Multiple Choice Questions 1. Which of the following statement best describes an atom? A. Protons and electrons are grouped together in a random pattern. B. Protons and electrons are grouped together in an alternating pattern C. A core of protons and neutrons surrounded by electrons. D. A core of electrons and neutrons surrounded by protons. 2. Table 5.10 shows the atomic mass of four stable isotopes of an element X. 119
Answers
Answer:
C is Correct
Explanation:
Protons and Neutrons make up the Nucleus while Electrons surround the nucleus in circular orbits with continuous rotation.
Related Questions
I need help on this, It’s due today. Please, anybody
Answers
Answer:
1 = 252g, 2 = 2mL, 3 = 1.5mL, 4 = 3g, 5 = 225g, 6 = 0.92g/mL, 7 = 0.75g/mL, 8 = 0.71g/mL, 9 = 1.9mL, 10= 1.11mL, 11 = 76.9g
Explanation:
This problem is testing how well you can move around the equation D = m/v where D = Density (g/mL), m= mass of sample (g), v = volume of sample (mL).
What is the Color of trioxonitrate(v)
Answers
Answer:
it's yellowish in color plz Mark me as brainliest
Answer:
It's a yellowish color like copper
Balancing oxidation-reduction reactions
Mg+ N2—>Mg3N2
Answers
Answer:
[tex]{ \sf{3Mg_{(s)} + N_{2(g)} →Mg _{3}N_{2(s)}}}[/tex]
Which is larger?
1). 1 liter or 1500 milliliters
2) 12 cm or 12 milliliters
Answers
Answer:
1). 1 litre
2).12 cm
Explanation:
In 1 litre = 1000 ml whereas 1500 milliliters equals 0.15 litres and it is same for 12 cm and 12 milliliters
MAY SOMEONE HELP ME PLZZ
A tire company wants to determine what kind of rubber will last the longest for their tires. What are some variables that the researchers will want to make controlled variables?
Answers
Answer: Rubber source, temperature, thinkness, thread design, driving pattenrs, weather, etc.
Explanation: There are many variables. Here are a few I would include in a tire lifetime study:
1. Type of rubber, including source
2. Thickness of tire
3. Design of tire thread
4. Life as a function of average speed and road surface
5. Expected outside temperature and wet conditions
6. Driving conditions of speed and both acceleration and deceleration parameters (e.g., tire life when slamming on the brakes or accelerating quickly)
What should a prepositional phrase include after the preposition?
A.a noun and its modifiers
B.an adjective and an adverb
C.a subject and a predicate
D.an object and its modifiers
Answers
Answer:
B
Explanation:
A prepositional phrase should include after the preposition an object and its modifiers. The correct option is D.
What are prepositional phrases?A prepositional phrase is a group of words that contain a preposition with its object and the words that modify it. These are the words that change verbs and nouns.
For example, Mansi is going out with handsome Brian. Brian is the object and the beautiful is the prepositional phrase. The three types of prepositional phrases are:
Adverb prepositional phrases.Adjective prepositional phrases.Prepositional phrases, behave as nouns.If there are two prepositional phrases used in one sentence. The other prepositional phrase will be used as an adverb.
Thus, the correct option is D. an object and its modifiers.
To learn more about prepositional phrases, refer to the link:
https://brainly.com/question/17542837
#SPJ6
As a professor Daniel must complete a research project each year in order to
stay on staff. Daniel is an engineer and has to deal with many complicated
mathematical calculations. Knowing this fact Daniel would most likely concern
himself with qualitative research,
Answers
Explanation:
Add our site sources in order to be advantage of knowledge
A car start from rest and covers distance of 100m after 10seconds.if the acceleration is 2m/s square, calculate the final velocity..
Answers
Answer:
20 m/s
Explanation:
solution,
initial velocity (u)=0 m/s
Distance covered(s)=100m
Time taken(t)=10 seconds
Acceleration (a)=2m/s²
Now,
By using first equation of motion, we have
v=u+at
=0+2×10
=20 m/s
I hope it helped U
stay safe stay happy
5. What is common among the following phenomena?
* Blinking of traffic light
* Rotation of blades of fan
* Swinging of pendulum of a clock
a) All are chemical changes
b) All are periodic changes
c) All are undesirable changes
d) All are irreversible changes
Answers
Answer:
All are periodic changes
[And is that a todoroki pfp, I like MHA too
(・∀・) ]
3. Take vinegar, lemon juice, tap water in three separate glass beakers. Put chalk piece,pin, egg shell, leaves in three beakers. Note your observations how test the gas evolved in it.
Answers
Answer:
This process is know as Chromotography
Explanation:
give any two reasons that hydrogen is kept in group 1 in Modern Periodic Table
Answers
Answer:
Hydrogen is usually classified as a group 1 element since it has one valence electron, just like group 1 metals.
