The process of adjusting a job or work environment to fit the needs of disabled employees is called reasonable accommodation. So, the correct option is A.
What is reasonable accommodation?Reasonable accommodation refers to the procedure of adapting job conditions or the office to meet the needs of employees who have disabilities. The aim of reasonable accommodation is to offer disabled employees with equal opportunities at work.
To help disabled employees, there are many forms of reasonable accommodations. Some instances include providing appropriate computer equipment or devices, modifying the workspace, and modifying the work schedule or work environment to meet their needs.
A qualified worker with a disability is entitled to fair accommodation. The federal government requires employers to provide reasonable accommodations to staff with disabilities under the Americans with Disabilities Act (ADA).It is important to note that reasonable accommodation does not necessitate lowering efficiency or work requirements for individuals with disabilities.
Learn more about Reasonable accommodation at
https://brainly.com/question/16738385
#SPJ11
Sheffield Corp. took a physical inventory on December 31 and determined that goods costing $208,000 were on hand. Not included in the physical count were $22,000 of goods purchased from Wildhorse Co., FOB, shipping point, and $24,500 of goods sold to Waterway Industries for $35,000, FOB destination. Both the Wildhorse purchase and the Waterway sale were in transit at year-end. What is the ending inventory
Sheffield Corp. ending inventory, based on physical inventory take on December 31 is $219,500.
Sheffield Corp. took a physical inventory on December 31 and determined that goods costing $208,000 were on hand. Not included in the physical count were $22,000 of goods purchased from Wildhorse Co., FOB, shipping point, and $24,500 of goods sold to Waterway Industries for $35,000, FOB destination.
Both the Wildhorse purchase and the Waterway sale were in transit at year-end.
The ending inventory of Sheffield Corp. can be calculated as follows:
Ending inventory = Physical inventory + Purchase in transit - Sales in transit
In the given case,
Physical inventory = $208,000
Purchase in transit = $22,000
Ending inventory = $208,000 + $22,000 - ($35,000 - $24,500)
Ending inventory = $208,000 + $22,000 - $10,500
Ending inventory = $219,500
Therefore, the ending inventory of Sheffield Corp on December 31. is $219,500.
Learn more about Inventory:
https://brainly.com/question/24868116
#SPJ11
a mortgage with low initial payments that increase over time without ever leveling off is a a. shared-appreciation mortgage. b. growing-equity mortgage. c. graduated payment mortgage. d. second mortgage.
A graduated payment mortgage is a mortgage with low initial payments that increase over time without ever leveling off. The answer is option c. graduated payment mortgage.
What is a graduated payment mortgage?A graduated payment mortgage is a mortgage that starts with low initial payments and then rises over time without ever leveling off. The aim of this type of mortgage is to allow borrowers to make smaller payments when they first purchase the property and then gradually increase their payments as their income grows. The rate at which the payments rise is determined ahead of time and is typically much quicker than it would be for a traditional mortgage.
One of the advantages of a graduated payment mortgage is that it allows homebuyers to purchase a property that they may not be able to afford if they had to pay the full monthly payment from the start. The gradual rise in payments also takes into account the potential increase in a borrower's income over time, making it more feasible to pay off the loan. However, since the payments never level off, this type of mortgage will end up costing the borrower more over time than a traditional mortgage.
Learn more about graduated payment mortgage here: brainly.com/question/29566590
#SPJ11
the ledger of mai company includes the following accounts with normal balances as of december 31: retained earnings $10,700; dividends $1,650; services revenue $30,000; wages expense $16,900; and rent expense $5,000.
Prepare the necessary closing entries from the available information at December 31.
The necessary closing entries are as follows: Particulars Debit, Credit Income summary account $30,000 Services revenue $30,000 Wages expense $16,900 Rent expense $5,000 Income summary account $21,900 Income summary account $8,100 Retained earnings account $8,100 Dividends account $1,650 Retained earnings account $1,650
In order to prepare the necessary closing entries from the available information at December 31, we must follow certain steps which are as follows:
Step 1: Firstly, we need to transfer the balances of revenue accounts into the income summary account by making a debit entry in the income summary account equal to the total amount of revenue accounts and crediting the total amount of revenue accounts with individual accounts. Here, the revenue account is Services revenue.Particulars Debit Credit Income summary account $30,000 Services revenue $30,000
Step 2: Then, we need to transfer the balances of expense accounts into the income summary account by making a credit entry in the income summary account equal to the total amount of expense accounts and debiting the total amount of expense accounts with individual accounts. Here, the expense accounts are Wages expense and Rent expense.Particulars Debit Credit Wages expense $16,900 Rent expense $5,000 Income summary account $21,900
Step 3: Now, we need to transfer the net income/loss to the retained earnings account by making a credit entry in the income summary account and debiting the retained earnings account. Here, the income summary account has a credit balance of $8,100, which means that the company has net income of $8,100.Particulars Debit Credit Retained earnings account $8,100 Income summary account $8,100
Step 4: Then, we need to transfer the dividends account balance to the retained earnings account by making a debit entry in the retained earnings account and crediting the dividends account.Particulars Debit Credit Dividends account $1,650 Retained earnings account $1,650
For more questions on Dividends
https://brainly.com/question/3198926
#SPJ11
A memorandum on the sale of goods that does not indicate the _____ of goods to be sold will not satisfy the UCC's writing requirement.
