The picture that correctly shows the path of the reflected light ray is: Picture A.
A ray diagram can be defined as the graphical representation of the possible paths that a light wave takes from one point (source) to another.
Basically, some of the phenomenon and properties associated with light ray include the following:
RefractionDiffractionInterferenceReflectionA reflected light ray completely bounces off a surface and as such, light wave do not pass through the surface as illustrated in Picture A.
Read more on reflected light here: https://brainly.com/question/14320820
the factor that governs the formula of an ionic compound such as ca3n2 is
Answer:
the charge or oxidation number on the cation and anion.
Explanation:
The factor that governs the formula of an ionic compound such as Ca3N2 is the charge or oxidation number on the cation and anion.
In the example, Ca has a +2 charge, N has a -3 charge
So we need 3 x ( +2) to balance 2 x (-3) and have an electrically neutral compound, so
+6 -6 =0
The factor that governs the formula of an ionic compound such as Ca₃N₂ is charge.
What are ionic compounds?Those compounds in which ionic bond is present between the cation and anion is known as ionic compound.
The most important factor that is essential for the formation of ionic compounds are charge i.e. positive charge and negative charge. In the given compound Ca₃N₂, Calcium (Ca) is present in the +2 oxidation state and Nitrogen is present in the -3 oxidation state. So due to attraction between these charges they make a ionic compound.
Hence charge is important factor.
To know more about ionic compounds, visit the below link:
https://brainly.com/question/11638999
275 KJ of energy was transferred to water at 15c. Calculate the mass of water that can be brought to its boiling point
Answer:
need points rn sorry bro hope u get ur answer
Explanation:
If i initially have a gas with a pressure of 84 kpa and a temperature of 350 c and i heat it an additional 230 degrees, what will the new pressure be? assume the volume of the container is constant.
Answer:
67.824
Explanation: You want to use the combined gas law equation (P1*V1)/(n1*T1)=(P2*V2)/(n2*T2). So first cross out what remains constant, so volume(V) and I assume moles (since it was not mentioned as a change). Then you can solve algebraically for the answer!
Hope this helped!
The new pressure will be 139.2 kpa .
What is the combined Gas Law?According to combined gas law,
[tex]\rm\dfrac{PV}{nT} = R[/tex]
In the Combined Gas Law,if we change either one of the variables the others will also change.
When the moles of the gas is constant , the above equation can be written as ,
[tex]\rm \dfrac{P'V'}{T'}= \dfrac{PV}{T}[/tex]
Given is P = 84kpa , T= 350⁰ C and T' = 350+230=580⁰ C , V=V' , P'=?
So we will substitute the values in the above formula keeping volume constant.
[tex]\rm \dfrac{P'}{T'}= \dfrac{P}{T}[/tex]
[tex]\rm\dfrac{P'}{580}= \dfrac{84}{350}[/tex]
[tex]\rm P' = \dfrac{84\times 580}{350}[/tex]
[tex]\rm P'= 139.2 \;kpa[/tex]
Therefore the new pressure will be 139.2 kpa .
To know more about Combined Gas Law:
https://brainly.com/question/13154969
#SPJ2
Which of these elements would have an electron affinity higher than that of oxygen?
Li
Ca
Ne
C
Be
Answer: Ne ( Neon )
Explanation: Lithium ( Li ), beryllium ( Be ), carbon ( C ), oxygen ( O ), and neon ( Ne ), are all in Period 2 in that order. Sodium ( Na ) is in Period 3. Since electron affinities decrease as you go down, Na would have a lower electron affinity level then Li but since electron affinities increase as you go across a period, only neon is farther right then oxygen ( O ), so it would be the only one element of this group that would have a higher electron affinity than that of oxygen.
There are various kind of elements that are present in periodic table. Some elements are harmful, some are radioactive, some are noble gases. Option C is correct option.
What is periodic table?Periodic table is a table in which we find elements with properties like metals, non metals, metalloids and radioactive element arranges in increasing atomic number.
Periodic table help a scientist to know what are the different types of elements are present in periodic table so that they can discover the new elements that are not being discovered yet.
On going down the group electronegativity decreases. On going along the period the electronegativity increases. So, Neon lies on the extreme right of Fluorine in the same period. Neon will have more electronegativity than oxygen.
Therefore, Neon is more electronegativity than fluorine.
Learn more about periodic table, here:
https://brainly.com/question/11155928
#SPJ2
Solid calcium hydroxide is dissolved in water until the pH of the solution is 11.44. The hydroxide ion concentration [OH–] of the solution is:______.A. 1.1 * 10-11 M.B. 3.06 M.C. 8.7 * 10-4 M.D. 1.0 * 10-14 M.E. None of these.
Answer:
c the answer is c that is the answer
Why are you more likely to become dehydrated in hot weather?