Explanation:
What would the car weigh on Earth with a gravitational pull of 9.8 N/kg?
Answers
Answer:
Explanation:s the gravitational field strength on Earth's 9.8 N kg?
The gravitational field strength of the Earth is 10 N/kg (10 newtons per kilogram).
What is the function of phloem tissue in the plant transport system?
A.it prepares food
B.it transports food
C.it transports water
D.it provides support
Answers
Answer:
option B is the right answer it helps in transfer of food.
1. Based on the Law of Conservation of Mass, if
100g of sodium metal reacts with 25g of
chlorine gas, what will be the total mass of the
product, sodium chloride, created in the
chemical reaction?
2 Na Cl2
2NaCl
100gm + 25gm
+
?
Answers
[tex]\boxed{\sf {Na\atop Sodium}+{Cl\atop Chlorine}\longrightarrow {NaCl\atop Sodium Chloride}}[/tex]
Na=100gCl=25g.Mass of reactants :-[tex]\\ \sf\longmapsto Na+Cl[/tex]
[tex]\\ \sf\longmapsto 100+25[/tex]
[tex]\\ \sf\longmapsto 125g[/tex]
Mass of NaCl=125g
what will happen to the atoms or sbstance when it is condenses
Answers
Answer:
Hey mate.....
Explanation:
This is ur answer.....
Condensation happens when molecules in a gas cool down. As the molecules lose heat, they lose energy and slow down. They move closer to other gas molecules. Finally these molecules collect together to form a liquid.
Hope it helps!
Brainliest pls!
Follow me! :)
What is the density of water (in g/mL) to fouf significant figures at 6°C?
Answers
Answer :
0.9999432 g/cm^3
The density of water in g/ml up to 4 significant figures at 6°C is 0.9999432 g/cm³.
What are significant figures?Significant figures are used for establishment of a number which is presented in the form of digits. These digits give a meaningful representation to the numbers.
The significant figures are the significant digits which convey the meaning according to the accuracy. These provide precision to the numbers and hence are called as significant numbers.There are rules for counting significant figures which are as follows:
1)All non-zero digits are significant .
2)All zeroes which occur between non-zero digits are significant.
3)All zeroes to the left and right of a non-zero digit are not significant.
4) All zeroes on right of decimal are significant if a non-zero number follows them.
5)All zeroes on right side of non-zero digit are significant
Learn more about significant figures,here:
https://brainly.com/question/29153641
#SPJ2
during the interconversion of state of matter, mass undergoes and change? true or false
Answers
True.
The Mass Undergoes change only in ( Solid state to liquid state ) Ice Cube to Water .
Mass changes from mg to litre.
[tex]\huge\mathfrak\red{hope \: it \: helps}[/tex]
Why does the author include information about bread and sandwich wrappings in the article?
(A) to show that the scientific method is often used to understand things about food
(B) to provide an example of something that can be tested by the scientific method
(C) to demonstrate the problems that can be caused by improper seals and wrappings
(D) to help evaluate how the weight of bread can show how much moisture it has
Answers
Answer:
what is the story about actually.i think it's from ur lesson
Explanation:
certain breads mold easily...(fact)..
especially white bread., when exposed to any moisture, from refrigeration, or freezing..
when taken out of (cold environment), humidity in air causes molding because you take it from cold to/warm environment.
check expiration dates, keep refrigerated, and inspect 4 molding. Companies like WMART, buy in bulk, when on shelf, defrosts,, then has molding within expiration dates..
what amount (in moles) is present in 2.0g of sodium hydroxide,NaOH
Answers
Answer: 0.050 moles of NaOH
Explanation: The molar mass of NaOH is 40.0g/mole
2.0g/40.0g/mole = 0.050 moles (2 sig fig)
GIVING 20 POINTS!! Apply Concepts Two chemists each plan an investigation in which they will combine hydrogen gas with chlorine gas to observe the chemical reactivity. The plans differ in that one will use 25 milligrams each of hydrogen and chlorine, and the other will use 1000 times this amount, i.e., 25 grams each of hydrogen and chlorine. Can the investigations reach similar conclusions about the reactivity of hydrogen with chlorine? Explain.
Answers
Answer:
Yes, the investigations will reach similar conclusions about the reactivity of H2 and Cl2
Explanation:
1. The law of multiple proportions says that when elements form compounds, the proportions of the elements in those chemical compounds can be expressed in small whole number ratios. This means that regardless of whether 1000 times more of the products are used, the reactivity of the products is established by the chemical reaction
2. The law of multiple proportions is an extension of the law of definite composition, which states that compounds will consist of defined ratios of elements.
3. A reaction with more reactants will need more care because more products are produced, which can be toxic
4. H2 and Cl2 reactivity does not depend on the quantities but the chemical properties of each compound
A dehydration reaction (or condensation reaction) is the process in which _____. See Concept 5.1 (Page) View Available Hint(s)for Part A water molecules are produced as a polymer is formed from monomers the bonds between the individual monomers of a polymer are broken by the addition of water molecules water molecules are attracted to each other water molecules are used as a source of raw material to break down polymers to monomers None of the choices is correct.
