Nano mole of hydrogen gas contains.......molecules

Approximately 62.5 g of Thorium-227 will remain un-decayed in 19 days from a 500 g sample of Thorium.

Thorium-227 has a half-life of about 19 days. This means that half of the initial amount of thorium-227 will have decayed in 19 days. Therefore, we can use the formula for exponential decay to calculate how much will remain after 19 days.The formula is:N = N₀ * (1/2)^(t/T).

Where:N is the amount of substance remaining after a certain amount of time (in this case, 19 days)N₀ is the initial amount of the substance (in this case, 500 g)T is the half-life of the substance (in this case, 19 days)t is the amount of time that has passed (in this case, 19 days)So, we can plug in the given values:N = 500 g * (1/2)^(19/19)N = 500 g * (1/2)^1N = 500 g * 0.5N = 250 g.

To know more about Thorium visit:

https://brainly.com/question/14156154

#SPJ11

The percent by mass of  [tex]NaHCO_3[/tex] in the original mixture is approximately 65.99%.

To find the percent by mass of [tex]NaHCO_3[/tex] in the original mixture, we need to calculate the mass of  [tex]NaHCO_3[/tex] in the sample and then determine the percentage.

1. Calculate the moles of [tex]CO_2[/tex] produced:

First, we need to convert the mass of  [tex]CO_2[/tex]  produced (0.561 g) to moles. We'll use the molar mass of  [tex]CO_2[/tex]  to do this.

Molar mass of  [tex]CO_2[/tex]  = 44.01 g/mol

moles of  [tex]CO_2[/tex]  = mass of  [tex]CO_2[/tex]  / molar mass of  [tex]CO_2[/tex]

            = 0.561 g / 44.01 g/mol

            = 0.01274 mol (approximately)

2. Calculate the moles of  [tex]NaHCO_3[/tex]:

Since the balanced chemical equation for the reaction between  [tex]NaHCO_3[/tex] and HA (assuming HA is an acid) is not provided, we can't directly determine the stoichiometry. However, we can use the information given to determine the moles of  [tex]NaHCO_3[/tex] by assuming that all the  [tex]CO_2[/tex]  produced comes from the  [tex]NaHCO_3[/tex].

moles of  [tex]NaHCO_3[/tex] = moles of  [tex]CO_2[/tex]

               = 0.01274 mol (approximately)

3. Calculate the mass of  [tex]NaHCO_3[/tex]:

Now, we can calculate the mass of  [tex]NaHCO_3[/tex] using its molar mass.

Molar mass of  [tex]NaHCO_3[/tex] = 84.01 g/mol

mass of  [tex]NaHCO_3[/tex] = moles of  [tex]NaHCO_3[/tex] × molar mass of  [tex]NaHCO_3[/tex]

              = 0.01274 mol × 84.01 g/mol

              = 1.067 g (approximately)

4. Calculate the percent by mass of  [tex]NaHCO_3[/tex]:

The percent by mass is calculated by dividing the mass of  [tex]NaHCO_3[/tex] by the total mass of the mixture and multiplying by 100.

percent by mass of  [tex]NaHCO_3[/tex] = (mass of  [tex]NaHCO_3[/tex] / total mass of the mixture) × 100

                         = (1.067 g / 1.62 g) × 100

                         = 65.99% (approximately)

Therefore, the percent by mass of  [tex]NaHCO_3[/tex] in the original mixture is approximately 65.99%.

Learn more about moles :

https://brainly.com/question/26416088

#SPJ11

To calculate the percent yield of the anhydrous sodium carbonate, we need to compare the actual yield (3.65 g) to the theoretical yield of anhydrous sodium carbonate that could be obtained from the 10 g sample of washing soda.

First, we need to calculate the molar mass of the hydrated sodium carbonate (Na2CO3 ∙ 10H2O):

Molar mass of Na2CO3 = 2 * atomic mass of Na + atomic mass of C + 3 * atomic mass of O

                  = 2 * 22.99 g/mol + 12.01 g/mol + 3 * 16.00 g/mol

                  = 105.99 g/mol

Next, we calculate the theoretical yield of anhydrous sodium carbonate:

The molar ratio between hydrated sodium carbonate and anhydrous sodium carbonate is 1:1.

Therefore, the moles of anhydrous sodium carbonate obtained from the 10 g sample of washing soda would be:

moles of Na2CO3 = mass of Na2CO3 / molar mass of Na2CO3

              = 3.65 g / 105.99 g/mol

Finally, we can calculate the percent yield:

percent yield = (actual yield / theoretical yield) * 100

            = (3.65 g / (3.65 g / 105.99 g/mol)) * 100

            = (3.65 g / 3.65 g) * (105.99 g/mol) * 100

            = 105.99 g/mol * 100

           ≈ 105.99 %

Therefore, the percent yield of anhydrous sodium carbonate is approximately 105.99%.

