Nitrogen monoxide and water react to form ammonia and oxygen, like this: (g)(g)(g)(g) Write the pressure equilibrium constant expression for this reaction.

Answer:

0

Explanation:

answer from gauth math

Explanation:

here's the molecule you were looking for

Answer:

pH = 10.20

Explanation:

The HClO reacts with NaOH as follows:

HClO + NaOH → H2O + NaClO

Where HClO and NaOH react in a 1:1 reaction.

As the concentration of both reactions is the same and the reaction is 1:1, to reach equivalence point are required the same 25.0mL.

And the NaClO produced decreases its concentration in 2 because the volume is doubled.

The concentration of NaClO is: 0.150M / 2 = 0.075M

The equilibrium of NaClO is:

NaClO(aq) + H2O(l) ⇄ HClO(aq) + OH-(aq)

Where Kb of reaction is 1.0x10⁻¹⁴ / Ka =

1.0x10⁻¹⁴ / 3.0x10⁻⁸ = 3.33x10⁻⁷ = [HClO] [OH-] / [NaClO]

[NaClO] = 0.075M

As both HClO and OH- comes from the same equilibrium,

[HClO] = [OH-] = X

Where X is the reactoin coordinate

Replacing:

3.33x10⁻⁷ = [X] [X] / [0.075M]

2.5x10⁻⁸ = X²

X = 1.58x10⁻⁴M = [OH-]

pOH = -log [OH-]

pOH = 3.80

pH = 14 - pOH

Answer:

I think b acid makers

Explanation:

hope it will help you

В

an echo is caused by the fact that waves can be reflected by solid surfaces, this is due to the dynamic pattern of rarefactions and air seals near the reflecting surface

Answer:

b. contributes to binding of O2 by hemoglobin in lungs and release of O2 from hemoglobin in tissues.

Explanation:

Answer:

1.28 M

Explanation:

Step 1: Given data

Mass of luminol (solute): 17.0 g

Volume of water: 75.0 mL (this is also the volume of solution)

Step 2: Calculate the moles corresponding to 17.0 g of luminol

The molar mass of luminol is 177.16 g/mol.

17.0 g × 1 mol/177.16 g = 0.0960 mol

Step 3: Calculate the molarity of the solution

We will use the definition of molarity

M = moles of solute / liters of solution

M = 0.0960 mol / 0.0750 L = 1.28 M

Answer:

K+ClKCl

Explanation:

because the reaction is between metal Potassium and Non-metal Chlorine

Answer:

Explanation:

a) It is a redox reaction because KCl is an ionic compounds with K having a + charge and Cl having a - charge. Originally, both have an oxidation state of 0 and not K has 1+ and Cl has 1-. Therefore, one species was oxidized and one was reduced which is indicative of a redox reactions.

b)

2K + Cl2 => 2KCl

Answer:

I think C (synthesis of biological compounds

Explanation:

have a nice day

Answer:

19.2 g

Explanation:

Step 1: Write the balanced equation

P₂O₅(s) + 3 H₂O(l) ⇒ 2 H₃PO₄

Step 2: Calculate the moles corresponding to 5.29 g of H₂O

The molar mass of H₂O is 18.02 g/mol.

5.29 g × 1 mol/18.02 g = 0.294 mol

Step 3: Calculate the theoretical yield of phosphoric acid, in moles

The molar ratio of H₂O to H₃PO₄ is 3:2. The theoretical yield of H₃PO₄ is 2/3 × 0.294 mol = 0.196 mol

Step 4: Calculate the mass corresponding to 0.196 moles of H₃PO₄

The molar mass of H₃PO₄ is 97.99 g/mol.

0.196 mol × 97.99 g/mol = 19.2 g

Answer:

Explanation:

Answer:

CO =Coordinate Covalent Bond ,H2O = Water , NE= Nickel or Neon ,KCL=Potassium Chloride and O2 = Water

Explanation:

hope you wiill get help from me please follow me

Answer:

Ksp = [ Cu+² ] [ OH-] ²

molar mass Cu(oH )2 ==> M= 63.546 (1) + 16 (2) + 1 (2) = 97.546 g/mol

Ksp = [ Cu+² ] [ OH-] ²

Ksp [ cu (OH)2 ] = 2.2 × 10-²⁰

|__________|___Cu+² __|_2OH-____|

|Initial concentration(M)|___0__|_0______|

|Change in concentration(M)|_+S |__+2S__|

|Equilibrium concentration(M)|_S _|2S___|

Ksp = [ Cu+² ] [ OH-] ²

2.2 ×10-²⁰ = (S)(2S)²= 4S³

[tex]s = \sqrt[3]{ \frac{2.2 \times {10}^{ - 20} }{4} } = 1.8 \times {10}^{ - 7} [/tex]

