Nitrogen dioxide, a major air pollutant, can be produced by the combustion of nitrogen oxide as shown. 2NO + O2 Right arrow. 2NO2 In a plant, 1,500 kg of nitrogen oxide is consumed per day to produce 1,500 kg of nitrogen dioxide per day. What is the percent yield? Use Percent yield equals StartFraction actual yield over theoretical yield EndFraction times 100.. 21.7% 32.6% 43.5% 65.2% Mark this and return Save and Exit Next Submit

Answer: Because when you blow air /gas into a balloon you fill it with air particles ,so they more you blow u blow in more air particles so they tend to collide with each other ,so as they hit the walls of the balloons pressure is exerted ,so the pressure keeps the balloon inflated with its shape

Explanation:

i) Melting point = 15°C and Boiling point = 110°C

ii) The region C on graph there is only liquid state, the region A on graph there is only solid state.

iii) The straight line A1 - B1 shows that the melting point of solid wax and getting converted to liquid form.

iv) Latent heat of vaporization is a physical property of a substance.

It is defined as the heat required to change one mole of liquid at its boiling point under standard atmospheric pressure. 

v) At 'B' the wax is at both solid and liquid state

Answer:

Polar molecules occur when there is an electronegativity difference between the bonded atoms. Nonpolar molecules occur when electrons are shared equal between atoms of a diatomic molecule or when polar bonds in a larger molecule cancel each other out

Explanation:

Answer:  b) a chemical reaction between carbohydrates and oxygen to produce carbon dioxide, water, and heat energy

Explanation:

Based on the options, I assume that this is talking about the process of respiration. Respiration allows living things to produce energy by reacting carbohydrates with oxygen.

This results in the release of energy in the form of heat in a cell and also the formation of carbon dioxide and water. This type of respiration is known as Aerobic respiration.

Answer:

18.5g Na2CO3

Explanation:

Chromium (III) chloride, CrCl3, reacts with Na2CO3 as follows:

2CrCl3 + 3Na2CO3 → Cr2(CO3)3(s) + 6NaCl

Where 2 moles of CrCl3 react with 3 moles of Na2CO3 to produce 1 mole of Cr2(CO3)3 -The precipitate-

To solve this question we need to find the moles of CrCl3 added. With the chemical equation we can find the moles of Na2CO3 and its mass as follows:

Moles CrCl3:

520mL = 0.520L * (0.224mol/L) = 0.116 moles CrCl3

Moles Na2CO3:

0.116 moles CrCl3 * (3 mol Na2CO3 / 2mol CrCl3) = 0.175 moles Na2CO3

Mass Na2CO3 -Molar mass: 105.99g/mol-

0.175 moles Na2CO3 * (105.99g/mol) = 18.5g Na2CO3

Answer:

The conditions for the formation of an electrovalent bond are as follows: The atom which changes into cation (+ ive ion) should possess 1,2 or 3 valency electrons. It will loose these electrons to form cation with +1,+2 or +3 charge

Answer: 4.93

Explanation:

here's your answer hope this will help

Answer: 143.48 moles of copper will be produced.

Explanation:

We are given:

Number of particles of copper (I) sulfate = [tex]4.32\times 10^{25}[/tex]

According to the mole concept:

[tex]6.022\times 10^{23}[/tex] number of particles is contained in 1 mole of a compound

So, [tex]4.32\times 10^{25}[/tex] number of particles will be contained in = [tex]\frac{1}{6.022\times 10^{23}}\times 4.32\times 10^{25}=71.74mol[/tex] of copper (I) sulfate

The given chemical equation follows:

[tex]Fe+Cu_2SO_4\rightarrow FeSO_4+2Cu[/tex]

By the stoichiometry of the reaction:

If 1 mole of copper (I) sulfate produces 2 moles of Cu

So, 71.74 moles of copper (I) sulfate will produce = [tex]\frac{2}{1}\times 71.74=143.48mol[/tex] of Cu

Hence, 143.48 moles of copper will be produced.

Answer:

false, The nucleus of atoms still move around like crazy, it's just the electrons move more.

[tex]\huge\boxed{\fcolorbox{red}{blue}{ QUESTION }}[/tex]

The maximum number of electrons that can be present in an shell is

[tex] \orange{\underline{\huge{\bold{\textit{\green{\bf{OPTIONS}}}}}}} [/tex]

a) [tex]2 {n}^{2} [/tex]

b) [tex]2 {n}^{2} + 1[/tex]

c) 2n

d) none of these.

