Matty told Harriet that, later that same day, he was going to try to convince her to change her attitude toward the nutritional merits of doughnuts. Based on research findings regarding persuasion, how effective is Matty's strategy?

Explanation:

it helps to make juices.

It helps to make concentrated acid into dilute acid.

Answer:

Explanation:

Here are a few more examples:

1. Smoke and fog (Smog)

2. Dirt and water (Mud)

Answer:

It because ,sodium is a metal and chlorine is a non metal

Answer:

See explanation

Explanation:

Tyndall effect refers to the scattering of light in a solution. Tyndall effect occurs when the size of particles in the solution exceeds 1 nm in diameter. Such solutions are actually called false solutions.

In tincture of iodine, the size of particles in solution is less than 1 nm in diameter hence the solution does not exhibit Tyndall effect. Hence, tincture of iodine is a true solution.

Therefore, if the size of particles in solution exceeded 1nm in diameter, Tyndall effect is observed.

Answer:

62.5 moles of O₂.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

2C₈H₁₈ + 25O₂ —> 16CO₂ + 18H₂O

From the balanced equation above,

2 moles of C₈H₁₈ reacted with 25 moles of O₂.

Finally, we shall determine the number of mole of O₂ needed to react with 5 moles of C₈H₁₈. This can be obtained as shown below:

From the balanced equation above,

2 moles of C₈H₁₈ reacted with 25 moles of O₂.

Therefore, 5 moles of C₈H₁₈ will react with = (5 × 25) / 2 = 62.5 moles of O₂.

Thus, 62.5 moles of O₂ is needed for the reaction.

Explanation:

a unit of mass used to express atomic and molecular weights, equal to one twelfth of the mass of an atom of carbon-12.

Answer:

Atomic Mass Unit is also called Dalton. It is used to express atomic and molecular weight. It is defined as 1/12 of the mass of an unbound neutral atom of carbon.

Answer:

sodium chloride

hope that helped :)

Answer:

Chlorine is a greenish yellow gas at room temperature and atmospheric pressure. ... yielding chlorine water, and from this solution a solid hydrate of ideal ...

Answer:

69

Explanation:

I thought that I answer is correct

Answer:

The answer is 69

Explanation:

Because if you add one its 66, and so on, hope this helps! but if you add five it will be 69, if you need help with easy equations let me know

Explanation:

Your search - What is the answer to 9.7300x10^2+9.8700x 10^3 1.0843x 10^ in scientific notation - did not match any documents.

Suggestions:

Make sure that all words are spelled correctly.

Try different keywords.

Try more general keywords.

Try fewer keywords.

Answer:

Pb2+ (aq) + CrO42-(aq) --> PbCrO4(s) - A precipitation reaction

2 Mg(s) + O2(g) -> 2 MgO(s) - An oxidation-reduction reaction that is also a synthesis reaction

Ag^+ (aq) + 2NH3(aq) --> [Ag(NH3)2]^+ (aq) - A Lewis acid-base reaction the produces a coordination complex

Explanation:

A precipitation reaction is one in which two aqueous reactants yields an insoluble product called a precipitate as shown in reaction 1 above.

In the second reaction Mg is oxidized from zero to + 2 while oxygen was reduced from zero to -2 as the MgO is formed hence the reaction is an oxidation-reduction reaction that is also a synthesis reaction.

In the third reaction, Ag^+ a Lewis acid reacts with NH3, a lewis base to yield the complex [Ag(NH3)2]^+.

Explanation:

it is that when an object is moving 25 m per sec to calculate its time we can simply divide 1.5 by 25 and multiply by 1

Answer:

Answer: Atoms of chlorine (CI) and magnesium (Mg)

Answer: Atoms of chlorine (CI) and magnesium (Mg)is your answer

Answer:

the reactants are carbon dioxide ,iron, oxygen

The heat of hydration is defined as the heat absorbed or evolved when one mole of a substance undergoes hydration. The heat of solution is the enthalpy change associated with he dissolution of a solute. The lattice energy is the heat. Lattice energy is the energy released when the components of the lattice are brought together from infinity.

Hence the heat of solution for LiF → Li^+ + F- is -1966  kJ/mol

Given that;

Heat of hydration = ΔH solution – ΔH lattice energy

Where,

ΔH solution  = Heat of the solution

ΔH lattice energy = Lattice energy of the solution

The heat of solution or enthalpy of dissolution is defined as the enthalpy change associated with the dissolution of a solute in a solvent

From the formula above;

ΔH solution = Heat of hydration + ΔH lattice energy

Heat of hydration = [(-431) + (-499)] = -930 kJ/mol

ΔH solution = (-930) + (-1,036) = -1966  kJ/mol

Hence the heat of solution for LiF → Li^+ + F- is -1966  kJ/mol

https://brainly.com/question/13526282

Answer: broooo what is this

Explanation:

Answer:

oxygen molecule has two oxygen atom . Each O atom share 2 electrons to form two covalent bonds out of which one is sigma bond and other is pi bond . sigma bond is formed by axial overlap 2p atomic orbitals of oxygen and pi bond is formed of lateral overlap of 2p atomic orbitals of oxygen .