To Learn more about anhydrous sodium carbonate. Click this!

brainly.com/question/11431619

#SPJ11

The product of burning differs from the material being burned through a chemical reaction called combustion.

When a material undergoes combustion, it reacts with oxygen in the air and undergoes chemical changes, resulting in the formation of new substances known as combustion products. The nature of the combustion products depends on the specific material being burned. In some cases, the combustion products may include gases such as carbon dioxide, water vapor, nitrogen oxides, and sulfur dioxide. Solid materials, when burned, can produce ashes or residue. The composition and characteristics of the combustion products can vary widely based on the chemical composition of the material, the presence of impurities, and the conditions of combustion such as temperature and oxygen availability.

Learn more about combustion here:

brainly.com/question/31123826

#SPJ11

If a small amount of the hydrate splatters out of the dish during the heating process without being noticed, it will result in a lower mass of the remaining sample. This will affect the calculated value of the percent water by mass.

The percent water by mass is determined by comparing the mass of the water lost during heating to the initial mass of the hydrate. However, if some of the hydrate is lost due to splattering, the initial mass of the hydrate will be overestimated, leading to an inaccurate calculation of the percent water by mass.

The calculated percent water by mass will be lower than the actual value because the lost hydrate was not accounted for in the calculation. The resulting percentage will underestimate the true water content in the hydrate.

To obtain accurate results, it is crucial to ensure that all the hydrate remains in the dish during the heating process, and any loss of sample should be taken into account when calculating the percent water by mass.

To know more about hydrate splatters  click this link -

brainly.com/question/32107405

#SPJ11

You can use the shape of each puzzle piece and the patterns, colors, and designs on each piece to put the puzzle together.

When trying to fit puzzle pieces together, the first step is to identify the edges and corners. Once you have the border pieces in place, you can look at the shapes of the remaining pieces to determine where they fit. You can also look at the patterns, colors, and designs on each piece to help you identify where it fits in the overall picture.

In the given activity, where you cut a page from a magazine into a large irregular shape and exchange it with a partner, the clues to put together your partner’s puzzle may include the shape of each puzzle piece and the patterns, colors, and designs on each piece. The shapes of the pieces will help you determine which piece fits with which other piece, while the patterns and colors will help you determine where each piece fits in the overall puzzle.

Learn more about puzzle here:

https://brainly.com/question/21327199

#SPJ11

The percent yield of Jen's experiment is 100%.

To calculate the percent yield of Jen's experiment, we need to compare the actual yield (the amount of Na2CO3 she collected) to the theoretical yield (the amount of Na2CO3 that should have been produced based on the starting amount of NaHCO3).

The balanced equation for the decomposition of NaHCO3 is:

2 NaHCO3 -> Na2CO3 + H2O + CO2

According to the equation, 2 moles of NaHCO3 should produce 1 mole of Na2CO3. We can use the molar mass of NaHCO3 (84.01 g/mol) and Na2CO3 (105.99 g/mol) to calculate the theoretical yield.

The theoretical yield of Na2CO3 can be calculated as:

Theoretical yield = (mass of NaHCO3) x (1 mol Na2CO3 / 2 mol NaHCO3) x (molar mass of Na2CO3)

Theoretical yield = (2.00 g) x (1 mol Na2CO3 / 2 mol NaHCO3) x (105.99 g/mol Na2CO3)

Theoretical yield = 1.05 g

Since the actual yield is also 1.05 g, the percent yield can be calculated as:

Percent yield = (actual yield / theoretical yield) x 100

Percent yield = (1.05 g / 1.05 g) x 100

Percent yield = 100%

Therefore, the percent yield of Jen's experiment is 100%.

To know more about percent yield click this link -

brainly.com/question/17042787

#SPJ11

The percent by mass of hydrogen in water is approximately 6.743%.Answer: The percent by mass of hydrogen in water is approximately 6.743%.

The mass of a single hydrogen atom is 1.008g and the mass of the compound water is 18.006g.

The mass of hydrogen in water can be determined using the following formula:Mass of Hydrogen in Water = Mass of Hydrogen in one Molecule of Water × Number of Water Molecules present in Water

As a result, we must first compute the mass of hydrogen in one molecule of water. The molecular formula of water is H2O, indicating that one molecule of water contains two hydrogen atoms and one oxygen atom.

