Answer:
DeforestationExplanation:
__________________________________________________________
According to Vocal Media,
__________________________________________________________
Deforestation is the permanent destruction of forests in order to utilize the land or trees. Typically, deforestation is clearing a lot of trees without the intention of establishing future growth. Harvesting, forest fires, and insect infestations do not count as deforestation because the affected areas will eventually grow back.
__________________________________________________________
Hope this helps! <3
__________________________________________________________
Help please!!!
if superman at 90kg jumps a 40m building in a single bound how much work does superman perform
Answer:
5 years worth of work (aka all of the homework i currently have)
1 point
An unfortunate bug splatters against the windshield of a moving car.
Compared to the acceleration of the car, the acceleration of the bug is
Answer:the same
Explanation:their moving at the same speed and collapse
According to Newton's law, the force exerted by the bug and car is equal and opposite. Thus their acceleration decreases as mass increases. Therefore the acceleration of bug will be greater than that of the car.
What is acceleration?Acceleration, in physics is the rate of change in velocity. Thus it has the unit m/s². Newton's second law of motion states that the force acting on a moving body is the product of its mass and acceleration.
Hence F= m a indicates that the acceleration is in inverse proportionality with the mass. Thus a body with greater mass will have smaller acceleration but greater force.
According to third law of motion, an action have an equal opposite reaction. Thus the force exerted by the bug on the car and the force exerted by the car on bug are equal and opposite where, the bug will have greater acceleration due to its less mass.
To find more on acceleration, refer here:
https://brainly.com/question/12550364
#SPJ6
A 20 kg mass is hanging on one side of a pulley and a 5 kg mass is hanging on the other. Determine the acceleration of each mass.
Answer:
i believe it's 7
Explanation:
What factors affect the amount of potential and kinetic energy a roller coaster has
Answer:
As the roller coaster goes higher, more potential energy is increased in the roller coaster. Caused by gravity and the roller coaster's position, the potential energy is stored in the roller coaster. For example, this ball is at the top of a hill, where potential energy is at it's highest. Potential energy can be calculated by Potential Energy=Mass X Acceleration X Height.
Explanation:
The factor that impact the amount of potential and kinetic energy should be explained below.
Factor impact the amount of energy:Since the roller coaster should be high which there should be more potential energy and the same should be increased.
Due to the gravity and the position of the roller coaster the potential energy should be stored in the rolar coaster.
Just like when the ball is in the top of the hill when there is high potential energy so in this way it should be impacted.
learn more about energy here: https://brainly.com/question/12052751
What is the difference between the geographic North Pole and the magnetic north pole?
Answer:
Magnetic north is the direction towards the north magnetic pole, which is a wandering point where the Earth's magnetic field goes vertically down into the planet
Explanation:
I searched it up lol
41. What effects the efficiency of a pulley?
a. the type of rope or cable
b. the way the wheel turns
c. the length of the rope
d. how big the wheel is
e. only a and be
f. all of the above
Answer:
e. only a and b
What does a represent??
I need it quick
Answer:
a is acceleration
Explanation:
it is very important to use _______ in your calculations
a: si units of measurement
b: alternative units of measurement
c : units of length and width
d: derived units
Answer:
snoemw
Explanation:
Write 2 laws of reflection of light
Answer:
Answer⤵i)The first law of reflection states that the incident ray, the reflected ray, and the normal to the surface of the mirror, all lie in the same plane. ii)The second law of reflection states that the angle of reflection is equal to the angle of incidence. Both angles are measured with respect to the normal to the mirror.A stone takes 5.4 seconds to fall from the top of a cliff. The cliff is
meters high.
143
53
286
573
Answer:
143
Explanation:
Using one of the 3 fundamental equations in physics, y=vo*t+1/2gt^2, we can use this equation to find the total distance that was traveled.
Acceleration due to gravity is always 9.8m/s^2 and time is 5.4s, we also have no initial velocity.
Given this, we can plug in the known variables.
y=0t+1/2*9.8*5^2
simplify,
y=4.9*5.4^2
y=4.9*29.16
y=142.884m which we can round up to 143 meters
Final Answer: 143 meters
An object weighing 49 N is pushed across a floor by a force of 12 N. What is the acceleration of the object?
