ball is rolled along the floor for 0.8 m at a constant speed of 6 m/s. What is the work done by gravity?

A, 0
B, 16 J
C, 72 J
D, 450 J
E, 90 J

Answers

=F×s×cosa=2×g×0,8×cos90°= 0

The work done by gravity on a ball of 2 kg which is moving with a constant speed of 6 meter per second is zero. Thus, the correct option is A.

What is Work?

Work is the energy transfer to or from an object through the application of force along with the displacement. For a constant force aligned with the direction of motion, the work done is equal to the product of the force strength which is applied and the distance traveled by the object.

Work = Force × Displacement

Force = Mass × Acceleration

Acceleration of the ball is zero as it is moving with a constant speed. Therefore, the work done by the gravity is zero.

Therefore, the correct option is A.

Learn more about Work done here:

https://brainly.com/question/13662169

#SPJ2

Ashley, a psychology major, remarks that she has become interested in the study of intelligence. In other words, Ashley is interested in?

Answers

Group of answer choices.

a) the capacity to learn from experience, solve problems, and to adapt to new situations.

b) how behavior changes as a result of experience.

c) the factors directing behavior toward a goal.

d) the ability to generate novel

Answer:

a) the capacity to understand the world, think rationally, and use resources effectively.

Explanation:

Psychology can be defined as the scientific study of both the consciousness and unconsciousness of the human mind such as feelings, emotions and thoughts, so as to understand how it functions and affect human behaviors in contextual terms.

This ultimately implies that, psychology focuses on studying behaviors and the mind that controls it.

In this scenario, Ashley who is a psychology major, stated that she's interested in the study of intelligence.

Intelligence can be defined as a measure of the ability of an individual to think, learn, proffer solutions to day-to-day life problems and effectively make informed decisions.

In other words, Ashley is interested in the capacity of humans to understand the world, think rationally, and use resources effectively to produce goods and services that meet the unending requirements, needs or wants of the people (consumers or end users) living around the world.

the rate of cooling determines ....... and ......​

Answers

Answer:

freezing point and melting point

A block with a mass of 0.26 kg is attached to a horizontal spring. The block is pulled back from its equilibrium position until the spring exerts a force of 1.2 N on the block. When the block is released, it oscillates with a frequency of 1.4 Hz. How far was the block pulled back before being released?

Answers

Answer:

2

Explanation:

pulling force because of it force

Answer:

5.9 cm

Explanation:

f: frequency of oscillation

frequency of oscillationk: spring constant

frequency of oscillationk: spring constantm: the mass

[tex]f = \frac{1}{2\pi} \sqrt{ \frac{k}{m} } [/tex]

in this problem we know,

F= 1.4 Hz

m= 0.26 kg

By re-arranging the formula we get

[tex]k = {(2\pi \: f )}^{2} m = {(2\pi(1.4hz))}^{2} 0.26kg = 20.1 \frac{n}{m} [/tex]

The restoring force of the spring is:

F= kx

where

F= 1.2 N

k= 20.1 N/m

x: the displacement of the block

[tex]x = \frac{f}{k} = \frac{1.2 \: n}{20.1 \frac{n}{m} } = 0.059m \: = 5.9 \: cm[/tex]

What is the maximum speed at which a car can round a curve of 25-m radius on a level road if the coefficient of static friction between the tires and road is 0.80? ​

Answers

I assume the curve is flat and not banked. A car making a turn on the curve has 3 forces acting on it:

• its weight, mg, pulling it downward

• the normal force from contact with the road, n, pushing upward

• static friction, f = µn, directed toward the center of the curve (where µ is the coefficient of static friction)

By Newton's second law, the net forces on the car in either the vertical or horizontal directions are

F (vertical) = n - mg = 0

F (horizontal) = f = ma

where a is the car's centripetal acceleration, given by

a = v ²/r

and where v is the maximum speed you want to find and r = 25 m.

From the first equation, we have n = mg, and so f = µmg. Then in the second equation, we have

µmg = mv ²/r   ==>   v ² = µgr   ==>   v = √(µgr )

So the maximum speed at which the car can make the turn without sliding off the road is

v = √(0.80 (9.80 m/s²) (25 m)) = 14 m/s

4. A diver is 20 m underwater and they are startled by a shark. They are tempted to take a big breath of air, drop their gear, and swim to the surface while holding their breath. Explain why this is dangerous g

Answers

Answer:

Explanation:

The air enters their lungs at the same pressure as the water at that depth.

