My QUESTION
A car is travelling 35 miles per hour. How fast is it going when
measured in meters per minute?

Answer:

Ba(OH)2 + 2 HCl → BaCl2 + 2 H2O

The reactants are present in equimolar amounts, so there is no excess or limiting reactants.

(0.0500 L) x (0.600 mol/L HCl) x (2 mol H2O / 2 mol HCl) = 0.0300 mol H2O

(4.184 J/g·°C) x (50.0 g + 50.0 g) x (25.82 - 21.73)°C = 1711.256 J

(1711.256 J) / (0.0300 mol H2O) = 57042 J/mol = 57.0 kJ/mol H2O

Explanation:

Answer:

The answer is D.

Explanation:

Methane (CH4) is a non-polar hydrocarbon molecule made of a single carbon atom and four hydrogen atoms. It is found in nature in the form of natural gas. It is non-polar because the difference in electronegativities between carbon and hydrogen is not sufficient to produce a polarized chemical connection between these two elements.

The methane molecule has a tetrahedral structure in terms of molecular geometry. Because the molecule is not planar, the angles between the H-C-H bonds are 109.5°, which is more than the 90° that they would be if the molecule were planar.

Explanation:

tetrahedral, non polar

This statement lons form because the loss of one or more electrons makes them less stable than their corresponding atoms; this state requires more energy to maintain is FALSE.

So, since the stable octet configuration of the ion requires less energy than the corresponding atom, the statement is false.

So, the statement lons form because the loss of one or more electrons makes them less stable than their corresponding atoms; this state requires more energy to maintain is FALSE.

Learn more about ions here:

https://brainly.com/question/3631272

Answer:

XF3 is our compound. X is unknown For the problem I am using the periodic table at this ...

Explanation:Solution for Element X is an element in period 3. Identify X given that in the molecule XH3, it exhibits hybridization sp2 . Indicate the symbol and not ...

Two or more than two atoms with different physical or chemical properties can not combine together to form an element. The element X  in period 4 with covalency 3 is Arsenic (As).

Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same. The periodic table is divided into groups and periods. depending on the number of valence electrons and the number of outermost orbit respectively.

In the given compound XH[tex]_3[/tex], the covalency of X is 3, means the valence electrons in the outermost shell of element X is 3. The only group that have valence electron 3 is group 15  that is nitrogen family. In the fourth period of group 15 we find Arsenic element.

Therefore the element X  in period 4 with covalency 3 is Arsenic (As).

To know more about element, here:

https://brainly.com/question/8460633

#SPJ2

As electron delocalization stabilizes the compound it is necessary that it takes place for compound to exist , hence the given statement is false.

Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.

Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:

1)Molecular compounds where in atoms are joined by covalent bonds.

2) ionic compounds where atoms are joined by ionic bond.

3)Inter-metallic compounds where atoms are held by metallic bonds

4) co-ordination complexes where atoms are held by co-ordinate bonds.

They have a unique chemical structure held together by chemical bonds .Compounds have different properties as those of elements because when a compound is formed the properties of the substance are totally altered.

Learn more about compounds,here:

https://brainly.com/question/13516179

#SPJ2

Answer:

A mixture of chlorine gas (Cl2) and fluorine gas (F2):

✔ London dispersion forces

Explanation:

The mass of the carbon dioxide that will be produced when 144 g of carbon react with 384 g of oxygen gas is 528 g

We'll begin by calculating the masses of C and O₂ that reacted and the mass of CO₂ produced from the balanced equation.

C + O₂ —> CO₂

Molar mass of C = 12 g/mol

Mass of C from the balanced equation = 1 × 12 = 12 g

Molar mass of O₂ = 2 × 16 = 32 g/mol

Mass of O₂ from the balanced equation = 1 × 32 = 32 g

Molar mass of CO₂ = 12 + (2×16) = 44 g/mol

Mass of CO₂ from the balanced equation = 1 ×44 = 44 g

SUMMARY:

From the balanced equation above,

12 g of C reacted with 32 g of O₂ to produce 44 g of CO₂

From the balanced equation above,

, 12 g of C reacted with 32 g of O₂.

Therefore,

144 g of C will react with = (144 × 32)/12 = 384 g of O₂.

From the calculations made above, we can see that both C and O₂ are sufficient for the reaction. Thus, C and O₂ are both limiting reactants.

From the balanced equation above,

balanced equation above, 12 g of C reacted to produce 44 g of CO₂.

Therefore,

144 g of C will react to produce = (144 × 44)/12 = 528 g of CO₂.

Thus, the mass of CO₂ obtained from the reaction is 528 g

Learn more: https://brainly.com/question/12968502

Answer:

Explanation:

The required pressure can be found by using the formula for Boyle's law which is

[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]

where

P1 is the initial pressure

P2 is the final pressure

V1 is the initial volume

V2 is the final volume

From the question we have

[tex]P_2 = \frac{1 \times 196}{26} = \frac{196}{26} \\ = 7.538461...[/tex]

We have the final answer as

Hope this helps you

Answer: The following information should be included;

What is the difference between the greenhouse effect, climate change and global warming?

