Answer:
I don't see anything on your question?
How can a wire become magnetic?
add a resistor
point it north
heat it up
run a current through it
Answer:
Moving electrons always create a magnetic field. Electrons moving along a wire make a magnetic field that goes in circles around the wire. When you bend the wire into a coil, the magnetic fields around each loop of the coil add up to make a long , thin magnet with north at one end and south at the other.
Explanation:
A motorist travels due North at 90 km/h for 2 hours. She changes direction and travels West at 60 km/for 1 hour.
a) Calculate the average speed of the motorist [4]
b) Calculate the average velocity of the motorist.
Answer:
a. 50km/hr.
b. 10km/hr
Explanation:
Average speed, which is calculated by dividing the total distance travelled by the time interval as follows:
Average speed = total distance travelled ÷ time
Average velocity is calculated by dividing the total displacement by the time interval as follows:
Average velocity = change in displacement (∆x) ÷ time (t)
According to this question, a motorist travels due North at 90 km/h for 2 hours. She then changes direction and travels West at 60 km/for 1 hour.
Total distance of this journey is 90 + 60 = 150
Total time taken = 1 + 2 = 3hours
Average speed = 150/3
= 50km/hr.
b.) Average velocity = x2 - x1/t
Average velocity = 90 - 60/3
= 30/3
= 10km/hr
A rectangular field is of length 42 cm and breadth 25 m. Find the area of the field in SI unit. EXPLAIN STEP BY STEP
Answer:
the area of the rectangular field is 10.5 m²
Explanation:
Given;
length of the rectangular field, L = 42 cm = 0.42 m
breadth of the rectangular field, b = 25 m
The area of the rectangular field is calculated as follows;
Area = Length x breadth
Area = 0.42 m x 25 m
Area = 10.5 m²
Therefore, the area of the rectangular field is 10.5 m²
Study the position-time graph for a bicycle. Which statement is supported by the graph? Position vs Time O The bicycle has speed but not velocity. O The bicycle is moving at a constant velocity. O The bicycle has a displacement of 3 m. O The bicycle is not in motion. 3 Position (m) 0 1 2 3 4 5 Time (s) Next Submit Save and Exit Mark this and return tViewers/AssessmentViewer/Activit. 0 M M
Answer:
D) The bicycle is not in motion.
Explanation:
Study the position-time graph for a bicycle.
Which statement is supported by the graph?
A) The bicycle has speed but not velocity.
B) The bicycle is moving at a constant velocity.
C) The bicycle has a displacement of 3 m.
D) The bicycle is not in motion.
Solution:
Velocity is the time rate of change of displacement. It is the ratio of displacement to time taken.
Speed is the time rate of change of distance. It is the ratio of distance to time taken.
From the position-time graph, we can see that the bicycle has a constant positon of 3 m for the whole of the time. That is the position remains 3 m even as the time changes. Therefore, we can conclude that the bicycle is not in motion.
From the position-time data provided, it can concluded that the bicycle is not in motion.
MotionMotion of a body involves a change in the position of that body with time.
A body in motion is constantly changing position or orientation as time passes.
The body may move with constant velocity/speed or changes in its velocity.
A position-time graph provides information about the motion of a body.
From the data provided:
At time 0, the bicycle is at position 3At time 1, the bicycle is at position 3At time 2, the bicycle is at position 3At time 3, the bicycle is at position 3At time 4, the bicycle is at position 3At time 5, the bicycle is at position 3The position of the bicycle remains the same for all time intervals.
Therefore, from the position-time data provided, it can concluded that the bicycle is not in motion.
Learn more about motion and position-time graph at: https://brainly.com/question/2356782
1. Lifting an elevator 18m takes 100kJ. If doing so takes 20s, what is the average power of the elevator during the process?
