Newsweek performed a poll in which 500 American parents were asked the question, “Would you prefer to have your child taught by a male or female for grades K-2?” Only 40% responded that they would prefer to have their child taught by a male in grades K-2. Construct a 95% confidence interval for the poll.

Answer: 3

Step-by-step explanation: schoology whack

Answer: 3 of the squares should go down then 8 to the right.

Step-by-step explanation:

it just wants you to say how it was translated so take the corresponding points like p and p’ then count of many tiles it move to the right and then down to get from p to p’ you’ll see that it’s 8 right and 3 down.

hope this helps!

The terminal point on the unit circle use exact values are,

( x , y ) = ( [tex]\sqrt{\frac{3}{2} }[/tex] , - [tex]\frac{1}{2}[/tex] )

Decimals are the numbers, which consist of two parts namely, a whole number part and a fractional part separated by a decimal point. For example, 12.5 is a decimal number.

According to the question, it is provided that,

θ =  11π/6 radians

Now,

x = 1.cos(11π/6)

x = cos(11π/6)

x = cos(330°)

x = [tex]\sqrt{\frac{3}{2} }[/tex]

y = 1.sin(11π/6)

y = sin(11π/6)

y = -0.5

y = - [tex]\frac{1}{2}[/tex]

Then,

( x , y ) = ( [tex]\sqrt{\frac{3}{2} }[/tex] , - [tex]\frac{1}{2}[/tex] )

These two represents the terminal points

To find the terminal positions, we merely used the aforementioned equations, equated these two equations, and concluded that the same should be taken into consideration.

It could be figure out by using the x and y points

Therefore

The terminal point on the unit circle use exact values are,

( x , y ) = ( [tex]\sqrt{\frac{3}{2} }[/tex] , - [tex]\frac{1}{2}[/tex] )

To learn more about Terminal point visit :

brainly.com/question/4737736

#SPJ4

The required answer for the given system of linear equations is No solution.

What is a system of linear equation?

A system of linear equations comprises two or more linear equations made up of two or more variables so that all equations in the system are considered simultaneously. In this case, linear equations are first-order equations, where the maximum power of the variable is 1. One, two, or three variables may be present in a linear equation. As a result, we are able to formulate linear equations with n variables.

Solve for the first variable in one of the equations, then substitute the result into the other equation, we will get

No solution

The graph of the given system of linear equations is given below

Hence, the required answer for the given system of linear equations is No solution.

To learn more about a system of linear equations

https://brainly.com/question/26150814

#SPJ1

For statement 'A chi-square test of independence is used when both variables are ___.'

b. ordinal

d. nominal

In this question we have been given a statement 'A chi-square test of independence is used when both variables are ___.'

We need to select the correct choices for the given statement.

We know that the Chi-Square Test of Independence is used to test if two categorical variables are associated.

It is a nonparametric test.

It can only compare categorical variables.

The categorical variables are classified as nominal and ordinal variables.

Chi-Square Test is used to test for a statistically significant relationship between nominal and ordinal variables.

Therefore, for a chi-square test of independence is used when both variables ordinal  and nominal.

Learn more about chi-square test here:

https://brainly.com/question/14082240

#SPJ4

Answer:

  (c)  -42

Step-by-step explanation:

You want the product ab given that ...

The function (f+g)(x) is the sum of the other two functions. For the purpose here, we only need to look at terms that involve 'a' and 'b'.

Comparing coefficients of x², we have ...

  ax² +3x² = 9x²

  a = 9 -3 = 6

Comparing coefficients of x, we have ...

  -5x +bx = -12x

  b = -12 +5 = -7

The product is ...

  ab = (6)(-7) = -42

The functions that have a vertex at x = 0 are (a) f(x) = |x| and (d) f(x) = |x| - 6

From the question, we have the following parameters that can be used in our computation:

The absolute functions in the options

As a general rule;

A absolute functions can be represented as

f(x) = a|x - h| + k

Where

Vertex = (h, k)

A vertex that has x value of 0 means

(h, k) = (0, k)

So, we have

f(x) = a|x - 0| + k

Evaluate

f(x) = a|x| + k

Looking at the options, we have

f(x) = |x| and f(x) = |x| - 6

Read more about absolute functions at

https://brainly.com/question/10538556

#SPJ1

If in an analysis of variance problem involving 3 treatments and 10 observations per treatment, S S E = 399.6. The M S E for this situation is  C. 14.8.