Thus, we can calculate the mass of one molecule of water using the atomic masses of hydrogen and oxygen as follows:2 × Atomic Mass of Hydrogen + 1 × Atomic Mass of Oxygen= 2 × 1.008 g/mol + 1 × 15.999 g/mol= 18.015 g/mol

The mass of one molecule of water is 18.015 g/mol. As a result, we can compute the mass of hydrogen in one molecule of water as follows:2 × Atomic Mass of Hydrogen= 2 × 1.008 g/mol= 2.016 g/molThus, the percent by mass of hydrogen in water is:

Mass of Hydrogen in Water = Mass of Hydrogen in one Molecule of Water × Number of Water Molecules present in Water= 2.016 g/mol × 6.022 × 10²³ molecules/mol= 1.215 × 10²³ gPercent by Mass of Hydrogen in Water = (Mass of Hydrogen in Water ÷ Mass of Water) × 100%= (1.215 × 10²³ g ÷ 18.006 g) × 100%= 6.743%

Thus, the percent by mass of hydrogen in water is approximately 6.743%.Answer: The percent by mass of hydrogen in water is approximately 6.743%.

To know more about hydrogen visit:-

https://brainly.com/question/30623765

#SPJ11

When snow on a mountain breaks loose, resulting in an avalanche, several forms of energy are involved in the process. Initially, potential energy is stored in the snowpack due to its elevated position on the mountain slope. This potential energy arises from the gravitational force acting on the snow particles.

As the snow begins to slide downhill, this potential energy is converted into kinetic energy. The force of gravity accelerates the snow particles, increasing their velocity as they descend. This kinetic energy is proportional to the mass of the snow and its velocity.

Additionally, during an avalanche, there can be significant amounts of mechanical energy involved. As the snow slides down the mountain, it interacts with the terrain, breaking apart, colliding with obstacles, and causing frictional forces. These mechanical interactions result in the conversion of kinetic energy into heat and sound energy.

In summary, the energy transformation during an avalanche involves the conversion of potential energy into kinetic energy, as well as the conversion of kinetic energy into heat and sound energy through mechanical interactions. This interplay of various forms of energy contributes to the destructive force and intensity of an avalanche.

To know more about intensity of an avalanche click this link-

https://brainly.com/question/28192597

#SPJ11

The quantity of heat gained by 50 g of iron is 112.5 Joules.

In Mathematics and Science, quantity of heat added to a physical substance can be calculated by using this mathematical equation (formula):

Q = mcθ

Where:

By substituting the given parameters into the formula, we have:

Q = mcθ

Q = 50 × 0.45 × (60 - 10)

Q = 50 × 0.45 × 50

Quantity of heat, Q = 112.5 Joules.

Read more on heat capacity here: brainly.com/question/16559442

#SPJ4

Physical properties refer to the characteristics of a substance that can be observed or measured without undergoing a chemical change. These properties describe the state, appearance, and behavior of matter.

Examples of physical properties include:

Color: The color of an object, such as a red apple or a blue sky.

Density: The mass of a substance per unit volume, such as the density of water or the density of iron.

Melting point: The temperature at which a solid substance changes into a liquid state, like the melting point of ice or the melting point of gold.

Boiling point: The temperature at which a substance changes from a liquid to a gas, such as the boiling point of water or the boiling point of ethanol.

Odor: The smell associated with a substance, like the odor of a rose or the odor of ammonia.

Chemical properties, on the other hand, describe the behavior of a substance when it undergoes a chemical reaction or interaction with other substances. These properties involve the transformation of matter into new substances with different chemical compositions.

Examples of chemical properties include:

Reactivity: The ability of a substance to chemically react with other substances, such as the reactivity of sodium with water to produce sodium hydroxide and hydrogen gas.

Flammability: The tendency of a substance to burn or ignite when exposed to a flame or heat source, like the flammability of gasoline or the flammability of hydrogen.

Stability: The ability of a substance to resist chemical changes or decomposition over time, such as the stability of inert gases like helium or neon.

Acidity/basicity: The chemical property that describes whether a substance is acidic or basic, like the acidity of lemon juice or the basicity of sodium hydroxide.

Oxidation/reduction potential: The tendency of a substance to undergo oxidation or reduction reactions, such as the ability of iron to undergo oxidation and form rust.

The fundamental difference between physical and chemical properties lies in the nature of the change that occurs. Physical properties can be observed or measured without altering the chemical composition of a substance, whereas chemical properties involve the transformation of matter into new substances with different properties. Physical properties are usually reversible changes, while chemical properties involve irreversible changes resulting from chemical reactions.