2. How much work can a 0.4 hp electric mixer do in 15 s?
Answer:
1. Power = 5000 Watts
2. Workdone = 11185.5 Joules
Explanation:
Given the following data;
1. Distance = 18 m
Energy = 100 KJ = 100,000 Joules
Time = 20 seconds
To find the average power of the elevator;
Power = energy/time
Power = 100000/20
Power = 5000 Watts
2. Power = 0.4 HP
Time = 15 seconds
Conversion:
1 horsepower = 745.7 Watts
0.4 horsepower = 0.4 * 745.7 = 298.28 Watts
To find the amount of work done by the electric mixer;
Work done = power * time
Workdone = 745.7 * 15
Workdone = 11185.5 Joules
As part of a safety investigation, two 1300 kg cars traveling at 17 m/s are crashed into different barriers. Find the average forces exerted on:
a. the car that hits a line of water barrels and takes 1.5 s to stop
b. the car that hits a concrete barrier and takes 0.10 s to stop.
Answer:
a. F = 14,733.33 N
b. F = 221,000 N
Explanation:
Given;
mass of the cars, m = 1300 kg
velocity of the cars, v = 17 m/s
time taken for the first car to stop after hitting a barrier, t = 1.5 s
time taken for the second car to stop after hitting a barrier, t = 0.1 s
The average forces exerted on each car is calculated as follows;
a. the car that hits a line of water barrels and takes 1.5 s to stop
[tex]F = ma = m\times \frac{v}{t} = 1300 \times \frac{17}{1.5} = 14,733.33 \ N\\\\F = 14,733.33 \ N[/tex]
b. the car that hits a concrete barrier and takes 0.10 s to stop
[tex]F = ma = m\times \frac{v}{t}= 1300 \times \frac{17}{0.1} = 221,000 \ N\\\\F = 221,000 \ N[/tex]
Suppose that 2 J of work is needed to stretch a spring from its natural length of 28 cm to a length of 43 cm. (a) How much work is needed to stretch the spring from 33 cm to 35 cm
Answer:
0.035 J
Explanation:
Applying,
W = ke²/2.............. Equation 1
Where W = workdone by the stretching the spring, k = spring constant, e = extension.
make k the subject of the equation
k = 2W/e²............... Equation 2
From the question
Given: W = 2 J, e = (43-28) = 15 cm = 0.15 m
Substitute these values into equation 2
k = (2×2)/(0.15²)
k = 177.78 N/m
Hence, work need to stretch the spring from 33 cm to 35 cm
therefore,
e = 35-33 = 2 cm = 0.02 m
Substitute into equation 1
W = 177.78(0.02²)/2
W = 0.035 J
the two factors that affect the amount of heat
Answer:
The two important factors that affect heat energy are specific heat and temperature. Specific heat is a heat-constant of a material per unit mass per degree of temperature change (in units of energy per mass and temperature), like Joules/Kg-°C .
Thank you.....
Have a good day.....
What happens if you move a magnet near a coil of wire?
A) current is induced
B)power is consumed
C)the coil becomes magnetized
D) the magnets field is reduced
The peak value of the electric field component of an electromagnetic wave is E. At a particular instant, the intensity of the wave is of 0.020 W/m2. If the electric field were increased to 5E, what would be the intensity of the wave?
Answer:
[tex]I_2=0.50 w/m^2[/tex]
Explanation:
From the question we are told that:
initial Intensity [tex]I_1=0.020 w/m^2[/tex]
Final Electric field [tex]E_2=5E[/tex]
Generally the equation for Relation ship between intensity and Electric field is mathematically given by
[tex]\frac{I_1}{I_2}= \frac{E_1^2}{E_2^2}[/tex]
Therefore
[tex]I_2=\frac{I_1}{ \frac{E_1^2}{E_2^2}}[/tex]
[tex]I_2=\frac{0.020}{ \frac{E^2}{5E^2}}[/tex]
[tex]I_2=0.50 w/m^2[/tex]
Give the number of protons and the number of neutrons in the nucleus of each of the following isotopes Aluminum 25 :13 protons and 12 neutrons
Answer:
No of proton is 13 and nucleus is 13
Calculate the heat energy conducted per hour through the side walls of a cylindrical steel
boiler of 1.00 m diameter and 3.0 m long if the internal and external temperatures of the
walls are 140 °C and 40 °C respectively and the thickness of the walls is 6.0 mm. (Thermal
conductivity of steel, k = 42 Wm-4°C-4)
Explanation:
heat caoacity and heat is difference
The heat energy conducted per hour through the side walls of the cylindrical steel boiler is 27708847 kJ.
