Answer:
because of the gravity of the earth
Two 4 kg blocks hang from a rope that passes over two frictionless pulleys . What is the tension in the horizontal portion of the rope if the blocks are not moving and the rope and the two pulleys have negligible mass?
The tension in the horizontal portion of the rope provided the blocks are not moving and the rope has negligible mass is 40 N
The tension in the rope is a pulling force that acts on the rope when the mass of 4kg is placed on each side of the two frictionless pulley.
According to Newton's second Law;
Force = (Tension) = mass × acceleration due to gravity
∴
We can say:
Tension = 4kg × 9.81 m/s²
Tension = 39.24 N
Tension = 40 N (to the nearest whole number)
Therefore, we can conclude that the tension in the horizontal portion of the rope is 40 N
Learn more about Newton's Law here:
https://brainly.com/question/3715235?referrer=searchResults
A 2kg water balloon is flying at a rate of 4m/s^2. With what force will it hit its target?
Explanation:
F=m×a
m=2kg
a=4m/s^2
F=2kg×4m/s^2
F=8N
A 2 kg water balloon is flying at a rate of 4 m/s². Force with which balloon will hit its target is 8 Newton.
What is force?A force is a push or pull upon an object resulting from the object's interaction with another object. Whenever there is body with some mass than there is force.
Given in the question mass and acceleration of balloon, force is given as
F = m*a
m = 2 kg
a = 4 m/s²
F = 2 kg×4 m/s²
F = 8 N
A 2 kg water balloon is flying at a rate of 4 m/s². Force with which balloon will hit its target is 8 Newton.
To learn more about force refer to the link:
brainly.com/question/13191643
#SPJ5
What is the scientific name for a push or a pull?
Answer:
thats a force
Explanation:
Answer:
force
Explanation:
the definition of a push or pull is force
What is the disappearance of a wave into a medium.
A. Signal
B. Amplitude
C. Absorption
D. Transmission
Answer:
Absorption
Explanation:
the disappearance of an EM wave into the medium. scattering – the spreading out of light rays in all directions because particles reflect and absorb the light.
Where does the energy released in a nuclear decay reaction come from
A. Electrons
B. Chemical bonds
C. Positrons
D. The binding energy of the nucleus
What happens to the sound an object makes when the speed of vibrations decreases (slow down)?.
I need help ASAP pls be right sn know what your doing
Answer: Biology
This is because the first two make no sense and physics is the study of matter and energy. Biology, however, studies the life of plants and animals, which can be used for renewable energy.
A two-dimensional crystal has a rectangular unit cell, with spacings between the centers of the atoms of 0.5 nm in one direction (e.g., the x direction), and 0.4 nm in the other direction (e.g., the y direction). Presuming that the crystal has 1000 unit cells in each direction, sketch a representative portion of the reciprocal lattice on a scale drawing, showing the dimensions, units, and directions (i.e., kx and ky)
So directly the cell density value in a rectangle is:
[tex]5*10^{17} cells/cm^{2}[/tex]
In this exercise, we must first calculate the area of the rectangle, remembering that you need to convert from nm to cm is:
[tex]A=B*H\\A=(0.4*10^{-7})*(0.5*10^{-7})= 2*10^{-15}[/tex]
Next, let's calculate the density from the calculated area:
[tex]\frac{N}{A} = \frac{1000}{2*10^{-15} } = 5*10^{17}[/tex]
In this way, the calculation represents that there is:
[tex]5*10^{17} cells/cm^{2}[/tex]
Learn more: brainly.com/question/18320053
When the sum of all the forces acting on a block.
Answer:
finish the question pls
Explanation:
Numerical
What mass must be suspended from a steel wire 2m long and 1mm diameter to stretch it by 1mm
By young’s theory
Answer:
Thus, 4 kg mass must be suspended from a steel wire 2 m long and 1 mm diameter to stretch it by 1 mm.
Explanation:
How much work is needed to stop a 1,110 kg car that is moving straight down the
highway at 59.0 km/h?
Answer:
382.74 kJ.
Explanation:
The work that must be done to stop an 1100 kg car travelling at 59 km/h is - 382.74 kJ.
The work needed to stop an 1100 kilograms car moving with a velocity of 59.0 km/hr would be 147.72 kilojoules.
What is work done?
The total amount of energy transferred when a force is applied to move an object through some distance
The work done is the multiplication of applied force with displacement.
Work Done = Force * Displacement
As given in the problem we have to find out how much work is needed to stop a 1,110-kilogram car that is moving straight down the highway at 59.0 kilometers/hour
the mass of the car = 1100 kilograms
the velocity of the car = 59 kilometers/hour
KE = 0.5mv²
=0.5×1100×(59×1000/3600)²
= 147.72 kilojoules
Thus, the work needed to stop an 1100 kilograms car would be 147.72 kilojoules
To learn more about work done from here, refer to the link;
brainly.com/question/13662169
#SPJ2
A 2kg body is moving a long a horizontal circular path of radius 2m with constant speed of 6m/s . what is the magnitude of the force acting on the body ?
