Answer:
3.11 mg
Explanation:
From the question given above, the following data were obtained:
Half-life (t½) = 2.6 hr
Original amount (N₀) = 49.7 mg
Time (t) = 10.4 hr
Amount remaining (N) =.?
Next, we shall determine the number of half-lives that has elapsed. This can be obtained as follow:
Half-life (t½) = 2.6 hr
Time (t) = 10.4 hr
Number of half-lives (n) =?
n = t / t½
n = 10.4 / 2.6
n = 4
Thus, 4 half-lives has elapsed.
Finally, we shall determine the amount remaining. This can be obtained as illustrated below:
Original amount (N₀) = 49.7 mg
Number of half-lives (n) = 4
Amount remaining (N) =.?
N = 1/2ⁿ × N₀
N = 1/2⁴ × 49.7
N = 1/16 × 49.7
N = 0.0625 × 49.7
N = 3.11 mg
Therefore, the amount remaining is 3.11 mg
Question 16 of 25
What is the energy of a photon emitted with a wavelength of 654 nm?
A. 1.01 * 10-27 J
B. 4.33 x 10-22
C. 1.30 x 10-22 j
D. 3.04 10-19 J
SUBMIT
Answer:
D. 3.04 × 10^-19 J
Explanation:
c = lambda * nunu = c/lambda
E = h* nu
E = h * c/lambda = 6.626x10^-34 J-sec * 3x10^8 m/sec / 6.54x10^-7 m
E = 3.04x10^-19 J
The compound IF5 contains Question 16 options: polar covalent bonds with partial negative charges on the F atoms. ionic bonds. polar covalent bonds with partial negative charges on the I atoms. nonpolar covalent bonds.
Answer:
See explanation
Explanation:
The molecule IF5 possesses five I-F polar bonds. However, the presence of polar bonds does not automatically imply that the molecule will be polar.
The geometry of the molecule is very important in determining the polarity of a compound. Since IF5 has a lone pair of electrons, the molecule is bent and as such there is a permanent dipole moment created in the molecule thereby making IF5 polar in nature.
The homework question reads:
"A sample of gas in a cylinder of volume 3.42 L at 298 K
and 2.57 atm expands to 7.39 L by two different pathways.
Path A is an isothermal, reversible expansion. Path B has two
steps. In the fi rst step, the gas is cooled at constant volume to
1.19 atm. In the second step, the gas is heated and allowed to
expand against a constant external pressure of 1.19 atm until
the final volume is 7.39 L. Calculate the work for each path.
Answer:
Explanation:
this guy on brainly already did it:
Alleei
Virtuoso
4.8K answers
37.1M people helped
Answer : The work done for path A and path B is -685.3 J and -478.1 J respectively.
Explanation :
To calculate the work done for path A :
First we have to calculate the moles of the gas.
where,
= initial pressure of gas = 2.57 atm
= initial volume of gas = 3.42 L
n = moles of gas = ?
R = gas constant = 0.0821 atm.L/mol.K
T = temperature of gas = 298 K
Now put all the given values in the above formula, we get:
According to the question, this is the case of isothermal reversible expansion of gas.
As per first law of thermodynamic,
where,
= internal energy
q = heat
w = work done
As we know that, the term internal energy is the depend on the temperature and the process is isothermal that means at constant temperature.
So, at constant temperature the internal energy is equal to zero.
The expression used for work done will be,
where,
w = work done on the system = ?
n = number of moles of gas = 0.359 mole
R = gas constant = 8.314 J/mole K
T = temperature of gas = 298 K
= initial volume of gas = 3.42 L
= final volume of gas = 7.39 L
Now put all the given values in the above formula, we get :
Thus, the work done of path A is, -685.3 J
To calculate the work done for path B :
The formula used for isothermally irreversible expansion is :
where,
w = work done
= external pressure = 1.19 atm
= initial volume of gas = 3.42 L
= final volume of gas = 7.39 L
Now put all the given values in the above formula, we get :
Thus, the work done of path B is, -478.1 J
42 Organic compound may have names ending in -ane, -ene, -ol or -oic acid. How many of these endings indicate the compounds contain double bonds in their molecules? * (1 Point)
Answer: Organic compounds ending with the name (-ene) indicate that the compounds contain double bonds in their molecules.