A. quality
B. quantity
C. delivery
D. cost
A memorandum on the sale of goods that does not indicate the quantity of goods to be sold will not satisfy the UCC's writing requirement. The correct answer is option B.
A Memorandum, also known as a Confirmation, is a written confirmation of a contract for the sale of goods. It's a brief statement of the terms of the contract, including the price, quality, and type of goods.
The Uniform Commercial Code (UCC) is a set of laws governing commercial transactions that set out the duties and rights of parties involved in commercial transactions.
The UCC has a writing provision that necessitates that certain contracts be in writing.
Thus, a memorandum on the sale of goods does not indicate the quantity of goods. Option B is correct.
Learn more about Memorandum here:
brainly.com/question/11736904
#SPJ11
congestion effects often result when a key resource becomes increasingly scarce with the arrivals of more and more users.T/F
True. Congestion effects often result when a key resource becomes increasingly scarce with the arrivals of more and more users. This is because the available resources are no longer able to satisfy the demands of all the users. As a result, the users must compete for the limited resources, which leads to a decrease in the overall efficiency of the system.
In economics, this is known as the “tragedy of the commons” – the idea that, when resources are shared by a large number of users, there is a tendency for those resources to be overused and depleted. When resources become scarce, congestion effects start to occur. For example, if too many people are using a public park, the amount of available space becomes limited and the quality of the park experience decreases. Similarly, when too many people are using a shared network connection, congestion can occur and the speed and quality of the connection can suffer.
Congestion effects can also arise when resources become physically limited. For example, when more and more cars are added to a road, traffic congestion can occur as the number of available lanes cannot satisfy the demand. Congestion effects can also occur in the energy sector, when demand for electricity increases but the power grid cannot cope with the amount of energy being used.
Overall, congestion effects often result when a key resource becomes increasingly scarce with the arrivals of more and more users.
To know more about congestion effects refer here :
https://brainly.com/question/1035702
#SPJ11
To decrease the costs of operating a lock in a large river, a new system of operation is proposed. The system will cost $830,000 to design and build. It is estimated that it will have to be reworked every 10 years at a cost of $120,000. In addition, an expenditure of $80,000 will have to be made at the end of the fifth year for a new type of gear that will not be available until then. Annual operating costs are expected to be $70,000 for the first 15 years and $100,000 a year thereafter. Compute the capitalized cost of perpetual service at i=7%.
The capitalized cost of perpetual service is $4,201,394.23 at i=7%.
To compute the capitalized cost of perpetual service, we need to find the present value of all future costs associated with the system.
Step 1: Calculate the present value of the initial cost of designing and building the system:
PV of initial cost = $830,000
Step 2: Calculate the present value of the recurring maintenance costs:
PV of recurring maintenance costs = $120,000 / 0.07 = $1,714,285.71
Step 3: Calculate the present value of the gear replacement cost at the end of the fifth year:
PV of gear replacement cost = $80,000 / 1.07^5 = $58,099.47
Step 4: Calculate the present value of the annual operating costs for the first 15 years:
PV of annual operating costs for first 15 years = $70,000 x [(1 - (1 / 1.07^15)) / 0.07] = $579,963.94
Step 5: Calculate the present value of the annual operating costs after the first 15 years:
PV of annual operating costs after 15 years = $100,000 / (0.07 - 0.03) / 1.07^15 = $1,019,045.11
Step 6: Add up all the present values to find the capitalized cost of perpetual service:
Capitalized cost of perpetual service = PV of initial cost + PV of recurring maintenance costs + PV of gear replacement cost + PV of annual operating costs for first 15 years + PV of annual operating costs after 15 years
= $830,000 + $1,714,285.71 + $58,099.47 + $579,963.94 + $1,019,045.11
= $4,201,394.23
Therefore, the capitalized cost of perpetual service is $4,201,394.23 at i=7%.
To know more about perpetual service, viist:
https://brainly.com/question/15062534
#SPJ1
which aspect of preparing an accounting worksheet typically requires the greatest involvement by the accountant?
Adjustments is an aspect of preparing an accounting worksheet typically requires the greatest involvement by the accountant. It is one of the most crucial task of an accountant.
Adjustments are accounting entries made at the end of the accounting period to adjust accounts for the effects of internal and external events that have not been recorded. They are necessary to ensure that the financial statements are accurate and complete.
Adjustments are classified into two types, namely accruals and deferrals. Accruals are revenues or expenses that have been earned or incurred but not yet recorded, while deferrals are revenues or expenses that have been recorded but not yet earned or incurred.
However, it is important to take the time to ensure that the financial statements are accurate, as errors or omissions can lead to serious consequences for the organization, such as legal problems or financial problems.