Answer:

the answer is 47.9 and ik because I just had that question

The empirical formula of the compound is O₄Pb₃.

An Empirical system is the chemical system of a compound that offers the proportions of the elements gifted within the compound however not the real numbers or arrangement of atoms. This would be the lowest complete variety ratio of the elements within the compound.

Amount of lead (Pb) = 90.6%

⇒and amount of oxygen = 9.4%

taking the whole number ratio

o = 4

Pb = 3

∴ ⇒O: Pb=4:3

O4Pb3 answer.

Learn more about empirical formula here:-https://brainly.com/question/1603500

#SPJ2

Answer:

a. 1 x 10^-35

Explanation:

The correct compound given is: [tex]\mathsf{Cu_3(AsO_4)}_2[/tex]

To predict the approximate Ksp value of the given compound, we will need to express the oxidation-reduction half-reaction of the compound and its dissociation, then, we will use the Nernst equation to determine the approximate Ksp value.

To start with the reduction half-reaction:

[tex]\mathsf{Cu_3(AsO_4)_{2}(s) + 6e^- \to 2As O_{4}^{3-}_{(aq)}+3Cu(s) }[/tex]

The oxidation half-reaction is:

[tex]\mathsf{3Cu(s) \to 3CU^{2+}_{(aq)} + 6e^-}[/tex]

The overall cell reaction now is:

[tex]\mathsf{Cu_3(AsO_4)_{2}(s) \to 3Cu^+ (aq) + 2As O_{4}^{3-}_{(aq)} }[/tex]

From the reduction half-reduction, the number of moles of electrons (n) transferred is 6 moles.

By applying the Nernst equation:

[tex]\mathsf{E_{cell} = E^0_{cell} -\dfrac{0.0591V}{n}log [Cu^{2+}]^3[AsO_4^{3-}]^2 }[/tex]

At standard conditions;

The standard cell potential [tex]\mathsf{E^0_{cell} = -0.342 \ V}[/tex]

and [tex]\mathsf{E_{cell} = 0 \ V}[/tex] since it is at equilibrium.

∴

[tex]\mathsf{0 = -0.342 -\dfrac{0.0591V}{6}log [Cu^{2+}]^3[AsO_4^{3-}]^2 } \\ \\ \\ \mathsf{0.342 = -\dfrac{0.0591V}{6}log [Cu^{2+}]^3[AsO_4^{3-}]^2 }[/tex]

[tex]\mathsf{log [Cu^{2+}]^3[AsO_4^{3-}]^2 = \dfrac{-(0.342)*6}{0.0591 }}[/tex]

[tex]\mathsf{log [Cu^{2+}]^3[AsO_4^{3-}]^2 = -34.7}[/tex]

[tex]\mathsf{log [Cu^{2+}]^3[AsO_4^{3-}]^2 \simeq -35}[/tex]

[tex]\mathsf{[Cu^{2+}]^3[AsO_4^{3-}]^2 = 10^{-35}}[/tex]

[tex]\mathbf{K_{sp} = [Cu^{2+}]^3[AsO_4^{3-}]^2 = 1\times 10^{-35}}[/tex]

Force = The external energy that changes or tends to change the state of any body or object is called force.

Speed = The rate of distance is called speed.

Answer:

Force is a push or pull which changes or tend to change the position of a body.

The rate of change its position with time or magnitude is called speed.

Ca^2+ ion  is smaller than Mg^2+ ion hence it has a greater heat of formation or lattice energy.

When a crystal lattice is formed, the energy that is released if the component ions of the compound are brought together from infinity is called the lattice energy. It is the energy released when a crystal lattice is formed from its component ions.

The question lets us know that the heat released by the compounds depends on the energy released upon formation of the compound. Hence, the higher the energy released upon formation, the higher the magnitude of heat released upon dissolution of the compound.

Recall that lattice energy depends on the size of the ions. Thus, the smaller the ions, the higher the lattice energy.

Ca^2+ is smaller than Mg^2+ hence more energy is given off when CaCl2  is formed than when MgCl2  is formed.

As stated above, the greater the lattice energy, the greater the heat released when the lattice dissolves and the higher the rise in temperature.

