my answer was 10 and it’s telling me it’s wrong..what did i do wrong?

Answer: That results in a different ALTERNATE pathway which has a LOWER ACTIVATION ENERGY.

Explanation:

There are many factors that affects a chemical reaction, these include'

--> surface area

--> concentration,

--> temperature,

--> pressure and

--> presence of CATALYST.

A CATALYST is defined as the substance that has the ability to alter the rate of a chemical reaction. Many reaction very slowly when left alone, but become faster when other substances are added. Such substances that merely alter the rate of reactions but do not take part in the reactions are called CATALYSTS.

Activation energy is defined as the energy barrier that must be overcome before a reaction takes place. A catalyst is able to increase the rate of a chemical reaction by decreasing the activation energy of the chemical system.

A catalyst provides an ALTERNATE PATHWAY for the reaction that has a LOWER ACTIVATION ENERGY. When activation energy is lower, more reactant particles have enough energy to react, so the reaction occurs faster.

c) Current cannot flow

Reason: Because the switch is not closed.

Answer:

current can't flow

Explanation:

by the way of explanation it is open circuit in which the current flow whereas in closed circuit the current flow.

if you like my answer please mark as brainlist.

it will be too much help for me.

Answer:

A

Explanation:

because B is wrong as it doesn't have the same mass number. C is wrong as it has different number of neutrons. D is wrong as it has more neutrons than protons.

as+at+room+temperature+and+pressure

Calculate the volume of 150kg of chlorine gas at room ... Calculate the volume of 150kg of chlorine gas at room temperature and pressure. The volume of one mole of gas at room temperature and pressure is 24.0dm^3. Relative formula mass

Answer:

[tex]{ \tt{at \: \: s.t.p : }} \\ { \bf{0.0355 \: kg \: of \: chlorine \: occupies \: 22.4 \: {dm}^{3} }} \\ { \bf{150 \: kg \: will \: occupy \: ( \frac{150 \times 22.4}{0.0355} )}} \: dm {}^{3} \\ \\ { \tt{ volume = 94647.88 \: {dm}^{3} }}[/tex]

Answer:

frick u beotch

Explanation:

Answer:

957.7mL

Explanation:

Using the formula below;

CaVa = CbVb

Where;

Ca = concentration of acid (M)

Va = volume of acid (mL)

Cb = concentration of base (M)

Vb = volume of base (mL)

According to the information provided in this question:

Ca = 0.166 M

Cb = 0.013 M

Va = 75mL

Vb = ?

Using CaVa = CbVb

0.166 × 75 = 0.013 × Vb

12.45 = 0.013Vb

Vb =12.45/0.013

Vb = 957.7mL

Explanation:

Given :

Amount of solute - sucrose (C12H22O11) = 41 g

Amount of solvent -soda  = 355-mL

Molarity of the solution with respect to sucrose= ?

Molarity(M) is a unit of concentration measuring the number of moles of a solute per liter of solution. The SI unit of molarity is mol/L.

Formula to find the molarity of solution :

               Molarity =  

Amount of solvent is given in mL, let’s convert to L :

               1 L = 1000 mL

Therefore, 355 mL in L will be :

               = 0.355 L

We have the amount of solute in g, let’s calculate the number of moles first :

       Number of moles (n) =  

Molar mass of C12H22O11 = 342.29 g/mol.

Therefore, n =  

               = 0.119 moles.

Answer:

Transparency to visible light and microwaves. Very good resistance to ageing, wear and heat. Lightweight, impact and shatter resistant. Good gas and moisture barrier properties

Explanation:

Answer:

Your Welcome! :)

Explanation:

What are the Characteristics of Polyethylene terephthalate (PETE or PET)?

Chemical Resistance: PET does not react with water or food which is one of the reasons it is used for consumable packaging.

Strength to Weight Ratio: PET is very strong for its lightweight.

Shatterproof: PET will not break or fracture.

