Answer:
the answer would be B
Explanation:
The power from the charger use electricity and the electricity transforms to energy that can be moved
What is the answer to this question?
Answer:i think its d not sure tho
Explanation:
how many moles are there in 3.25x10^20 particles of lead oxide
Answer:
5.39 X 10-4
Explanation:
Try Checking It Out If It Right Or Not
A metal (FW 241.5 g/mol) crystallizes into a face-centered cubic unit cell and has a radius of 1.92 Angstrom. What is the density of this metal in g/cm3
This problem provides the molar mass and radius of a metal that has an FCC unit cell and the density is required.
Firstly, we begin with the formula that relates the aforementioned variables and also includes the Avogadro's number and the volume of the unit cell:
[tex]\rho=\frac{Z*M}{V*N_A}[/tex]
Whereas Z stands for the number of atoms in the unit cell, M the molar mass, V the volume and NA the Avogadro's number. Next, since FFC is able to hold 4 atoms and M and NA are given. Next, we calculate the volume of the atom in the unit given the radius in meters:
[tex]V=a^3=(2*1.92x10^-10m*\sqrt{2} )^3=1.60x10^{-28}m^3/atom[/tex]
And finally the required density in g/cm³:
[tex]\rho=\frac{4*241.5g/mol}{1.60x10^{-28}m^3/atom*6.022x10^{23}atom/mol} \\\\\rho=10025739g/m^3=10.03 g/cm^3[/tex]
Learn more:
https://brainly.com/question/12977980https://brainly.com/question/13110055What are the dependent and independent variables in this experiment? How are outside factors being controlled in this experiment to make sure that the results test only the dependent variable?
Answer:
1. An independent variable is manipulated, or changed. The dependent, or responding variable, changes based on the independent variable. The dependent variable is examined.
2. It is a controlled experiment.
Explanation:
In a controlled experiment all variables are kept the same, except for the one being tested, which is called the experimental variable , or independent variable . This group is the experimental group . The group that is not affected by the experimental variable is the control group .
Very often a graph will be used to analyze the results of the experiment. The independent/experimental variable is placed on the x-axis and the dependent variable is placed on the y-axis. The dependent variable is what is measured as a result of the application of the experimental variable.
A variable that is independent is altered. Based on the independent variable, the responding variable, or dependent variable, alters. Examining the dependent variable. The experiment is carefully controlled.
What is an independent variable ?In mathematical modeling, statistical modeling, and experimental sciences, there are dependent and independent variables. Dependent variables get their name because, during an experiment, their values are investigated under the presumption or requirement that they are dependent on the values of other variables due to some law or rule.
A variable that is independent is precisely what it sounds like. It is a stand-alone variable that is unaffected by the other variables you are attempting to assess. Age, for instance, could be an independent variable.
When doing an experiment, the independent variable is what you alter, and the dependent variable is what changes as a result of that change. This is an easy way to conceive of independent and dependent variables.
Thus, based on the independent variable, the responding variable, or dependent variable, alters.
To learn more about independent variable, follow the link;
https://brainly.com/question/967776
#SPJ2
What mass of aluminium chloride can be obtained when 0.48mols of aluminium is completely reacted with dilute hydrochloric acid?
Equation for this reaction:
2Al + 6HCl 2AlCl3 + 3H2
Answer:
Explanation:
we will do ratio method
Aluminum chloride : Aluminum
2 : 2
0.48 : x
(cross multiply)
0.48 x 2 / 2 = 0.48 moles of aluminum
mass = 1 mole of aluminum chloride x moles
mass = 133.33 x 0.48
mass = 63.9984g (round off) = 64g
I hope this helps.
Calculate the moles of HCl in 15 mL of a 0.50 M solution.
Explanation:
[tex]\tiny\implies Molarity = \dfrac{no. \: of \: moles \: of \: solute \times 1000}{volume \: of \: the \: solution \: (in \: ml)} [/tex]
[tex]\tiny\implies 0.50 = \dfrac{no. \: of \: moles \: of \: solute \times 1000}{15}[/tex]
[tex]\tiny\implies no. \: of \: moles \: of \: solute \times 1000 = 0.50 \times 15[/tex]
[tex]\tiny\implies no. \: of \: moles \: of \: solute \times 1000 = 7.5[/tex]
[tex]\tiny\implies no. \: of \: moles \: of \: solute = \dfrac{7.5}{1000} [/tex]
[tex]\tiny\implies \bf no. \: of \: moles \: of \: solute = 0.075 \: mol[/tex]
can someone tell me if I got this right? so I'm supposed to Match the vocabulary terms with their detentions
Answer:
I hope that help you
Explanation:
energy is change from one form to another called _energy conversion
energy can neither be created nor destroyed it can only be transformed from one form to another called --The law of conservation of energy
cause to change in form character or function called - convert
the last sentensce
energy transformation
What is the [H+] if pOH =9.50
will it be acid or basic?