What proof do we have that climate change is happening?

Why is it happening?

Waste is removed from the body in various ways. Kidneys filter out metabolic waste, excess fluid and eliminate it in the form of urine. Lungs exhale CO2 from the deoxygenated blood. The undigested solid waste is egested out from the large intestine. Excretion is the process of removing wastes and excess water from the body. It is one of the major ways the body maintains homeostasis. Organs of excretion make up the excretory system. They include the kidneys, large intestine, liver, skin, and lungs.

Answer:i think its d not sure tho

Explanation:

Answer:

Explanation:

Answer:

5.39 X 10-4

Explanation:

Try Checking It Out If It Right Or Not

Answer:It goes through chemical reactions with oxygen, which forms new molecules and provides energy for cells.

Answer:

the answer is B.

Explanation:

your welcome

Answer:

the answer is B

Explanation:

i have the same exact questionn

This problem is describe the mole-ratio composition of an allow composed by tin, lead and cadmium. Ratios are given as Sn:Pb 2.73:1.00 and Pb:Cd is 1.78:1.00, and we are asked to calculate the mass percent compositon of Pb in the allow.

In this case, according to the given information, it turns out possible realize that the following number of moles are present in the alloy, according to the aforementioned ratios:

[tex]2.73mol Sn\\\\1.00molPb\\\\\frac{1.00molPb*1.00molCd}{1.78molPb}= 0.562molCd[/tex]

Next, we calculate the masses by using each metal's atomic mass:

[tex]m_{Sn}=2.73mol*\frac{118.7g}{1mol}=324.05g\\\\ m_{Pb}=1.00mol*\frac{207.2g}{1mol}=207.2g\\\\m_{Cd}=0.562mol*\frac{112.4g}{1mol}=63.2g[/tex]

Thus, the mass percent composition of each metal is shown below:

[tex]\%Sn=\frac{324.05g}{324.05g+207.2g+63.2g} *100\%=54.5\%\\\\\%Pb=\frac{207.2g}{324.05g+207.2g+63.2g} *100\%=34.9\%\\\\\%Cd=\frac{63.2}{324.05g+207.2g+63.2g} *100\%=10.6\%[/tex]

So that of lead is 34.9 %.

Learn more:

Answer:

0.86

Explanation:

1mol of Zn has mass of 65.39g.The amount of Zn is 2.5g65.39g/mol=0.038mol.

The amount of H2 produced is the same as the amount of Zn consumed (0.038mol).

1mol of ideal gas will occupy 22.4L at STP.

The H2 will occupy 0.038mol×22.4L/mol=0.86L

.

The biological Oxygen demand of the lake is increased by 1.5 ton.

Discussion:

The reaction of methanol with Oxygen is as follows;

In the reaction above; Since Methanol, CH3OH and Oxygen, O2 have the same molar mass; 32.

Therefore we can say since;

2 moles of CH3OH requires 3 moles of O2.

Therefore, 1 ton of methanol will require 1.5 ton of oxygen.

The biological Oxygen demand of the water is therefore increased by 1.5 ton as this is the amount of Oxygen consumed by the ethanol.

Read more:

https://brainly.com/question/13386150

Answer:The plates are not fixed but are constantly moving atop a layer of solid and molten rock called the mantle. The Ring of Fire is a string of volcanoes and sites of seismic activity, or earthquakes, around the edges of the Pacific Ocean. ... A hotspot is a place in the middle of a tectonic plate where hot magma rises.

Explanation:

Answer:

NaHCO3

Explanation:

The three is small at the bottom at the end

Answer:

1. An independent variable is manipulated, or changed. The dependent, or responding variable, changes based on the independent variable. The dependent variable is examined.

2. It is a controlled experiment.

Explanation:

In a controlled experiment all variables are kept the same, except for the one being tested, which is called the experimental variable , or independent variable . This group is the experimental group . The group that is not affected by the experimental variable is the control group .

Very often a graph will be used to analyze the results of the experiment. The independent/experimental variable is placed on the x-axis and the dependent variable is placed on the y-axis. The dependent variable is what is measured as a result of the application of the experimental variable.

A variable that is independent is altered. Based on the independent variable, the responding variable, or dependent variable, alters. Examining the dependent variable. The experiment is carefully controlled.

In mathematical modeling, statistical modeling, and experimental sciences, there are dependent and independent variables. Dependent variables get their name because, during an experiment, their values are investigated under the presumption or requirement that they are dependent on the values of other variables due to some law or rule.

A variable that is independent is precisely what it sounds like. It is a stand-alone variable that is unaffected by the other variables you are attempting to assess. Age, for instance, could be an independent variable.