Putting all these together, Sample A must be CaCl2 while sample B must be MgCl2.

https://brainly.com/question/2815368

Solution :

Cd(s) ---------------------->  [tex]Cd^{+2}[/tex] (aq) + 2[tex]e^-[/tex]      ,     [tex]E_0[/tex]  =   0.34 v

[tex]Cu^{+2}[/tex]  (aq)  +   2[tex]e^-[/tex]  ------------> Cu (s)             ,     [tex]E_0[/tex]  =  -0.04 v

----------------------------------------------------------------------------------------------

Cd(s)  +  [tex]Cu^{+2}[/tex]  (aq)  ------------->  [tex]Cd^{+2}[/tex] (aq)  +  Cu (s)   ,      [tex]E_0[/tex]  =  0.30 v  

The cell potential is defined as the measure of [tex]\text{ potential difference }[/tex]  between the [tex]\text{two half cells}[/tex] of an electrochemical cell.  

Answer:

Nitrogen oxides are used in the production of nitric acid, lacquers, dyes, and other chemicals. Nitrogen oxides are used in rocket fuels, in the nitrification of organic chemicals, and in the manufacture of explosives.

Explanation:

Answer:

Some examples of solutions are salt water, rubbing alcohol, and sugar dissolved in water. ... In our example of salt water, the solute is the salt. Solvent: this is the substance that makes up the majority of the solution. This is the part where the solute is dissolved.

Explanation:

I hope they should be right answer

Answer:

Create a new account as the thing you're experiencing now is due to the fact that Brainly had blocked your account.

Answer: The given amount of [tex]Cd(NO_3)_2.4H_2O[/tex] contains 0.430 moles of Cd, 0.860 moles of N and [tex]2.59\times 10^{23}[/tex] molecules of water.

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of [tex]Cd(NO_3)_2.4H_2O[/tex] = 132.4 g

Molar mass of [tex]Cd(NO_3)_2.4H_2O[/tex] = 308.5 g/mol

Plugging values in equation 1:

[tex]\text{Moles of }Cd(NO_3)_2.4H_2O=\frac{132.4g}{308.5g/mol}=0.430 mol[/tex]

1 mole of [tex]Cd(NO_3)_2.4H_2O[/tex] contains 1 mole of Cd, 2 moles of nitrogen atom (N), 10 moles of oxygen atom (O) and 8 moles of hydrogen atom (H).

So, 0.430 moles of [tex]Cd(NO_3)_2.4H_2O[/tex] will contain = [tex](1\times 0.430) = 0.430mol[/tex] of Cd and [tex](2\times 0.430)=0.86mol[/tex] of N

According to the mole concept:

1 mole of a compound contains [tex]6.022\times 10^{23}[/tex] number of molecules

So, 0.430 moles of [tex]Cd(NO_3)_2.4H_2O[/tex] will contain = [tex]\frac{6.022\times 10^{23}}{1mol}\times 0.430mol=2.59\times 10^{23}[/tex] number of water molecules.

Hence, the given amount of [tex]Cd(NO_3)_2.4H_2O[/tex] contains 0.430 moles of Cd, 0.860 moles of N and [tex]2.59\times 10^{23}[/tex] molecules of water.

Explanation:

here's the answer to your question

Explanation:

here's the answer to your question

double arrow just mean that it's a reversible process, and the reaction can go back and forth.

Answer:

nitrogen is used in the production of  1) fertilisers  2) nitric acid  3) nylon  4) dyes  and  5) explosives

please give me brainliest if you can :))

Which of the following statements best explains the trends in boiling points?

A. The atomic size increases down the group, and this decreases the strength of the intermolecular forces.

                                           A is incorrect

B. The total number of electrons decreases down the group, and this decreases the strength of the intermolecular forces.

                                            B is incorrect

C. The total number of electrons increases down the group, and this increases the strength of the intermolecular forces.

                                             C is correct

D. The chances of forming a permanent dipole increases down the group, and this increases the strength of the intermolecular forces.

                                              D is incorrect

The boiling point increase down a group because the total number of electrons increases down the group, and this increases the strength of the intermolecular forces. Hence option C is correct.

Boiling point of a substance is the temperature at which the substance changes from its liquid state to vapour state. Boiling point of a molecule or compounds depends on the bond type, molecular weight, temperature and pressure.

For ionic compounds, boiling point will be higher since ionic bonds are stronger than covalent compounds. There is a periodic trend for the physical properties such as boiling point for elements in periodic table.

Down a group, the number of electrons increases and the atomic size also as well as the ionic character increases down a group . These two facts leads to higher intermolecular attraction, thus more temperature have to applied to weaken the bonds.

Higher temperature to be applied means the boiling point of the substance is higher. Therefore, boiling point down a group increases because of the higher intermolecular attraction as said in option C.

To find more about boiling point, refer the link below:

https://brainly.com/question/2153588

#SPJ1