Know more about financial statements here:
https://brainly.com/question/14951563
#SPJ11
determine the ror for a project that has an initial cost of $82,000 and would provide positive cash flows of $12,000 the first year, $14,000 the second year, $16,000 the third year, $18,000 the fourth year, $20,000 the fifth year, and $22,000 the sixth year.
The IRR of the project is 17.6% for the rate of return (ROR) of a project that has an initial cost of $82,000 and would provide positive cash flows of $12,000 the first year, $14,000 the second year, $16,000 the third year, $18,000 the fourth year, $20,000 the fifth year, and $22,000 the sixth year.
By using the formula for calculating Internal Rate of Return (IRR).
IRR is the discount rate that makes the net present value (NPV) of all cash flows from a particular project equal to zero.
The formula for calculating IRR is:
[tex]IRR = R + [(FV / PV) * (1 + R) ^ n - 1] / [(1 + R) ^ n - 1][/tex]
Where:
In this case, we have an initial cost of $82,000, which is the present value (PV).
The future value (FV) is the sum of all the cash flows,
which is $82,000 + $12,000 + $14,000 + $16,000 + $18,000 + $20,000 + $22,000 = $144,000.
And the number of periods (n) is 6.
[tex]IRR = R + [(144,000 / 82,000) * (1 + R) ^ 6 - 1] / [(1 + R) ^ 6 - 1][/tex]
IRR=17.6
To learn more about IRR here:
https://brainly.com/question/7920964#
#SPJ11
a country that alters the demographic of its workforce in a manner that increases the labor force, such as by raising the legal minimum retirement age, is likely to experience? a sustainable, high income growth rate b.more productive workers in all facets of the economy c.All of these are true
The country that alters the demographic of its workforce in a manner that increases the labor force is likely to experience a sustainable, high-income growth rate. (option a)
When a country increases the size of its labor force, it can potentially increase its economic output and productivity, which can lead to higher incomes and growth rates. This is because a larger labor force can produce more goods and services, and can help to offset the effects of an aging population or declining birth rates.
Raising the legal minimum retirement age can help to increase the labor force by encouraging older workers to continue working, which can help to offset the effects of an aging population. This can lead to a more sustainable and productive workforce, which can contribute to higher economic growth rates and incomes over the long term.
Therefore, option (a) "a sustainable, high-income growth rate" is the most likely outcome for a country that alters the demographic of its workforce in a manner that increases the labor force, such as by raising the legal minimum retirement age.
Learn more about workforce here:
https://brainly.com/question/30033852
#SPJ11
which of the following is a defense under strict products liability? question 37 options: rescission comparative responsibility contributory negligence comparative fault assumption of the risk
The defense under strict product liability is the assumption of the risk.
What is strict product liability?Strict product liability is a legal doctrine that holds manufacturers, distributors, and sellers liable for any injuries or damages caused by their defective products without requiring the plaintiff to prove negligence or fault on their part. It is an essential consumer protection tool that incentivizes manufacturers to make safe products by holding them accountable for any defects or hazards that they produce.
Strict product liability holds the seller of a product strictly liable for any damages or injuries caused by the product, regardless of the seller’s level of fault or negligence. The assumption of the risk defense states that the plaintiff was aware of the risks and chose to use the product anyways, thus releasing the seller from liability.
Learn more about the assumption of the risk here:
brainly.com/question/21897362
#SPJ11
consider a risky portfolio. the end-of-year cash flow derived from the portfolio wits be either $40,000 or $180,000, with equal probabilities of 0.5. the alternative riskless investment in t-bills pays 4%. if you require a risk premium of 10%, how much will you be willing to pay for the portfolio? a) $57230 b) $28704 c) $75000 d) $96491
The amount you would be willing to pay for the portfolio is: $96,491. The correct option is D.
This can be calculated as follows:
The expected end-of-year cashflow from the risky portfolio is $110,000, that is [(40,000 x 0.5) + (180,000 x 0.5)].
The expected return from the riskless investment in T-bills is 4%, which equals $4,400 that is [(100,000 x 0.04)].
The risk premium required is 10%, so the expected return from the risky portfolio must be $14,400 that is [(100,000 x 0.10)].
Therefore, the amount you are willing to pay for the portfolio is $96,491 that is [(110,000 - 4,400) / 0.10)].
To know more about portfolio, refer here:
https://brainly.com/question/14934624#
#SPJ11
true or false when a provider has market dominance, and hence can set its own prices (within reason), it is called a price taker.
The statement "when a provider has market dominance, and hence can set its own prices (within reason), it is called a price taker" is false because that is called a price setter, not a price taker.
What is a price setter?A price setter is a business or industry that has control over the market price of goods or services. This is achieved through the use of monopolistic competition, oligopoly, or a monopoly. In an oligopoly, for example, the top four firms account for 80% of the market. These businesses have considerable power over the market since their pricing and output strategies influence market conditions. The company can set its prices above those of its competitors due to its monopoly position. This will be to maximize profits by charging the highest price that consumers are willing to pay.