If they hold their breath as they rise to atmospheric pressure, the expanding volume of air (due to decreasing pressure) trapped in their lungs will hyperextend the alveoli in their lungs, likely tearing blood lines and risking death by drowning in their own blood.

A runner has a temperature of 40°c and is giving off heat at the rate of 50cal/s (a) What is the rate of heat loss in watts? (b) How long will it take for this person's temperature to return to 37°c if his mass is 90kg.

Answers

Answer:

(a)  209 Watt

(b) 4482.8 seconds

Explanation:

(a) P = 50×4.18

Where P = rate of heat loss in watt

    P = 209 Watt

Applying,

Q = cm(t₁-t₂)................ Equation 1

Where Q = amount of heat given off, c = specific heat capacity capacity of human, m = mass of the person, t₁ and t₂ = initial and final temperature.

From the question,

Given: m = 90 kg, t₁ = 40°C, t₂ = 37°C

Constant: c = 3470 J/kg.K

Substtut these values into equation 1

Q = 90×3470(40-37)

Q = 936900 J

But,

P = Q/t.............. Equation 2

Where t = time

t = Q/P............ Equation 3

Given: P = 209 Watt, Q = 936900

Substitute into equation 3

t = 936900/209

t = 4482.8 seconds

ASK YOUR TEACHER An oil slick on water is 99.8 nm thick and illuminated by white light incident perpendicular to its surface. What color does the oil appear (what is the most constructively reflected wavelength, in nanometers), given its index of refraction is 1.38

Answers

Answer:

There will be a phase change at the 1-1.38 interface and no phase change at the 1.38-1.33 interface.

At a thickness of lambda / 4       (y/4) one should get constructive interference for the reflected light.

y = 4 * 99.8 * 10E-9 m = 400 nm (about)  = 4 * 10E-7 m

The color of this light will be violet or blue

i don't understand this, can someone help please?? ​

Answers

Explanation:

N2 + H2 --> NH3

balance them:

N2 + 3 H2 --> 2 NH3

so if 6 moles of N2 react, 12 moles of NH3 will form.

(you have to look at the big number in front, in this case its N2 and 2 NH3, therefore the amount of N2 will produce double the amount of NH3 )

An ideal spring is hung vertically from the ceiling. When a 2.0-kg mass hangs at rest from it the spring is extended 6.0 cm from its relaxed length. A downward external force is now applied to the mass to extend the spring an additional 10 cm. While the spring is being extended by the force, the work done by the spring is:
a. -3.6 J
b. -3.3 F
c. -3.4 times 10^-5 J
d. 3.3 J
e. 3.6 J

Answers

Answer:

b) - 3.3 J

Explanation:

Given;

mass, m = 2 kg

initial extension of the spring, x = 6 cm = 0.06 m

The weight of the mass on the spring;

W = mg

where;

g is acceleration due to gravity = 9.81 m/s²

W = 2 x 9.81

W = 19.62 N

The spring constant is calculated as;

W = kx

k = W/x

k = 19.62 / 0.06

k = 327 N/m

The work done by the spring when it is extended to an additional 10 cm;

work done = force x distance

distance = extension, x =  10 cm = 0.1 m

The work done by the spring opposes the applied force by acting in opposite direction to the force.

W = - Fx

W = - (kx) x

W = - kx²

W = - (327) x (0.1)²

W = - 3.27 J

W ≅ - 3.3 J

Therefore, the work done by the spring by opposing the applied force is -3.3 J

Two forces are acting on a body. One acts east, the other at 35° north of east. If the
two forces are equal in magnitude of 50 N, find the resultant using the Law of Sines
and the Law of Cosines. Please answer with full solution. Thanks

Answers

A=B=50NAngle=theta=35°

We know

[tex]\boxed{\sf R=\sqrt{A^2+B^2+2ABcos\Theta}}[/tex]

[tex]\\ \sf\longmapsto R=\sqrt{50^2+50^2+2(50)(50)cos35}[/tex]

[tex]\\ \sf\longmapsto R=\sqrt{2500+2500+2(2500)\times (-0.9)}[/tex]

[tex]\\ \sf\longmapsto R=\sqrt{5000+5000(-0.9)}[/tex]

[tex]\\ \sf\longmapsto R=\sqrt{5000+(-4500)}[/tex]

[tex]\\ \sf\longmapsto R=\sqrt{5000-4500}[/tex]

[tex]\\ \sf\longmapsto R=\sqrt{-500}[/tex]

[tex]\\ \sf\longmapsto R=22.4i[/tex]

Resultant using the Law of Sines and the Law of Cosines will be R=95 N

What is force?

