is a polyprotic acid. Write balanced chemical equations for the sequence of reactions that carbonic acid can undergo when it's dissolved in water.
Answer:
H₂CO₃ H₂O ⇄ HCO₃⁻ + H₃O⁺ Ka1
HCO₃⁻ + H₂O ⇄ CO₃⁻² + H₃O⁺ Ka2
CO₃⁻² + H₂O ⇄ HCO₃⁻ + OH⁻ Kb1
HCO₃⁻ + H₂O ⇄ H₂CO₃ + OH⁻ Kb2
Explanation:
Formula for carbonic acid is: H₂CO₃
It is a dyprotic acid, because it can release two protons. We can also mention that is a weak one. The equilibrums are:
H₂CO₃ H₂O ⇄ HCO₃⁻ + H₃O⁺ Ka1
HCO₃⁻ + H₂O ⇄ CO₃⁻² + H₃O⁺ Ka2
When the conjugate strong bases, carbonate and bicarbonate take a proton from water, the reactions are:
CO₃⁻² + H₂O ⇄ HCO₃⁻ + OH⁻ Kb1
HCO₃⁻ + H₂O ⇄ H₂CO₃ + OH⁻ Kb2
Notice, that bicarbonate anion can release or take a proton to/from water. This is called amphoteric,
Chlorine can be prepared in the laboratory by the reaction of manganese dioxide with hydrochloric acid, HCl(aq), as
described by the chemical equation
MnO,(s) + 4 HCl(aq)
MnCl(aq) + 2 H2O(l) + Cl (8)
How much MnO(s) should be added to excess HCl(aq) to obtain 175 mL C12(g) at 25 °C and 715 Torr?
mass of MnO2
Answer:
Explanation:
MnO₂(s) + 4 HCl(aq) = MnCl₂(aq) + 2 H₂O(l) + Cl₂
87 g 22.4 x 10³ mL
volume of given chlorine gas at NTP or at 760 Torr and 273 K
= 175 x ( 273 + 25 ) x 715 / (273 x 760 )
= 179.71 mL
22.4 x 10³ mL of chlorine requires 87 g of MnO₂
179.4 mL of chlorine will require 87 x 179.4 / 22.4 x 10³ g
= 696.77 x 10⁻³ g
= 696.77 mg .
Janet observes that bubbles rise inside water when water is heated. Which of the following best names and explains the change that causes bubbles to rise?
Answer:
Boiling
Explanation:
When a liquid is heated, the vapor pressure rises steadily. When water attains a temperature of 100°C or 212°F its vapor pressure is now equal to the atmospheric pressure at sea level, this is what we mean by boiling.
When this occurs, water continues to evaporate untill the vapor pressure inside the bubbles becomes high enough to stop water bubbles from collapsing again from the pressure of the water around it so the bubbles rise and break the surface.
What creation would you make if you had access to any of the chemical elements? can someone answer this for me please.
Answer:
Depends on the chemicals.
Explanation:
The creation of something depends on the chemical we have. If I have chemicals such as acid and base so I can produce salt and water by mixing acid and base. If I have ethanol, vegetable oil and sodium hydroxide which is a catalyst, I can produce biodiesel which can be used in vehicles instead of fossil fuel. If I have sodium element and chlorine gas, I can produce sodium chloride also known as table salt.
Identify four general properties that make an NSAID unique as compared to the NSAID aspirin. List specific properties that make aspirin, naproxen, and ibuprofen unique from one another
Answer:
NSAIDs are steroidal anti-inflammatories, their action is on the phospholipase A2 enzyme, this enzyme is responsible for breaking down the phospholipids of the membrane to trigger an inflammatory response. This is how steroidal anti-inflammatory drugs inhibit ALL inflammatory pathways (not like NSAIDs that they only inhibit the COX pathway).
These corticosteroid drugs cannot exceed the systemic mineralocorticoid value 1 in the body, since this corticosteroid hormone is also released by the adrenal cortex.
The NSAIDs generate: sporadic peaks in blood glucose, hypertension, fluid retention, increase in body fat mass, possible suppression of the adrenal cortex over time, inhibiting endogenous synthesis of corticosteroids.