Answers
A dehydration reaction (or condensation reaction) is the process in which water molecules are produced as a polymer is formed from monomers.
A chemical reaction is the process by which substances called reactants are transformed to another substance known as products through the breaking up or building up of bonds between the reactants.
There are different types of chemicals reaction which includes condensation reaction.
Condensation reaction involves the combination of two smaller molecules known as monomers to for one larger molecule known as polymer with the loss of water molecule.
Condensation reaction is specifically called dehydration reaction due to the loss of water molecule that is involved.
Therefore, a dehydration reaction (or condensation reaction) is the process in which water molecules are produced as a polymer is formed from monomers.
Learn more here:
https://brainly.com/question/20300284
Which describes a relationship when calculating the energy of a photon? The energy of the photon is directly proportional to frequency. The energy of the photon is inversely proportional to frequency. As the energy of the photon increases, Planck’s constant increases. As the energy of the photon increases, Planck’s constant decreases.
Answers
Answer:
The photon is directly proportional to frquency
Explanation:
E=hf
where E is energy
h is plancks constant and
f is frequency
Answer:
A
Explanation:
Edge 2022
what is electron configuration?
Answers
Answer:
electron configuration is the distribution of electrons of an atom or molecule in atomic or molecular orbitals.
Measurements of the heights of various plants in an experiment are called
Answers
Answer:
Option 1 Data
Answer:
data
Explanation:
that is the answer
please 5 stars
Convert to standard notation.
9.3 x 10^-5
Answers
Answer:
9.3 x 10^ -5 in standard notation is 0.000093
Explanation:
Since 10 is raised to a -5, this means that there should be 5 zeros before the non-zero digits
What are two factors that can change the rate of a chemical?
Answers
Answer:
the surface area of a solid reactant.
temperature.
presence/absence of a catalyst.
The strength of van der Waals forces increases as:
A. molecular size decreases
B. molecular size increases
C. number of electrons increases
D. number of electrons decreases
Answers
Answer:
B and C
Explanation:
is it multiple choice question??
Van der Waals forces are the interaction between the molecules and the atoms. It increases with an increase in the molecular size and the number of electrons. Thus, options B and C are correct.
What are Van der Waals force?
Van der Waals forces are the weak forces of attraction and repulsion present between the atoms and the molecules of the compounds. They are also called London Dispersion Forces and dipole-dipole forces.
An increase in the number of electrons and size of the molecule increases the surface area and the electron cloud which in turn, increases the Van der Waals force.
The intermolecular force increases as in large atoms or molecules the valence are held loosely as they are far from the nucleus or the center of the atom.
Therefore, the size and the electron increase the Van der Waals force.
Learn more about Van der Waals force here:
https://brainly.com/question/11457190
#SPJ5
Distillation can be separated in what technique?
A. Chemical
B. Physical
Answers
Answer:
B. Physical process is the way distillation can be separated.
A. Identify the type of molecule shown in the drawing. (2 points)
Answers
Answer: 1) Caboxylic acid
2) Ether
3) Ester
4) Aldehyde
5) Amine
6) Alcohol
Explanation: The type of a molecule is based it's primary functional group.
https://en.wikipedia.org/wiki/Functional_group
The identities of the given molecules shown in the drawing are:
1) Carboxylic acid.
2) Ether
3) Ester
4) Ethane
5) Aldehyde
6) Amine
7) Alcohol
What are the organic compounds?Organic compounds are those compounds, which contain carbon-carbon and carbon-hydrogen bonds.
The five organic compounds are lipids, carbohydrates, protein, nucleotide, etc.
Thus, the correct option is 1) Carboxylic acid.
2) Ether
3) Ester
4) Ethane
5) Aldehyde
6) Amine
7) Alcohol
Learn more about organic compounds
https://brainly.com/question/5994723
#SPJ2
Which statement about metals and nonmetals is correct? (1 point)
O Metals and nonmetals can both be found in any column of the periodic table.
O Most metals are a solid under normal conditions, and most nonmetals are a liquid.
O Metals tend to be poor conductors of electricity, while nonmetals are strong conductors of electricity.
O Metals can be hammered into thin sheets, and nonmetals are brittle
Answers
Answer:
The answer is the 4th one
The statement about metals and nonmetals that is correct is: "The Metals can be hammered into thin sheets, and nonmetals are brittle."
Metals are found mostly towards the left hand side of the periodic table. Non-metal character increases as you move towards the right hand side of the table.
One common property of metals is that they are malleable; this means that they can be hammered into sheets while a common property of nonmetals is that most of them are brittle.
Learn more: https://brainly.com/question/10714037