To know more about Physical properties click this link -

brainly.com/question/18327661

#SPJ11

Folded mountains are commonly found at convergent plate boundaries. These are regions where two tectonic plates are moving towards each other. As the plates collide, they push against each other, causing the formation of mountains, which are often characterized by their folds, faults, and uplifts.

This process is known as orogeny, and it can take place over millions of years. Some of the most famous mountain ranges in the world, such as the Himalayas and the Andes, were formed at convergent plate boundaries.Mountain ranges are important features on the Earth's surface. They play a vital role in determining weather patterns and supporting a diverse array of plant and animal life.

The formation of these mountain ranges is also an important process in the geological history of the planet. In conclusion, folded mountains are formed due to the convergent plate boundaries, which create a lot of geological activity and pressure over a long period.

To know more about tectonic plates visit:-

https://brainly.com/question/16944828

#SPJ11

Covalent bonds are formed by sharing electrons. Covalent compounds are also known as molecular compounds, and they typically have low melting and boiling points. These are some characteristics that can help identify covalent compounds:Electron Sharing: Covalent compounds are formed when two or more atoms share valence electrons with one another.

Atoms with similar electronegativity will tend to share electrons, which leads to the formation of covalent bonds. Covalent bonds can be polar or nonpolar, depending on the difference in electronegativity between the two atoms involved in the bond.Low Melting and Boiling Points: Covalent compounds generally have lower melting and boiling points than ionic compounds. This is because covalent compounds are held together by weak intermolecular forces rather than strong electrostatic forces. This makes them easier to melt or boil.Molecular Shape: Covalent compounds are typically made up of discrete molecules that are held together by covalent bonds. The shape of these molecules is determined by the arrangement of their atoms and the number of lone pairs of electrons around the central atom.Electrical Conductivity: Covalent compounds do not conduct electricity in the solid or liquid state, but they can conduct electricity when dissolved in water or other polar solvents. This is because the water molecules can break apart the covalent bonds and create ions that are able to carry an electric charge.

For more information on Covalent bonds visit:

brainly.com/question/19382448

#SPJ11

To calculate the concentration of acetic acid (vinegar) in the given sample, we can use the concept of titration and the balanced chemical equation for the reaction between acetic acid (CH3COOH) and sodium hydroxide (NaOH):

CH3COOH + NaOH → CH3COONa + H2O

Given:

Volume of sodium hydroxide used (VNaOH) = Final buret reading - Initial buret reading = 43.22 mL - 23.24 mL = 19.98 mL

Volume of acetic acid sample (Vsample) = 5.00 mL

Molarity of sodium hydroxide (MNaOH) = 0.019 M

Using the balanced chemical equation, we can see that the molar ratio between acetic acid and sodium hydroxide is 1:1. Therefore, the moles of sodium hydroxide used will be equal to the moles of acetic acid present in the sample.

1. Calculate the moles of sodium hydroxide used:

Moles of NaOH = Molarity of NaOH * Volume of NaOH used (in liters)

Moles of NaOH = 0.019 M * (19.98 mL / 1000 mL/L)

2. Calculate the moles of acetic acid:

Moles of CH3COOH = Moles of NaOH

3. Calculate the concentration of acetic acid in the sample:

Concentration of CH3COOH = Moles of CH3COOH / Volume of sample (in liters)

Concentration of CH3COOH = Moles of CH3COOH / (5.00 mL / 1000 mL/L)

Calculating the expressions:

Moles of NaOH = 0.019 M * (19.98 mL / 1000 mL/L) = 0.00037962 moles

Moles of CH3COOH = 0.00037962 moles

Concentration of CH3COOH = 0.00037962 moles / (5.00 mL / 1000 mL/L) = 0.075924 M

Therefore, the concentration of acetic acid (vinegar) in the given sample is approximately 0.075924 M.

Learn more about  acid here:

https://brainly.com/question/32540780

#SPJ11

Pulling without specifying how to reconcile divergent branches is equivalent to a regular pull request.

Pulling without specifying how to reconcile divergent branches is similar to a normal pull request. It refers to the act of merging changes from one branch to another. This may result in divergent branches, which means that the branches have changed in separate ways and cannot be merged without human intervention.

Divergent branches can arise when multiple developers work on the same codebase independently, or when a team of developers works on the same codebase at the same time. Reconciling divergent branches requires manual intervention, as there may be conflicts in the code that need to be resolved.

In order to prevent these conflicts, it is best to establish a set of rules or guidelines for collaboration and code review. This can include procedures for code reviews, coding standards, and testing. Additionally, using version control systems like Git and GitHub can help make collaboration more efficient and organized.

Learn more about divergent branches here:

https://brainly.com/question/32007332

#SPJ11

The amount of energy needed to ionize 7.5 mol of sodium is 3720 kJ.