On the other hand, naproxen and ibuprofen are NSAIDs, that is, non-steroidal anti-inflammatory drugs that do not influence both routes of inflammation, but only COX, this enzyme is abbreviated as COX but is called cyclooxygenase, and is responsible for a single route of inflammation.
NSAIDs such as naproxen and ibuprofen can cause gastric disorders such as ulcers or gastritis if they are consumed in a very repetitive manner.
In addition, both drugs are anti-inflammatory, analgesic and antipyretic. Although its two main functions are the first two, it was shown to have an effect in lowering body temperature.
That they are anti-inflammatory means that they inhibit the path of inflammation and analgesics the path of pain.
Explanation:
Both types of drugs generate the same effect but by different mechanisms.
Some are steroids and others are not, although steroids are considered to have a greater risk of benefit that is why they are administered against more systematically compromised instances such as anaphylactic shock.
NSAIDs such as naproxen and ibuprofen are the most prescribed today, since they have few risks and very good benefits, meaning that their adverse effects are not lethal or highly relevant and have a good effect on symptoms.
Both must be administered with care when treating a diabetic patient since corticosteroids generate glycemic peaks or increase in blood glucose, and NSAIDs compete for plasma protein with oral hypoglycemic agents, thus generating that these are in higher free concentrations. high diffusing better through the tissues and increases the potency of the adverse effects of these.
Check 0/1 ptRetries 5 Element R has three isotopes. The isotopes are present in 0.0825, 0.2671, and 0.6504 relative abundance. If their masses are 97.62, 109.3, and 138.3 respectively, calculate the atomic mass of element R.
Answer:
Atomic mass = 127.198 amu
Explanation:
The average atomic mass is obtained by summing the masses of the isotopes each multiplied by its abundance.
Atomic mass = (97.62 * 0.0825) + (109.3 * 0.2671) + (138.3 * 0.6504)
Atomic mass = 8.05365 + 29.19403 + 89.95032
Atomic mass = 127.198 amu
The normal boiling point of a liquid is 282 °C. At what temperature (in °C) would the vapor pressure be 0.350 atm? (∆Hvap = 28.5 kJ/mol)
Answer:
The temperature at which the vapor pressure would be 0.350 atm is 201.37°C
Explanation:
The relationship between variables in equilibrium between phases of one component system e.g liquid and vapor, solid and vapor , solid and liquid can be obtained from a thermodynamic relationship called Clapeyron equation.
Clausius- Clapeyron Equation can be put in a more convenient form applicable to vaporization and sublimation equilibria in which one of the two phases is gaseous.
The equation for Clausius- Clapeyron Equation can be expressed as:
[tex]\mathtt{In \dfrac{P_2}{P_1}= \dfrac{\Delta \ H _{vap}}{R} \begin {pmatrix} \dfrac{T_2 -T_1}{T_2 \ T_1} \end {pmatrix} }[/tex]
where ;
[tex]P_1[/tex] is the vapor pressure at temperature 1
[tex]P_ 2[/tex] is the vapor pressure at temperature 2
∆Hvap = enthalpy of vaporization
R = universal gas constant
Given that:
[tex]P_1[/tex] = 1 atm
[tex]P_ 2[/tex] = 0.350 atm
∆Hvap = 28.5 kJ/mol = 28.5 × 10³ J/mol
[tex]T_1[/tex] = 282 °C = (282 + 273) K = 555 K
R = 8.314 J/mol/k
Substituting the above values into the Clausius - Clapeyron equation, we have:
[tex]\mathtt{In \dfrac{P_2}{P_1}= \dfrac{\Delta \ H _{vap}}{R} \begin {pmatrix} \dfrac{T_2 -T_1}{T_2 \ T_1} \end {pmatrix} }[/tex]
[tex]\mathtt{In \begin {pmatrix} \dfrac{0.350}{1} \end {pmatrix} } = \dfrac{28.5 \times 10^3 }{ 8.314 } \begin {pmatrix} \dfrac{T_2 - 555}{555T_2} \end {pmatrix} }[/tex]
[tex]\mathtt{In \begin {pmatrix} \dfrac{0.350}{1} \end {pmatrix} } = \dfrac{28.5 \times 10^3 }{ 8.314 } \begin {pmatrix} \dfrac{1}{555}- \dfrac{1}{T_2} \end {pmatrix} }[/tex]
[tex]- 1.0498= 3427.953 \begin {pmatrix} \dfrac{1}{555}- \dfrac{1}{T_2} \end {pmatrix} }[/tex]
[tex]\dfrac{- 1.0498}{3427.953}= \begin {pmatrix} \dfrac{1}{555}- \dfrac{1}{T_2} \end {pmatrix} }[/tex]
[tex]- 3.06246906 \times 10^{-4}= \begin {pmatrix} \dfrac{1}{555}- \dfrac{1}{T_2} \end {pmatrix} }[/tex]
[tex]\dfrac{1}{T_2} = \begin {pmatrix} \dfrac{1}{555}+ (3.06246906 \times 10^{-4} ) \end {pmatrix} }[/tex]
[tex]\dfrac{1}{T_2} = 0.002108048708[/tex]
[tex]T_2 = \dfrac{1}{0.002108048708}[/tex]
[tex]\mathbf{T_2 }[/tex] = 474.37 K
To °C ; we have [tex]\mathbf{T_2 }[/tex] = (474.37 - 273)°C
[tex]\mathbf{T_2 }[/tex] = 201.37 °C
Thus, the temperature at which the vapor pressure would be 0.350 atm is 201.37 °C
The temperature of the liquid at the given vapor pressure is 201.5 ⁰C.
The given parameters;
boiling point temperature, = 282 ⁰Cvapor pressure, P₂ = 0.35 atmenthalpy of vaporization, ∆Hvap = 28.5 kJ/molThe temperature of the liquid will be determined by applying Clausius- Clapeyron Equation;
[tex]ln(\frac{P_2}{P_1} ) = \frac{\Delta H}{R} (\frac{T_2 -T_1}{T_1T_2} )[/tex]
where;
R is ideal gas constant = 8.314 J/mol.kT₁ is the initial temperature in Kelvin = 282 + 273 = 555 KP₁ is the initial pressure = 1 atm[tex]ln(\frac{P_2}{P_1} ) = \frac{\Delta H}{R} (\frac{T_2 -T_1}{T_1T_2} )\\\\ln(\frac{0.35}{1} ) = \frac{28.5 \times 10^3}{8.314} (\frac{T_2 - 555}{555T_2} )\\\\-1.049 = 6.176- \frac{3427.95}{T_2} \\\\\frac{3427.95}{T_2} = 6.176 + 1.049\\\\\frac{3427.95}{T_2} = 7.225\\\\T_2 = \frac{3427.95}{7.225} \\\\T_2 = 474.5 \ K\\\\T_2 = 474.5 - 273 = 201.5 \ ^0C[/tex]
Thus, the temperature of the liquid at the given vapor pressure is 201.5 ⁰C.
Learn more here:https://brainly.com/question/1077674
Which of the following processes is spontaneous? Select the correct answer below:
a. carbon graphite turning to carbon diamond at normal pressure
b. carbon diamond turning to carbon graphite at normal pressure
c. carbon diamond turning to carbon graphite at high pressure
d. none of the above
Answer:
b. carbon diamond turning to carbon graphite at normal pressure.
Explanation:
Graphite is the stable form of the carbon element under normal ambient pressure. The process of conversion of carbon diamond to carbon graphite is a spontaneous process under typical ambient conditions, since diamonds are said to be thermodynamically unstable but kinetically stable under ambient conditions, and the process of conversion can take place without a continuous input of energy from an external source.
If 1 mol of a pure triglyceride is hydrolyzed to give 2 mol of RCOOH, 1 mol of R'COOH, and 1 mol of glycerol, which of the following compounds might be the triglyceride?
CHOC(O)R
A. CHOC(O)R
CHOC(O)R
CH,OC(O)R
B. CHOC(O)R
CH2OC(O)R
CHOC(O)R
C. CHOC(O)R
CHOC(O)R
CHOC(O)R
D. CHOC(O)R
CHOC(O)R
Answer:
The correct option is C.
Note the full question and structure of the moleculesis found in the attachment below.