We would be making use of this formula to find or determine the MSE which is the variance within the sample.

MSE = S S E / r (c-1)

Where:

MSE represent variance within the sample = ?

SSE represent sum of the squares of error = 399.6

r represent 3 treatment

c represent observation per treatment = 10

Let plug in the formula so as to know the variance within the sample (MSE )

Sample variance ( MSE ) = 399.6 /3 (10 - 1 )

Sample variance ( MSE ) = 399.6 / 3 (9)

Sample variance ( MSE ) = 399.6 / 27

Sample variance ( MSE ) = 14.8

Therefore  we can conclude that the correct option is C which is 14.8.

Learn more about variance within the sample here:https://brainly.com/question/28542390

#SPJ1

Total four triangles of B fit into triangle A as length of the equilateral triangle A is twice the length of triangle B.

As given in the question,

Types of triangles : Equilateral triangle

Number of triangle = 2

Triangle A and Triangle B

Let 'x' be the length of the triangle A

And 'y' be the length of the triangle B

As per given condition:

x = 2y

Area of equilateral triangle A = (√3/4)x²

Area of equilateral triangle B = (√3/4)y²

Now x = 2y

⇒Area of equilateral triangle A = (√3/4)(2y)²

⇒Area of equilateral triangle A = (√3/4)4y²

⇒Area of equilateral triangle A = 4 [(√3/4)y²]

⇒Area of equilateral triangle A = 4 ( area of equilateral triangle B)

Therefore, total number of four equilateral triangle of B fit into equilateral triangle A.

Learn more about equilateral triangle here

brainly.com/question/3461022

#SPJ4

Answer:

Step-by-step explanation:

because there is no change in slope. The graph will always be strait in this

Regression analysis will indicate about the underlying population and the model.

It is one of the most used and most powerful multivariate statistical techniques for it infers the existence and form of a functional relationship in a population. Once you learn how to use regression, you will be able to estimate the parameters { the slope and intercept } of the function that links two or more variables. With that estimated function, we  will be able to infer or forecast things like unit costs, interest rates, or sales over a wide range of conditions.

Though the simplest regression techniques seem limited in their applications, statisticians have developed a number of variations on regression that greatly expand the usefulness of the technique. And again, the t-distribution and F-distribution will be used to test hypotheses.

To learn more about Regression analysis

https://brainly.com/question/3297603

#SPJ4

The factor that produces the corresponding dimensions of cylinder B is: 3/2.

Similar solids have the same shape but different sizes, and which means the ratio of their corresponding linear measurements are the same.

To find the scale factor of similar solids, you can use the formula:

scale factor = (size of the similar solid) / (size of the original solid)

For example, if you have two similar solids, one with a volume of 64 cubic units and the other with a volume of 16 cubic units, the scale factor would be:

scale factor = (16 cubic units) / (64 cubic units) = 1/4

This means that the smaller solid is 1/4 the size of the larger solid.

Given the following:

Circumference of the base of cylinder A = 4π units [the radius = 2 units]

Area of the base of cylinder B = 9π units² [the radius = 3 units]

Scale factor = radius of the base of cylinder B / radius of the base of cylinder A

Scale factor = 3/2

Learn more about similar solids on:

https://brainly.com/question/16599646

#SPJ1

Complete Question:

Cylinders A and B are similar solids. The base of cylinder A has a circumference of 4π units. The base of cylinder B has an area of 9π units. The dimensions of cylinder A are multiplied by what factor to produce the corresponding dimensions of cylinder B?

The equation of the parabola is f(x)= 7x²+5x-2 when values of the x are -3,0,2 and the f(x) are -8,-2,-28.

Given that,

The values of the x are -3,0,2 and the f(x) are -8,-2,-28

We have to find the equation of the parabola with the x and f(x) values.

We know that,

The equation of the parabola of the form f(x) = ax²+bx+c

So,

-3a-3b+c=-8 ----->equation(1)

c=-2

2a+2b+c=-28 ------>equation(2)

Substituting c=-2 in equation(1) and equation(2)

-3a-3b-1+8=0

-3a-3b+7=0 ------>equation(3)

2a+2b-2+28=0

2a+2b+26=0 ------>equation(4)

Subtracting 2×equation(3) and 3×equation(4)

                               b=5

Substituting in equation(1)

a=7

Therefore, The equation of the parabola is f(x)= 7x²+5x-2 when values of the x are -3,0,2 and the f(x) are -8,-2,-28.