Explanation:

A B C D isme koyi ans hain doond lo

Explanation:

Whether you choose to use van der Waals radii or metallic radii as a measure of the atomic radius, for metals the ionic radius is smaller than either, so the problem doesn't exist to the same extent. It is true that the ionic radius of a metal is less than its atomic radius (however vague you are about defining this).

Whether you choose to use van der Waals radii or metallic radii as a measure of the atomic radius, for metals the ionic radius is smaller than either, so the problem doesn’t exist to the same extent. It is true that the ionic radius of a metal is less than its atomic radius (however vague you are about defining this).

HOPE SO IT HELPS YOU

Answer:

Elements that have atomic numbers from 20 to 83 are heavy elements, therefore the ratio is different. The ratio is 1.5:1, the reason for this difference is because of the repulsive force between protons: the stronger the repulsion force, the more neutrons are needed to stabilize the nuclei.

Answer:

D. The energy in light waves comes in units called photons.

Explanation:

its known as quatum theory

Answer:

4084.808 grams (SigFigs: 4085 grams)

Explanation:

The molar mass of Iron fluoride is 112.84 g/mol.

To calculate the mass, multiply the molar mass by the number of moles.

36.2 mol * 112.84 g/mol = 4084.808 g

Convert to Sigfigs (if necessary):

4085 g

Answer:

The person above is correct

Explanation:

Answer:

2SO2 + O2 → 2SO3

Explanation:

According to this question, sulphur dioxide (SO2) reacts with oxygen to produce sulphur trioxide (SO3). The equation is as follows:

SO2 + O2 → SO3

The above equation is unbalanced because there are unequal number of atoms of each element in the both reactants and products. To balance the equation, we use coefficients to make the number of atoms equal. The balanced equation is as follows:

2SO2 + O2 → 2SO3

- There are 2 moles of S on both sides of the equation.

- There are 4 moles of Oxygen on both sides of the equation.

Answer: The number of moles of NaOH is 0.0036 moles

Explanation:

Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L. The formula used to calculate molarity:

[tex]\text{Molarity of solution}=\frac{\text{Moles of solute}\times 1000}{ \text{Volume of solution (mL)}}[/tex] .....(1)

Given values:

Molarity of NaOH = [tex]0.1mol/dm^3=0.1mol/L[/tex]         (Conversion factor: [tex]1L=1dm^3[/tex]

Volume of the solution = [tex]36cm^3=36 mL[/tex]             (Conversion factor: [tex]1mL=1cm^3[/tex]

Putting values in equation 1, we get:

[tex]0.1=\frac{\text{Moles of NaOH}\times 1000}{36}\\\\\text{Moles of NaOH}=\frac{0.1\times 36}{1000}=0.0036mol[/tex]

Hence, the number of moles of NaOH is 0.0036 moles

The question is incomplete, the complete question is:

Standardization of a Borax solution (Na2B4O7). A student titrates a 20.00 mL sample of an aqueous borax solution with 1.044 M H2SO4. It takes 2.63 mL of acid to reach the equivalence point. Knowing it takes 1 H2SO4 to neutralize 2 Na2B4O7, what was the concentration of this Borax solution?

Answer: The concentration of borax solution is 0.069 M.

Explanation:

To calculate the concentration of borax solution, the formula used is:

[tex]n_1C_1V_1=n_2C_2V_2[/tex] ....(1)

where,

[tex]n_1, C_1\text{ and }V_1[/tex] are the n-factor, concentration and volume of sulfuric acid

[tex]n_2,C_2\text{ and }V_2[/tex] are the n-factor, concentration and volume of borax solution.

We are given:

[tex]n_1=1\\C_1=1.044M\\V_1=2.63mL\\n_2=2\\C_2=?M\\V_2=20mL[/tex]

Putting values in equation 1, we get:

[tex]1\times 1.044\times 2.63=2\times C_2\times 20\\\\C_2=\frac{1\times 1.044\times 2.63}{2\times 20}\\\\C_2=0.069M[/tex]

Hence, the concentration of borax solution is 0.069 M.

Answer:

molecules

Explanation:

they are molecule

Answer:

A heatwave occurs when a system of high atmospheric pressure moves into an area and lasts two or more days.