What is a price taker?A price taker, on the other hand, is a firm or industry that accepts the market price determined by supply and demand forces. Small businesses and startups are more likely to be price takers since they lack market power to set prices. The market price is the going rate for a product or service. Businesses that do not have a monopoly or oligopoly position are price takers, and they must accept the market price. They have no influence over the market price since their output is minor, and they must accept the market price to be competitive.
What is market dominance?Market dominance is when a company or group of firms controls a significant portion of the market. A company that holds a significant portion of the market may have an unfair advantage over its competitors, which can lead to a monopolistic or oligopolistic market. When a company has market power, it can charge higher prices or reduce product quality without fear of losing customers. Governments frequently take measures to promote competition and prevent businesses from dominating the market, to protect consumers from paying excessive prices.
Learn more about price setter here: https://brainly.com/question/10572004
#SPJ11
which of the following best defines confidentiality in context with information and data? group of answer choices the certainty that information is accurate the confirmation that a company will not sell your information to others the ability to limit access to information to a certain set of users the reliability of access to information
Confidentiality refers to the ability to limit access to information to a certain set of users. It ensures that only those with proper authorization can view the data.
This is done to protect the integrity and security of the information and data, as well as ensure that the information is not misused or stolen. Confidentiality is often used in a legal context, such as to protect trade secrets or to ensure the privacy of individuals and businesses.
Confidentiality is key when it comes to sensitive information and data, such as financial records or health records. It is also used in other areas, such as when dealing with private documents or confidential agreements.
Confidentiality is also important when it comes to communication.There are various ways to protect confidential information, such as through the use of secure servers and encryption.
Know more about Confidentiality here:
https://brainly.com/question/31139333
#SPJ11
Which of the following statements about demand is correct?a. A change in the price of bicycles will not lead to a shift of the demand curve for bicycles.b. A change in the price of automobiles will lead to a shift of the demand curve for motorcycles.c. A change in demand is equivalent to a movement along a given demand curve.d. When price falls, so does the quantity demanded.e. When the demand curve shifts to the right, so will the supply curve.
A statement that is true about demand is a. A change in the price of bicycles will not lead to a shift of the demand curve for bicycles.
In economics, demand is referred to as the number of goods and services that consumers want to buy at different prices. The demand curve indicates the relationship between the price of a commodity and the amount demanded. A downward-sloping demand curve represents a demand relationship of an inverse nature.
There are several factors that affect demand, and these factors are enumerated below:
Prices of related commoditiesIncomeConsumer preferences and tastesFuture expectationsNumber of consumersPrice levelThe price of a commodity is the value that consumers are willing to pay to purchase it. The price of a good is generally determined by its supply and demand. When the supply of a commodity is high, its price decreases; and when the demand for a commodity is low, its price decreases.
There are several factors that affect price, and these factors are enumerated below:
Cost of productionLevel of competitionProduct demand and supplyMarket locationTax policiesInflationLevel of technology used.Time of yearNatural disasters or other forces of natureChanges in interest rates, etc.So, the true statement is Option a. A change in the price of bicycles will not lead to a shift of the demand curve for bicycles
To know more about demand curve, visit: https://brainly.com/question/1139186
#SPJ11
Which of the following statements is CORRECT? a. Since the ROA measures the firm's effective utilization of assets without considering how these assets are financed, two firms with the same EBIT must have the same ROA
b. Suppose a firm wants to maintain a specific TIE ratio. It knows the amount of its debt, the interest rate on that debt, the applicable tax rate, and its operating costs. With this information, the firm can calculate the amount of sales required to achieve its target Tie ratio, c. Suppose ali firms follow similar financing policies, face similar risks, have equal access to capital, and operate in competitive product and capital markets. However, firms face different operating conditions because, for example, the grocery store industry is different from the airtime industry. Under these conditions, firms with high profit margins will tend to have high asset turnover ratios, and firms with low profit margins will tend to have low turnover ratios. d. Klein Cosmetics has a profit margin of 5.0, a total assets turnover ratio of 15 times, no debt and therefore an equity multiplier of 1.0, and an ROE of 75%. The CFO recommends that the firm borrow funds using long-term debt, use the funds to buy back stock and raise the equity multiplier to 20. The size of the firm cassets) would not change. She thinks that operations would not be affected, but interest on the new debt would lower the profit margin to 4,5%. This would probably not be a good move, as it would decrease the ROE from 7.5% to 6.5% e. Even though Firm A's current ratio exceeds that of Firm B, Firm O's quick ratio might exceed that of A. However, if A's quick ratio exceeds B's, then we can be certain that A's current ratio is also larger than B's
The correct statement is: c. Suppose all firms follow similar financing policies, face similar risks, have equal access to capital, and operate in competitive product and capital markets.
However, firms face different operating conditions because, for example, the grocery store industry is different from the airtime industry. Under these conditions, firms with high-profit margins will tend to have high asset turnover ratios, and firms with low-profit margins will tend to have low turnover ratios.