Explanation:
Triglycerides or triacylglycerols are non-polar, hydrophobic lipid molecules composed of three fatty acids linked by ester bonds to a molecule of glycerol.
The fatty acids linked to the glycerol molecule are denoted by R and may be of the same kind or different. when the R group is the same, the R is attached in all the three positions for ester bonding in the glycerol molecule but when they are different are denoted by R, R' and R'' respectively.
During the hydrolysis of triglycerides, the three fatty acids molecules are obtained as well as a glycerol molecule.
From the question, when 1 mole of the triglyceride is hydrolysed, 2 moles of RCOOH, 1 mole of R'COOH and 1 mole of glycerol is obtained. The triglyceride must then be composed of two fatty acids which are the same denoted by R, and a different fatty acid molecule denoted by R'.
The correct option therefore, is C
Calculate the [H+] and pH of a 0.0010 M acetic acid solution. The Ka of acetic acid is 1.76×10−5. Use the method of successive approximations in your calculations.
Answer:
[tex][H^+]=0.000123M[/tex]
[tex]pH=3.91[/tex]
Explanation:
Hello,
In this case, dissociation reaction for acetic acid is:
[tex]CH_3COOH\rightleftharpoons CH_3COO^-+H^+[/tex]
For which the equilibrium expression is:
[tex]Ka=\frac{[CH_3COO^-][H^+]}{[CH_3COOH]}[/tex]
Which in terms of the reaction extent [tex]x[/tex] could be written as:
[tex]1.74x10^{-5}=\frac{x*x}{[CH_3COOH]_0-x}=\frac{x*x}{0.0010M-x}[/tex]
Thus, solving by using a solver or quadratic equation we obtain:
[tex]x_1=0.000123M\\\\x_2=-0.000141M[/tex]
And clearly the result is 0.000123M, which also equals the concentration of hydronium ion in solution:
[tex][H^+]=0.000123M[/tex]
Now, the pH is computed as follows:
[tex]pH=-log([H^+])=-log(0.000123)\\\\pH=3.91[/tex]
Best regards.
For each of the processes, determine whether the entropy of the system is increasing or decreasing.
a. A snowman melts on a spring day.
b. A document goes through a paper shredder.
c. A water bottle cools down in a refrigerator.
d. Silver tarnishes
e. Dissolved sugar precipitates out of water to form rock candy.
Explanation:
Entropy refers to the degree of disorderliness of a system.
a. A snowman melts on a spring day.
Entropy is increasing because there is a change in state of matter from solid to liquid. Liquid particles have more freedom f movement compared to solids.
b. A document goes through a paper shredder.
Entropy increases because random, disorganized bits of paper are left.
c. A water bottle cools down in a refrigerator.
Entropy decreases because temperature is directly proportional to entropy.
d. Silver tarnishes
Entropy increases because random bits of the sliver particles are formed.
e. Dissolved sugar precipitates out of water to form rock candy.
Entropy decreases because the random dissolved sugar precipitates are ordered into a rock candy.
What is the result in the double displacement reaction of hydrochloric acid and
lithium carbonate?
Answer:
Lithium chloride (LiCl), carbon dioxide, and water
Explanation:
Li₂CO₃ + HCl ⇒ LiCl + CO₂ + H₂O
When lithium carbonate reacts with hydrochloric acid, lithium chloride, water, and bubbles of carbon dioxide gas are given off. This is the result of a double displacement reaction followed by a decomposition reaction.
Hope that helps.
Rank the following amine derivatives from highest acidity (lowest pKa value) to lowest acidity (highest pKa value).
Highest acidity
anilinium ion
aniline
ammonium ion
secondary amine
amide
Lowest acidity
Answer:
anilinium ion > ammonium ion > amide > aniline > secondary amine
Explanation:
Acidity of amine derivatives can derived from their pKa values.
The rule of thumb for acidity with relation to pKa values is that:
As the pKa decreases the acid strength increases and the conjugate base decreases. Similarly, as the pKa increases, the acid strength decreases and the conjugate base increase.
Hence the stronger the acid , the lower pKa value and the weaker the acid , the stronger the pKa value.