What is thermal conductivity?The rate at which heat is transported by conduction through a material's unit cross-section area when a temperature gradient exits perpendicular to the area is known as thermal conductivity.
In the International System of Units (SI), thermal conductivity is measured by Wm⁻¹K⁻¹.
Diameter of the cylindrical steel boiler: d = 1.00m.
Length of the cylindrical steel boiler: l = 3.00m.
thickness of the walls is = 6.0 mm = 0.006 m
Temperature gradient is = (140-40) °C/0.006 m = 1666.67 °C/m
Thermal conductivity of steel, = 42 W/m-°C.
Hence, the heat energy conducted per hour through the side walls of the cylindrical steel boiler = 42×3600×1666.67 ×2π×0.5(0.5+3.0) Joule
= 27708847 kJ
Learn more about thermal conductivity here:
https://brainly.com/question/23897839
#SPJ2
A crane raises a crate with a mass of 150 kg to a height of 20 m. Given that
the acceleration due to gravity is 9.8 m/s2, what is the crate's potential energy
at this point?
Answer:
[tex]\boxed {\boxed {\sf 29,400 \ Joules}}[/tex]
Explanation:
Gravitational potential energy is the energy an object possesses due to its position. It is the product of mass, height, and acceleration due to gravity.
[tex]E_P= m \times g \times h[/tex]
The object has a mass of 150 kilograms and is raised to a height of 20 meters. Since this is on Earth, the acceleration due to gravity is 9.8 meters per square second.
m= 150 kg g= 9.8 m/s²h= 20 mSubstitute the values into the formula.
[tex]E_p= 150 \ kg \times 9.8 \ m/s^2 \times 20 \ m[/tex]
Multiply the three numbers and their units together.
[tex]E_p=1470 \ kg*m/s^2 \times 20 m[/tex]
[tex]E_p=29400 \ kg*m^2/s^2[/tex]
Convert the units.
1 kilogram meter square per second squared (1 kg *m²/s²) is equal to 1 Joule (J). Our answer of 29,400 kg*m²/s² is equal to 29,400 Joules.
[tex]E_p= 29,400 \ J[/tex]
The crate has 29,400 Joules of potential energy.
Answer:
29,400 J
Explanation:
did the quiz <3
20 pts.
A man forgets that he set his coffee cup on top of his car. He starts to drive and the coffee CUP rolls off the car onto the road. How does this scenario demonstrate the first law of motion? Be specific and use the words from the law in your answer.
Answer:
The cup is acted upon by an unbalanced force which is the acceleration of the car, but before it was an object at rest that stayed at rest.
Explanation:
Newton's first law of motion states, "if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force."
Since the cup is at rest while sitting on top of the car, it stays at rest as the car begins to move. Since the car is accelerating and the cup is not, the cup falls off of the car.
In a science fiction novel two enemies, Bonzo and Ender, are fighting in outer spce. From stationary positions, they push against each other. Bonzo flies off with a velocity of 1.1 m/s, while Ender recoils with a velocity of -4.3 m/s. Determine the ratio Bonzo/mEnder of the masses of these two enemies.
Answer:
the ratio Bonzo/mEnder of the masses of these two enemies is 3.91
Explanation:
Given the data in the question;
Velocity of Bonzo [tex]V_{Bonzo[/tex] = 1.1 m/s
Velocity of Ender [tex]V_{Ender[/tex] = -4.3 m/s
the ratio Bonzo/mEnder of the masses of these two enemies = ?