Explanation:
a. This statement is incorrect because ROA does not solely depend on EBIT, but also on the amount of assets employed by the firm, which may differ between two firms with the same EBIT.
b. This statement is incorrect because the TIE ratio is calculated as EBIT/Interest Expense, and the firm cannot determine the required sales to maintain a specific TIE ratio without knowing its expected EBIT.
d. This statement is incorrect because the CFO's recommendation to increase the equity multiplier by using debt to buy back stock would increase the financial risk of the firm and decrease its ROE, contrary to what is stated.
e. This statement is partially correct. The quick ratio considers only the most liquid current assets, whereas the current ratio considers all current assets.
Therefore, it is possible for Firm A to have a higher current ratio than Firm B but a lower quick ratio. However, if Firm A's quick ratio is higher than Firm B's, then it is certain that Firm A's current ratio is also higher than Firm B's, as the quick ratio is a subset of the current ratio.
You can read more about capital at https://brainly.com/question/15300072
#SPJ11
15-a. What is the total cost to be accounted for? 15-b. What is the total cost accounted for? a. $ Total cost to be accounted for Total cost accounted for 357,915 357,915 b. $ Clopack Company manufactures one product that goes through one processing department called Mixing. All raw materials are introduced at the start of work in the Mixing Department. The company uses the weighted average method of process costing. Its Work in Process T-account for the Mixing Department for June follows (all forthcoming questions pertain to June): June 1 balance ? Materials Direct labor Overhead June 30 balance Work in Process-Mixing Department 28,000 Completed and transferred to Finished Goods 151,215 96,500 114,000 ? The June 1 work in process inventory consisted of 4,300 units with $15,240 in materials cost and $12,760 in conversion cost. The June 1 work in process inventory was 100% complete with respect to materials and 60% complete with respect to conversion. During June, 36,800 units were started into production. The June 30 work in process inventory consisted of 9,000 units that were 100% complete with respect to materials and 50% complete with respect to conversion.
The total cost to be accounted for is $357,915 and the total cost accounted for is also $357,915.
The June 1 work-in-process inventory consists of 4,300 units with $15,240 in materials cost and $12,760 in conversion cost, making the total cost of the June 1 inventory $28,000 ($15,240 + $12,760).
During June, 36,800 units were started into production, costing a total of $151,215 ($114,000 for overhead + $37,215 for materials + $0 for direct labor).
The June 30 work-in-process inventory consists of 9,000 units with $18,000 in materials cost and $9,000 in conversion cost, making the total cost of the June 30 inventory $27,000 ($18,000 + $9,000).
Adding together the June 1 and June 30 Work in Process inventory totals gives us the total cost to be accounted for, which is
$357,915 ($28,000 + $151,215 + $27,000 = $357,915).
Since the Completed and Transferred to Finished Goods was the same as the total cost to be accounted for, the total cost accounted for is also $357,915.
To learn more about “total cost” refer to the https://brainly.com/question/25109150
#SPJ11
Chang, the founder of a multinational corporation, believes that his business should mainly focus on the benefit of those people who own its stock. In this scenario, he most likely follows _______, a model of business management.
a. Stakeholders model
b. Shareholders primacy
c. Customer value
Option B). The model of business management that Chang is most likely following if he believes that his business should mainly focus on the benefit of those people who own its stock is "Shareholder primacy."
What is Shareholder Primacy?b The shareholder primacy model of business management is a management model that emphasizes the interests of shareholders over the interests of other stakeholders, such as employees, customers, and the general public, who are seen as secondary. The goal of a company following this model is to maximize shareholder wealth, which is accomplished by maximizing profits, increasing share prices, and paying dividends to shareholders. Why Shareholder Primacy is important? Shareholder primacy can be beneficial in some circumstances, such as when shareholders are actively involved in the business and have a long-term perspective. However, it can be detrimental in other circumstances, such as when shareholders prioritize short-term profits over long-term growth or when they engage in unethical or illegal activities to boost share prices. Therefore, the shareholder primacy model of business management has been the subject of debate in recent years, with some arguing that it needs to be revised to better balance the interests of all stakeholders.
For more such questions on Shareholders
https://brainly.com/question/28452798
#SPJ11
Chang's belief that his business should mainly focus on the benefit of those people who own its stock suggests he follows the Shareholders Primacy model of business management.
This model assumes that the primary purpose of a business is to increase shareholder wealth, and all decisions should be based on this goal. This model encourages businesses to maximize profits, often by cutting costs and increasing efficiency, while maintaining a focus on long-term growth and sustainability.
It also encourages businesses to have a more disciplined approach to capital allocation, using resources in a way that will generate the greatest return for shareholders.
This model seeks to ensure that the interests of shareholders are maintained and that their investments are managed in their best interests. As such, it typically involves strategies and tactics that focus on profit maximization, cost cutting, and increasing shareholder value.
Know more about Shareholders here
https://brainly.com/question/19162424#
#SPJ11
The amount a person would have to deposit today to be able to take out $600 a year for 7 years from an account earning 6 percent. (Round time value factor to 3 decimal places and final answer to 2 decimal places.)
The amount that needs to be deposited today to be able to withdraw $600 a year for 7 years at an annual interest rate of 6% is $3,349.43.