Taking into account the definition of pH and pOH, the [H⁺] is 3.16×10⁻⁵ M and the solution will be acid.
First of all, pH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.
The pH is defined as the negative base 10 logarithm of the activity of hydrogen ions, that is, the concentration of hydrogen ions or H₃O⁺:
pH= - log [H⁺]= - log [H₃O⁺]
Similarly, pOH is a measure of hydroxyl ions in a solution and is expressed as the logarithm of the concentration of OH⁻ ions, with the sign changed:
pOH= - log [OH⁻]
The following relationship can be established between pH and pOH:
pH + pOH= 14
In this case, being pOH= 9.50, pH is calculated as:
pH + 9.40= 14
pH= 14 - 9.50
pH= 4.50
Replacing in the definition of pH the concentration of H⁺ ions is obtained:
- log [H⁺]= 4.50
Solving :
[H⁺]= 10⁻⁴ ⁵
[H⁺]= 3.16×10⁻⁵ M
The numerical scale that measures the pH of the substances includes the numbers from 0 to 14, being acidic solutions with a pH lower than 7, and basic those with a pH greater than 7. The pH = 7 indicates the neutrality of the solution.
In this case, the pH has a value of 4.50. So, the solution is acidic.
In summary, the [H⁺] is 3.16×10⁻⁵ M and the solution will be acid.
Learn more:
brainly.com/question/16032912?referrer=searchResults brainly.com/question/13557815?referrer=searchResults
Identify the strongest intermolecular force that is likely to affect each of the samples described below.
A mixture of chlorine gas (Cl) and fluorine gas (F): V London dispersion forces
COMPLETE
Tweaks
Menu
A mixture of hydrogen sulfide (H2S) and hydrogen chloride (HCI): V dipole-dipole interactions
Search
Selection
COMPLETE
Guess
this
hydrogen bonding
A mixture of water (H2O) and ammonia (NH3):
Answer:
A mixture of chlorine gas (Cl2) and fluorine gas (F2):
✔ London dispersion forces
Explanation:
What is the formula for sodium phosphate
Answer:
Explanation:
It''s chemical formula is Na3PO4
g Element X is an element in period 4. Identify X given that in the molecule XH3. It exhibits hybridization sp3. WHat is the element
Answer:
XF3 is our compound. X is unknown For the problem I am using the periodic table at this ...
Explanation:Solution for Element X is an element in period 3. Identify X given that in the molecule XH3, it exhibits hybridization sp2 . Indicate the symbol and not ...
Two or more than two atoms with different physical or chemical properties can not combine together to form an element. The element X in period 4 with covalency 3 is Arsenic (As).
What is element?Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same. The periodic table is divided into groups and periods. depending on the number of valence electrons and the number of outermost orbit respectively.
In the given compound XH[tex]_3[/tex], the covalency of X is 3, means the valence electrons in the outermost shell of element X is 3. The only group that have valence electron 3 is group 15 that is nitrogen family. In the fourth period of group 15 we find Arsenic element.
Therefore the element X in period 4 with covalency 3 is Arsenic (As).
To know more about element, here:
https://brainly.com/question/8460633
#SPJ2
Can anybody complete this for me?
Answer:
I wish i could
Explanation:
Which statement best describes mechanical energy?
A.the energy of heat and magnetism
B.the energy of electricity and motion
C.the energy of moving parts and motion
D.the energy of electricity and heat
Answer:
the answer is B.
Explanation:
your welcome
Answer:
the answer is B
Explanation:
i have the same exact questionn
Kinetic energy is described as - The answers are stored energy - destroyed energy movement or created energy if you answer the question I will give you the brainiest.
1Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.
Construct a conclusion using the claim, evidence and reasoning format to explain the typical properties observed by ionic and covalent compounds.