Answer:
Explanation:
Given parameters:
Weight of object = 49N
Force applied = 12N
Unknown:
Acceleration of object = ?
Solution:
The acceleration of the object is found by dividing the force by the weight;
Acceleration = [tex]\frac{12}{49}[/tex] = 0.25m/s²
A rat runs 2m right, turns around and runs 3m left. Then goes 2m right. What is its displacement?
A. 1m right
B. 1m left
C. 7m
D. 7m left
Answer:
Explanation:
I think this answer would be 1m to the left.
Electric power is to be generated by installing a hydraulic turbine-generator at a site 70 m below the free surface of a large water reservoir that can supply water at a rate of 1500 kg/s steadily. If the mechanical power output of the turbine is 800 kW and the electric power generation is 750 kW, determine the turbine efficiency and the combined turbine–generator efficiency of this plant. Neglect losses in the pipes.
Answer:
[tex]\eta_{turbine} = 0.777 = 77.7\%[/tex]
[tex]\eta_{combined} = 0.728 = 72.8\%[/tex]
Explanation:
First we calculate the power input to the turbine. The input power will be equal to the potential energy of water per unit time:
Input Power = [tex]P_{in} = \frac{Work}{Time} = \frac{Potential\ Energy\ of\ Water}{t} \\P_{in} = \frac{(mass)(g)(height)}{Time} = (mass flow rate)(g)(height)\\\\P_{in} = (1500\ kg/s)(9.81\ m/s^2)(70\ m)\\P_{in} = 1.03\ x\ 10^6\ W = 1030\ KW[/tex]
Now, for turbine efficiency:
[tex]\eta_{turbine} = \frac{Mechanical\ Power\ Out}{P_{in}}\\\\\eta_{turbine} = \frac{800\ KW}{1030\ KW}\\\\\eta_{turbine} = 0.777 = 77.7\%[/tex]
for generator efficiency:
[tex]\eta_{generator} = \frac{Power\ Generation}{Mechanical\ Power\ Out}\\\\ \eta_{generator} = \frac{750\ KW}{800\ KW}\\\\\eta_{turbine} = 0.9375 = 93.75\%[/tex]
Now, for combined efficiency:
[tex]\eta_{combined} = \eta_{turbine}\ \eta_{generator}\\\\\eta_{combined} = (0.777)(0.937)\\\eta_{combined} = 0.728 = 72.8\%[/tex]
If you add an additional neutron to an atomwhat do you create?
Answer:
However, if you add a thousand neutrons, you will be creating one super-radioactive atom. Neutrons play a major role in the mass and radioactive properties of atoms. You may have read the page on isotopes. Isotopes are created when you change the normal number of neutrons in an atom.
Explanation:
The neutron is a subatomic particle, symbol n or n⁰, which has a neutral (not positive or negative) charge and a mass slightly greater than that of a proton. Protons and neutrons constitute the nuclei of atoms. Since protons and neutrons behave similarly within the nucleus, and each has a mass of approximately one atomic mass unit, they are both referred to as nucleons. Their properties and interactions are described by nuclear physics.
Should the resistance of an ammeter low or high ?give reason
Answer:
The resistance of an ammeter should be low. This is because an ammeter is connected in series with the circuit for the measurement of electric current. In case, its resistance is high, then some amount of current may lost in heating it leading to the inaccurate reading. An ideal ammeter is one which has zero resistance.
What happens to the pressure as air rises from the ground into the atmosphere?
Does it increase or decrease?
Answer:
please try brainlist answer
As the atmosphere expands the further you get from the Earth's surface, it becomes less dense and air pressure decreases. As you increase altitude (distance from Earth's surface) in an airplane, air pressure changes
कृपया ब्रेनलिस्ट का उत्तर केवल 1more उत्तर देने का प्रयास करें।
what is plasma made of and what are its properties.
why do we need to study plasma in physics
Plasma is made up of about 90% water. It also has salts and enzymes.
Plasma has:
no fixed shape no fixed volume are less dense than liquids and solidsAnswer:
Plasma is made up of about 90% water . These are the properties of plasma. Plasmas have no fixed shape or volume, and are less dense than solids or liquids. Studying plasmas is critical to advance technology development for practical purposes as developing functional fusion reactors and to understand the processes in stars, planets and inter-stellar spaceI hope l helped you ❤❤How do I calculate how many meters are in 7.2 light years?