To learn more about equation visit: https://brainly.com/question/21511618

#SPJ1

Answer i just need points

Step-by-step explanation: maybe 90

find the area of the rectangle;

w x l = 8 x 10 = 80ft^2

circle;

pi(r)^2

r = 4

pi(4)^2

pi(16) = 50.24

80 + 50.24 = 130.24

The freezing point of the 2.75 m solution of octane in benzene is -8.56 °C.

The freezing point of a solution is the temperature at which the solution becomes a solid. The freezing point of a solution is lower than the freezing point of the pure solvent because the solute particles interfere with the movement of the solvent molecules, which slows down the freezing process.

To determine the freezing point of a solution, we can use the freezing point depression equation:

ΔTf = Kf x molality

where ΔTf is the change in freezing point, Kf is the freezing point depression constant for the solvent, and molality is the concentration of the solute in the solution expressed in moles of solute per kilogram of solvent.

To find the freezing point of a 2.75 m solution of C8H18 (octane) in benzene, we need to know the freezing point depression constant for benzene, which is 5.12 °C/m. We can then use the equation above to calculate the change in freezing point:

ΔTf = 5.12 °C/m x 2.75 m = 14.06 °C

To find the freezing point of the solution, we need to subtract the change in freezing point from the freezing point of the pure solvent. The freezing point of pure benzene is 5.5 °C, so the freezing point of the 2.75 m solution of octane in benzene is:

5.5 °C - 14.06 °C = -8.56 °C

This means that the freezing point of the 2.75 m solution of octane in benzene is -8.56 °C. At this temperature, the solution will become a solid.

Answer:

1280 cm³

I presume you are looking for the solution steps and these are below

Step-by-step explanation:

If the each side of the square pyramid is 16 and the slant height is 17, then the height of the pyramid, half the side and the slant edge form a right triangle.

The height of the pyramid can be computed using the Pythagorean theorem

Let a be each side, h the height and s the slant height

[tex]s^2 = h^2 + (a/2)^2\\\\\\s^2 = h^2 + \dfrac{a^2}{4}\\\\\textrm{Plugging in known values,}\\17^2 = h^2 + \dfrac{16^2}{4}\\\\289= h^2 + 64\\\\h^2 = 289 - 64\\\\h^2 = 225\\\\h = \sqrt{225} = 15\\\\[/tex]

The volume, V of a square pyramid of side a and height h is given by the formula:

[tex]V = \dfrac{1}{3}a^2h\\\\\\\textrm{Plugging in values,}\\\\V = \dfrac{1}{3}\cdot 16^2 \cdot 15\\\\[/tex]

[tex]V = \dfrac{1}{3} \cdot 256 \cdot 15\\\\V = 256 \cdot 5\\\\V = 1280[/tex]

The volume of the pyramid is 1280 cubic cm.

Given the slant height of the pyramid is 17 cm and the length of square base of the pyramid is 16 cm.

Now we know the volume of the pyramid with a square base = [tex]\frac{1}{3}[/tex]×area of the base×height.

So we need the values for area of the base and height of the pyramid.

Area of the square base=16×16 sq. cm.= 256 sq. cm.

Again we can apply the relation to find the value of height,

(Slant height)² = (Height)² + ([tex]\frac{1}{2}[/tex]×Length of the base)²

So, putting the values we get,

[tex](17)^2 = (height)^2 +(\frac{16}{2})^2[/tex]

⇒ [tex]289 = (height)^2+64[/tex]

⇒ [tex](height)^2= 225[/tex]

⇒ [tex]height = 15cm[/tex]

Now by appyling the volume of the pyramid we get,

Volume = [tex]\frac{1}{3} \times 256 \times 15[/tex] cubic cm. = 1280 cubic cm.

To learn more about Volume of pyramid,

https://brainly.com/question/22875296

https://brainly.com/question/27195620

The data item that corresponds to the z-score of 2.5 is 450.

What is Standard deviation?

The standard deviation is a statistic that expresses how much variance or dispersion there is in a group of numbers. While a high standard deviation suggests that the values are dispersed over a wider range, a low standard deviation suggests that the values tend to be close to the mean (also known as the anticipated value) of the collection.

A random variable, sample, statistical population, data set, or probability distribution's standard deviation is equal to the square root of its variance. Although less robust in practice, it is algebraically easier than the average absolute deviation. The fact that the standard deviation is expressed in the same unit as the data, as opposed to the variance, makes it a valuable statistic.