Answer:
sweat
Explanation:
you get dehydrated in hot weather because your body will release sweat to try and keep you cool
Answer:
Well, the heat can sometimes be very subtle in how it affects the body. If you're out in the sun, it can take just 30 minutes or up to a few hours for the heat to cause dehydration, nausea or it could cause trouble concentrating. When it's hot and humid, your risk of dehydration and heat illness increases. That's because when the air is humid, sweat can't evaporate and cool you as quickly as it normally does, and this can lead to an increased body temperature and the need for more fluids.
I HOPE DAT THIS HELPS :)
Explanation:
Which type of dry-chemical fixed application method introduces a concentration of agent into a closed area
Actuating mechanism is the dry-chemical fixed application method which
introduces a concentration of agent into a closed area.
The actuating mechanism is commonly used in piping systems and
involves the transport of a control member in automatic or remote control
systems.
The closed system makes manual navigation very difficult which is why the
actuating mechanism in automatic systems are usually used to make it less
tedious and accurate.
Read more on https://brainly.com/question/19914723
22) Calculate the energy of a photon of radiation with a frequency of 9.50 x 1013 Hz.
The energy of the photon with a frequency of 9.50×10¹³ Hz is 6.29×10¯²⁰ J
From the question given above, the following data were obtained:
Frequency (f) = 9.50×10¹³ Hz
Planck's constant (h) = 6.626×10¯³⁴ Js
Energy (E) =?The energy of the photon can be obtained as follow:
E = hf
E = 6.626×10¯³⁴ × 9.50×10¹³
E = 6.29×10¯²⁰ JTherefore, the energy of the photon is 6.29×10¯²⁰ J
Learn more: https://brainly.com/question/7957705
An unknown element sample has 2 isotopes present. The first isotope has a mass of 6.017 amu and is
7.30% abundant. The second has a mass of 7.018 amu and an abundance of 92.7%. Calculate the
average atomic mass of this element
Answer:
Calculating Atomic Mass
Change each percent abundance into decimal form by dividing by 100. Multiply this value by the atomic mass of that isotope. Add together for each isotope to get the average atomic mass.
Explanation:
have a nice day
what element is 1s2 2s2 2p3
which of the following molecules can form hydrogen bonds with others like it?
Answer:
nitrogen, oxygen and fluorine
Elements with ________________ first ionization energies and ___________ electron affinities generally form cations.
Answer:
elements with low first ionization energies and positive or slightly negative electron affinities generally form cations.
hope it is helpful:)
What is the molar mass of an unknown gas with a density of 3.35 g/L at 1.00 atm and 25.0 °C
Answer:
[tex]\implies \sf D = \dfrac{PM}{RT}[/tex]
[tex]\implies \sf 3.35= \dfrac{1 \times M}{ \frac{1}{12} \times 298}[/tex]
[tex]\implies \sf 3.35= \dfrac{12\times M}{ 298}[/tex]
[tex]\implies \sf 3.35 \times 298= 12\times M[/tex]
[tex]\implies \sf 998.3= 12\times M[/tex]
[tex]\implies \sf M = \dfrac{998.3}{12} [/tex]
[tex]\implies \bf M = 83.1917 \: \frac{g}{mol} [/tex]
How many cl- ions are there in 2. 50 kg of barium chooride.
Find the number of CO2 molecules present in 20l of CO2 at 0°C and 772mm of Hg.
I wiLL mark you as brainliest and give 50 points.
Answer:
18
At STP, 22.4 liters of a gas forms one mole that is 6.023×10
23
molecules.
Volume of CO
2
in 1 litre of air =
100
0.03
×1 L
∴ No. of molecules of CO
2
=
22.4
6.023×10
23
×
100
0.03
=8.066×10
18
Explanation:
I guess it's this
[tex]\\ \sf\longmapsto PV=nRT[/tex]
[tex]\\ \sf\longmapsto n=\dfrac{PV}{RT}[/tex]
[tex]\\ \sf\longmapsto n=\dfrac{772(20)}{8.314(273)}[/tex]
[tex]\\ \sf\longmapsto n=\dfrac{15440}{2269.722}[/tex]
[tex]\\ \sf\longmapsto n=6.8mol[/tex]
T or F: Lone pairs around the oxygen atom of a water molecule play no role in determining its molecular geometry?
Answer:
Explanation:
They play a very important part. The geometry is not a straight line. It is an angle over 90 which means that the molecule has the same general shape as a boomerang. The two hydrogens and the 2 lone electron pairs try to get away as far as possible from each other. The actual shape results in a tetrahedron shape. But the two hydrogens and 1 oxygen actually look like the aforementioned boomerang.
why does helium fusion require higher temperatures
Answer:
Nuclear fusion of hydrogen to form helium occurs naturally in the sun and other stars. It takes place only at extremely high temperatures. That's because a great deal of energy is needed to overcome the force of repulsion between the positively charged nuclei.
