Mava=mbvb ma x5.0ml = 5.2ml x 0.10m

Answer:

Have you ever touched a fish? Most fish will feel a bit rough - due to their scales. Some, like sharks, will feel like sandpaper. Even fish with small, smoother scales will feel a bit like that. Amphibians don’t have scales, and most species will be wet to some degree - they have to keep their skin moist or they’ll die. A few groups, like toads and newts, have rougher skin, which is heavier and thicker, which allows them to retain moisture better away from water.

Functionally, the big thing about amphibian skin is that it is semi-permeable. Amphibians can breathe through their skin - all amphibians can get some oxygen through their skin, but some species of salamanders get all their oxygen that way - they have no lungs or gills. The skin can also allow water in - sort of like a paper towel. The bad thing is that other chemicals can pass through the skin, too - pollutants and other chemicals tend to affect amphibians far more than they do other groups.

Amphibians also shed their skin - fish do not. People don’t tend to see frogs shedding their skin often, though, since they eat it to regain nutrients and other resources in the skin.

Finally, since amphibian skin offers no defense against predators in the way that scales do, and limited barrier against disease the way non-amphibian skin does (shedding helps), the skin of many amphibians contain toxins, and some of them have anti-fungal properties (typically due to symbiotic bacteria). Many species have evolved chemical defenses in the skin, while others have glands that produce toxins that can be secreted outside of the skin.

The skin can withstand dessication more than the fish.

They have moist skin used as respiratory surface during deep sleep / hibernation.

They have moist skin due to secretion of mucus by glands under the skin.

please mark me as brainliest

Answer:

I don't know What can I do.

Answer:

There are no options in this question, however, it can be answered based on general understanding

- The number of neutrons each isotope contain

Explanation:

Isotopes are atoms of an element with the same atomic number or number of protons but different mass number/atomic masses. Since isotopes have same proton numbers, they have similar chemical behavior or identity.

However, difference in atomic mass or mass number of the same atomic number indicates that the number of neutrons each isotope contain differs from one another. Hence, in two isotopes of chlorine given as follows: Cl-35 and Cl-37, the NUMBER OF NEUTRONS in each atom differentiates the two isotopes.

Cl-35 contains 18 neutrons while Cl-37 contains 20 neutrons.

Answer:

gahwidsuacsgsuacayau1joagavahiq8wtw8quavakiafabajozyavqhaigavayquata

Explanation:

vahaiqgahiavavqugafayqigqvsbjsiagwyeiwvvs

Answer:

[tex]0.175\; \rm mol \cdot L^{-1}[/tex].

Explanation:

Magnesium chloride and silver nitrate reacts at a [tex]2:1[/tex] ratio:

[tex]\rm MgCl_2\, (aq) + 2\, AgNO_3\, (aq) \to Mg(NO_3)_2 \, (aq) + 2\, AgCl\, (s)[/tex].

In reality, the nitrate ion from silver nitrate did not take part in this reaction at all. Consider the ionic equation for this very reaction:

[tex]\begin{aligned}& \rm Mg^{2+} + 2\, Cl^{-} + 2\, Ag^{+} + 2\, {NO_3}^{-} \\&\to \rm Mg^{2+} + 2\, {NO_3}^{-} + 2\, AgCl\, (s)\end{aligned}[/tex].

The precipitate silver chloride [tex]\rm AgCl[/tex] is insoluble in water and barely ionizes. Hence, [tex]\rm AgCl\![/tex] isn't rewritten as ions.

Net ionic equation:

[tex]\begin{aligned}& \rm Ag^{+} + Cl^{-} \to AgCl\, (s)\end{aligned}[/tex].

Calculate the initial quantity of nitrate ions in the mixture.

[tex]\begin{aligned}n(\text{initial}) &= c(\text{initial}) \cdot V(\text{initial}) \\ &= 0.25\; \rm mol \cdot L^{-1} \times 0.150\; \rm L \\ &= 0.0375\; \rm mol \end{aligned}[/tex].

Since nitrate ions [tex]\rm {NO_3}^{-}[/tex] do not take part in any reaction in this mixture, the quantity of this ion would stay the same.

[tex]n(\text{final}) = n(\text{initial}) = 0.0375\; \rm mol[/tex].

However, the volume of the new solution is twice that of the original nitrate solution. Hence, the concentration of nitrate ions in the new solution would be [tex](1/2)[/tex] of the concentration in the original solution.

[tex]\begin{aligned} c(\text{final}) &= \frac{n(\text{final})}{V(\text{final})} \\ &= \frac{0.0375\; \rm mol}{0.300\; \rm L} = 0.175\; \rm mol \cdot L^{-1}\end{aligned}[/tex].