To determine the amount of energy needed to ionize 7.5 mol of sodium, we can use a proportion or dimensional analysis.

According to the given equation, the ionization of 1 mole of sodium requires 496 kJ of energy. Therefore, we can set up a proportion:

496 kJ / 1 mol = x kJ / 7.5 mol

By cross-multiplying and solving for x, we find:

x = 496 kJ * 7.5 mol / 1 mol

= 3720 kJ

Therefore, the amount of energy needed to ionize 7.5 mol of sodium is 3720 kJ.

This calculation shows that for every mole of sodium ionized, 496 kJ of energy is required. By scaling this up to 7.5 mol of sodium, we can determine the total energy needed, which is 3720 kJ.

To learn more about amount of energy, here

https://brainly.com/question/26380678

#SPJ4

In the fluid model of the membrane, phospholipid molecules are oriented so that the head, also known as the polar or hydrophilic region, faces outward towards the aqueous environments, while the tails, also known as the nonpolar or hydrophobic region, face inward and are shielded from the surrounding water.

The head of a phospholipid molecule consists of a phosphate group, which is polar and hydrophilic (water-loving) due to its ability to form hydrogen bonds with water molecules. This makes the head attracted to the aqueous environments found both inside and outside the cell.

On the other hand, the tails of phospholipids are made up of hydrocarbon chains, typically fatty acid chains, which are nonpolar and hydrophobic (water-fearing). These hydrophobic tails repel water molecules and are not soluble in water.

Due to this arrangement, phospholipid molecules spontaneously form a bilayer structure in an aqueous environment, known as the lipid bilayer. The hydrophilic heads face outward towards the watery environments, while the hydrophobic tails cluster together in the interior, creating a barrier that separates the inside and outside of the cell or organelle.

This fluid arrangement of phospholipids allows for the dynamic movement and flexibility of the membrane, enabling processes such as cell membrane fluidity, membrane fusion, and the lateral movement of membrane proteins.

To know more about membrane proteins click this link-

https://brainly.com/question/28871788

#SPJ11

A) To prepare 5.00 L of 0.05 KMnO4 from solid reagent, use the following formula:Mass = Molarity x Molar Mass x VolumeVolume = mass / densityUsing the molar mass of KMnO4 = 158.034 g/mol, we get the mass:Mass = Molarity x Molar Mass x VolumeMass = 0.05 x 158.034 x 5.00Mass = 39.51 gKMnO4's density is 2.70 g/cm3, which means 5.00 L weighs:Weight = 5.00 x 2.70Weight = 13.50 gThe mass required is less than the weight of the solution, so the solid reagent must be added to the solvent in portions until it dissolves completely.B) To prepare 200 mL of 1% (w/v) aqueous CuSO4 from 0.365 M CuSO4 solution, use the following formula:% w/v = (mass of solute / volume of solution) x 100%Using the molar mass of CuSO4 = 159.608 g/mol, we get the mass:mass = Molarity x Molar Mass x Volume (in L)mass = 0.365 x 159.608 x 0.200mass = 11.61 gCuSO4 is dissolved in 200 mL of water and made up to 1 L with water.

As a result, the mass of the solute in the solution is 11.61 g/100 mL.1% (w/v) = (11.61 g / 1000 mL) x 100% = 1.161%Therefore, to obtain a 1% (w/v) aqueous CuSO4 solution, 1.161 g of CuSO4 is dissolved in enough water to make up to 100 mL of solution.C) To prepare 1.50 L of 0.215 M NaOH from a concentrated commercial reagent (5% NaOH (w/w) Sp.gr = 1.526), use the following formula:Mass = Molarity x Molar Mass x VolumeVolume = mass / densityThe concentration of 5% (w/w) NaOH means 5 g of NaOH is present in 100 g of the solution. Assume 1 L of commercial reagent is used. Therefore:mass of NaOH in 1 L of commercial reagent = (5/100) x 1000 = 50 gThe molar mass of NaOH is 40.00 g/mol.Mass = Molarity x Molar Mass x Volume50 g = 0.215 x 40.00 x VolumeVolume = 3.52 LHowever, this is the volume of the solution that contains 50 g of NaOH.