Answer:
The key to understanding why ionic and covalent compounds have different properties from each other is understanding what's going on with the electrons in a compound. Ionic bonds form when atoms have different electronegativity values from each other. When the electronegativity values are comparable, covalent bonds form.
But, what does this mean? Electronegativity is a measure of how easily an atom attracts bonding electrons. If two atoms attract electrons more or less equally, they share the electrons. Sharing electrons results in less polarity or inequality of charge distribution. In contrast, if one atom attracts bonding electrons more strongly than the other, the bond is polar.
Ionic compounds dissolve in polar solvents (like water), stack neatly on each other to form crystals, and require a lot of energy for their chemical bonds to break. Covalent compounds can be either polar or nonpolar, but they contain weaker bonds than ionic compounds because they are sharing electrons. So, their melting and boiling points are lower and they are softer.
I hope this helps have a great day :)
2. What pressure is required to compress 196.0 L of air at 1.00 atmosphere into a cylinder
whose volume is 26 0 L? (2 points)
Answer:
7.54 atmExplanation:
The required pressure can be found by using the formula for Boyle's law which is
[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]
where
P1 is the initial pressure
P2 is the final pressure
V1 is the initial volume
V2 is the final volume
From the question we have
[tex]P_2 = \frac{1 \times 196}{26} = \frac{196}{26} \\ = 7.538461...[/tex]
We have the final answer as
7.54 atmHope this helps you
an alloy composed of tin, lead, and cadmium is analyzed. the mole ratio of sn:pb is 2.73:1.00, and the mass ratio of pb:cd is 1.78:1.00. what is the mass percent composition of pb in the alloy
This problem is describe the mole-ratio composition of an allow composed by tin, lead and cadmium. Ratios are given as Sn:Pb 2.73:1.00 and Pb:Cd is 1.78:1.00, and we are asked to calculate the mass percent compositon of Pb in the allow.
In this case, according to the given information, it turns out possible realize that the following number of moles are present in the alloy, according to the aforementioned ratios:
[tex]2.73mol Sn\\\\1.00molPb\\\\\frac{1.00molPb*1.00molCd}{1.78molPb}= 0.562molCd[/tex]
Next, we calculate the masses by using each metal's atomic mass:
[tex]m_{Sn}=2.73mol*\frac{118.7g}{1mol}=324.05g\\\\ m_{Pb}=1.00mol*\frac{207.2g}{1mol}=207.2g\\\\m_{Cd}=0.562mol*\frac{112.4g}{1mol}=63.2g[/tex]
Thus, the mass percent composition of each metal is shown below:
[tex]\%Sn=\frac{324.05g}{324.05g+207.2g+63.2g} *100\%=54.5\%\\\\\%Pb=\frac{207.2g}{324.05g+207.2g+63.2g} *100\%=34.9\%\\\\\%Cd=\frac{63.2}{324.05g+207.2g+63.2g} *100\%=10.6\%[/tex]
So that of lead is 34.9 %.
https://brainly.com/question/19168996https://brainly.com/question/2578569Learn more:
classify each of the statements about gases as true or false. oxygen molecules at 25 celsius are moving faster than oxygen
Since gas molecules average velocity depends on temperature, oxygen molecules at 25°C are moving faster than oxygen molecules at 0 °C.
According to the kinetic theory of gases, the molecules of a gas are in constant random motion and collide frequently with each other and the walls of the container.
The average speed of gas molecules depends on temperature and molar mass as shown by the relation;
vrms = √3RT/M
The following statement are true among the options provided;
Oxygen molecules at 25°C are moving faster than oxygen molecules at 0 °C Gases exert pressure by colliding with container wallsThe following are false among the options provided;
All hydrogen molecules are moving with the same velocityNitrogen gas exerts more pressure than hydrogen gas because nitrogen molecules are heavier than hydrogen molecules. Nitrogen molecules remain suspended in the atmosphere because they are not attracted to Earth by gravitational forces.Learn more: https://brainly.com/question/6505878
Glucose can be found in foods like honey. What happens to glucose in the body?
OA. It goes through chemical reactions with carbon dioxide, which provides oxygen and energy for cells.
ОВ.
It goes through a physical change in the cell's nucleus to produce oxygen.
OC.
It uses carbon dioxide in the cell's nucleus to produce a larger sugar molecule.
OD.