S = 1.8 × 10-⁷ M

The molar solubility of Cu(OH)2 is 1.8 × 10-⁷ M

Solubility of Cu (OH)2 =

[tex]Cu (OH)2 = \frac{1.8 \times {10}^{ - 7} mol \:Cu (OH)2 }{1L} \times \frac{97.546 \: g \: Cu (OH)2}{1 \: mol \: Cu (OH)2} \\ = 1.75428 \times 10 ^{ - 5} [/tex]

I hope I helped you^_^

Answer:

1:Part A.

[tex]\bold{42.2 g C_{12}H_{22}O_{11} \:in \:528 g H₂O}[/tex]

Mass Percent=[tex]\bold{\frac{Mass\: of \:Solute}{Mass\: of \:Solution}×100\%}[/tex]

=[tex]\frac{42.2}{528}*100\%=\bold{\underline{7.99\: or \:8\%}}[/tex]

Part B.

[tex]\bold{198\:m g\: C_{6}H_{12}O_{6} \:in\:4.71 g\: H₂O}[/tex]

mass of solute: 198mg

mass of solvent :4.71g=4710g

Mass Percent=[tex]\bold{\frac{Mass\: of \:Solute}{Mass\: of \:Solution}×100\%}[/tex]

=[tex]\frac{198}{4710}*100\%=\bold{\underline{4.20\%}} [/tex]

Part C.

[tex]\bold{8.85 g NaCl \:in \:190 g\: H₂O}[/tex]

Mass Percent=[tex]\bold{\frac{Mass\: of \:Solute}{Mass\: of \:Solution}×100\%}[/tex]

=[tex]\frac{8.85}{190}*100\%=\bold{\underline{4.66\%}}[/tex]

Answer:

It will help you !!!!!!!!!!

Answer:

False

Explanation:

Answer:

False

Explanation:

Answer:

C: The clothing company used technological design to create a product that helped aid researchers conducting a scientific investigation.

Explanation:

I just did the assignment on EDGE2020 and it's 200% correct!  

Also, heart and rate if you found this answer helpful!! :) (P.S It makes me feel good to know I helped someone today!!)  :)  

The question is incomplete, the complete question is shown in the image attached to this answer

Answer:

2,3,3-trimethylhexane

Explanation:

IUPAC nomenclature provides a universally acceptable method of naming organic compounds from its structure.

According to this system of nomenclature;

A comma is used to separate two numbers.

A hyphen is used to separate a number from a letter.

Applying these rules, the name of the compound shown in the question should be written as 2,3,3-trimethylhexane.

Answer:

[tex]\boxed {\boxed {\sf 0.757 \ atm}}[/tex]

Explanation:

We are asked to find the pressure of a gas given a change in volume. Since the temperature remains constant, we are only concerned with volume and pressure. We will use Boyle's Law, which states the volume is inversely proportional to the pressure. The formula for this law is:

[tex]P_1V_1= P_2V_2[/tex]

Initially, the oxygen gas occupies a volume of 18.7 liters at a pressure of 1.19 atmospheres.

[tex]1.19 \ atm * 18.7 \ L = P_2V_2[/tex]

The gas expands to a volume of 29.4 liters, but the pressure is unknown.

[tex]1.19 \ atm * 18.7 \ L = P_2 * 29.4 \ L[/tex]

We are solving for the new pressure, so we must isolate the variable [tex]P_2[/tex]. It is being multiplied by 29.4 liters. The inverse operation of multiplication is division. Divide both sides of the equation by 29.4 L.

[tex]\frac {1.19 \ atm * 18.7 \ L}{29.4 \ L} =\frac{ P_2 * 29.4 \ L}{29.4 \ L}[/tex]

[tex]\frac {1.19 \ atm * 18.7 \ L}{29.4 \ L} =P_2[/tex]

The units of liters cancel.

[tex]\frac {1.19 \ atm * 18.7 }{29.4 } =P_2[/tex]

[tex]\frac {22.253}{29.4 } \ atm = P_2[/tex]

[tex]0.7569047619 \ atm =P_2[/tex]

The original measurements all have 3 significant figures, so our answer must have the same. For the number we calculated, that is the thousandth place. The 9 in the ten-thousandth place to the right of this place tells us to round the 6 up to a 7.