Explanation:
Organic compounds are those molecules that contains carbon atoms (as their main element), hydrogen and oxygen which are usually present. The presence of numerous organic compounds is due to the following properties of carbon:
--> the exceptional ability of carbon atoms to catenate, that is, to combine with one another to form straight chains, branched chains or ring compounds containing many carbon atoms.
--> The ease with which carbon combines with hydrogen, oxygen, Nitrogen and halogens
--> The ability of carbon atoms to form single, DOUBLE or triple bonds.
The organic compound that has the name ending with -ene are known as the alkenes. The members of the alkene series are formed from the alkanes by the removal of two hydrogen atoms and the introduction of a DOUBLE BOND in the carbon chain. They are named after the corresponding alkanes by changing the -ane ending to -ene.
Note: the systematic name of a compound is formed from the root hydrocarbon by adding a suffix and prefixes to denote the substitution of the hydrogen atoms.
An instant cold pack purchased in a pharmacy contains a packet of solid ammonium nitrate surrounded by a pouch of water. When the packet of NH4NO3 is broken, the solid dissolves in water and cooling of the mixture occurs because the solution process for NH4NO3 is endothermic. Explain, in terms of what happens to the molecules and ions, why this mixing occurs spontaneously.
A. In solution, the ions NH4+ and NO3- are highly ordered throughout the solvent.
B. In the solid, the ions in NH4NO3 are highly ordered.
C. In solution, the ions NH4+ and NO3- are randomly distributed throughout the solvent.
D. The increase in randomness makes the process spontaneous.
E. The decrease in randomness makes the process spontaneous.
Answer:
c
letra c certeza confia
please help me with b and c.
Answer:
c.sf4 b.2
Explanation:
The decomposition of ethyl amine, C2H5NH2, occurs according to the reaction: C2H5NH2(g)⟶C2H4(g)+NH3(g) At 85∘C, the rate constant for the reaction is 2.5 x 10-1 s-1. What is the half-life (in sec) of this reaction?
Answer:
2.772 seconds
Explanation:
Given that;
t1/2 = 0.693/k
Where;
t1/2 = half life of the reaction
k= rate constant
Note that decomposition is a first order reaction since the rate of reaction depends on the concentration of one reactant
t1/2 = 0.693/2.5 x 10-1 s-1
t1/2= 2.772 seconds
5.60g of glyceraldehydes was dissolved in 10ml of a solvent and placed in a 50mm cell if the rotation is 1.74 calculate the specific rotation?
Answer:
6.214 degrees-mL/gdm
Explanation:
The specific rotation α' = α/LC where α = observed rotation, L = length of tube and C = concentration of solution.
Given that α = 1.74, L = length of cell = 50 mm = 0.50 dm and C = m/V where m = mass of glyceraldehyde = 5.60 g and V = volume = 10 ml
So, C = m/V = 5.60 g/10 ml = 0.560 g/ml
Since α' = α/LC
substituting the values of the variables into the equation, we have
α' = α/LC
α' = 1.74/(0.50 dm × 0.560 g/ml)
α' = 1.74/(0.28 gdm/l)
α' = 0.006214 °mL/gdm
α' = 6.214 °mL/gdm
α' = 6.214 degrees-mL/gdm
Classify the processes as endothermic or exothermic.
a. Ice melting
b. Water condensing on surface
c. Baking a cake
d. The chemical reaction inside an instant cold pack.
e. A car using gasoline
endothermic absorbs heat
exothermic gives heat
a. endothermic
b. exothermic
c. endothermic
d. exothermic
a. Ice melting - endothermic
b. Water condensing on the surface - exothermic
c. Baking a cake - endothermic
d. The chemical reaction inside an instant cold pack - endothermic
e. A car using gasoline - exothermic
What is an exothermic and endothermic reaction?An exothermic reaction can be described as a thermodynamic chemical reaction that emits energy from the system to its surroundings usually in the form of light, heat, or sound.
While an endothermic reaction can be described as an opposite of an exothermic reaction where the energy gains in the form of heat. In exothermic chemical reactions, the bond energy is transformed into thermal energy.
In exothermic reactions, the reaction happens the form of the kinetic energy of molecules when the energy is released. The release of energy is due to the electronic transition of electrons from one energy level to another.
The burning of gasoline, and water condensation is also an exothermic reaction in which energy is released while ice melting and baking cake is an endothermic reaction.