To make 1.50 L of 0.215 M NaOH, the required volume of the commercial reagent is less than 1.50 L. Therefore, to obtain 1.50 L of 0.215 M NaOH, 1 L of commercial reagent is diluted with enough water to make 3.52 L, and then 1.50 L is taken.D) To prepare a 1.5 L solution that is 12.0 ppm in K+, use the following formula:ppm = (mass of solute / mass of solution) x 106ppm = Molarity x Molar Mass x 106The molar mass of K+ is 39.10 g/mol.Molarity = ppm / (Molar Mass x 106)Molarity = 12.0 / (39.10 x 106)Molarity = 3.07 x 10-8 MIn 1.5 L of solution, the number of moles of K+ required is:Moles = Molarity x VolumeMoles = 3.07 x 10-8 x 1.5Moles = 4.61 x 10-8 molesK+ weighs:Molecular Weight = Molar Mass x molesMolecular Weight = 39.10 x 4.61 x 10-8Molecular Weight = 1.80 x 10-6 g Therefore, dissolve 1.80 x 10-6 g K+ in 1.5 L of water to get a solution that is 12.0 ppm in K+.

To know more about solute visit :-

https://brainly.com/question/31545539

#SPJ11

To determine whether the tip of a match undergoing the depicted change represents a physical or chemical change, we can employ the scientific method of making a claim, providing evidence, and offering reasoning.

Claim: The depicted change represents a chemical change.

Evidence:

Before the change: The match tip is composed of a mixture of chemicals, typically including potassium chlorate and sulfur. These chemicals have distinct properties and are capable of undergoing chemical reactions.

After the change: The match tip ignites and produces a flame, accompanied by heat, light, and the release of smoke. The initial match tip is transformed into ashes or residue.

Reasoning:

The production of a flame, heat, light, and smoke indicates a release of energy, which is a characteristic of a chemical change.

The transformation of the initial match tip into ashes or residue suggests that a chemical reaction has occurred, resulting in the formation of new substances with different properties.

Based on the evidence and reasoning, it can be concluded that the depicted change represents a chemical change rather than a physical change.

To know more about  chemical change  click this link-

https://brainly.com/question/23693316

#SPJ11

The number of grams of NaCl necessary to make up 100 mL of a 0.10 M solution is 0.58 g.

Option (a) is correct

To calculate the number of grams of NaCl, we need to use the formula: Mass = Molarity x Volume x Molar mass.

Given that the volume is 100 mL (which is equivalent to 0.1 L) and the molarity is 0.10 M, we can substitute these values into the formula.

The molar mass of NaCl is approximately 58.5 g/mol.

Mass = 0.10 M x 0.1 L x 58.5 g/mol = 0.58 g.

Therefore, the number of grams of NaCl necessary to make up 100 mL of a 0.10 M solution is 0.58 g.

To learn more about Molar mass  here

https://brainly.com/question/12127540

#SPJ4

Determine the number of grams of NaCl necessary to make up 100 mL of a 0. 10 M solution.

a) 0. 58 g

b) 1. 7 g

c) 58 g

d) 0. 017 g.

The maximum amount of NaNO3 that can be produced is equal to the number of moles of NaCl used in the experiment divided by two.

To determine the maximum amount of NaNO3 that was produced during the experiment, the balanced chemical equation and the limiting reactant should be determined.

Here is an explanation to answer your question:

Balance the chemical equation:2 NaCl(aq) + H2SO4(aq) → 2 HCl(g) + Na2SO4(aq)

Sodium chloride reacts with sulfuric acid to produce hydrogen chloride and sodium sulfate. Two moles of NaCl and one mole of H2SO4 are needed to make two moles of HCl and one mole of Na2SO4. This balanced chemical equation is critical to determine the maximum amount of NaNO3 produced.Find the limiting reactant:

The amount of NaNO3 produced in the experiment is determined by the limiting reactant. This is the reactant that runs out first and thus determines the quantity of product generated. The limiting reactant can be determined by comparing the amount of each reactant present in the experiment with the mole ratio in the balanced chemical equation.

Once the amount of NaCl and H2SO4 used in the experiment are determined, they can be converted to moles by dividing by their respective molar masses. The mole ratio of NaCl to NaNO3 in the balanced chemical equation is 2:1. As a result, the maximum amount of NaNO3 that can be produced is equal to the number of moles of NaCl used in the experiment divided by two.

To learn more about moles visit;

https://brainly.com/question/15209553

#SPJ11

The molarity of a solution prepared by dissolving 0.80 g of NaOH in enough water to make 250 mL of solution is 0.2 M.


Mass of NaOH = 0.80 g

Volume of solution = 250 ml

To find the molarity of the solution, we need to know the number of moles of NaOH present in the solution. We can find this using the formula,

Moles of solute (NaOH) = Mass of solute (NaOH) / Molar mass of solute (NaOH)

Molar mass of NaOH = 23 + 16 + 1 = 40 g/mol

Now, substitute the values in the above formula:

Moles of NaOH = 0.80 g / 40 g/mol

Moles of NaOH = 0.02 mol

Molarity of the solution = Moles of solute (NaOH) / Volume of solution in litres

As the volume of solution is given in ml, we need to convert it into litres.