Answer:

True

Explanation:

Copper has the highest electrical conductivity rating of all non-precious metals: the electrical resistivity of copper = 16.78 nΩ•m at 20 °C. Specially-pure Oxygen-Free Electronic (OFE) copper is about 1% more conductive (i.e., achieves a minimum of 101% IACS).

True is the correct answer.

Answer:

[tex]x=54g[/tex]

Explanation:

From the question we are told that:

Content of Sterling silver:

Let x be sterling silver

Silver [tex]S=0.9x[/tex]

Copper [tex]C=0.1x[/tex]

Total  silver available [tex]T=48.3[/tex]

Generally the equation for Total amount to be made is mathematically given by

[tex]T=\frac{x*90}{100}[/tex]

[tex]x=\frac{48.3*100}{90}[/tex]

[tex]x=54g[/tex]

Answer:

361.4 pm is the length of the edge of the unit cell

Explanation:

First, let's calculate the average volume each atom is taking. Start with calculating how many moles of copper we have in a cubic centimeter by looking up the atomic weight. Atomic weight copper = 63.546 Now divide the mass by the atomic weight, getting 8.94 g / 63.546 g/mol = 0.140685488 mol And multiply by Avogadro's number to get the number of atoms: 0.140685488 * 6.022140857x10^23 = 8.472278233x10^22 Now examine the face-centered cubic unit cell to see how many atoms worth of space it consumes. There is 1 atom at each of the 8 corners and each of those atoms is shared between 8 unit cells for for a space consumption of 8/8 = 1 atom. And there are 6 faces, each with an atom in the center, each of which is shared between 2 unit cells for a space consumption of 6/2 = 3 atoms. So each unit cell consumes as much space as 4 atoms. Let's divide the number of atoms in that cubic centimeter by 4 to determine the number of unit cells in that volume. 8.472278233x10^22 / 4 = 2.118069558x10^22 Now calculate the volume each unit cell occupies. 1 cm^3 / 2.118069558x10^22 = 4.721280262x10^-23 cm^3 Let's get the cube root to get the length of an edge. (4.721280262x10^-23 cm^3)^(1/3) = 3.61426x10^-08 cm Now let's convert from cm to pm. 3.61426x10^-08 cm / 100 cm/m * 1x10^12 pm/m = 361.4 pm Doing an independent search for the Crystallographic Features of Copper, I see that the Lattice Parameter for copper at at 293 K is 3.6147 x 10^-10 m which is in very close agreement with the calculated amount above. And since metals expand and contract with heat and cold, I assume the slight difference in values is due to the density figure given being determined at a temperature lower than 293 K.

Answer:

A white gelatinous precipitate is observed in each case.

Explanation:

Qualitative analysis in chemistry is mostly used to identify the ions present in a sample by adding certain reagents. The observation after adding the reagent often leads to an inference.

When NaOH is added to a solution containing Zn^2+ in drops, a white gelatinous precipitate is observed.

When NH3(aq) is added in drops to a solution containing Zn^2+, a white gelatinous precipitate is also observed.

Answer:

here's your answer

Explanation:

Molar mass of CH3CH2OH = 46.06844 g/mol

This compound is also known as Ethanol.

Convert grams CH3CH2OH to moles  or  moles CH3CH2OH to grams

Molecular weight calculation:

12.0107 + 1.00794*3 + 12.0107 + 1.00794*2 + 15.9994 + 1.00794

Percent composition by element  

Hydrogen H 1.00794 6 13.128%

Carbon C 12.0107 2 52.143%

Oxygen O 15.9994 1 34.730%

The mass percentage of C in CH₃CH₂OH is 52.14% (to two decimal places)

To calculate the mass percentage of C (Carbon) in CH₃CH₂OH (Ethanol),

First, we will determine the mass of CH₃CH₂OH

Molar mass of CH₃CH₂OH = 46.07 g/mol

Mass of C = 12.01 g/mol

Now, for the mass percentage of C in CH₃CH₂OH,

We will determine the ratio of the total mass of C to the mass of CH₃CH₂OH, and then multiply by 100%

Since we have 2C in CH₃CH₂OH

Then, total mass of C in CH₃CH₂OH = 2 × 12.01 g/mol = 24.02 g/mol

That is,

Mass percentage of C in CH₃CH₂OH = [tex]\frac{24.02}{46.07} \times 100\%[/tex]

Mass percentage of C in CH₃CH₂OH = 0.5213805 ×100%

Mass percentage of C in CH₃CH₂OH = 52.13805%

Mass percentage of C in CH₃CH₂OH ≅ 52.14%

Hence, the mass percentage of C in CH₃CH₂OH is 52.14% (to two decimal places)