[tex] \huge\mathbb{\red A \pink{N}\purple{S} \blue{W} \orange{ER}}[/tex]

OPTION (a)

[tex]2 {n}^{2} [/tex]

[tex] \bold { \red{ \star{ \blue{EXAMPLES}}}}[/tex]

In First shell only 2 electron can be placed .

[tex]2 {n}^{2} \\ n = 1 \: (bez \: \: no \: \: shell \: = 1) \\ so \\ 2 { n}^{2} = 2 \times {1}^{2} = 2 \: electrons[/tex]

In second shell 8 electrons can be placed

[tex]2 {n}^{2} \\ n = 1(bez \: \: no\: \: shell \: = 2) \\ 2 {n}^{2} = 2 \times {2}^{2} = 2 \times 4 = 8 \: electrons[/tex]

Answer:

E....H+

Explanation:

coz when hydrogen ions are formed they automatically join to form hydrogen

Answer:

A standard system of measurement is very important because it helps us from making mistakes at the moment of doing calculations and correctly working...

Answer:

A standard measurement system is important because it allows scientists to compare data and communicate with each other about their results. Metric System – is a measurement system based on the number 10.

Answer:

B

Explanation:

because B has a lower bp it needs less time and energy to turn into vapour and is collected into the condenser first

Answer:

Right

Explanation:

The reaction of bicarbonate ion with acid is shown in the following equation;

HCO3- + H3O --> H2CO3 + H2O

This reaction is endothermic. This implies that energy must be absorbed from the surrounding as the reaction progresses.

Hence, when the solution is boiled, energy is supplied to the system in the form of heat and the forward reaction is favoured hence the equilibrium shifts to the right.

Answer:

Cr(NO3)3 (aq) +K3PO4 (s)

Explanation:

Answer:

cfvgbhnjmk,

Explanation:

Answer:

Explanation:

hope it helps

Answer:

a. po tamang sagot

Explanation:

pa pafoolow po pleasr

The DNA and RNA are polynucleotides which contain a chain of nucleotides monomers with different nitrogenous bases. Each  nucleotide different from the others, as  It has different bases. The correct option is A.

A nucleotide is defined as a compound containing three component units, namely a pentose sugar (either ribose or 2-deoxyribose), a heterocyclic nitrogenous base (a substituted purine or a substituted pyrimidine) and a phosphate group.

The nucleotides are the phosphate esters of nucleosides. A nucleotide containing ribose as the sugar unit is termed as the ribonucleotide. While one containing 2-deoxyribose as the sugar unit is termed as the deoxyribonucleotide.

The nitrogenous bases in RNA are adenine, guanine, cytosine and uracil whereas in DNA the bases are adenine, guanine, cytosine and thymine. The purines are adenine and guanine whereas cytosine, thymine and uracil are pyrimidines.

Thus the correct option is A.

To know more about nucleotide, visit;

https://brainly.com/question/28178584

#SPJ7

Answer:

A. The red side is acidic.

B. Because it has more positive hydrogen ions.

C. The blue side is basic.

D. Because it has more negative hydroxide ion.

Given the data from the question,

A. The side with more H⁺ is acidic

B. It is acidic because it contains more H⁺

C. The side with more OH¯ is basic

B. It is basic because it contains more OH¯

This is simply a measure of the acidity / alkalinity of a solution.

The pH measures the hydrogen ion concentration while the pOH measures the hydroxide ion concentration

The pH scale is a scale that gives an understanding of the variation of the acidity / alkalinity of a solution.

The scale ranges from 0 to 14 indicating:

The presence of H⁺ indicates acidity.

Thus, the side with more H⁺ is acidic.

The presence of OH¯ indicates the solution is basic.

Therefore, the side with more OH¯ is basic

Learn more about pH:

https://brainly.com/question/3709867

Answer: The mass of ammonia is 124457.96 g which can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm.

Explanation:

Given: Volume = 450 L

Temperature = 450 K

Pressure = 300 atm

The reaction equation is as follows.

[tex]N_{2} + 3H_{2} \rightarrow 2NH_{3}[/tex]

Here, 1 mole of nitrogen reacts to give 2 moles of ammonia.

From the given data, moles of nitrogen are calculated as follows.

PV = nRT

where,

P = pressure

V = volume

n = no. of moles

R = gas constant = 0.0821 L atm/mol K

T = temperature

Substitute the values into the above formula as follows.

