Interpreting a Z score from a sample proportion. Suppose that you conduct a hypothesis test about a population proportion and calculate the Z score to be 0.47. Which of the following is the best interpretation of this value? For the problems which are not a good interpretation, indicate the statistical idea being described. 19 a. The probability is 0.47 that the null hypothesis is true. b. If the null hypothesis were true, the probability would be 0.47 of obtaining a sample proportion as far as observed from the hypothesized value of the population proportion. c. The sample proportion is 0.47 standard errors greater than the hypothesized value of the population proportion d. The sample proportion is equal to 0.47 times the standard error. e. The sample proportion is 0.47 away from the hypothesized value of the population. f. The sample proportion is 0.47

The parabolic trajectory of the falling prey can be described by the equation y = 228 – x2/57, where y is the height above the ground and x is the horizontal distance traveled in meters. In this case, the prey was dropped at a height of 228 m and flying at 19 m/s. To calculate the total distance traveled by the prey, we can use the equation for the parabola to solve for x.

We can rearrange the equation y = 228 – x2/57 to solve for x, which gives us[tex]x = √(57*(228 – y))[/tex]. When the prey hits the ground, the height (y) is 0. Plugging this into the equation for x, we can calculate that the total distance traveled by the prey is[tex]x = √(57*(228 - 0)) = √(57*228) = 84.9 m.\\[/tex] Expressing this answer to the nearest tenth of a meter gives us the final answer of 84.9 m.

for such more questions on  parabolic trajectory

https://brainly.com/question/13244761

#SPJ11

The reason why the terms a and m have to be relatively prime integers is that it is the only way to make sure that ax≡1 (mod m) is solvable for x within the integers modulo m.

Theorem:"If a and m are relatively prime integers and m > 1, then an inverse of a modulo m exists. Furthermore, this inverse is unique modulo m. (That is, there is a unique positive integer a less than m that is an inverse of a modulo m and every other inverse of a modulo m is congruent to a modulo m.)"If a and m are relatively prime integers and m > 1, then an inverse of a modulo m exists. Furthermore, this inverse is unique modulo m. (That is, there is a unique positive integer a less than m that is an inverse of a modulo m and every other inverse of a modulo m is congruent to a modulo m.)The inverse of a modulo m is another integer, x, such that ax≡1 (mod m).

This theorem has an interesting explanation: if a and m are not co-prime, then there is no guarantee that ax≡1 (mod m) has a solution in Zm. The reason for this is that if a and m have a common factor, then m “absorbs” some of the factors of a. When this happens, we lose information about the congruence class of a, and so it becomes harder (if not impossible) to undo the multiplication by .This is the reason why the terms a and m have to be relatively prime integers.

To know more about function click here :

https://brainly.com/question/12976257

#SPJ11

Answer:

12

Step-by-step explanation:

i think its right

The volume of the rectangular prism with the same dimensions as the rectangular pyramid is 300 cubic centimeters.

A rectangular prism, also known as a rectangular parallelepiped, is a three-dimensional solid shape with six rectangular faces, where each pair of opposite faces are congruent (i.e., have the same dimensions) and parallel to each other.

The rectangular prism is defined by three dimensions: length, width, and height. The length is the longest dimension of the prism, the width is the second-longest dimension, and the height is the shortest dimension, perpendicular to both length and width. The volume of a rectangular prism is given by the formula: V = l * w * h.

In the given question,

Let's assume that the rectangular pyramid has a rectangular base with length l, width w, and height h. The formula for the volume of a rectangular pyramid is given by:

V_pyramid = (1/3) * base_area * height

where base_area = l * w is the area of the rectangular base of the pyramid.

We know that the volume of the rectangular pyramid is 100 cm^3, so we can write: 100 = (1/3) * l * w * h

Simplifying this equation, we get:

l * w * h = 300

Now, let's find the volume of the rectangular prism with the same dimensions. The formula for the volume of a rectangular prism is given by: V_prism = base_area * height

where base_area = l * w is the area of the rectangular base of the prism.

Since the rectangular prism has the same dimensions as the rectangular base of the pyramid, its volume is given by: V_prism = l * w * h

Substituting the value of l * w * h from the equation we derived earlier, we get: V_prism = 300

Therefore, the volume of the rectangular prism with the same dimensions as the rectangular pyramid is 300 cubic centimeters.

To know more about rectangular pyramid, visit:

https://brainly.com/question/21416050

#SPJ1

(a) Using the Trapezoidal rule, T8 = (1/16)[cos(0) + 2cos(1/16) + 2cos(2/16) + ... + 2cos(7/16) + cos(1)].

Using the Midpoint rule, M8 = (1/8)[cos(1/16) + cos(3/16) + ... + cos(15/16)].

(b) The error in the Trapezoidal rule is bounded by (1/2880)(1-0)^3(max|f''(x)|), where f''(x) = -4x^2sin(x^2) and 0 <= x <= 1. Therefore, the error in T8 is approximately 0.00014. The error in the Midpoint rule is bounded by (1/1920)(1-0)^3(max|f''(x)|), which gives an approximate error of 0.00011 for M8.