Learn more here: https://brainly.com/question/24712044

Answer:

rrgggf in the world of the world of the world of the up the good morning I will take a user and pass it on the

Answer:

3.6487g

CuCl2 moles reacted = (0.15×250)/1000

according to balanced chemical equation

precipitated Cu(OH)2 moles = Reacted CuCl2 moles

molar mass of Cu(OH)2 = 63.5+ (17+1)×2 = 97.5

mass of precipitate = (97.5 × 0.15×250)/1000

= 3.648g

Answer:

duw8 Wert gsi

Explanation:

pues pues y 8y1rcuecisscfjfj3eoeu xv cihskdkkd HD jekifeuifkeñ elijo eh fh FC eh SSH DJ djdvheshdhs

The mass percent of antimony in the sulfide is 71.7% and the mass of Sb2S3 is 0.148 g.

Mass percent is defined as a way of expressing a concentration or describing a component in a particular mixture.

To calculate the mass percent of an element in a compound, divide the mass of the element in 1 mole of the compound by the molar mass of the compound and multiply the result by 100.

Mass percent = Mass of chemical / Total mass  of compound x 100

Mass of ore = 10 kg

% antimony in ore = 10.6%

                              = 10.6 / 100 = 0.106 g

Mass of antimony = 0.106 g

Mass percent = Mass of antimony / Mass of stibnite x 100

71.7% = 0.106 / X x 100

X = 0.106 x 1000 / 71.7 x 1000

  = 106 / 717 = 0.148 g

Thus, the mass percent of antimony in the sulfide is 71.7% and the mass of Sb2S3 is 0.148 g.

To learn more about mass percent, refer to the link below:

https://brainly.com/question/5840377

#SPJ2

The correct answer is option c. Both A and B: An ion is a charged particle that is formed when an atom gains electrons or an atom loses electrons.

First you need to know the definition of ion. An ion is a molecule or atom that has a positive or negative electrical charge.

That is, an ion is an atom whose electric charge is not neutral. This charged particle can be positive or negative.  

Ionization is the chemical or physical process by which ions are produced. In this process, negatively charged ions are produced by gaining electrons and are known as anions.

The positively charged are produced by the loss of electrons and are known as cations.

In summary, an ion is a charged particle that is formed when  an atom gains electrons or an atom loses electrons, and they are known as cations and anions respectively.

The correct answer is both A and B.

Learn more about ions:

https://brainly.com/question/13692734?referrer=searchResults

Answer:

Solution given:

1 mole of KCl[tex]\rightarrow [/tex]22.4l

1 mole of KCl[tex]\rightarrow [/tex]74.55g

we have

0.14 mole of KCl[tex]\rightarrow [/tex]74.55*0.14=10.347g

74.55g of KCl[tex]\rightarrow [/tex]22.4l

10.347 g of KCl[tex]\rightarrow [/tex]22.4/74.55*10.347=3.11litre

volume of each solution contains 0.14 mol of KCl contain 3.11litre.

1 mol of any gas contains 22.4L of volume at STP

Volume of KCl:-

The equilibrium constant K₁ = Equilbrium constant K₂.

The equilibrium constant, K, of a reaction, is defined as:

"The ratio between concentration of products powered to their reaction quotient and concentration of reactants powered to thier reaction quotient".

For the reaction:

aA + bB ⇄ cC + dD

The equilibrium constant, K, is:

[tex]K = \frac{[C]^c[D]^d}{[A]^a[B]^b}[/tex]

Now, assuming the reaction of the problem is 1:1:

A + B ⇄ C + D

[tex]K = \frac{[C][D]}{[A][B]}[/tex]

The concentrations of the reactants are directly proportional to the volume added. Thus, we can assume that concentration = Volume. Replacing for K₁ and K₂:

[tex]K_1 = \frac{[C][D]}{[10mL][10mL]} = K_1 = \frac{[C][D]}{100mL^2}[/tex]

In the same way:

[tex]K_2 = \frac{[C][D]}{[1mL][100mL]} = K_2 = \frac{[C][D]}{100mL^2}[/tex]

Thus, we can say:

Learn more about chemical equilibrium in:

https://brainly.com/question/4289021?referrer=searchResults

Answer:

An ecosystem encompasses living organisms and the nonliving elements of their environments. Hence, the components of an ecosystem include animals, plants, microorganisms, rocks, soil, minerals, atmosphere, and the surrounding water masses. An ecosystem can be huge, cutting across several nations, or it can be relatively small, such as the body of an animal, which is home to numerous microorganisms.