Now, using the law of conservation of momentum.
momentum of both Bonzo and Ender are conserved
so
Initial momentum = final momentum
we have
0 = [tex]m_{Bonzo[/tex] × [tex]V_{Bonzo[/tex] + [tex]m_{Ender[/tex] × [tex]V_{Ender[/tex]
[tex]m_{Bonzo[/tex] × [tex]V_{Bonzo[/tex] = -[ [tex]m_{Ender[/tex] × [tex]V_{Ender[/tex] ]
[tex]m_{Bonzo[/tex] / [tex]m_{Ender[/tex] = -[ [tex]V_{Ender[/tex] / [tex]V_{Bonzo[/tex] ]
we substitute
[tex]m_{Bonzo[/tex] / [tex]m_{Ender[/tex] = -[ -4.3 m/s / 1.1 m/s ]
[tex]m_{Bonzo[/tex] / [tex]m_{Ender[/tex] = -[ -3.9090 ]
[tex]m_{Bonzo[/tex] / [tex]m_{Ender[/tex] = 3.91
Therefore, the ratio Bonzo/mEnder of the masses of these two enemies is 3.91
You are using a constant force to speed up a toy car from an initial speed of 6.5 m/s
to a final speed of 22.9 m/s. If the toy car has a mass of 340 g, what is the work
needed to speed this car up?
By the work-energy theorem, the total work done on the car is equal to the change in its kinetic energy:
W = ∆K
W = 1/2 (0.34 kg) (22.9 m/s)² - 1/2 (0.34 kg) (6.5 m/s)²
W ≈ 82 J
An electric drill starts from rest and rotates with a constant angular acceleration. After the drill has rotated through a certain angle, the magnitude of the centripetal acceleration of a point on the drill is 8.2 times the magnitude of the tangential acceleration. What is the angle?
Answer:
The angle is 4.1 rad.
Explanation:
The centripetal acceleration (α) is given by:
[tex] \alpha = \omega^{2} r [/tex] (1)
Where:
ω: is the angular velocity
r: is the radius
And the tangential acceleration (a) is:
[tex] a = \alpha r [/tex] (2)
Since the magnitude of "α" is 8.2 times the magnitude of "a" (equating (2) and (1)) we have:
[tex] \omega^{2} r = 8.2\alpha r [/tex]
[tex] \omega^{2} = 8.2\alpha [/tex] (3)
Now, we can find the angle with the following equation:
[tex] \omega_{f}^{2} = \omega_{0}^{2} + 2\alpha \Delta \theta [/tex]
Where:
[tex] \omega_{f}[/tex]: is the final angular velocity [tex] \omega_{0}[/tex]: is the initial angular velocity = 0 (it starts from rest)
[tex]\Delta \theta[/tex]: is the angle
[tex] \omega^{2} = 2\alpha \Delta \theta [/tex] (4)
By entering equation (3) into (4) we can calculate the angle:
[tex] 8.2\alpha = 2\alpha \Delta \theta [/tex]
[tex] \Delta \theta = 4.1 rad [/tex]
Therefore, the angle is 4.1 rad.
I hope it helps you!
45. Pressure in air undergoes a decrease when the air
a) rises to higher altitudes.
b) accelerates to higher speed.
c) fills a greater space.
d) All of these.
Newton's law of cooling states that the rate of change of temperature of an object in a surrounding medium is proportional to the difference of the temperature of the medium and the temperature of the object. Suppose a metal bar, initially at temperature 50 degrees Celsius, is placed in a room which is held at the constant temperature of 40 degrees Celsius. One minute later the bar has cooled to 40.18316 degrees . Write the differential equation that models the temperature in the bar (in degrees Celsius) as a function of time (in minutes). Hint: You will need to find the constant of proportionality. Start by calling the constant k and solving the initial value problem to obtain the temperature as a function of k and t . Then use the observed temperature after one minute to solve for k .
Answer:
Newton's law of cooling says that the temperature of a body changes at a rate proportional to the difference between its temperature and that of the surrounding medium (the ambient temperature); dT/dt = -K(T - Tₐ) where T = the temperature of the body (°C), t = time (min), k = the proportionality constant (per minute),
Explanation:
A plane has a mass of 360,000 kg takes-off at a speed of 300 km/hr. i) What should be the minimum acceleration to take off if the length of the runway is 2.00 km.ii) At this acceleration, how much time would the plane need from starting to takeoff. iii) What force must the engines exert to attain this acceleration
Answer:
i) the minimum acceleration to take off is 22500 km/h²
ii) the required time needed by the plane from starting to takeoff is 0.0133 hrs
iii) required force that the engine must exert to attain acceleration is 625 kN
Explanation:
Given the data in the question;
mass of plane m = 360,000 kg
take of speed v = 300 km/hr = 83.33 m/s
i)
What should be the minimum acceleration to take off if the length of the runway is 2.00 km
from Newton's equation of motion;
v² = u² + 2as
we know that a plane starts from rest, so; u = 0
given that distance S = 2 km
we substitute
(300)² = 0² + ( 2 × a × 2 )
90000 = 4 × a
a = 90000 / 4
a = 22500 km/h²
Therefore, the minimum acceleration to take off is 22500 km/h²
ii) At this acceleration, how much time would the plane need from starting to takeoff.