Learn more about the exothermic process, here:
brainly.com/question/12321421
#SPJ5
Apakah ciri-ciri ikan
Answer:
fishes are cold blooded
A one electron species, X m, where m is the charge of the one electron species and X is the element symbol, loses its one electron from its ground state when it absorbs 3.49 x 10-17 J of energy. Using the prior information, the charge of the one electron species is:_____________
a. +8
b. +2
c. +3
d. +1
e. +4
Answer:
Option C
Explanation:
From the question we are told that:
Difference in energy [tex]\delta E =3.49 * 10^{-17} J[/tex]
The Ground state Difference in energy at n=1
[tex]\delta E_g = 2.18 * 10^{-18} × Z^2[/tex]
Generally the equation for Difference in energy is mathematically given by
[tex]\delta E=\delta E_g[/tex]
Therefore
[tex]3.49 * 10^{-17} = 2.18 * 10^{-18} * Z^2[/tex]
[tex]Z^2=16[/tex]
[tex]Z=4[/tex]
Therefore
Charge on element Z Q_Z
[tex]Q_Z= Atomic\ no\. of\ element - No.\ of\ electrons\ of\ element[/tex]
[tex]Q_Z =4-1[/tex]
[tex]Q_Z=+3[/tex]
Option C
Sometimes in lab we collect the gas formed by a chemical reaction over water . This makes it easy to isolate and measure the amount of gas produced.
Suppose the CO, gas evolved by a certain chemical reaction taking place at 50.0°C is collected over water, using an apparatus something like that in the sketch, and the final volume of gas in the collection tube is measured to be 132. mL. Calculate the mass of CO, that is in the collection tube. Round your answer to 2 significant digits.
Answer:
0.17 g
Explanation:
Since the volume of gas collected is 132 mL, we need to find the number of moles of gas present in 132 mL.
So, number of moles, n = volume of gas, v/molar volume, V
n = v/V where v = 132 mL = 0.132 L and V = 22.4 L
So, substituting the values of the variables into the equation, we have
n = v/V
n = 0.132 L/22.4 L
n = 0.005893 mol
We then need to calculate the molar mass of CO, M = atomic mass of carbon + atomic mass of oxygen = 12 g/mol + 16 g/mol = 28 g/mol
Also, number of moles of gas, n = m/M where m = mass of CO and M = molar mass of CO
m = nM
m = 0.005893 mol × 28 g/mol
m = 0.165004 g
m ≅ 0.17 g to 2 significant digits
Viết các đồng phân cấu tạo mạch hở của C4H6O2 cùng nhóm chức axit
Answer:
+ axit
CH2=CH-CH2-COOH,
CH3-CH=CH-COOH (tính cả đồng phân hình học)
CH2=C(CH3)-COOH.
+ este
HCOOCH=CH-CH3 (tính cả đồng phân hình học)
HCOO-CH2-CH=CH2,
HCOOC(CH3)=CH2.
CH3COOCH=CH2
CH2=CH-COOCH3
You should set out support, like a cork ring or clamp, before removing the glassware from a glassware kit to place the glassware in and to stop it from _________. Thoroughly check that the glasswar is________ and that it does not have any _______before using it.
Answer:
(A) Slipping and breaking
(B) Clean and dry
(C) Cracks
Explanation:
This describes the process of unpacking a glassware for use.
You should set out support like a cork ring or clamp (these are simple machines that'll hold the glassware in place) before removing the glassware from a glassware kit; to place the glassware in and to stop it from slipping and breaking.
Thoroughly check that the glassware is clean and dry and that it does not have any cracks, before using it.
Elements that have the same number of electron rings are ?