So the pKa value for anilinium ion = 4.6
ammonium ion = 9.4
Amide = 15
Similarly, for aniline and secondary amine, in order to determine the derivative with the higher acidity, we will consider the electron withdrawing substituent group.
The more difficult the electron are being withdraw from the electron withdrawing substituent , the more acidic the compound.
In aniline , the stabilized benzene ring attached to NH₂ makes it a less electron withdrawing group compared to the straight chains structure found in secondary amine where electron are easily withdraw by nucleophilic substitution reactions.
Thus, from highest acidity (lowest pKa value) to lowest acidity (highest pKa value).
the amine derivatives ranking is as follows:
anilinium ion > ammonium ion > amide > aniline > secondary amine
which of the following compounds are polar: CH2Cl2, HBr?
Answer : HBr polar
please add me to brainalist
PLEASE HELP WILL GIVE BRAINLIEST!!!
Refining aluminum takes place in steel vats lined with graphite. What function does the graphite lining serve?
A. It is the cathode.
B. It is the anode.
C. It soaks up the waste oxygen released from bauxite (Al2O3)
D. It serves as a grounding layer to prevent electrical surges.
Answer: It's the anode broski (B)
Explanation: I'm taking the Chem summer course too broski, this was the correct answer. Cheers broski
What is the energy of a photon of electromagnetic radiation with a wavelength of 963.5 nm? (c = 3.00 × 108 m/s, h = 6.63 × 10–34 J · s
Answer:
[tex]E=2.06\times 10^{-19}\ J[/tex]
Explanation:
Given that,
The wavelength of electromagnetic radiation is 963.5 nm.
We need to find the energy of a photon with this wavelength.
The formula used to find the energy of a photon is given by :
[tex]E=\dfrac{hc}{\lambda}\\\\E=\dfrac{6.63\times 10^{-34}\times 3\times 10^8}{963.5\times 10^{-9}}\\\\E=2.06\times 10^{-19}\ J[/tex]
So, the energy of a photon is [tex]2.06\times 10^{-19}\ J[/tex].
The respiration rate of a goldfish is measured. The goldfish is then placed in cold water and the respiration rate is measured again. What is the INDEPENDENT variable?
Answer:
Temperature of the water
Explanation:
In every study, there must be independent and dependent variables. An independent variable is the variable that is changed in order to obtain a response. In this case, the temperature of the water is being changed, the response in this experiment is the respiration rate of the goldfish.
Thus the respiration rate of the goldfish is the dependent variable because it is controlled by the temperature of the water and changes accordingly.
Summarily, the independent variable is the temperature of the water while the dependent variable is the respiration rate of the goldfish.
As a reaction proceeds, the ratio between the rate of consumption of reactant and the rate of formation of product:
Answer:
Depends on the reaction.
Explanation:
Hello,
In this case, the answer is depends on the reaction since the ratios between the rates of both consumption and formation depend upon the stoichiometric coefficients in the chemical reaction. For instance, for the reaction:
A -> 2B
The relationship is:
[tex]\frac{1}{-1}r_A =\frac{1}{2} r_B[/tex]
Therefore, we can see that the rate of consumption of A half the rate of formation of B, but is we consider the following chemical reaction:
2A -> B
The relationship is:
[tex]\frac{1}{-2}r_A =\frac{1}{1} r_B[/tex]
Therefore we can see that the rate of consumption of A doubles the rate of consumption of B.
Best regards.
What is the initial temperature (°C) of a system that has the pressure decreased by 10 times while the volume increased by 5 times with a final temperature of -123°C?
Answer:
27°C or 300K
Explanation
We were told that the pressureof the system decreased by 10 times implies that P2= P1/10
Where P2=final pressure
P1= initial pressure
Wew were also told that the volume of the system increased by 5 times this implies that V2= 5×V1
Where T2= final temperature =-123C= 273+(-123C)=150K
T1= initial temperature
But from gas law
PV=nRT
As n and R are constant
P1V1/T1 = P2V2/T2
T1= P1V1T2/P2V2
T1=2×T2
T1=2×150
T1=300K
=300-273
=27°C
the initial temperature (°C) of a system is 27°C
Which of the following solutions is acidic? [H3O+] = 1.0 x 10-10 M [H3O+] < 1.0 x 10-7 M [OH-] = 1.0 x 10-10 M [OH-] = 1.0 x 10-7 M [OH-] > 1.0 x 10-7 M
Answer:
[OH-] = 1.0 x 10-10 M
Explanation:
The acidity of a solution can be determined directly from the concentration of the hydrogen ions and indirectly from the concentrations of the hydroxide ions.