As, x = z×s + u, where z=2.5, s=60, u=300

⇒ x = 2.5×60 + 300

⇒ x = 150 + 300

⇒ x = 450

The data item that corresponds to the given z-score is 450.

To know more about standard deviation visit:

brainly.com/question/23907081

#SPJ1

Answer: It's B

Step-by-step explanation:

It shows that Angle B is congruent to angle g but it actually isnt

Answer:

B.  ∠b ≅ ∠g

Step-by-step explanation:

Supplementary angles

Two angles whose measures sum to 180°.

Linear Pair

Two adjacent angles that sum to 180° (two angles which when combined together form a straight line).

Same-side Interior Angles Theorem

When two parallel lines are intersected by a transversal, the angles that are interior to the parallel lines and on the same side of the transversal line are supplementary (sum to 180°).

Vertical Angles Theorem

When two straight lines intersect, the opposite vertical angles are congruent.

------------------------------------------------------------------------------------------

Statement A

∠f and ∠h are vertical angles.  Therefore, according to the Vertical Angle Theorem, ∠f ≅ ∠h.

Statement C

As ∠d and ∠h are the interior angles on the same side of the transversal [tex]\ell[/tex], according to the Same-side Interior Angles Theorem, ∠d and ∠h are supplementary.

Statement D

∠a and ∠b are a linear pair, therefore ∠a and ∠b are supplementary.

Therefore, Statement B cannot be supported by the evidence shown.

The inverse of the equation is y = (5/x) + 1

From the question, we have the following parameters that can be used in our computation:

y = 5/(x - 1)

Start by swaping the positions of x an dy

So, we have the following representation

x = 5/(y - 1)

So, we have

x(y - 1) = 5

Divide both sides by x

y - 1 = 5/x

Add 1 to both sides

y = (5/x) + 1

Hence, the inverse is y = (5/x) + 1

Read more about inverse equation at

https://brainly.com/question/3831584

#SPJ1

Answer:

what we cookin ma boi

Step-by-step explanation:

Answer:

C

Step-by-step explanation:

Answer:

B: It translates the graph 9 units to the right.

Step-by-step explanation:

The value 9 has the effect of translating the graph of function f(x) = |x| 9 units to the right. This is because the transformation g(x) = |x - 9| is obtained from f(x) = |x| by subtracting 9 from the argument of the absolute value function. This has the effect of shifting the graph of f(x) to the right by 9 units.

Therefore, the correct answer is B: It translates the graph 9 units to the right.

start by plugging values for x into the function

a) f(1) = 4 (1/2)^1

f(1) = 2

the first coordinate point is (1,2)

b) f(0) = 4(1/2)^0

f(0) = 4

(0,4)

this method will help you find the coordinate points and where to plot.

A. Width = 16.5 ft             B.Width = 55.25 ft  

   Height  = 9.3 ft                 Height = 91 ft

   Area = 153.45 ft²              Area = 5027.75 ft²  

The area of the rectangle is a place covered by a rectangle in a 2D plane

The formula for Area of the rectangle is given by

Here we have

1 in = 3 feet and  1 cm = 6.5 ft  

Calculation for rectangle A :

In rectangle A

Width  = 5.5 in

=> Width in feet = 5.5 × 3 feet = 16.5 ft

Height =  3.1 in

=> Height in feet = 3.1 × 3 feet = 9.3 ft

By the given formula

Area = 16.5 ft × 9.3 ft = 153.45 ft²    

Calculation for rectangle B :

In rectangle B

Width  = 8.5 cm

=> Width in feet = 8.5 × 6.5 feet = 55.25 ft

Height = 14 cm

=> Height in feet = 14 × 6.5 feet = 91 feet

By the given formula

Area = 55.25 ft × 91 ft =  5027.75 ft²    

Therefore,

 A. Width = 16.5 ft             B. Width = 55.25 ft  

       Height  = 9.3 ft                 Height = 91 ft

       Area = 153.45 ft²              Area = 5027.75 ft²  

Learn more about Area of rectangles at

https://brainly.com/question/16309520

#SPJ1

By observing the figure we can make the pairs as

∠1 ≅ ∠3 ---------(Opposite angles)
∠2 ≅ ∠4 ---------(Opposite angles)
∠5 ≅ ∠7 ---------(Opposite angles)
∠6 ≅ ∠8 ---------(Opposite angles)
∠4 ≅ ∠6 ---------(Alternate angles)
∠3 ≅ ∠5 ---------(Alternate angles)

What are opposite angles and Alternate angles?