We can use the present value formula to calculate the amount that needs to be deposited today to be able to withdraw $600 a year for 7 years at an annual interest rate of 6%:
PV = PMT x (1 - (1 + r)⁻ⁿ) / r
where PV is the present value, PMT is the annual payment, r is the annual interest rate, and n is the number of years.
Substituting the given values, we get:
PV = $600 x (1 - (1 + 0.06)⁻⁷) / 0.06
PV = $3,349.43
Hence, the person needs to deposit $3,349.43
Learn more about present value here:
https://brainly.com/question/20557642
#SPJ11
because of their supposed performance standing committees such as a safety committee and a product committee are not considered true teamsTrueFalse
The statement “because of their supposed performance standing committees such as a safety committee and a product committee are not considered true teams” is true.
Committees are different from teams because they are formed to achieve specific goals and objectives that are often unrelated to the overall mission and purpose of the organization. Although committees are composed of people who work together towards a common goal, they are not considered true teams because they do not have the same level of interdependence, collaboration, and commitment as teams do.
A committee is formed to investigate a particular issue, make recommendations, and then disband once the work is complete. This is different from teams, which are formed to achieve a long-term goal and work together to achieve that goal. Teams are more collaborative, with each member having a specific role to play in achieving the team's objectives. Team members are also interdependent, relying on each other to accomplish the team's goals. This level of interdependence and collaboration is absent in committees.
Committees are more focused on individual performance than team performance. Members of a committee are often selected based on their expertise or knowledge in a particular area, and their primary responsibility is to provide input and recommendations on the issue at hand. Members of a team, on the other hand, are selected based on their ability to work collaboratively towards achieving the team's objectives.
In conclusion, standing committees such as safety committees and product committees are not considered true teams because they are formed to achieve specific goals and objectives that are often unrelated to the overall mission and purpose of the organization. Committees are more focused on individual performance than team performance and do not have the same level of interdependence, collaboration, and commitment as teams.
Learn more about standing committees and true teams:https://brainly.com/question/2609442
#SPJ11
true or false the operating plan focuses on how a business plans to meet the goals and objectives contained in the strategic plan.
True, the operating plan focuses on how the business plans to meet the goals and objectives contained in the strategic plan.
What is an operating plan? An operating plan is a business plan that specifies how to implement the strategies, initiatives, and activities described in the strategic plan. It is a tactical plan that outlines the specific actions, timelines, and resources required to accomplish the strategic goals and objectives. It serves as a guide for operational management by outlining how the company will meet its objectives through day-to-day operations.
As a result, it includes the specifics of the company's operations, such as hiring plans, production schedules, sales forecasts, and financial targets. The operating plan and the strategic plan are linked. The operating plan focuses on how a company will put the strategies outlined in the strategic plan into practice. It lays out the specific steps that will be taken to achieve the strategic plan's goals and objectives. They're both important in business planning because the strategic plan outlines what the company wants to accomplish, and the operating plan outlines how it will get there.
To learn more about the “operating plan” refer to the https://brainly.com/question/30319538
#SPJ11
EcoFabrics has budgeted overhead costs of $945,000. It has allocated overhead on a plantwide basis to its two products (wool and cotton) using direct labor hours which are estimated to be 450,000 for the current year. The company has decided to experiment with activity-based costing and has created two activity cost pools and related activity cost drivers. These two cost pools are cutting (cost driver is machine hours) and design (cost driver is number of setups). Overhead allocated to the cutting cost pool is $360,000 and $585,000 is allocated to the design cost pool. Additional information related to these pools is as follows.WoolCottonTotalMachine hours 100,000 100,000 200,000Number of setups 1,000 500 1,500 Calculate the overhead rate using activity based costing. (Round answers to 2 decimal places, e.g. 12.25.)Overhead rates for activity-based costing Cutting $per machine hourDesign $per setupLINK TO TEXTLINK TO TEXT Determine the amount of overhead allocated to the wool product line and the cotton product line using activity-based costing.Wool product lineCotton product lineOverhead Allocated $$LINK TO TEXTLINK TO TEXT Calculate the overhead rate using traditional approach. (Round answer to 2 decimal places, e.g. 12.25.)Overhead rates using the traditional approach $per direct labor hourLINK TO TEXTLINK TO TEXT What amount of overhead would be allocated to the wool and cotton product lines using the traditional approach, assuming direct labor hours were incurred evenly between the wool and cotton?Wool product lineCotton product lineOverhead Allocated $$
For the first question, the overhead rates using activity-based costing are $0.18 per machine hour for the cutting cost pool and $0.39 per setup for the design cost pool. For the second question, the overhead allocated to the wool product line would be $180,000 and the overhead allocated to the cotton product line would be $385,000. For the third question, the overhead rate using the traditional approach is $2.11 per direct labor hour. For the fourth question, the amount of overhead allocated to the wool product line would be $225,500 and the overhead allocated to the cotton product line would be $719,500.
for such more questions on product
https://brainly.com/question/25922327
#SPJ11
Allocation of Package Purchase Price Tamock Company purchased a plant from one of its suppliers. The $975,000 purchase price included the land, a building, and factory machinery. Tamock also paid $5,000 in legal fees to negotiate the purchase of the plant. An appraisal showed the following values for the items purchased. PropertyAssessed Value Land$126,000 Building486,000 Machinery288,000 Total$900,000 Using the assessed value as a guide, allocate the total purchase price of the plant to the land, building, and machinery accounts in Tamock Company’s records.