from Newton's equation of motion;
v = u + at
we substitute
300 = 0 + 22500 × t
t = 300 / 22500
t = 0.0133 hrs
Therefore, the required time needed by the plane from starting to takeoff is 0.0133 hrs
iii) What force must the engines exert to attain this acceleration
we know that;
F = ma
acceleration a = 22500 km/hr² = 1.736 m/s²
so we substitute
F = 360,000 kg × 1.736 m/s²
F = 624960 N
F = 625 kN
Therefore, required force that the engine must exert to attain acceleration is 625 kN
In the Biomedical and Physical Sciences building at MSU there are 135 steps from the ground floor to the sixth floor. Each step is 16.6 cm tall. It takes 5 minutes and 30 seconds for a person with a mass of 73.5 kg to walk all the way up. How much work did the person do?
Answer:
W = 16.4 kJ
Explanation:
Given that,
There are 135 steps from the ground floor to the sixth floor.
Each step is 16.6 cm tall.
The mass of a person, m = 73.5 kg
We need to find the work done by the person. We know that,
Work done = Fd
Where
d is the displacement, d = 135 × 0.166 = 22.41
So,
W = 73.5 × 10 × 22.41
= 16471.35 J
or
W = 16.4 kJ
So, 16.4 kJ is the work done by the person.
An unstretched ideal spring hangs vertically from a fixed support. A 0.4 kg object is then attached to the lower end of the spring. The object is pulled down to a distance of 0.35 m below the unstretched position and released from rest at time t= 0. A graph of the subsequent vertical position y of the lower end of the spring as a function of t is given above, where y= 0 when the spring was initially unstretched. At which time is the upward velocity of the object the greatest?
Answer:
The correct answer will be "0.25 sec".
Explanation:
The graph of the given question is attached below.
According to the graph of the question,
Time,
T = 1 sec
For the upward velocity,
⇒ [tex]t = \frac{T}{4}[/tex]
By putting the value, we get
⇒ [tex]=\frac{1}{4}[/tex]
⇒ [tex]=0.25 \ sec[/tex]
what is newtons 2nd law
According to the Newton's second law :- The acceleration of an object is directly related to the net force and inversely related to its mass. Acceleration of an object depends on two things, force and mass.
What does it mean when work is positive?
O Velocity is greater than kinetic energy
O Kinetic energy is greater than velocity
The environment did work on an object.
O An object did work on the environment.
d. An object did work on the environment.
Explanation:Work is defined in many contexts. Some of these are;
i. Work is the product of force and displacement. In this case, work done is positive if the force applied on an object or body and the displacement caused by the force are in the same direction. If instead the force and displacement are in opposite direction, then the work done will be negative. If it is the case the force and the displacement are perpendicular to each other, the work done is zero.
ii. In the first law of thermodynamics, the internal energy of a system is the sum of the work done and the heat exchanged between the system and the environment. Therefore, work done is the difference between the internal energy of a system and the heat exchanged between the system and the environment.
In this case, work is said to be positive if work is done by the system (object) on the environment. It is negative if work is done by the environment on the system (object).
Answer:
its c
Explanation:
violations in a responsible manner in a democratic society?
