Answer:
Amount of oxygen needed is 5,000 liter
Explanation:
Given:
Percent of air in oxygen = 1%
Find:
Oxygen if 50 liter of wind
Computation:
Oxygen if 50 liter of wind = 50 liter wind[100% / 1% ]
Oxygen if 50 liter of wind = 50 liter wind[100]
Oxygen if 50 liter of wind = 50[100]
Oxygen if 50 liter of wind = 5,000
So,
Amount of oxygen needed is 5,000 liter
The most common carrier of communicable diseases are
a.cockroach
b.housefly
c.mosquito
d.spider
housefly
Explanation:
Because it one of the affective vector of disease carrier and it always roam towards wastes and dirty materials likely to get attracted . And it carries contagious disease from hospitals , infected patients , etc .
Lead is a toxic metal that affects the central nervous system. A Pb-contaminated water sample contains 0.0012 % Pb by mass. What volume of the water in milliliters contains 100 mg of Pb
Answer:
8.3 × 10³ mL
Explanation:
Step 1: Calculate the mass of water that contains 100 mg of Pb
The concentration of Pb in the sample is 0.0012% by mass, that is, there are 0.0012 g of Pb every 100 g of water. The mass of water that contains 100 mg (0.100 g) of Pb is:
0.100 g Pb × 100 g Water/0.0012 g Pb = 8.3 × 10³ g Water
Step 2: Calculate the volume corresponding to 8.3 × 10³ g of water
Since the solution is diluted, we will assume the density of the sample is equal than the density of water (1 g/mL).
8.3 × 10³ g × 1 mL/1 g = 8.3 × 10³ mL
The volume of the water in milliliters contains 100 mg of Pb is;
V = 8.3 × 10³ mL
Volume of SolutionWe are given the concentration of Pb in the sample as 0.0012% by mass.
That means that there are 0.0012 g of Pb in every 100 g of water.
Thus, the mass of water that contains 100 mg (0.100 g) of Pb is calculated as;
(0.100 g Pb × 100 g of Water)/0.0012 g of Pb = 8.3 × 10³ g of Water
Now, we know that the density of water (1 g/mL) but we are not given the density of the sample.
Thus, since the solution is diluted we can equally say that;
Density of sample = 1 g/mL
Formula for Volume is;
V = mass/density
Thus;
V = 8.3 × 10³ g/1 g/mL
V = 8.3 × 10³ mL
Read more about Volume of solution at; https://brainly.com/question/17055828
which states of matter can flow from one place to another
Answer:
Liquid
Explanation:
Quite an easy question!
Answer:
Liquid
Explanation:
I was passing by lol
Both aldehydes and ketones contain a carbonyl group a functional group with a carbon oxygen double bond, hence the carbonyl in aldehydes and ketones forms sp²hybridization.
Answer:
Both aldehydes and ketones contain a carbonyl group a functional group with a carbon oxygen double bond, hence the carbonyl in aldehydes and ketones forms sp²hybridization.
Explanation:
The structure of carbonyl group is -C=O-
The hybridization of carbon can be identified by couting the number of surrounding atoms.
In carbonyl compounds, carbon is directly bonded with three atoms.
One is oxygen, and the other two are other carbons.
With oxygen carbon has a double bond.
Hence, this three corresponds to sp2 hybridization.
Thus, the given statement is correct.
different oil refineries in UAE
Answer:
Petroleum refinery capacity in the UAE 2009-2018
In 2018, the total production capacities of all refineries in the UAE were 1.13 metric barrels per day. Total total production capacity of the al-Ruwais refinery in the United Arab Emirates was approximately 817,000 metric barrels per day.
How many moles of carbon are in the sample?
Answer:
12.01 grams per mole
Explanation:
theres no sample or example so if theres grams of Carbon, convert it to moles using 12.01g/mol
What pollutants can contribute to acid precipitation and how are these pollutants generated?
Answer:
I don't know I don't know about question but I can try to find it
Explanation:
I don't know about question but I can try to find it
describe the formation of ionic bonds in potassium chloride compound (5 marks)
Answer:
When the two atoms are in contact, potassium readily transfers its outer electron to chlorine which readily accepts it, resulting in both atoms achieving a state of eight outermost electrons. With this electron transfer, the ionic bond in KCl is formed.