Tamock Company purchased a plant from one of its suppliers for a total purchase price of $975,000.
An appraisal showed that the land was assessed at $126,000, the building at $486,000, and the machinery at $288,000. This adds up to a total assessed value of $900,000. Using the assessed values as a guide, the following allocation of the purchase price can be made to the land, building, and machinery accounts in Tamock Company's records:
For more about purchased:
https://brainly.com/question/24112214
#SPJ11
Branson Corp. purchased a new machine for its business. The following list shows the various expenditures for the machine during its first year: - Base purchase price,
$50,000
- Sales tax incurred at the time of purchase,
$3,000
- Installation charges for the machine,
$2,000
- Insurance costs incurred while the machine was being shipped,
$200
- Insurance costs for the first year of the machine's service life,
$500
- Ordinary repairs and maintenance costs during the first year of the machine's service life,
$1,200
Question: What should be the capitalized cost of the machine? Do not use symbols or cents in the numerical response. Answer:
$
The capitalized cost of the machine should be 56,900.
Capitalized cost is also called the historical cost of the asset. It is the actual cost of acquiring the asset along with all the necessary expenditures incurred to get the asset ready for use in the production process.
The different expenditures for the machine during its first year include:
The base purchase price, $50,000
Sales tax incurred at the time of purchase, $3,000
Installation charges for the machine, $2,000
Insurance costs incurred while the machine was being shipped, $200
Insurance costs for the first year of the machine's service life, $500
Ordinary repairs and maintenance costs during the first year of the machine's service life, $1,200
The capitalized cost of the machine will be the sum of all the expenditures,
$50,000 + $3,000 + $2,000 + $200 + $500 + $1,200 = $56,900
Thus, the capitalized cost of the machine is $56,900.
Learn more about capitalized cost here:
https://brainly.com/question/31066685
#SPJ11
Creating a new product to increase margin is an example of using product implementations to achieve competitive advantage.True or false
By creating a new product, companies can increase their margins by offering a product that is differentiated from competitors. This allows them to charge a premium price and increase their margins. Thus, this statement is True.
A competitive advantage is a feature that enables a company to outperform its competitors. Competitive advantage enables a business to achieve superior performance or generate greater profits than its rivals, allowing it to develop more customers and gain a larger market share than its competitors.
When a business has a competitive advantage, it is in a more robust position to capture a larger market share than its competitors.
In this case, creating a new product to increase margin is an example of using product implementations to achieve a competitive advantage. One of the ways companies can gain a competitive advantage is by introducing new products into the market.
As a result, companies can use this method to introduce new products that will help them gain a competitive advantage over their rivals.
The introduction of a new product will assist the company in increasing its margin, which will enable it to outperform its rivals.
Learn more about margin here:
https://brainly.com/question/13248184
#SPJ11
Which of the following is true about Maven?
- Maven is a project management and comprehension tool.
- Maven provides developers a complete build lifecycle framework.
- Both of the above.
- None of the above.
Maven is a project management and comprehension tool that provides developers a complete build lifecycle framework. Therefore, the correct option is "Both of the above.
"Maven: Maven is a project management and comprehension tool. Maven is built with Java, and it was created by Apache Software Foundation. Maven's key feature is the POM (Project Object Model). It's a metadata file for projects that specifies how they are constructed, their dependencies, and how they are to be constructed. Maven's central function is to construct projects by compiling source code, generating binary archives, and running unit tests, among other things.Maven provides developers a complete build lifecycle framework that includes project development, document creation, testing, and deployment. This framework includes a set of plug-ins that provide preconfigured scripts for different phases of the development lifecycle. The POM (Project Object Model) specifies the plug-ins to be used at each phase of the lifecycle.The correct option is "Both of the above." Maven is a project management and comprehension tool that provides developers with a complete build lifecycle framework.
Read more about management here:https://brainly.com/question/28072798
#SPJ11
strong property rights are important for modern economic growth because group of answer choices business cycle fluctuations will be smaller and less likely to disrupt investment patterns. they ensure an equitable distribution of income. people are more likely to invest if they don't fear that others can take their returns on investment without compensation they allow governments to extract the gains from private citizens' investments
Strong property rights are important for modern economic growth because people are more likely to invest if they don't fear that others can take their returns on investment without compensation.
What are property rights?Property rights refer to the ownership and control of an economic resource. Ownership provides the right to use the resource as you see fit, while control refers to the right to receive income from the resource. Property rights, in essence, allow for the creation of wealth and incentivize individuals and businesses to use and develop their resources fully.
What is economic growth?Economic growth refers to the increase in the amount of goods and services produced by a country or region over a given period. It is measured by the increase in real GDP, employment, and investment in physical and human capital.The importance of strong property rights for modern economic Growth
Strong property rights are critical to modern economic growth for several reasons.