Opposite angles are angles that are located opposite each other, with respect to a straight line or a transversal. They are also called vertically opposite angles.

Alternate angles are angles that are located on opposite sides of the transversal and on the same side of the straight line or the transversal. They are also called corresponding angles.

In the given figure,

By observing the opposite angles and alternate angles we can fill the blocks,

∠1 ≅ ∠3 ---------(Opposite angles)

∠2 ≅ ∠4 ---------(Opposite angles)
∠5 ≅ ∠7 ---------(Opposite angles)
∠6 ≅ ∠8 ---------(Opposite angles)

∠4 ≅ ∠6 ---------(Alternate angles)

∠3 ≅ ∠5 ---------(Alternate angles)

Hence, we have found the opposite angles and alternate angles from the figure.

To learn more about opposite angles and alternate angles, visit:

https://brainly.com/question/26167358

#SPJ1

As per the cylindrical coordinate, the value of E is (0, 2π/5)

In math, coordinates refers the set of values that show an exact position.

Here we have given that  x² + y² = 9, above the plane z = 0, and below the cone z² = 36x² + 36y²

And we need to find the value of E.

While we looking into the given question, we have identified that in cylindrical coordinates the region E is described by

=> 0 ≤ r ≤ 1, 0 ≤ θ ≤ 2π, and 0 ≤ z ≤ 2r.

Here the given equation will go through the double integral, then we get,

=> ∫∫∫ₓ x² dV

And it can be rewritten based on the differentiation,

=> ∫₂⁰ ∫¹₀ ∫²₀ (r cos θ)² r dz dr dθ

=>  ∫₂⁰ cos² θ dθ

=> ∫¹₀ 2r⁴ dr = 2π/5

To know more about coordinates here.

https://brainly.com/question/27749090

#SPJ4

The dimensions of the rectangle with area 35 m² is

length = 7.6 m and width = 4.6 m

The dimension of the rectangle is calculated using the formula for area of rectangle

= length x width

where

area of rectangle

35 = (w + 3) * w

35 = w² + 3w

w² + 3w - 35 = 0

solving for w gives

w = 4.6 OR -7.6

using the positive value, the w = 4.6 m, l = 4.6 + 3 = 7.6 m

Learn more about area of rectangle at:

https://brainly.com/question/25292087

#SPJ1

l

The equations that represent a linear function are :

A linear function is a function that represents a straight line on the coordinate plane.  The degree of a linear equation must be 0 or 1 for each of its variables.

A linear function has the following form. y = mx + b.

A linear function has one independent variable and one dependent variable. The independent variable is x and the dependent variable is y.

Therefore, linear function can be represented in slope intercept form as follows;

y = mx + b

where

Therefore, the linear function of the equations are as follows;

learn more on linear function here: https://brainly.com/question/20286983

#SPJ1

The probability of drawing two numbers from both jars whose product is even = 5/9.

Probability refers to potential. A random event's occurrence is the subject of this area of mathematics. The range of the value is 0 to 1. Mathematics has incorporated probability to forecast the likelihood of various events. The degree to which something is likely to happen is basically what probability means. You will understand the potential outcomes for a random experiment using this fundamental theory of probability, which is also applied to the probability distribution. Knowing the total number of outcomes is necessary before we can calculate the likelihood that a specific event will occur.

Total number of outcomes =9

Favorable cases = (1,2), (2,1), (3,2), (2,3), (2,2)

The probability of drawing two numbers from both the jars whose product is even = 5/9

To know more about probability visit: brainly.com/question/11234923

#SPJ4

The probability that the product of the two two-digit numbers is less than 200 is given as follows:

43/8010.

A probability is calculated as the division of the number of desired outcomes in the context of the experiment by the number of total outcomes.

There are 90 different two-digit numbers, hence the number of total outcomes for the product is of:

90 x 89 = 8010.

(the numbers have to be different)

The desired outcomes which result in a product of less than 200 are of given as follows:

Hence the number of desired outcomes is given as follows:

9 + 8 + 6 + 5 + 4 + 4 + 3 + 2 + 2 = 43.

Meaning that the probability is of:

43/8010.

More can be learned about probabilities at https://brainly.com/question/14398287

#SPJ1