We can describe ecosystems under two headings – natural ecosystems and unnatural ecosystems. Unnatural ecosystems, which include agricultural and urban areas, are greatly modified and maintained by human activity. Conversely, natural ecosystems are self-sufficient, balanced ecological units, with a high proportion of native biodiversity and minimal human disruption.

The natural ecosystem is broad. It is divided into two major groups – terrestrial and aquatic ecosystems. These are further divided into many other smaller types of ecosystems as outlined in this article.

Explanation:

Hope it helps.. if yes, plz mark me as brainliest

Answer:

the quantum mechanical model VS. Neils Bohr of the atom

Explanation:

The Bohr model and quantum model are models that explain the structure of an atom. ... The key difference between Bohr and quantum model is that Bohr model states that electrons behave as particles whereas quantum model explains that the electron has both particle and wave behavior.

Answer:

Correct option is

A

Explanation:

The number of molecules of CO involves in the slowest step will be 0 because CO is not involve in the slowest step i.e. rate determing step.

The name of the compound shown below is 1- pentene. The correct answer is option D.

A compound is a substance made up of two or more different elements chemically bonded together in a fixed ratio.

1-pentene is an unsaturated hydrocarbon with the chemical formula [tex]\rm C_5H_{10}[/tex]. It is an alkene, which means it contains a carbon-carbon double bond.

Therefore, option D. 1-pentene is the name of the compound shown.

Learn more about compound here:

https://brainly.com/question/14117795

#SPJ6

Answer:

[tex]X=6[/tex]

Explanation:

From the question we are told that:

Energy levels [tex]n=4[/tex]

Generally, the equation for spectral lines is mathematically given by

 [tex]X=\frac{n(n-1)}{2}[/tex]

 [tex]X=\frac{4(4-1)}{2}[/tex]

 [tex]X=6[/tex]

Answer:

the answer should be B because elements do not tranform into other elements in a chemical reaction

am I right please?

Answer:

43) protein

44) oxidoreductase

Answer:

-800 kJ/mol

Explanation:

To solve the problem, we have to express the enthalpy of combustion (ΔHc) in kJ per mole (kJ/mol).

First, we have to calculate the moles of methane (CH₄) there are in 2.50 g of substance. For this, we divide the mass into the molecular weight Mw) of CH₄:

Mw(CH₄) = 12 g/mol C + (1 g/mol H x 4) = 16 g/mol

moles CH₄ = mass CH₄/Mw(CH₄)= 2.50 g/(16 g/mol) = 0.15625 mol CH₄

Now, we divide the heat released into the moles of CH₄ to obtain the enthalpy per mole of CH₄:

ΔHc = heat/mol CH₄ = 125 kJ/(0.15625 mol) = 800 kJ/mol

Therefore, the enthalpy of combustion of methane is -800 kJ/mol (the minus sign indicated that the heat is released).

The compound in this reaction which is having the elemental ratio of 1:4:1 is NH₄Cl where nitrogen and chlorine are of one mole each with 4 hydrogens.

Elemental ratio of a compound is the ratio of number of atoms  of each  elements in that compound. The elemental ratio can be determined from the molecular formula of compounds.

The given reaction is a double displacement reaction. Here, the Cl group is replaced to the ammonia and OH group is replaced to the water. Thus, two species is replaced in the reaction.

In NH₄Cl, there are one nitrogen, 4 hydrogens and one chlorine atom. Therefore, the elemental ratio of the compound is 1:4:1. The elemental ratio of water is 2:1 and HCl is 1:1 and that in NH₄OH is 1:5:1. Hence, option b is correct.

To find more on elemental ratio, refer here:

https://brainly.com/question/17613193

#SPJ2

Answer:

As you know, one mole of any substance contains exactly

6.022

⋅

10

23

molecules of that substance - this is known as Avogadro's number.

Notice that you're dealing with more than

6.022

⋅

10

23

molecules of carbon dioxide, which means that you'll also be dealing with more than one mole of the compound.

More specifically, you'll have

1.5

⋅

10

26

molecules

⋅

1 mole CO

2

6.022

⋅

10

23

molecules

=

2.491

⋅

10

2

moles CO

2

Now, a substance's molar mass tells what the mass of one mole of that substance is. In carbon dioxide's case, its molar mass is equal to

44.01 g/mol

, which means that every mole of

CO

2

will have a mass of

44.01 g

.

In your case,

2.491

⋅

10

2

moles of

CO

2

would have a mass of

2.491

⋅

10

2

moles CO

2

⋅

44.01 g

1

mole CO

2

=

109.63 g

Rounded to two sig figs, the number of sig figs you have for the number of molecules of

CO

2

, the answer will be

m

C

O

2

=

110 g