Someone please do a True or false of all of these
Answer:
1. False
2. True
3. False
4. False
5. True
6. False
7. True
8. True
9. True
Hydrogen gas (H2) is a promising alternative to fossil fuels. How many molecules are present in 1.0 kg of hydrogen gas
Answer:
3.01×10²⁶ molecules
Explanation:
From the question given above, the following data were obtained:
Mass of H₂ = 1 Kg
Number of molecules =?
From Avogadro's hypothesis,
1 mole of H₂ = 6.02×10²³ molecules
But 1 mole of H₂ = 2 × 1 = 2 g
Now, we shall determine the number of molecules present in 1 Kg (i.e 1000 g) of H₂ as follow:
From Avogadro's hypothesis,
2 g of H₂ = 6.02×10²³ molecules
Therefore,
1000 g of H₂ = 1000 × 6.02×10²³ / 2
1000 g of H₂ = 3.01×10²⁶ molecules
Thus, the number of molecules present in 1 Kg (i.e 1000 g) of H₂ is 3.01×10²⁶ molecules
please help. need this asap!!
Answer:
E.....Na2I.,.
Explanation:
Cuz sodium has a Vallency..1......lodide has Vallency 2
1.25 X 10^24 molecules of chlorine gas react with sodium to form how many grams of sodium
chloride?
2Na + Cl2
--> 2NaCl
Answer:
241.28 g NaCl(s)
Explanation:
Given 1.25 x 10²⁴ molecules of Cl₂ = 1.25 x 10²⁴molecules Cl₂(g)/6.023 x 10²³ molecules/mole = 2.08 mole Cl₂(g)
2Na(s) + Cl₂(g) => 2NaCl(s)
excess 2.08mole ? mole
∴moles NaCl(s) formed from 2.08 moles Cl₂(g) = 2(2.08 mole NaCl(s))
= 4.16 mole NaCl(g) = 4.16 mole NaCl(s) x 58 g NaCl(s)/mole NaCl(s) = 241.28 g NaCl(s)
How many molecular of H2O and O2 are present in 8.5g of H2O2 ?
2H2O+O2--->2H2O2
8.5 gm H2O2=0.25 mole
hence H2O is also 0.25 mole i.e.4.5 gm
O2is 0.125 mole i.e.4 gm
Select the correct answer.
0.22 M
HCI
Unknown
LiOH
What is the concentration of the base (LIOH) in this titration?
1.0 ml
0.5 ml
Initial
burette
reading
Final
burette
reading
13.3 ml
18.5 ml
OA
0.16 M
ОВ.
0.15 M
OC. 0.22 M
OD
18 M
O E
0.5 M
Daset
Answer:
=0.15M
Explanation:
To get the moles of the unknown LiOH, calculate the number of moles of HCl in 12.3mL.
Using the stoichiometric coefficient, mole ratio 1:1.
This means that the number of moles is the same. This number of moles is contained in 18mL. Then Calculate the molarity (concentration) which is in 1000mL
See the explanation from the image I have shared with you for calculations.
How many moles of water vapor are formed. when 10 litres of butane gas c4h10 is burned in oxygen at STP
Using the idea of the molar volume of butane gas, we have 2.23 moles of water vapor.
What is a reaction equation?The term reaction equation shows the conversion of reactants to products. First of all, we must get down the reaction equation as follows;
C4H10(g) + 13/2O2(g) ----> 4CO2 (g) + 5H2O(g)
From the balanced reaction equation;
1 mole of butane gas yields 5 moles of water vapor. Since 1 mole of butane gas occupies 22.4 L. Hence;
22.4 L of butane yields 5 moles of water vapor
10 L of butane gas yields 10 L * 5 moles/22.4 L = 2.23 moles
Learn more about butane gas:https://brainly.com/question/6665698
Crystals of sodium chloride were prepared by the following method.
1 25.0 cm3
of dilute hydrochloric acid was accurately measured into a conical flask.