Activity 5:
Ending
From your findings, what conclusions and recommendations can you make on the
issue of human rights violations to:
5.1
Government
Answer:
Kindly check explanation
Explanation:
The trampling and violation of human rights individuals, groups and corporate organizations is really alarming ad as such, the government who are charged to protect the right and interest of its citizen. In other to curtail the trending issues of human right violation, it is imperative if sensitization programmes could be organiz d in other to keep people informed of the various ways in which people's right may be trampled upon. With these education, the ignorance can be expunged leaving only those who genuinely decides to relate and threaten the right of his fellow country person.
The laws on human right violation should be reviewed and capital punishment metted on violators in other to send a strong warning to those who still nurture the intention.
The two most prominent wavelengths in the light emitted by a hydrogen discharge lamp are 656 nm (red) and 486 nm (blue). Light from a hydrogen lamp illuminates a diffraction grating with 550 lines/mm , and the light is observed on a screen 1.7 m behind the grating.
What is the distance between the first-order red and blue fringes?
Express your answer to two significant figures and include the appropriate units.
Answer:
Δd = 7.22 10⁻² m
Explanation:
For this exercise we must use the dispersion relationship of a diffraction grating
d sin θ = m λ
let's use trigonometry
tan θ = y / L
how the angles are small
tant θ = sinθ /cos θ = sin θ
we substitute
sin θ = y / L
d y / L = m λ
y = m λ L / d
let's use direct ruler rule to find the distance between two slits
If there are 500 lines in 1 me, what distance is there between two lines
d = 2/500
d = 0.004 me = 4 10⁻⁶ m
diffraction gratings are built so that most of the energy is in the first order of diffraction m = 1
let's calculate for each wavelength
λ = 656 nm = 656 10⁻⁹ m
d₁ = 1 656 10⁻⁹ 1.7 / 4 10⁻⁶
d₁ = 2.788 10⁻¹ m
λ = 486 nm = 486 10⁻⁹ m
d₂ = 1 486 10⁻⁹ 1.7 / 4 10⁻⁶
d₂ = 2.066 10⁻¹ m
the distance between the two lines is
Δd = d1 -d2
Δd = (2,788 - 2,066) 10⁻¹
Δd = 7.22 10⁻² m
A light-emitting diode (LED) connected to a 3.0 V power supply emits 440 nm blue light. The current in the LED is 11 mA , and the LED is 51 % efficient at converting electric power input into light power output. How many photons per second does the LED emit?
Answer:
3.73 * 10^16 photons/sec
Explanation:
power supply = 3.0 V
Emits 440 nm blue light
current in LED = 11 mA
efficiency of LED = 51%
Calculate the number of photons per second the LED will emit
first step : calculate the energy of the Photon
E = hc / λ
=( 6.62 * 10^-34 * 3 * 10^8 ) / 440 * 10^-9
= 0.0451 * 10^-17 J
Next :
Number of Photon =( power supply * efficiency * current ) / energy of photon
= ( 3 * 0.51 * 11 * 10^-3 ) / 0.0451 * 10^-17
= 3.73 * 10^16 photons/sec
The triceps muscle in the back of the upper arm extends the forearm. This muscle in a professional boxer exerts a force of 2.00\times 10^32.00×10 ^3 N with an effective perpendicular lever arm of 3.00 cm, producing an angular acceleration of the forearm of 120 rad/s^2 .
What is the moment of inertia of the boxer's forearm?
Answer:
Explanation:
From the given information:
The torque produced due to the force can be expressed as:
[tex]\tau = F \times r[/tex]
where;
[tex]\tau[/tex] = torque
F = force exerted
r = lever's arm radius
[tex]\tau[/tex] = [tex]2.00 \times 10^3 \times 0.03 m[/tex]
[tex]\tau[/tex] = 60 N.m
However, equating the torque with the moment of inertia & angular acceleration, we use the equation:
[tex]\tau[/tex] = I∝
60 Nm = I × 120 rad/s²
I = 60 Nm/120 rad/s²
I = 0.5 kg.m²
does net force stay the same when a massless pulley is replaced by a pulley with mass
A professional quarterback throws a 0.40 kg football. what is the force of weight?
Answer:
3.92N
Explanation:
Force= mass×accelerarion due gravity
But mass= 0.40kg
acceleration due to gravity = 9.8 m/s^2
Force = 0.40×9.8
Force=3.92N