Explanation:

In such a high-pressure system, air from upper levels of our atmosphere is pulled toward the ground, where it becomes compressed and increases in temperature.

Answer:

A: Gamma

Gamma rays have enough energy to kill bacteria

Answer:

University of University of South New York Jersey has is a the best in the world the most important most important aspect of aspect of life is life and marriage is in my a lot more of a urban

Answer: The rate of diffusion of methane is 100 cc.

Explanation:

Graham's law states that the rate of diffusion of a gas is inversely proportional to the square root of the molar mass of the gas. The equation for this follows:

[tex]\text{Rate}=\frac{1}{\sqrt{M}}[/tex]       .....(1)

where M is the molar mass of the gas

We are given:

[tex]Rate_{X}=50cc[/tex]

[tex]M_{X}=4\times M_{CH_4}[/tex]

Since the molar mass of methane = 16 g/mol

Using equation 1:

[tex]\frac{Rate_{CH_4}}{Rate_{X}}=\sqrt{\frac{M_X}{M_{CH_4}}}[/tex]

Putting values in above equation, we get:

[tex]\frac{Rate_{CH_4}}{50cc}=\sqrt{\frac{(4\times 16)}{16}}\\\\Rate_{CH_4}=50\times \sqrt{4}\\\\Rate_{CH_4}=50times 2=100cc[/tex]

Hence, the rate of diffusion of methane is 100 cc.

Answer:

Atomic number = 25 protons

Mass number = ( 25 + 30 ) = 55

Answer:

Ozon prevents us from UV rays of the sun. Ozone hole means that UV rays are entering the Earth. This results in cancer.

Explanation:

Chlorofluorocarbons are causing this

Answer:

The term ‘ozone hole’ refers to the depletion of the protective ozone layer in the upper atmosphere (stratosphere) over Earth's polar regions. People, plants, and animals living under the ozone hole are harmed by the solar radiation now reaching the Earth's surface—where it causes health problems, from eye damage to skin cancer.

Ozone depletion occurs when chlorofluorocarbons (CFCs) and halons—gases formerly found in aerosol spray cans and refrigerants—are released into the atmosphere.

(i) Liang - liang stoma lebih banyak di bahagian bawah daun berbanding di bahagian atas permukaan daun.

(ii) Struktur X berfungsi mangawal pembukaan dan penutupan liang stoma

Answer:

C

Explanation:

In thermodynamics, a exothermic system looses heat to the surroundings while an endothermic system absorbs heat from the surroundings.

A system is a part the universe marked off by a specified boundary. The contents of the cup constitutes the system in this case.

The region of space outside the system is called the surroundings. Hence everything outside the cup constitutes the surroundings.

Answer:

12:35

Try it this way. egst11245

Answer:

A is mixture

B and C are compund

D and E are elements

F is also mixture

Answer:

Malleability describes the property of a metal's ability to be distorted below compression. It is a physical property of metals by which they can be hammered, shaped and rolled into a very thin sheet without rupturing. A malleable fabric could be planate by blow or rolling.

Explanation:

Ductility is the property of a solid, like a metal, to deform under a tensile stress (force). So if you pull on two ends of a metal wire or bar, and it “stretches” you have a ductile substance. Though I must caution that you don't confuse the definition of ductile to mean elastic. They are not synonyms. It is the opposite of brittle. When a ductile item breaks, it is after necking, where the diameter of the wire in question reduces as the length elongated. A brittle, or non-ductile material simple tears apart in a sharp and quick fashion with little to no visible necking taking place.

sonorous: producing sound (as when struck)

Answer:

+1/2

Explanation:

spin up is always +1/2

Answer:

6.25mol

Explanation:

Using the following formula;

Mole = mass ÷ molar mass

According to this question, there are 100 grams of methane (CH4)

Molar Mass of methane (CH4) = 12 + 1(4)

= 12 + 4

= 16g/mol

mole = 100/16

mole = 6.25moles

Therefore, there are 6.25moles of methane in 100g