1. You walk along a long straight school corridor for 55
m, then you turn around and walk 30 m in the
opposite. Finally, you turn again and walk 39 m in
the original direction and stop. What is your
displacement from your starting point?
Explanation:
14 m is the displacement and towards the north
A car travelled at a speed of 60 km/hr for thrice as long as it travelled at a speed of 40 km/hr. If the total distance it covered was 440 km, for how long did it travel at a speed of 60 km/hr
Answer:
it traveled 180km
Explanation:
why do we believe 90 percent of the mass of the milky way is in the form of dark matter?
Answer:
The orbital speeds of stars far from the galactic center are surprisingly high, suggesting that these stars are feeling gravitational effects from unseen matter in the halo.
PLEASE ANSWER NEED HELP!!!!!!!! PLEASE THE CORRECT ANSWER!!!!!!
Having good form is important when sitting but not when sleeping.
A.
True
B.
False
PLEASE NO LINKS
Answer:
B. false
Explanation:
Because good form is not going to mess up your sitting it might mess up the way you sleep Because you don't know if you going to hurt 8n the moring
Lacie kicks a football from ground level at a velocity of 13.9 m/s and at an angle of 25.0° to the ground. You have determined that the football would travel 15.1 m before landing.
How would this value change if the football was kicked at an angle of 35.0°?Complete all equations without rounding and then round to the nearest tenth at the end.
From edge
Answer:
like 23 or something
Explanation:
An irregularly shaped stone was lowered into a graduated cylinder holding a volume of water equal to 20L. The height of water rose to 30.2mL. If the mass of the stone was 25g what was its density?
Answer:
2.45 g/mL
Explanation:
(assuming that the original volume was 20 mL and not L)
Since you know the amount of water in the cylinder before and after you placed the rock in, you can subtract them to get the volume of the rock itself. [tex]30.2-20=10.2[/tex] mL.
To get the rock's density, use the equation [tex]d=\frac{m}{v}[/tex], where m is mass and v is volume.
[tex]d=\frac{25 g}{10.2mL}\\\\d=2.45 g/mL[/tex]
4. symbol for the gravitational force ?
Answer: G
Explanation:
Which of the following correctly describes the law of conservation of matter?
Group of answer choices
A.) Matter can only be created, but not destroyed in chemical equations
B.) Matter can neither be created nor destroyed during a chemical reaction
C.) Matter can be destroyed during a chemical reaction as long as it is created again in a different reaction
D.) Matter makes up 98% of stuff in the universe, so it has to be created and destroyed sometimes
Answer:
C
Explanation:
Tama Po yan don't worry
An object weighs 15 N in air and 13 N when submerged in mineral spirits, which has a density of 788 kg/m3. Determine the density of the object
The density of the object is 5911.94 kg/m³
An object's buoyancy is the upward force produced by a fluid in opposition to the weight of a partly or totally submerged object.
The buoyancy = weight of the object - weight in water
= 15 N - 13N
= 2 N
The buoyancy force can also be determined by using the expressed:
[tex]\mathbf{F_B = Volume (V) \times density ( \rho) \times g}[/tex]
[tex]\mathbf{2 = Volume (V) \times788 \ kg/m^3 \times9.8 }[/tex]
[tex]\mathbf{ Volume (V) = \dfrac{2}{ 788 \ kg/m^3 \times9.8 }}[/tex]
volume (v) = 2.589 × 10⁻⁴m³
Recall that:
The mass of an object can be estimated by using the formula:
Weight = mass × gravity
mass = Weight / gravity
mass = 15/9.8
mass = 1.5306 kg
The density of the object can now be calculated using the relation
Density = mass/volume
Density = 1.5306 kg / 2.589 × 10⁻⁴m³
Density = 5911.94 kg/m³
Learn more about buoyancy of an object here:
https://brainly.com/question/2205881?referrer=searchResults
What two things must be true about a sample in order to date it via radiocarbon dating by evaluating the decay of carbon-14
A. It must be inorganic and be at least 50,000 years old
B. It must be a marine animal and must have died recently
C. It must be organic and less than 50,000 years old
D. It must be a land animal and must have died recently
Carbon -14 is a dating method that is applicable to only samples of organic origin which are less than 50,000 years old.
When living things contain carbon- 14. Carbon - 14 is a radioactive isotope of carbon that decays by beta emission. As long as a plant or animal is alive, there is a balance between its intake and output of carbon -14.