Explanation:
hope it helps
What mass of water absorbs 6700 J of heat to raise the temperature from 283K to 318K?
Answer:
you did not give the specific heat like formula like it takes 1kj to raise 28grams of water by 10 grams
Convert 1.56x10^30 particles of sodium chloride to grams of sodium chloride
Answer:
I cannot tell yet
Explanation:
I don't take that class yet but ill get back to you
How to find formula for ionic compounds.
Answer:
I am using an example for this in this table it works for any other compound as well.
asap help for brainlist
Which pair of atoms will form a covalent bond?
Question 7 options:
H and O
Li and I
K and Fl
Na and Cl
Answer:
h and o
Explanation:
because both are non metals
PLEASE HELP IM DESPERATE.
Assume you are performing the calibration step of Experiment 8 and you begin with 80 g of water at 20 oC and 80 g of water at 80 oC. After adding the two portions of water into your calorimeter setup and following the procedure outlined in the experiment, you determine the temperature of the mixed portions of water to be 45 oC. What is the heat capacity of the calorimeter?
Assume room temperature is 25 oC.
Answer:
Reaction time tests can be used to assess an individual's hand-eye coordination. One test involves catching a 1 metre ruler and measuring the distance, d in metres, that the ruler travelled before being caught. The reaction time t seconds is then calculated using the formula: = √2d/9.8
Why do metals form cations and nonmetals form anions?
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
Metals have tendency to loose electrons in order to get noble gas configuration, therefore they loose electrons to form Cations (positively charged ions)
for example ~ Sodium forms Na+
And
Non - metals have tendency to gain electrons in order to attain noble gas configuration , hence they gain electron from somewhere and bears a negative charge forming Anion.
for example ~ Chlorine forms Cl-
Add 2 teaspoons of baking soda and 2 teaspoons of citric acid to the foam cup. Add the half cup of water to the cup and stir. What is the temperature?
Answer:
Test for carbon dioxide gas.
The reaction between baking soda and citric acid will form sodium ions, citric acid ions, carbon dioxide gas, and water. So all you have to do is add the gas produced (by gas displacement method or something) and test whether the gas is carbon dioxide, with lime water or other methods like hydrogencarbonate indicator. Hope this helped!
Explanation:
Answer:
depends on amount, but the reaction's endothermic (meaning its cold, absorbs heat from surroundings)
I hope it helps.
what is air pressure? In your own words
Answer:
The amount of force applied on an object that is moving in motion
Explanation:
What is the unabbreviated electron configuration for Barium?
Answer:
[Xe] 6s2
Explanation:
hope it helps Electron configuration
a. What are the half-reactions for the redox reaction CuCl2 + Zn → ZnCl2 + Cu? Label the oxidation
reaction and the reduction reaction. (1 point)
PLS HELP 100 points
The oxidation half equation is Zn ------> Zn^2+ + 2e while the reduction half equation is Cu^2+ + 2e------> Cu.
A redox reaction is a reaction in which there is a loss/gain of electrons. The specie that gives out electrons experiences an increase in oxidation number while the specie that gains the electrons experiences a decrease in oxidation number.
For the reaction; CuCl2 + Zn → ZnCl2 + Cu
The oxidation half equation is;
Zn ------> Zn^2+ + 2e
The reduction half equation is;
Cu^2+ + 2e------> Cu
The chloride ion is excluded because its oxidation number does not change from left to right in the reaction.
Learn more: https://brainly.com/question/967776
What is the correct formula for tetraphosphorous octaoxide
P4O10
P4O8
Ph4O8
P5O8
P_4O_8
How?
Let's learn how to create name of compound from its name.
Look below for root words
2-di 3-tri4-tetra5-pent6-hex7-hept8-oct9-non10-decHence formula of the compound is P4O8
If you have a 100g of Boron and you want to find out how
many molecules of Boron you have, you would need to...
Answer:
5.57 x 10^24 atoms
Explanation:
first, you are seeking the number of ATOMS of Boron.
Boron has an Atomic mass of 10.8 g/mol (see #5 on the periodic table)
100 gm of Boron would have 100 g /10.8 g/mol =9.26 moles
each mole has Avogadros number of atoms 6.02 x 10^23
9.26 moles has 9.26 x 6.02 x 10^23 atoms =5.57 x 10^24 atoms
Water (H2O) is a liquid at room temperature, while carbon dioxide (CO2) is a gas at room temperature. Why? Choose the two statements that apply.
Water has relatively strong hydrogen bonds holding the molecules together but CO2 has only dispersion forces acting as intermolecular forces. The weaker intermolecular forces explains why CO2 is a gas whereas H2O is a liquid at room temperature