It goes through chemical reactions with oxygen, which forms new molecules and provides energy for cells. Will Give Brainliest No
Links
Answer:It goes through chemical reactions with oxygen, which forms new molecules and provides energy for cells.
Please help asap chemistry worksheet doesn’t make sense
Answer:
dog dog im not gon hold u we kinda screwed
Which of the following best describes the scientific exploration of the atom?
How is hot spot and ring of fire similar
Answer:The plates are not fixed but are constantly moving atop a layer of solid and molten rock called the mantle. The Ring of Fire is a string of volcanoes and sites of seismic activity, or earthquakes, around the edges of the Pacific Ocean. ... A hotspot is a place in the middle of a tectonic plate where hot magma rises.
Explanation:
Can KI+Cl2 occur or not
Yes according to reliable sources.
lons form because the loss of one or more electrons makes
them less stable than their corresponding atoms; this state
requires more energy to maintain.
TRUE
FALSE
This statement lons form because the loss of one or more electrons makes them less stable than their corresponding atoms; this state requires more energy to maintain is FALSE.
An ion forms when an atom loses or gains one more electrons. This loss or gain of electrons causes the ion to gain the stable octet configuration. This stable octet configuration requires less energy to maintain than the corresponding atom.So, since the stable octet configuration of the ion requires less energy than the corresponding atom, the statement is false.
So, the statement lons form because the loss of one or more electrons makes them less stable than their corresponding atoms; this state requires more energy to maintain is FALSE.
Learn more about ions here:
https://brainly.com/question/3631272
formula of sodium bicarbonate
Answer:
NaHCO3
Explanation:
The three is small at the bottom at the end
The process of returning mines to their original state is called ________________________.
Answer:
Mine Reclamation.Explanation:
The process of returning mines to their original state is called Mine Reclamation. HOPE THIS HELPS :)Grace wanted to find out the best conditions for growing lettuce plants.
She took 4 trays and planted 8 lettuce plants in each.
The results of her investigation are shown below.
How many days did the investigation last?
Use the table to help you.
Explanation:
the investigation lasts for 7 days.
hope this helps you.
Because electron delocalization stabilizes a compound, if the only way electrons can be moved is away from the most electroneagtive atom, that is better than no electron delocalization at all.
a. True
b. False
As electron delocalization stabilizes the compound it is necessary that it takes place for compound to exist , hence the given statement is false.
What is a compound?Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.
Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:
1)Molecular compounds where in atoms are joined by covalent bonds.
2) ionic compounds where atoms are joined by ionic bond.
3)Inter-metallic compounds where atoms are held by metallic bonds
4) co-ordination complexes where atoms are held by co-ordinate bonds.
They have a unique chemical structure held together by chemical bonds .Compounds have different properties as those of elements because when a compound is formed the properties of the substance are totally altered.
Learn more about compounds,here:
https://brainly.com/question/13516179
#SPJ2
1 ton of methanol are accidentally discharged into a lake. By how much is the biological oxygen demand of this water increased
The biological Oxygen demand of the lake is increased by 1.5 ton.
Discussion:
The reaction of methanol with Oxygen is as follows;
2CH3OH + 3O2 ==> 2CO2 + 4H2O.In the reaction above; Since Methanol, CH3OH and Oxygen, O2 have the same molar mass; 32.
Therefore we can say since;
2 moles of CH3OH requires 3 moles of O2.
Therefore, 1 ton of methanol will require 1.5 ton of oxygen.
The biological Oxygen demand of the water is therefore increased by 1.5 ton as this is the amount of Oxygen consumed by the ethanol.
Read more:
https://brainly.com/question/13386150
7. What's the structure of methane, CH,? Is it polar or non-polar?
O A. Trigonal planar, polar
O B. Tetrahedral, polar
O C. Trigonal planar, non-polar
O D. Tetrahedral, non-polar
Answer:
The answer is D.
Explanation:
Methane (CH4) is a non-polar hydrocarbon molecule made of a single carbon atom and four hydrogen atoms. It is found in nature in the form of natural gas. It is non-polar because the difference in electronegativities between carbon and hydrogen is not sufficient to produce a polarized chemical connection between these two elements.
The methane molecule has a tetrahedral structure in terms of molecular geometry. Because the molecule is not planar, the angles between the H-C-H bonds are 109.5°, which is more than the 90° that they would be if the molecule were planar.
Explanation:
tetrahedral, non polar