However, when the plant or animal dies, this carbon - 14 begins to decay. The half life of carbon - 14 is 5700 years and it can be used to measure the age of materials or organic origin that are less than 50,000 years old.
Learn more: https://brainly.com/question/14281129
Help me quickly! please!!!
A cable pulls a car up a mountain with a force of 4 × 103 N at a vertical constant velocity of 5 m.s-1. It takes 5 minutes to reach the top.
(a)How much work is done in getting the car to the top?
(b)How much work would have been done if the vertical speed was 2,5 m.s-1?
(c)Calculate the power exerted on the cable car in those 5 minutes.
Answer:
(a) 6,000,000J
(b) 3,000,000J
(c) For A 20,000W
But for B 10,000W
The work done in getting the car to the top is equal to 6 ×10⁶ J. If the vertical speed is 2.5 m/s then, the work done will be 3 ×10⁶ J. The power exerted on the car is in 5 minutes is 20000 J/s.
What is work done ?In physics, work done is the dot product of force and displacement. Let w be the work done and F and ds be the force and displacement. Then
W = F.ds
It is given that the, the force of the cable is 4 × 10³ N. The velocity is 5 m/s and time is 5 minutes or 300 seconds. Now, the displacement is the product of time and velocity.
ds = velocity × time
= 300 s × 5 m/s
= 1500 m.
Thus the work done = F × ds
= 4 × 10³ N × 1500 m
= 6 ×10⁶ J .
If the velocity is reduced to half 2.5 m/s , then work done will be reduced to half as 3 ×10⁶ J.
Power is the rate of work done. Thus it is the ratio of work done to time. The power exerted on the car in 5 minutes = 6 ×10⁶ J /300s
= 20000 J/s
Hence, the power exerted on the cable car in 5 minutes is 20000 J/s.
To find more on work done, refer here:
https://brainly.com/question/3902440
#SPJ3
What is conduction?explain?
Answer:
Thermal conduction is the transfer of internal energy by microscopic collisions of particles and movement of electrons within a body. The colliding particles, which include molecules, atoms and electrons, transfer disorganized microscopic kinetic and potential energy, when joined known as internal energy.
Explanation:
sana makatulong
You get in your car after work and turn on the radio. What type of communication does the radio use?.
Answer:
Radio waves
Explanation:
The radio operates by the principles of radio wave.
Electromagnetic wave is a type of wave which does not require material medium for its propagation. A radio wave is an example of electromagnetic wave.
The radio operates in the principle of electromagnetic wave because it does not require material medium for its propagation and it has one of the longest frequency of electromagnetic spectrum.
Thus, we can conclude that the radio operates by the principles of radio wave.
Learn more about radio waves here: https://brainly.com/question/69373
How to calculate angular velocity.
Answer:
Answer below
Explanation:
We can rearrange this statement to get the angular velocity equation: = r v / |r|2, where all of these variables are vectors and |r| is the radius's absolute value. The angular velocity is really a pseudovector with a direction perpendicular to the plane of rotational movement.
The rotating movement of bodies is described by angular velocity. It determines how quickly they rotate around a central point. Rotations may be divided into two categories. The first explains the motion of an object's centre of mass around a certain point in space, which is referred to as an origin. Planets orbiting the Sun, for example, or an automobile exiting a roadway are two instances.
The first angular velocity equation is similar to the linear velocity equation: = (2 - 1) / t = / t, where 1 and 2 are two values of angles on a circle, and is the difference between them. t is the time it takes for the angle to shift. As you can see, there is a ratio of the positional change in a period for normal velocity, but we utilise angle instead of distance here. Definition of angular velocity using linear velocity The second angular velocity formula, v = r, may be obtained from the linear velocity and radius relationship using the cross product.
_______________________________________________________
(Hope this helps can I pls have brainlist (crown)☺️)
Help help fast please first answer gets brainiest also needs to be clearly stated
How much force is required to move a tractor 60m, when using 250J of work?
Answer:
Work done,W= 250J
Displacement , s = 60
We know that, Work done = Force x displacement
i.e , W = Fxs
250 J = F x 60m
F = 250/60
=4.16 N
Hence , 4.16 N of Force is applied on the body.
Please find attached photograph for your answer.
Hope it helps.
Do comment if you have any query.
How does water temperature affect density?
What can the magnetic fields influence?
A) It can cause objects to be pulled towards the magnet and pushed away from the magnet.
B) It only causes a repel force between the magnets.
C)It cause only an attraction force.
Explanation:
Magnetic fields are areas where an object exhibits a magnetic influence. The fields affect neighboring objects along things called magnetic field lines. A magnetic object can attract or push away another magnetic object. You also need to remember that magnetic forces are NOT related to gravity.