Answer:
are in the same orbital
Explanation:
Answer:
are in the same orbit
Explanation:
A sample of pure tin metal is dissolved in nitric acid to produce 15.00 mL of solution containing Sn2+. When this tin solution is titrated, a total of 42.1 mL of 0.145 mol/L KMnO4 is required to reach the equivalence point. a. What is the concentration of the Sn2+ solution?b. Find the concentration of the Sn2+(aq) in mol/L: (give your answer to 3 decimal places)
Answer:
1.00 M
Explanation:
Sn^2+ reacts with KMNO4 as follows;
5Sn^2+(aq) + 2MnO4^-(aq) + 16H^+(aq) ----> 5Sn^4+(aq) + 2Mn^+(aq) + 8H2O(l)
The number of moles of MnO4^- reacted = 42.1/1000 L × 0.145 mol/L
= 0.0061 moles
If 5 moles of Sn^2+ reacts with 2 moles of MnO4^-
x moles of Sn^2+ reacts with 0.0061 moles of MnO4^-
x= 5 × 0.0061/2
x= 0.015 moles
Since the volume of the Sn^2+ solution is 15.00mL or 0.015 L
number of moles = concentration × volume
Concentration = number of moles/volume
Concentration= 0.015 moles/0.015 L
Concentration = 1 M
When taking pH measurements of solutions, why is it important to stir thoroughly after adding each reagent? a. Mixing helps keep the solution components from contaminating the pH meter. b. A pH meter can only measure ions that are flowing past the meter at a fast speed. c. Mixing helps prevent precipitation of insoluble salts out of solution. d. Mixing helps ensure that the heasured pH is reflective of the entire solution.
Answer:
d. Mixing helps ensure that the measured pH is reflective of the entire solution.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to reason that the answer is d. Mixing helps ensure that the measured pH is reflective of the entire solution because mixing help us to move the ions all around the solution so it undergoes homogenization and the measured pH at any point of the solution will be the same.
Moreover, we need to keep in mind that the incomplete stirring leads to regions with more concentration of the acid or base, or what we know as a gradient of concentration, which may lead to a incorrect measurement.
Regards!
differences between expansion of solid and liquid
any two functions of crystals
Answer:
1. Participating in calcium homeostatis storage of calcium.
2. High capacity calcium (Ca) regulation and protection against herbivory
[tex]\large \boxed{\sf 2 \: functions \: of \: crystals \: are :- } [/tex]
_________________
⟹
[tex] \sf \: \underline{ Calcium \: oxalate \: (CaOx) \: crystals} \: are \: distributed \: \\\sf among \: all \: taxonomic \: levels \\ \sf\: of \: photosynthetic \: organisms \: from \\ \sf \: small \: algae \: to \: angiosperms \: and \: giant \: gymnosperms .[/tex]
__________________
⟹
[tex]\sf Bone \: is \: mostly \: made \: of \: \underline{mineral \: crystals} \: \\ \sf and \: the \: protein \: collagen. \: The \: mineral \: crystals \: bone \\ \sf\: provide \: strength \: and \: rigidity \: for \: the \: matrix \: upon \: \\ \sf \: and \: within \: which \: they \: are \: deposited.[/tex]
For the following list of acids, rank the acids in strength from weakest acid to strongest acid.
a. FCH2OH
b. F2CHOH
c. CH3OH
d. F3COH
Answer:
CH3OH < FCH2OH < F2CHOH < F3COH
Explanation:
Let us recall that, for a carboxylic acid, the dissociation of the acid yields;
RCOOH ⇄RCOO^- + H^+
The ease of dissociation and release of the hydrogen ion depends on the nature of the group designated R.
When R is is a highly electronegative element, the -I inductive effect causes the hydrogen to become less tightly held by the C-Cl bond.
As the number of electron withdrawing substituents increaseses, the acid ionizes much more and becomes stronger.CH3OH < FCH2OH < F2CHOH < F3COH
Hence, the order of decreasing acid strength is;
A system receives 425 J of heat from and delivers 425 J of work to its surroundings. What is the change in internal energy of the system (in J)?
Answer:
0 J
Explanation:
Applying,
ΔE = q+w................ Equation 1
Where ΔE = change in internal energy of the system, q = Heat of the system, w = work of the system.
Note: q is positive, while w is negative
From the question,
Given: q = 425 J, w = -425 J
Substitute these values into equation 1
ΔE = 425-425
ΔE = 0 J
Hence the change in internal energy of the system is 0 J
A reaction at 5.0°C evolves 583.mmol of dinitrogen difluoride gas. Calculate the volume of dinitrogen difluoride gas that is collected. You can assume the pressure in the room is exactly 1atm . Round your answer to 3 significant digits.
Answer: The volume of dinitrogen difluoride gas collected is 13.31 L.