Learn more about property rights at
https://brainly.com/question/29613081
#SPJ11
The Lucas critique argues that because the way people form expectations is based on government policies, economists_____ predict the effect of a change in policy without taking changing expectations into account. Select one: O a. in no way can o b. only partly, can O c.partly; cannot O d. in no way; cannot
The Lucas critique argues that because the way people form expectations is based on government policies, economists partly cannot predict the effect of a change in policy without taking changing expectations into account.
Lucas critique refers to a criticism of econometric models that focus on macroeconomic policy analysis. In essence, it argues that the statistical relationships estimated from past data to determine future policy are not necessarily stable over time.
This critique was put forward by the economist Robert E. Lucas Jr. in his 1976 paper. The Lucas critique asserts that forecasting based on historical macroeconomic data is deficient because people will adjust their behavior based on the policy's expected consequences.
Lucas suggests that past relationships between economic variables cannot be relied on as a guide to future policies because economic agents adjust their expectations in response to government policy changes.
Learn more about Luca critique https://brainly.com/question/27383803
#SBJ11
the labor force is the sum of the ______ and ______.
The labor force is the sum of the employed and the unemployed.
Employed individuals are those who are currently working for pay or profit, either as an employee or self-employed. This includes those who are on temporary leave, such as vacation or illness, but are expected to return to work.
Unemployed individuals, on the other hand, are those who are currently not working but are actively seeking employment and are available for work. They may have recently lost their job or are new to the job market.
The labor force, therefore, consists of both those who are currently working and those who are available and actively seeking employment. It is an important measure of the economy's capacity to produce goods and services and is used to calculate key labor market statistics such as the unemployment rate and labor force participation rate.
Learn more about labor here
https://brainly.com/question/14348614
#SPJ4
if sandstorm corporation chooses to defer and amortize its research and experimental expenditures over a period of 60 months, what are its related deductions in 2021 and 2022?
If Sandstorm Corporation chooses to defer and amortize its research and experimental expenditures over a period of 60 months, its related deductions in 2018 is $127,500 and in 2019 is $1,954.17.
Deduction in 2018:According to the given data, Sandstorm Corporation incurs the following expenses in 2018:
Salaries = $85,000
Materials = $30,000
Depreciation on equipment = $12,500
Therefore, the total expenses in 2018 are:
Total expenses = Salaries + Materials + Depreciation on equipment
= $85,000 + $30,000 + $12,500
= $127,500
Now, the related deductions of Sandstorm Corporation in 2018 are:
Related deductions in 2018 = Total expenses = $127,500
Deduction in 2019:The total expenditures that Sandstorm Corporation will incur in 2019, after the benefits of the project start from July 2019, are calculated below.
The total number of months Sandstorm Corporation has to amortize its research and experimental expenditures = 60 months
Given that the benefits of the project will be realized starting in July 2019, therefore, the remaining months left for the project = (60 - 6) = 54 months
The total expenditures that Sandstorm Corporation will incur in 2019 are:
Total expenditures in 2019 = Salaries + Materials + (Depreciation on equipment / 5 years) x (number of months remaining for the project / 12 months)
Therefore, substituting the given values in the above equation,
Total expenditures in 2019 = $85,000 + $30,000 + ($12,500 / 5) x (54 / 12)= $85,000 + $30,000 + $2,250= $117,250
Therefore, the related deductions of Sandstorm Corporation in 2019 are:
Related deductions in 2019 = Total expenditures in 2019 / 60= $117,250 / 60= $1,954.17
Hence, the related deductions of Sandstorm Corporation in 2018 and 2019 are $127,500 and $1,954.17 respectively.
Note: The question is incomplete. The complete question probably is: Sandstorm Corporation decides to develop a new line of paints. The project begins in 2018. Sandstorm incurs the following expenses in 2018 in connection with the project: Salaries $85,000 Materials 30,000 Depreciation on equipment 12,500 The benefits from the project will be realized starting in July 2019. If Sandstorm Corporation chooses to defer and amortize its research and experimental expenditures over a period of 60 months, what are its related deductions in 2018 and 2019?
Learn more about Deductions:
https://brainly.com/question/13757943
#SPJ11
Which of these is (are) most likely to increase productivity? A) higher corporate tax rates. B) increase in pop. C) investments in research and development.
What is productivity?
Productivity is the amount of production that can be generated from a certain amount of inputs. It is an assessment of efficiency in which a company transforms inputs into outputs.
What are Investments in research and development?
The money put into research and development (R&D) to enhance the goods and services a company provides is referred to as investments in research and development. R&D initiatives may lead to the creation of new goods or procedures that can make a company more profitable by allowing it to gain a larger market share, for example.
Investments in research and development can help a company improve its production process by increasing efficiency, reducing costs, and enhancing product quality. As a result, it can assist to increase productivity.
Option C, investments in research and development, is most likely to increase productivity.
Learn more about research and development (R&D) at https://brainly.com/question/29782299
#SPJ11