The exact question is:
Calculate in meters the distance between a galaxy and the Earth if the distance is equal to 7.2 light years.
Answer:
68.2 Quadrillion meters
Explanation:
A lightyear is the distance that light travels in one year.
Speed of light is [tex]3*10^8\ m/s[/tex]
So light covers 300,000,000 meters in one second.
One year has 31536000 seconds so , light covers
[tex]9.461*10^{15}\ meters\ in\ one\ year[/tex]
so 7.2 light years is
[tex]7.2*(9.461*10^{15})\\6.82*10^{16}[/tex]
so 7.2 light years is
6.82 x 10^(16) meters or
68.2 Quadrillion meters
Which is true of the greenhouse effect?
A. It is purely a manmade phenomenon.
B. it does not involve carbon dioxide.
C. It causes cooling of Earth's atmosphere.
C. it traps thermal energy from the Sun.
Answer:
c is correct option thanks to brainly
A pulse with a height of 20 cm and a length of 30 cm travels with a speed of 400 cm/s through a spring that has been stretched so it is 800 cm long. If we want to send another pulse through the spring that will have a different speed, which of the bolded words should we change? List all that will change the speed of the wave.
Answer:
To send a pulse of different speed, change the tension or stretch on the spring
Explanation:
A pulse is a single disturbance of a particle is a medium. The pulse has an amplitude or and a pulse length in the medium. The speed of the pulse is dependent on the amount of strain or tension ( stretch) applied to the medium. The speed also determines the length of the pulse but is unaffected by the or amplitude of the pulse.
Help me pretty please with a cherry on top!!
Answer:
A. im not for sure hope it helps
Explanation:
what is the two kinds of solids in amorphous
Solids can be classified into two types: crystalline and amorphous. Crystalline solids are the most common type of solid. They are characterized by a regular crystalline organization of atoms that confer a long-range order. Amorphous, or non-crystalline, solids lack this long-range order.
a strong lightning bolt transfers about 25 C to earth. how many electrons are transferred?
Answer:
[tex]n = 1.563x {10}^{20} [/tex]
Which type of air mass forms over the ocean near the equator?
A
moist and warm
B
moist and cool
C
dry and warm
D
dry and cool
Answer:
a
Explanation:
A car with a mass of 1600 kg is towing a trailer with a mass of 420 kg. The car
provides a forward thrust of 3300 N. What is the acceleration of the trailer?
Answer:
1.63366
Explanation:
I got this answer from calculator soups physics calculators. I really recommend their website for formulas.
what power is transmitted by 2A flowing across 5V
Answer:
[tex]\huge\boxed{10\:watts}[/tex]
Explanation:
Power = Current × Voltage
P = I × V
P = 2 × 5
P = 10 watts
Which of the following is most accurate statement about both light and sound wave
Which of the following is the keyboard shortcut for saving a document?
O Control V
O Control S
O Control A
O Control E
Answer:Control S, Command S on MAC=Save
1. Which statement best describes the motion of the scooter? *
A. The scooter is moving at a constant velocity.
B. The scooter is traveling up hill.
C. The scooter is speeding up at a constant rate.
D. The scooter’s motion cannot be described from a position graph.
2. What is the velocity of the scooter? *
A. 50 m/s
B. 10 m/s
C. 1.0 m/s
D. 0.0 m/s
E. Cannot answer velocity questions using a position graph
Answer:
HI
Explanation:
its E
HELP ASAP !
Which of the following situations would result in no work done by the force indicated?
a
The object undergoes only a slight displacement while the force is acting on it.
b
The force is perpendicular to the displacement of the object.
c
The force is not completely parallel to the displacement of the object
d
All of the above result in no work done by the force indicated.
Answer:
b The force is perpendicular to the displacement of the object.
Explanation:
Work is done when a force is applied on a body causing it to move in a particular direction.
Work done = Force x displacement
For work to be done, a force must applied on a body to move it through a specific distance in direction.
When force is perpendicular to the displacement of the object, the component vector resolution is 0 and the work done is 0.