Volume of solution in litres = 250 ml / 1000 ml/L = 0.25 L

Now, substituting the values in the above formula:

Molarity of the solution = 0.02 mol / 0.25 L

Molarity of the solution = 0.2 M

Therefore, the molarity of the solution prepared by dissolving 0.80 g of NaOH in enough water to make 250 mL of solution is 0.2 M.

Learn more about molarity here:

https://brainly.com/question/31545539

#SPJ11

When dilute H₂SO₄ solution is added to K₂CrO₄ solution, the yellow color of the K₂CrO₄ solution will turn orange.

When dilute H₂SO₄ solution is added to K₂CrO₄ solution, the yellow color of the K₂CrO₄ solution will turn orange because the H₂SO₄ solution will protonate the chromate ions (CrO₄²⁻) in the K₂CrO₄ solution, forming dichromate ions (Cr₂O₇²⁻). Dichromate ions are orange in color.

The following chemical reaction occurs:

K₂CrO₄(aq) + H₂SO₄(aq) → K₂SO₄(aq) + Cr₂O₇²⁻(aq) + H₂O(l)

The dichromate ions are more stable than the chromate ions, so this reaction is exothermic. This means that the solution will heat up slightly when the H₂SO₄ solution is added.

Find out more on dilute H2SO4 solution here: https://brainly.com/question/9978245

#SPJ4

Complete question:

What is the observation when dilute H2SO4 solution is added to K2CrO4 solution?

To calculate the full price of the bond with a 7% yield to maturity, we need to consider the timing of the coupon payments and the present value of the future cash flows.

The bond has a face value of $50,000, a term of 20 years, and a coupon rate of 7%. The coupon payments are semi-annual, which means there will be 40 coupon payments over the life of the bond.

To calculate the present value of the coupon payments, we need to discount each payment based on the yield to maturity. Since the yield is 7% and the coupon payments are semi-annual, the yield per period is 3.5%.

Using a financial calculator or formula, we can calculate the present value of an annuity with 40 payments of $1,750 (7% of $50,000) at a discount rate of 3.5%.

Next, we need to calculate the present value of the face value of the bond. Since the bond will be settled on June 30, 2020, there are approximately 3.34 years remaining until maturity. We discount the face value of $50,000 back to the settlement date using the yield to maturity of 7%.

Finally, we sum the present value of the coupon payments and the present value of the face value to get the full price of the bond.

Without specific dates and further details, it's not possible to provide an exact calculation. However, with the given information, you can use the methodology described above to calculate the closest approximation of the full price of the bond.

Learn more about future cash flows here:

https://brainly.com/question/27815828

#SPJ11

If your credit score were 700 instead of 690, your savings would amount to approximately $232.57 over the course of the loan.

The difference in savings arises from the interest rate variations associated with different credit scores. Typically, higher credit scores lead to lower interest rates.

12 months make one year.

5 years is 5 x 12 = 60 months.

When using the APR calculator, a credit score of 700 or better equals 13.25% APR. Total payments over the loan's length equal $10,296.56.

Using the APR calculator, an APR credit score of 699 or below equals 14.25 percent. Total payments during the loan's term equal $10,529.13.

Savings: $10,529.13 - $10,296.56 = 232.57

To know more about credit score here https://brainly.com/question/29548283

#SPJ4

The given question is incomplete, complete question is- "You are in need of a $7,500 loan, which you plan to repay over 5 years. Your credit score is currently 690. Using the rates and the online calculator below, determine how much your savings would be if your credit score were 700 instead of 690."

The conversion factor for converting 2.12 moles of C₃H₈ to molecules is:

1 mole = 6.022×10²³ molecules. Hence, 2.12 moles of C₃H₈ is

From Avogadro's hypothesis, we understood that:

1 mole of substance = 6.02×10²³ molecules

With the above conversion factor, we can easily convert 2.12 moles of C₃H₈ to molecules. Details below:

1 mole of C₃H₈ = 6.022×10²³ molecules

Therefore,

2.12 moles of C₃H₈ = (2.12 moles × 6.022×10²³ molecules) / 1 mole

= 1.28×10²⁴ molecules

Thus, the number of molecules in 2.12 moles of C₃H₈ is 1.28×10²⁴ molecules

Learn more about number of molecules:

https://brainly.com/question/29046368

#SPJ4

The de Broglie wavelength of the fullback is approximately 7.584 × 10^(-28) nanometers.