Generally, for a neutral solution we have;
[H3O+] = [OH-] = 1.0 x 10-7 M
For an acidic solution;
[H3O+] > 1.0 x 10-7 M
[OH-] < 1.0 x 10-7 M
Comparing the options the correct option is;
[OH-] = 1.0 x 10-10 M
How many moles of bromine will react with 0.0500 mole of C 2H 2 in the reaction C 2H 4 + Br 2 → C 2H 4Br 2?
Answer:
0.05 mole of Br2.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
C2H4 + Br2 —› C2H4Br2
From the balanced equation above,
1 mole of C2H4 reacted with 1 mole of Br2 to produce 1 mole of C2H4 Br2.
Finally, we shall determine the number of moles bromine that will react with 0.05 mole of C2H2.
The number of mole of Br2 needed for the reaction can be obtained as follow:
From the balanced equation above,
1 mole of C2H4 reacted with 1 mole of Br2.
Therefore, 0.05 mole of C2H4 will also react with 0.05 mole of Br2.
Therefore, 0.05 mole of Br2 is needed for the reaction.
In the following net ionic equation, identify each reactant as either a Bronsted-Lowry acid or a Bronsted-Lowry base.
HF-(aq) + H2O(l) rightarrow F-(aq) + H3O(aq)
B-L_____ B-L_____
The formula of the reactant that acts as a proton donor is_____.
The formula of the reactant that acts as a proton acceptor is_______.
Answer:
Bronsted lowry base = Proton acceptor = H2O
Bronsted lowry acid = Proton donor = HF-
Explanation:
The equation is given as;
HF-(aq) + H2O(l) --> F-(aq) + H3O(aq)
A bronsted lowry base is any specie that can accept hydrogen ion (proton) from another molecule.
Basically a bronsted lowry base is a proton acceptor while a bronsted lowry acid is a proton donor.
In the reaction above, upon comparing both the reactants and products;
Bronsted lowry base = Proton acceptor = H2O
Bronsted lowry acid = Proton donor = HF-
Why will the conjugate base of a weak acid affect pH? Select the correct answer below: it will react with hydroxide
Answer:
It will react with water
Explanation:
I know this is an older question, but I just wanted to provide the correct answer.
Since we are dealing with a weak base, and the acid is somewhat stronger, it will react with the water molecules to produce hydronium, which will affect the pH of the solution.
The conjugate base of a weak acid affect pH because it will react with hydronium ion.
A weak acid is an acid that does not dissociate completely in water. On the other hand, a strong acid achieves almost 100% dissociation in water.
Acids dissociate in water to yield the hydronium ion and a conjugate base. For instance, the weak acid, acetic acid is dissociated as follows;
CH3COOH(aq) + H2O(l) ⇄ CH3COO-(aq) + H3O+(aq)
We can see that the conjugate base( CH3COO-) could react with the hydronium ions thereby moving the equilibrium position to the left hand side and affecting the pH by decreasing the hydronium ion concentration.
Learn more: https://brainly.com/question/8592296
Missing parts;
Why will the conjugate base of a weak acid affect pH? Select the correct answer below: O it will react with hydroxide O it will react with water O it will react with hydronium O none of the above
Which of the following forms a molecular solid? Which of the following forms a molecular solid? C10H22 CaO gold C, graphite
Answer:
C10H22
Explanation:
Graphite is known as an allotrope of carbon. Its characteristics include being black and slippery and as used as lubricants.
Gold (Au) is an element on the periodic table with atomic number 79 and a mass number 197 which exists as a metal due to its hydrogen bonds.
C10H22 which is also known as decane belongs to the Alkane family.The General forces of attraction between the alkane family are weak but in the case of decade there is Van der waal force which makes Decane C10H22 a Molecular Solid.