Explanation:
Given: Temperature = [tex]5.0^{o}C[/tex] = (5 + 273) K = 278 K
Moles = 583 mmol (1 mmol = 0.001 mol) = 0.583 mol
Pressure = 1 atm
Formula used to calculate volume is as follows.
PV = nRT
where,
P = pressure
V = volume
n = no. of moles
R = gas constant = 0.0821 L atm/mol K
T = temperature
Substitute the values into above formula as follows.
[tex]PV = nRT\\1 atm \times V = 0.583 \times 0.0821 L atm/mol K \times 278 K\\V = 13.31 L[/tex]
Thus, we can conclude that the volume of dinitrogen difluoride gas collected is 13.31 L.
Which functional group is used in other functional groups?
A. Ester
B. Carbonyl
c. Hydroxyl
D. Amino
q9
Answer:
The answer is B. Carbonyl
Carbonyl is the functional group is used in other functional groups. Therefore, option (B) is correct.
What do you mean by carbonyl functional group?A functional group with the formula C=O that is composed of a carbon atom double-bonded to an oxygen atom and is divalent at the C atom is known as a carbonyl group in organic chemistry.
A carbonyl gathering is a synthetically natural utilitarian gathering made out of a carbon iota twofold clung to an oxygen molecule - - > [C=O] The most straightforward carbonyl gatherings are aldehydes and ketones typically connected to another carbon compound.
A functional group with a carbon double bonded to an oxygen is called a carbonyl group. They have unsurprising properties, like extremity, instability, and reactivity.
Learn more about carbonyl functional group:
https://brainly.com/question/24186249
#SPJ7
10. Hydrogen peroxide (H2O2: M = 34 g mol-1) is a powerful oxidising agent that is used in concentrated solution in rocket fuel systems and in dilute solution as in hair bleach. An aqueous solution of H2O2 is 30 % by mass and has a density of 1.11 g cm-3. Express the concentration of the solution in terms of: (i) Molality
Answer:
The molality of solution=12.605 m
Explanation:
We are given that
Molar mass of Hydrogen peroxide, M=34 g/mol
Density of solution, [tex]\rho=1.11gcm^{-3}[/tex]
30% Means mass of solute (Hydrogen peroxide)=30 g
Mass of solvent =100-30=70 g
Total mass of solution, m=100 g
Number of moles of solute=[tex]\frac{given\;mass}{molar\;mass}[/tex]
Using the formula
Number of moles of hydrogen peroxide=[tex]\frac{30}{34}[/tex]
Now, molality of solution
[tex]m=\frac{number\;of\;moles\;of\;solute}{mass\;of\;solvent}\times 1000[/tex]
[tex]m=\frac{30}{70\times 34}\times 1000[/tex]
[tex]m=12.605 m[/tex]
Hence, the molality of solution=12.605 m
If 52.5 mL of lead(II) nitrate solution reacts completely with excess sodium iodide solution to yield 0.248 g of precipitate, what is the molarity of lead(II) ion in the original solution
Explanation:
The volume of given lead nitrate solution is:
52.5 mL.
The amount of lead iodide formed is ---0.248 g.
To get the molarity of lead (II) ion follow the below-shown procedure:
The number of moles of lead iodide formed is:
[tex]number of moles of lead iodide(n)=mass of lead iodide/its molecular mass\\n=0.248 g/461.01g/mol\\n=0.000537mol[/tex]
0.000537 mole of lead iodide contains --- 0.000537 moles of lead (II) ion.
Thus, the number of moles are there, volume is there, and to get the molarity of lead (II) ion use the formula:
[tex]Molarity=\frac{number of moles}{volume in L.} \\M=0.000537 mol / 0.0525 L.\\M=0.0102mol/L[/tex]
Molarity of lead iodide is --- 0.0102 M.
how many of the electrons in a molecule of ethane are not involved in bondind
Ethane consists of 6C−H bonds and 1C−C bond. Total number of bonds is 7. Each bond is made up of two electrons
#LETS STUDY#BRAINLEST LOVE❣️
It is found that, when a dilute gas expands quasistatically from 0.40 to 5.0 L, it does 210 J of work. Assuming that the gas temperature remains constant at 300 K, how many moles of gas are present
Answer:
[tex]n=0.033mole[/tex]
Explanation:
From the question we are told that:
Initial volume [tex]V_1=0.40L[/tex]
Final Volume[tex]V_2=5.0L[/tex]
Work [tex]W=210J[/tex]
Temperature [tex]T=300k[/tex]
Generally the equation for Ideal gas is mathematically given by
[tex]W=nRTIn\frac{V_2}{V_1}[/tex]
[tex]n=\frac{W}{RTIn\frac{V_2}{V_1}}[/tex]
[tex]n=\frac{210}{8.32*300In\frac{5.0}{0.4}}[/tex]
[tex]n=0.033mole[/tex]
When 52 grams of O2 react with excess C3H8, how many grams of CO2 would be produced?