To determine the de Broglie wavelength of the fullback, we need to convert the speed from miles per hour (mi/hr) to meters per second (m/s) since the de Broglie wavelength equation requires SI units.

1 mile = 1609.34 meters (approximately)

1 hour = 3600 seconds (approximately)

Converting the speed:

19.6 mi/hr * 1609.34 m/mile / 3600 s/hour ≈ 8.749 m/s

Now, we can calculate the de Broglie wavelength using the following equation:

λ = h / p

where λ is the de Broglie wavelength, h is the Planck constant (6.62607015 × 10^(-34) J·s), and p is the momentum.

To calculate the momentum, we need to convert the fullback's weight from pounds (lb) to kilograms (kg) and use the formula:

p = m * v

where m is the mass and v is the velocity.

Converting the weight:

220 lb * 0.453592 kg/lb ≈ 99.7901 kg

Now, we can calculate the momentum:

p = 99.7901 kg * 8.749 m/s ≈ 872.367 kg·m/s

Finally, we can calculate the de Broglie wavelength:

λ = 6.62607015 × 10^(-34) J·s / 872.367 kg·m/s ≈ 7.584 × 10^(-37) meters

To convert the wavelength to nanometers, we multiply by 10^9:

λ = 7.584 × 10^(-37) meters * 10^9 nm/meter ≈ 7.584 × 10^(-28) nanometers

Therefore, the de Broglie wavelength of the fullback is approximately 7.584 × 10^(-28) nanometers.

To know more about de Broglie wavelength click this link -

brainly.com/question/30404168

#SPJ11

The molecular formula of a compound with the empirical formula SO and molecular weight 96.13 is option C, SO2.

The empirical formula of a compound is the formula that shows the smallest whole-number ratio of the atoms in the compound. An empirical formula indicates the relative numbers of atoms of each element in a compound.

Example: If a compound contains 75.5% carbon and 24.5% hydrogen, its empirical formula is CH2. The molecular formula is a multiple of the empirical formula. For example, the molecular formula of acetylene is C2H2. Therefore, the molecular formula is a multiple of the empirical formula. Thus, one can determine the molecular formula if one knows the empirical formula and the molecular weight.

The molecular formula can be determined using the following formula:

Empirical Formula = CH2 Molecular Weight = 96.13

Empirical Formula Weight: H = 2(1.0079)

= 2.0158 g/mol C

= 1(12.0107)

= 12.0107 g/mol

Empirical Formula Weight = 12.0107 + 2.0158

= 14.0265 g/mol

Molecular Weight: SO2 Molecular Weight: S = 1(32.06)

= 32.06 g/mol

O = 2(15.999)

= 31.998 g/mol

Molecular Weight = 32.06 + 31.998

= 64.058 g/mol

n = Molecular Weight/Empirical Formula Weight

n = 64.058/14.0265 = 4.5669 ≈ 5

Therefore, the molecular formula is five times the empirical formula.SO2 (empirical formula: SO)

To learn more about weight visit;

https://brainly.com/question/31659519

#SPJ11

It is important to calculate the average speed of a react cyclist in a race because it helps you evaluate the performance of the cyclist.

The average speed gives you an idea of how fast the cyclist was going during the entire race, which can be compared to previous performances or other cyclists. Additionally, it can be used to track progress and make improvements.

The average speed is a measure of how fast an object is moving over a certain period of time. In the case of a cyclist in a race, the average speed can be calculated by dividing the total distance covered by the cyclist by the total time taken. This will give you an idea of the cyclist's overall performance during the race. It is important to note that the cyclist's speed is unlikely to be constant during the entire race due to various factors such as terrain, weather conditions, and fatigue. The average speed helps to account for these variations and gives a more accurate representation of the cyclist's performance.

To know more about react visit:

https://brainly.com/question/14168723

#SPJ11

The best pair of tools for Silus to use would be an electronic temperature probe and a computer.

Using an electronic temperature probe allows for accurate and precise temperature measurements, which is important for monitoring the reaction. The electronic temperature probe can quickly and continuously measure the temperature at regular intervals.

Pairing the electronic temperature probe with a computer provides several advantages. Silus can connect the temperature probe to the computer, which allows for real-time data acquisition and logging. The computer can record the temperature measurements at the desired intervals of 0.5 seconds and store the data for further analysis.

Additionally, a computer provides the necessary software and tools for graphing the temperature values over time. Silus can use graphing software or spreadsheet programs to plot the temperature data and create a graph. This graph can then be easily inserted into a text document or saved as an image for presentation or analysis purposes.

Therefore, the best pair of tools for Silus to use would be an electronic temperature probe and a computer.

To know more about electronic temperature click this link -

brainly.com/question/29524436

#SPJ11