To refine aluminum from its ore, aluminum oxide is electrolyzed to form aluminum and oxygen. At which electrode does oxygen form? options: A) Both the anode and the cathode B) Cathode C) Neither electrode D) Anode
Answer:
im pretty sure its the anode
Explanation:
To solve such, we must know the concept of electrolysis reaction. The correct option is option D among all given options. At anode electrode oxygen forms.
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.
Electrolysis is the process of passing an electric current through a material to cause a chemical change. A chemical change occurs when a material loses or acquires the electron. To refine aluminum from its ore, aluminum oxide is electrolyzed to form aluminum and oxygen. At anode electrode oxygen forms.
Therefore, the correct option is option D among all given options. At anode electrode oxygen forms.
Learn more about the chemical reactions, here:
https://brainly.com/question/3461108
#SPJ2
Which two layers are part of the thermosphere?
O exosphere and ionosphere
O ionosphere and mesosphere
mesosphere and stratosphere
O stratosphere and troposphere
The two layers are part of the thermosphere are exosphere and ionosphere.
What is the exosphere layer?The Exosphere is the topmost layer of the Earth's atmosphere.
and its gradually disappear into the vacuum of space.
It consist two parts that are:
exosphere and ionosphere.
Thus, option "A" is correct, the rest of the option is not a part of thermosphere.
To learn more about atmospheric layers click here:
https://brainly.com/question/25881294
#SPJ2
Answer:
hi hope your doing great the answer is A
Explanation:
its on Edge 2020
hope i helped :)
How many milliliters of 7.10 M hydrobromic acid solution should be used to prepare 5.50 L of 0.400 M HBr
Answer:
310 mL
Explanation:
Step 1: Given data
Initial concentration (C₁): 7.10 MInitial volume (V₁): ?Final concentration (C₂): 0.400 MFinal volume (V₂): 5.50 LStep 2: Calculate the initial volume
We have a concentrated HBr solution and we want to prepare a diluted one. We can do so using the dilution rule.
C₁ × V₁ = C₂ × V₂
V₁ = C₂ × V₂ / C₁
V₁ = 0.400 M × 5.50 L / 7.10 M
V₁ = 0.310 L = 310 mL
Chromium-51 is a radioisotope that is used to assess the lifetime of red blood cells The half-life of chromium-51 is 27.7 days. If you begin with 48.0 mg of this isotope, what mass remains after 47.9 days have passed?
Answer:
After 47.9 days, will remain 14.5mg of the isotope
Explanation:
The radioactive decay follows always first-order kinetics where its general law is:
Ln[A] = -Kt + ln[A]₀
Where [A] is actual concentration of the atom, k is rate constant, t is time and [A]₀ is initial concentration.
We can find rate constant from half-life as follows:
[tex]t_{1/2} = \frac{ln2}{K}[/tex]
K = ln 2 / 27.7 days
K = 0.025 days⁻¹
Replacing, initial amount of isotope is 48.0mg = [A]₀ , K is 0.025 days⁻¹ and t = 47.9 days:
Ln[A] = -Kt + ln[A]₀
Ln[A] = -0.025 days⁻¹*47.9 days + ln (48.0mg)
ln [A] = 2.6726
[A] = e^ (2.6726)
[A] = 14.5mg
After 47.9 days, will remain 14.5mg of the isotope
When scientists are ready to publish the result of their experiments why is it important for them to include a description of the procedure they used
Answer: So other scientist can replicate the experiment and see if they get the same results in other words, test reliability.
Explanation:
When salt is added to water, all of the following happens except? A. The salt breaks into positive chlorine ions and negative sodium icons B. the positive part of the water molecule is attracted to the negative ions C. The negative part of the water molecule is attracted to the positive ions D. The water molecules surround the dissociated ions
Answer:
The salt breaks into positive chlorine ions and negative sodium icons
Explanation:
The question requested for the wrong option in the list. If we look at the option selected, we will notice that sodium ions are positively charged ions since sodium is a metal. Metals produce cations (positive ions) because they loose electrons. Therefore, a sodium ion can never be negatively charged.
Similarly, chlorine is a highly electronegative nonmetal. It gains electrons in an ionic bond. Hence chlorine ions can not be positive.