[tex]0.757 \ atm \approx P_2[/tex]

The pressure of the gas sample is approximately 0.757 atmospheres.

According to Boyle's law, for a given mass of ideal gas, pressure of gas is inversely proportional to the volume of gas, Provided the Temprature remains constant.

[tex]\implies \sf P_1 V_1 = P_2 V_2 \\ [/tex]

[tex]\implies \sf 1.19 \times 18. 7= P_2 \times 29.4 \\[/tex]

[tex]\implies \sf 22.253= P_2 \times 29.4 \\[/tex]

[tex]\implies \sf P_2 = \dfrac{22.253}{29.4} \\[/tex]

[tex]\implies \underline{ \red{\boxed{ \bf P_2 \approx0.756 \: atm }}} \\[/tex]

Answer:

2Ag(s) + 2H²S(g) + O2(g) ➡️ Ag2S(s) + 2H2O(g)

Explanation:

Sorry for my typo. but you understand

Answer:

» Water evaporating to gas.

» Solid subliming to gas.

» Water freezing to solid.

» Solid melting to liquid.

Explanation:

[tex]{ \underline{ \blue{ \sf{christ \:† \: alone }}}}[/tex]

Given concentration of NaCl=15%

Means ,

In every 100g of Solution 15g of NaCl is present .

Now

So ,

[tex]\\ \Large\sf\longmapsto 250\times 15\%[/tex]

[tex]\\ \Large\sf\longmapsto 250\times \dfrac{15}{100}[/tex]

[tex]\\ \Large\sf\longmapsto 37.5g[/tex]

37.5g of NaCl present in 250g of solution.

Answer:

Given concentration of NaCl=15%

Means ,

In every 100g of Solution 15g of NaCl is present .

Now

Given mass=250g

So ,

➡250 × 15%

➡250×15/100

➡37.5g

37.5g of NaCl present in 250g of solution.

Answer:

the object will regain its original form as soon as the deforming force is removed. ... Flexibility means the object is just easily deformed, and will stay that way.

Explanation:

Answer

Accordingly the order of electronegativity of the given elements would be: Fluorine > Chlorine > Bromine > Iodine. ( Fluorine has the highest electronegativity.)

Answer:

One compound, called n-butane, where the prefix n- represents normal, has its four carbon atoms bonded in a continuous chain. The other, called isobutane, has a branched chain. Different compounds that have the same molecular formula are called isomers.

Answer:

d. constitutional isomers​

Explanation:

i hope it will help

Explanation:

noble gases are useful let's take for instance helium which is used in balloons. they are used to form inert atmosphere and they are used also to deter chemical reaction.

Answer:

True

Explanation:

Aromatic compounds undergo substitution rather than addition reactions because the aromatic structure is maintained.

Electrophilic aromatic substitution begins with attack of the electrophile on the aromatic ring to yield a delocalized intermediate called the arenium intermediate. Loss of hydrogen from this intermediate yields the final product.

We want to find the value of t such that the velocity vector makes an angle of 45° with both axes.

We found that:

t = (2/3)*(b/c)

The velocity vector makes an angle of 45° with the x and y axes.

We know that the position vector is:

r = r=b*t²i + c*t³j

Remember that the versor "i" corresponds to the x-component, and the versor "j" corresponds to the y-component, then:

r = r=b*t²i + c*t³j  = (b*t², c*t³)

The velocity vector is the vector that we get when we differentiate the position one, remember that if:

f(x) = a*x^n

then

f'(x) = n*a*x^(n - 1)

Using this, we can find that the velocity vector is:

v = (2*b*t,  3*c*t²)

Now we want to know, when does the velocity vector make an angle of 45° with the x and y axes.

Let's think of the vector as the hypotenuse of a triangle rectangle, where the x-component is the adjacent cathetus, and the y-component is the opposite cathetus. (so the angle is measured counterclockwise from the x-axis)

We have the trigonometric equation:

tan(a) = (opposite cathetus)/(adjacent cathetus)

So now we can replace these things with the known ones:

a = 45°

opposite cathetus = y-component = 3*c*t²

adjacent cathetus = x-component = 2*b*t

So we will get:

tan(45°)  =  (3*c*t²)/( 2*b*t)

1 = (3/2)*(c/b)*t

Now we can solve this for the variable, t.

1*(2/3)*(b/c) = t

t = (2/3)*(b/c)

We can conclude that at the time:

t = (2/3)*(b/c)

The velocity vector makes an angle of 45° with the x and y axes.

You can read more about vectors in:

https://brainly.com/question/10841907