Answer:35.1g of CO2
Explanation:
C3H8+5O2------=3CO2+4H2O
Please explain how to do it as well!
Write a complete, balanced equation for the following reactions:
a) The combustion of C₆H₁₂O (teachers note: You figure out products).
b) Aqueous ferric iron (III) sulfate plus barium hydroxide (teachers note: You figure out the products).
Answer:
a) C₆H₁₂O + 8.5 O₂ ⇒ 6 CO₂ + 6 H₂O
b) Fe₂(SO₄)₃ + 3 Ba(OH)₂ ⇒ 3 BaSO₄ + 2 Fe(OH)₃
Explanation:
a) A combustion is a reaction of a compound with oxygen to produce carbon dioxide and water. The corresponding equation is:
C₆H₁₂O + O₂ ⇒ CO₂ + H₂O
We will start balancing C atoms by multiplying CO₂ by 6 and H atoms by multiplying H₂O by 6.
C₆H₁₂O + O₂ ⇒ 6 CO₂ + 6 H₂O
Then, we get the balanced equation by multiplying O₂ by 8.5.
C₆H₁₂O + 8.5 O₂ ⇒ 6 CO₂ + 6 H₂O
b) This is a double displacement reaction of the general structure:
Salt 1 + Base 1 = Salt 2 + Base 2
The corresponding equation is:
Fe₂(SO₄)₃ + Ba(OH)₂ ⇒ BaSO₄ + Fe(OH)₃
First, we will balance Fe atoms by multiplying Fe(OH)₃ by 2 and S atoms by multiplying BaSO₄ by 3.
Fe₂(SO₄)₃ + Ba(OH)₂ ⇒ 3 BaSO₄ + 2 Fe(OH)₃
Then, we will get the balanced equation by multiplying Ba(OH)₂ by 3.
Fe₂(SO₄)₃ + 3 Ba(OH)₂ ⇒ 3 BaSO₄ + 2 Fe(OH)₃
Answer:
a.[tex]\bold{C_{6}H_{12}O_{6}\rightarrow 6CO_{2}+6H_{2}O}[/tex]
△H=−72 kcal
The energy required for production of 1.6 g of glucose is [molecular mass of glucose is 180 gm]
b.
[tex]\bold{Fe_{2}(SO_{4})_{3}+3Ba(OH)_{2}\rightarrow 3BaSO_{4}+2Fe(OH)_{3}}[/tex]
The iron(III) ions and chloride ions remain aqueous and are spectator ions in a reaction that produces solid barium sulfate.
Suppose you had a 2.4 g cracker burn down to 1.3 g, which raised the temperature of 50.1 g of water by 12.0 degrees Celsius. How many kilocalories of heat energy was released by the cracker (or absorbed by the water) per gram of cracker
Answer:
We know that the specific heat of water is:
c = 1cal/g*°C
This means, that we need 1 cal to increase the temperature of 1 gram of water by 1°C
Here, we increased the temperature of 50.1g of water by 12°C
Then the number of calories needed to do this is given by:
x = (mass of water in grams)*(how much increased the temp in °C)*1cal/g*°C
x = (50.1g*12°C)*1cal/g*°C = 601.2 cal
But we want this in Kcal, remember that:
1Kcal = 1000cal
Then:
601.2 cal = (601.2/1000) Kcal = 0.6012 Kcal
Now, for the cracker part, the energy was released by the amount of cracker that was burned.
The original mass was 2.4g
the final mass ios 1.3g
the difference is:
2.4g - 1.3g = 1.1g
This means that 1.1g was the burned mass.
The number of kilocalories of heat per gram released by the cracker is just:
n = (0.6012 Kcal)/(1.1 g) = 0.547 Kcal/g
0.547 kilocalories per gram.