When doing an experiment, the independent variable is what you alter, and the dependent variable is what changes as a result of that change. This is an easy way to conceive of independent and dependent variables.

Thus, based on the independent variable, the responding variable, or dependent variable, alters.

To learn more about independent variable, follow the link;

https://brainly.com/question/967776

#SPJ2

Answer:

dog dog im not gon hold u we kinda screwed

Taking into account the definition of pH and pOH, the [H⁺] is 3.16×10⁻⁵ M and the solution will be acid.

First of all, pH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.

The pH is defined as the negative base 10 logarithm of the activity of hydrogen ions, that is, the concentration of hydrogen ions or H₃O⁺:

pH= - log [H⁺]= - log [H₃O⁺]

Similarly, pOH is a measure of hydroxyl ions in a solution and is expressed as the logarithm of the concentration of OH⁻ ions, with the sign changed:

pOH= - log [OH⁻]

The following relationship can be established between pH and pOH:

pH + pOH= 14

In this case, being pOH= 9.50, pH is calculated as:

pH + 9.40= 14

pH= 14 - 9.50

pH= 4.50

Replacing in the definition of pH the concentration of H⁺ ions is obtained:

- log [H⁺]= 4.50

Solving :

[H⁺]= 10⁻⁴ ⁵

[H⁺]= 3.16×10⁻⁵ M

The numerical scale that measures the pH of the substances includes the numbers from 0 to 14, being acidic solutions with a pH lower than 7, and basic those with a pH greater than 7. The pH = 7 indicates the neutrality of the solution.

In this case, the pH has a value of 4.50. So, the solution is acidic.

In summary, the [H⁺] is 3.16×10⁻⁵ M and the solution will be acid.  

Learn more:

Yes according to reliable sources.

Answer:

The key to understanding why ionic and covalent compounds have different properties from each other is understanding what's going on with the electrons in a compound. Ionic bonds form when atoms have different electronegativity values from each other. When the electronegativity values are comparable, covalent bonds form.

But, what does this mean? Electronegativity is a measure of how easily an atom attracts bonding electrons. If two atoms attract electrons more or less equally, they share the electrons. Sharing electrons results in less polarity or inequality of charge distribution. In contrast, if one atom attracts bonding electrons more strongly than the other, the bond is polar.

Ionic compounds dissolve in polar solvents (like water), stack neatly on each other to form crystals, and require a lot of energy for their chemical bonds to break. Covalent compounds can be either polar or nonpolar, but they contain weaker bonds than ionic compounds because they are sharing electrons. So, their melting and boiling points are lower and they are softer.

I hope this helps have a great day :)

Answer:

Explanation:

It''s chemical formula is Na3PO4

This  problem provides the molar mass and radius of a metal that has an FCC unit cell and the density is required.

Firstly, we begin with the formula that relates the aforementioned variables and also includes the Avogadro's number and the volume of the unit cell:

[tex]\rho=\frac{Z*M}{V*N_A}[/tex]

Whereas Z stands for the number of atoms in the unit cell, M the molar mass, V the volume and NA the Avogadro's number. Next, since FFC is able to hold 4 atoms and M and NA are given. Next, we calculate the volume of the atom in the unit given the radius in meters:

[tex]V=a^3=(2*1.92x10^-10m*\sqrt{2} )^3=1.60x10^{-28}m^3/atom[/tex]

And finally the required density in g/cm³:

[tex]\rho=\frac{4*241.5g/mol}{1.60x10^{-28}m^3/atom*6.022x10^{23}atom/mol} \\\\\rho=10025739g/m^3=10.03 g/cm^3[/tex]

Learn more:

Since gas molecules average velocity depends on temperature, oxygen molecules at 25°C are moving faster than oxygen molecules at 0 °C.

According to the kinetic theory of gases, the molecules of a gas are in constant random motion and collide frequently with each other and the walls of the container.

The average speed of gas molecules depends on temperature and molar mass as shown by the relation;

vrms = √3RT/M

The following statement are true among the options provided;

The following are false among the options provided;

Learn more: https://brainly.com/question/6505878

Explanation:

[tex]\tiny\implies Molarity = \dfrac{no. \: of \: moles \: of \: solute \times 1000}{volume \: of \: the \: solution \: (in \: ml)} [/tex]

[tex]\tiny\implies 0.50 = \dfrac{no. \: of \: moles \: of \: solute \times 1000}{15}[/tex]

[tex]\tiny\implies no. \: of \: moles \: of \: solute \times 1000 = 0.50 \times 15[/tex]

[tex]\tiny\implies no. \: of \: moles \: of \: solute \times 1000 = 7.5[/tex]

[tex]\tiny\implies no. \: of \: moles \: of \: solute = \dfrac{7.5}{1000} [/tex]

[tex]\tiny\implies \bf no. \: of \: moles \: of \: solute = 0.075 \: mol[/tex]