2 Aqueous sodium hydroxide was added until the solution was neutral. The volume of
sodium hydroxide added was measured.
3 The solution was evaporated and the crystals washed with approximately 15 cm3
of water.
Which row shows the pieces of apparatus used to measure the 25.0 cm3
of hydrochloric acid, the
volume of aqueous sodium hydroxide and the 15 cm3
of water?
Answer: the answer is C
IF U MIGHT NEED AN EXPLANATION FEEL FREE TO COMMENT
The laboratory equipment like the burette, pipette, and measuring cylinders are used in process of titration process. The solution of NaOH is added by the burette. Thus, option C is correct.
What is titration?Titration has been the analytical technique that uses the known and measured quantity of the solution to estimate the volume of another solution with an unknown volume and known molar concentration.
The laboratory equipment like burette, pipette, and measuring cylinders are used in measuring the volume in the titration process. The burette is filled with sodium hydroxide to measure its quantity.
The pipette is used to transfer the volume of the solution that is known (hydrochloric acid) and the measuring cylinder is used to measure the liquid (water) that is used in chemistry experiments.
Therefore, option C. pipette, burette, and measuring cylinder are the apparatus used in the titration process.
Learn more about titration, here:
https://brainly.com/question/10024565
#SPJ2
3. If there were multiple products comment on finding the mixture melting point of the products. Does your sample appear to be a mixture or pure
Answer:
If there were multiple products, we can take each product and mixed with a sample of a pure compound that we suspect might be the same as the product. Then, we taking the melting point of this mixture that contains one of our product and pure sample. Then, we can observe the change in melting point, if there is no change in melting point or the melting stays in the same range of the pure compound. Then, the that product along with the pure sample are actually the same compound, not a mixture of two compounds. However, if the melting point for our pure sample compound changed or didn't stay in the same range after the mixing with on of our products. then we can conclude that this product and the pure sample are completely different compound, and indeed they are a mixture.
1. A) Calculate DO of water at 25 0 C, P 0 = 1.01x10 5 Pa; given: water vapor pressure (25 0 C) is 3.2x10 3 Pa and Henry constant of oxygen in water is 1.3x10 -8 mol/l.Pa b) How's DO content changed as increase or decrease water temperature? Explain.
Answer:
cfvgbhnjmk,
Explanation:
An atom has9 electrons and 9 protons at the start. If it loses 2 electrons, what would the net charge on the atom be
Answer:
i hope it will help you
Explanation:
there will be 7 electrons and 9 protons will have 2+ charge.
7. (a) Using two examples, explain how covalent compounds are formed. [4 marks]
(b) State three physical properties of covalent compounds. [3 marks]
(c) Describe an experiment how you can carry out an experiment to investigate one of the properties mentioned above. [3 marks]
8. (a) Using two examples, explain how covalent compounds are formed. [14 marks]
(b) State three physical properties of covalent compounds.[3 marks]
Describe an experiment how you can carry out an experiment to investigate one of the properties mentioned above. [3 marks]
Answer; a) Covalent compound are formed when atoms of different molecules share electrons in order to be stable either by losing or gaining electrons
eg.. HCL hydrogen chloride , a chlorine atom has 7 electrons on its outer shell and hydrogen has 1 so when this two pair they become covalently bonded. chlorine shares one electron with the hydrogen atom ,thus to say both now have a stable arrangement of electron in their outer shell.
methane CH4 the carbon atom has 4 electrons and hydrogen has 1 so carbon would need 4 more and hydrogen would need 1 more so carbon pairs with 4 hydrogen atoms making it 8 and hydrogen 2 so they now have a stable arrangement ,thus the carbon atom shares with 4 hydrogen atoms.
b) some physical properties are
i)they have low melting and boiling points
ii)their insolubility in water
iii) they are non conductors of electricity
c) an experiment using their melting and boiling point
EXPERIMENT; lets use the covalent molecule carbon monoxide CO
when you apply heat and it tend to melt at a -199 degree celsius then it is a covalent molecule
and when it starts to boil at -191 degree celsuis then its sure a carbon monoxide covalent molecule
explanation; the reason for its low melting point and boiling point is because the attraction between the molecule is very low so it doesn't need much energy to break up the lattice between them.