[tex]PV = nRT\\300 atm \times 450 L = n \times 0.0821 L atm/mol K \times 450 K\\n = \frac{300 atm \times 450 L}{0.0821 L atm/mol K \times 450 K}\\= \frac{135000}{36.945}\\= 3654.08 mol[/tex]

For 3654.08 moles of nitrogen, the moles of ammonia produced is as follows.

[tex]2 \times 3654.08 mol\\= 7308.16 mol[/tex]

Therefore, mass of ammonia (molar mass = 17.03 g/mol) is calculated as follows.

[tex]Moles = \frac{mass}{molarmass}\\7308.16 mol = \frac{mass}{17.03 g/mol}\\mass = 124457.96 g[/tex]

Thus, we can conclude that the mass of ammonia is 124457.96 g which can be produced from reacting a 450 L sample of nitrogen gas at a temperature of 450 K and a pressure of 300 atm.

Answer:

C. x⁴ + 6·x³ - 12·x  - 72

Explanation:

The given functions are;

[tex]f(x) =\sqrt{x^2 + 12 \cdot x + 36}[/tex]

g(x) = x³ -12

We have that [tex]f(x) =\sqrt{x^2 + 12 \cdot x + 36}[/tex] = [tex]f(x) =\sqrt{(x + 6)^2}[/tex] =  (x + 6)

Therefore;

f(x)·g(x) = [tex]\sqrt{x^2 + 12 \cdot x + 36}[/tex] × (x³ - 12) = (x + 6) × (x³ - 12)

(x + 6) × (x³ - 12) = x⁴ - 12·x + 6·x³ - 72 = x⁴ + 6·x³ - 12·x  - 72

∴ f(x)·g(x) = [tex]\sqrt{x^2 + 12 \cdot x + 36}[/tex] × (x³ - 12) = x⁴ + 6·x³ - 12·x  - 72

Answer:

A. 2 chlorine (Cl) atoms

Explanation:

2 chlorine atoms means that chlorine is a gas.

Sodium (Na) reacts with 2 chlorine atoms according to the equation below;

Na(s) + Cl2(g) => NaCl2

Answer:

fluorine is what its looking for

Explanation:

Answer:

The theoretical yield of carbon dioxide formed is 68.4 grams CO2

Explanation:

Step 1: Data given

Liquid octane = C8H18

gaseous oxygen gas = O2

gaseous carbon dioxide = CO2

gaseous water = H2O

Mass of octane = 27.4 grams

Molar mass of octane = 114.23 g/mol

Mass of oxygen = 77.8 grams

Molar mass of oxygen = 32.0 g/mol

Step 2: The reaction

2C8H18(l) + 25O2(g) → 16CO2(g) + 18H2O(g)

Step 3: Calculate number of moles

Moles = mass / molar mass

Moles of octane = 27.4 grams / 114.23 g/mol

Moles of octane = 0.240 moles

Moles of oxygen = 77.8 grams / 32.0 g/mol

Moles of oxygen = 2.43 moles

Step 4: Calculate the moles of the products

For 2 moles of octane we need 25 moles of O2 to produce 16 moles of CO2 and 18 moles H2O

O2 is the limiting reactant. It will completely react. (2.43 moles).

There will react 2.43/12.5 = 0.194 moles

There will remain 0.240 - 0.194 =  0.046 moles of octane.

There will be produced:

16/25 * 2.43 = 1.555 moles of CO2

18/25 * 2.43 = 1.750 moles of H2O

This is:

1.56 moles * 44.01 g/mol = 68.4 grams CO2

1.750 moles * 18.02 g/mol = 31.5 grams H2O

The theoretical yield of carbon dioxide formed is 68.4 grams CO2

Answer:

The balanced equation would be:

3AgNO3+Al→3Ag+Al(NO3)3

Explanation:

Explanation:We have momemtum = mass X velocity

    p = mv

    OR, p/m = v

    v = (125kg m/s)25kg

    v = 125/25 m/s

       v = 5 m/s

0Answer: 0.6094

Explanation:

no of moles = mass / molar mass = 100/164.088= 0.6094 mole

Answer:

0.609 moles

Explanation:

mass in g ÷ atomic mass = moles

Ca(NO₃)₂ = 1 Ca 40.078 amu

2 N 28.0134 amu

+ 6 O 95.994 amu

____________________

164.0854 amu

100 g ÷ 164.0854 amu = 0.609 moles

three significant digits

Answer:

element.... ....

.....