Force is an external agent applied on any object to displace it from its position. Force is a vector quantity, so with magnitude it also requires direction. Direction is necessary to examine the effect of the force and to find the equilibrium of the force.

The Magnitude of two forces =50 N

Angle between the forces = 35

By using the resultant formula

[tex]\rm R=\sqrt{A^2+B^2+2ABCos\theta}[/tex]

[tex]\rm R=\sqrt{50^2+50^2+2(50)(50)Cos35}[/tex]

[tex]\rm R=\sqrt{5000+5000(0.81)}[/tex]

[tex]\rm R=\sqrt{5000+4500}[/tex]

[tex]\rm R=95\ N[/tex]

Hence the Resultant using the Law of Sines and the Law of Cosines will be R=95 N

To know more about force follow

https://brainly.com/question/25239010

Other Questions
Un globo contiene 4 moles de un gas ideal con un volmen de 5,0 L. Si se agregan 8 moles adicionales del gas a presin y temperatura constantes, Cul ser el volumen final del globo? - Cul es la densidad (en g / L) de un gas con una masa molar de 60 g / mol a 0,75 atm y 27 C? Find the degree of each polynomial and indicate whether thepolynomial is a monomial, binomial, trinomial, or none of these. The law of conservation of energy states that energy cannot be created ordestroyed, only converted into other forms.True or false Find the radius of the circle containing 18 degree arc of a circle whose length is 15 Pi meters Ubers recruitment guidelines and highly performance-focused management were very coherent with its fast growth but not with a sustainable long term strategy. Ubers executive team lacked the awareness of the medium to long term effects of such a corporate culture: bad employer brand, loss of talents (employee burn out and harassment), lack of market-reflecting diversity, and no trust and collaboration. As we have seen, it worked for a while and allowed the fantastic growth that Uber showed, but now the internal workings start to show and are damaging the brand and its future. Drastic changes are necessary: a tough job for Frances Frei from Harvard Business School What does the underlined word or phrase mean in the following sentence?El juez se enoj con el prisionero.got madpardonedforgot aboutsaid goodbye to C/4+ 2=5 what its the value of c Please help me ASAP!! Please explain your answer A potato chip manufacturer produces bags of potato chips that are supposed to have a net weight of 326 grams. Because the chips vary in size, it is difficult to fill the bags to the exact weight desired. However, the bags pass inspection so long as the standard deviation of their weights is no more than 3 grams. A quality control inspector wished to test the claim that one batch of bags has a standard deviation of more than 3 grams, and thus does not pass inspection. If a sample of 21 bags of potato chips is taken and the standard deviation is found to be 4.1 grams, does this evidence, at the 0.025 level of significance, support the claim that the bags should fail inspection what member of state have to do A factory produces 1, 250, 000 toys each year. The number of toys is expected to increase by about 150% per year. Which model can be used to find the number of toys, N (in millions), being produced in t years? 2 1/4 + 3 5/8I know I am just trying to make sure so please tell me I will give brain thing an aluminum atom has an atomic number of 13 and a mass number of 27,how manya)protons b) electrons pls write the formula too do you have to pass the act to graduate high school or to get The Governor-General who was impeached (a) Lord Dalhousie (b) Lord Mountbatten (c) Warren Hastings (d) Lord Hastings Alyssa's grades are dropping, she has isolated herself in her room, and she doesn't have any interactions with others. Her only focus is playing on her phone. As punishment for the drop in her grades, she is grounded from her phone. Her parents have caught her trying to play on it at night, and she has even tried to go sneak into her parents room to obtain the phone. What type of addiction is Alyssa exhibiting Dr. Kali works with her clients to help them learn deep relaxation. Next she has them list their fears from least to most anxiety-provoking. Finally, Dr Kali slowly exposes her clients to each of their fears and assists them in gaining control of their anxiety. Her approach is best known as Group of answer choices kPLEASE SOMEONE SOLVE B) I ALREADY KNOW 1. A) Is 75.875m^2 AYUDAAAAA Un litro de leche de bfala equivale a 1.7 litros de leche de vaca. si tengo 27 litros de leche de bfalo, a cuantos litros de leche de vaca equivaldra? Does any one know where I can get A level geography notes online ? Thank you