HOPE THIS HELP if you need more explanation feel free to comment in the comment section
What type of a liquid will have a pH value equal to 7? (1 point)
How are carbon-based molecules suited for sustaining life?
[tex]\huge\fcolorbox{red}{pink}{Answer ♥}[/tex]
Life on Earth is based on carbon, likely because each carbon atom can form bonds with up to four other atoms simultaneously. This quality makes carbon well-suited to form the long chains of molecules that serve as the basis for life as we know it, such as proteins and DNA.
Hope it helps uh ✌️✌️✌️
What is the wavelength of a wave that has a frequency of 6.1 x 109 Hz ? c = λυ where c = 2.998 x 108 m/s
a. 20.4 m
b. 2.04 m
c. 0.49 m
d. 0.049 m
Answer:
Wavelength = 0.049 m
Explanation:
Given that,
The frequency of a wave,[tex]f=6.1\times 10^9\ Hz[/tex]
We need to find the wavelength of the wave. We know that,
[tex]c=f\lambda\\\\\lambda=\dfrac{c}{f}\\\\\lambda=\dfrac{2.998 \times 10^8}{6.1\times 10^9}\\\\\lambda=0.049\ m[/tex]
So, the wavelength of the wave is 0.049 m.
Which statement is the best description of a chemical bond
Answer:
What are your given options? I can't answer unless I know those :)
Explanation:
A 15.8 g sample contains 3.60 g F, 4.90 g H, and 7.30 g C. What is the percent composition of hydrogen in this sample?
Answer: 22.7848% F or 23%
Explanation: %F = 3.6g/15.8g • 100% = 22.7848% F
The percentage composition of hydrogen in the given sample is equal to 31%.
What is percentage composition?The percentage composition of a given compound can be described as the ratio of the quantity of each element to the total quantity of individual elements in the compound multiplied by 100. The quantity can be measured in terms of grams of the elements present in the sample.
The percent composition is expressed in its composition in terms of all the elements present. Thus, it helps in the chemical analysis of any given compound.
The percentage composition is expressed using the following formula,
Percentage composition of E = (E/T) × 100
Where E represents the total quantity of element E present in the compound and T represents the total quantity of all the elements present in the compound.
Given, the mass of the F, H, and C is 3.60g, 4,90 g, and 7.30 g respectively.
The total mass of the given sample = 15.8 g
The mass of the hydrogen in the sample = 4.90 g
The percent composition of H = (4.90/15.8) × 100 = 31 %
Therefore, the percent composition of hydrogen in this sample is 31%.
Learn more about percent composition, here:
https://brainly.com/question/11952337
#SPJ2
In an electrically neutral atom, the number of
protons equals the number of neutrons.
protons equals the number of electrons.
neutrons equals the number of electrons.
A. Protons equals the number of neutrons
B. Protons equal the number of electrons
C. Neutrons equals the number of electrons
Answer: B
Answer:
B
Explanation:
because protons have a +1 charge and electrons have a -1 charge, so if an atom is neutral it must have the same amount of protons and neutrons
explain with example the need of standard measurement system
Answer:
A standard system of measurement is very important because it helps us from making mistakes at the moment of doing calculations and correctly working...
Answer:
A standard measurement system is important because it allows scientists to compare data and communicate with each other about their results. Metric System – is a measurement system based on the number 10.
PLEASE HELP ASAP!!!!!!!!
Answer:
ouch......it's kinda a practical question..
Answer: ?
Explanation: what was the answer?
Metals like potassium and sodium are kept in paroffin oil. Why?
Answer:
because they are high reactive to the air thats why we keep them in paroffin oil
Which is TRUE about the structure of the atom? Select all that apply.
a
the densest part of the atom is the nucleus of the atom
b
the outermost part of the atom is where electrons are found
c
the nucleus of the atom is where protons and neutrons are found.
d
the outer part of the atom is called the antinucleus.
e
the nucleus of the atom has a diameter of about 10-10 m.