(c) Let n be the number of intervals in the approximation.

Then, the error bound for the Trapezoidal rule is (1/2880)(1-0)^3(max|f''(x)|)(1/n^2), and the error bound for the Midpoint rule is (1/1920)(1-0)^3(max|f''(x)|)(1/n^2).

Setting these equal to 0.0001 and solving for n, we get n >= 129 and n >= 160 for the Trapezoidal and Midpoint rules, respectively. Therefore, we should choose n >= 160 to ensure that both approximations are accurate to within 0.0001.
For more questions like Midpoint rule click the link below:

https://brainly.com/question/17218343

#SPJ11

Jana, because she has the highest ratio since 8/10 is greater than 9/12.

A ratio is a comparison of two numbers or quantities expressed in relation to each other. It represents the relative size or magnitude of one quantity with respect to another. Ratios are typically written as a fraction, with the first number being the numerator and the second number being the denominator, and can also be expressed as a decimal or percentage.

Batting average is a statistical measure used in baseball to evaluate a player's performance at the plate. It is calculated as the ratio of a player's total number of hits to their total number of at-bats (the number of times they attempt to hit the ball).

In the given question,

A higher batting average indicates a better performance, since it means the player is successfully hitting the ball more often.

In this case, we are given the number of hits and attempts for two players, Jana and Tasha. To compare their batting averages, we need to calculate the ratio of their hits to their attempts.

Jana has hit the ball 8 times out of 10 attempts, so her batting average is 8/10 = 0.8.

Tasha has hit the ball 9 times out of 12 attempts, so her batting average is 9/12 = 0.75.

To determine which player has the better batting average, we compare their ratios. Since 0.8 is greater than 0.75, Jana has the higher ratio and therefore the better batting average.

So, the answer is Jana, because she has the highest ratio (8/10 = 0.8), which means she has the better batting average compared to Tasha (9/12 = 0.75).

To know more about ratios, visit:

https://brainly.com/question/13419413

#SPJ1

Answer:

  (B)  60 degrees

Step-by-step explanation:

You want the measure of angle A = x+2, given that it forms a linear pair with angle B = 2x+4.

The sum of angles in a linear pair is 180°

  A +B = 180

  (x +2) +(2x +4) = 180 . . . . use the given expressions

  3x +6 = 180 . . . . . . . . . simplify

  x +2 = 60 . . . . . . . . . divide by 3. Angle A = x+2 = 60

The measure of angle A is 60 degrees.

Vertex: The vertex of the function is at the point (-2, 3).

The domain of a function is the set of all possible input values (often represented as x) for which the function is defined. In other words, it is the set of all values that can be plugged into a function to get a valid output. The domain can be limited by various factors such as the type of function, restrictions on the input values, or limitations of the real-world scenario being modeled.

The range of a function refers to the set of all possible output values (also known as the dependent variable) that the function can produce for each input value (also known as the independent variable) in its domain. In other words, the range is the set of all values that the function can "reach" or "map to" in its output.

In the given question,

Domain: The domain of the function is all real numbers greater than or equal to -2, since the square root of a negative number is not defined in the real number system.

Range: The range of the function is all real numbers less than or equal to 3, since the maximum value of the function occurs at x=-2, where f(x)=3.

Vertex: The vertex of the function is at the point (-2, 3).

Four additional points:When x=-1, f(x)=-(√(-1)+2)+3 = -1, so (-1,-1) is a point on the graph.

When x=0, f(x)=-(√0+2)+3 = 1, so (0,1) is a point on the graph.

When x=1, f(x)=-(√1+2)+3 = 2, so (1,2) is a point on the graph.

When x=4, f(x)=-(√4+2)+3 = -1, so (4,-1) is a point on the graph

To know more about Graphs, visit:

https://brainly.com/question/17267403

#SPJ1

Answer:

Step-by-step explanation:

kernel composition rules 2 1 point possible (graded) let and be two vectors of the same dimension. use the the definition of kernels and the kernel composition rules from the video above to decide which of the following are kernels. (note that you can use feature vectors that are not polynomial.) (choose all those apply. )

Answer:

(-2,9)

Step-by-step explanation:

when moving it 5 units left on the x axis it would be 5-7

So in turn you would be given (-2,9)

Because the y stays the same you would still have (?,9)

Answer:

We can simplify the expression as follows:

5^(2000) + 5^(1999)

5^(1999) - 5^(1997)

= 5^(1999) * (1 + 1/5)

5^(1997) * (1 - 1/25)

= (5/4) * (25/24) * 5^(1999)

= (125/96) * 5^(1999)

Therefore, the value of the expression is (125/96) * 5^(1999).

Step-by-step explanation:

The Simpson's rule gives a more accurate approximation of the definite integral.

The question requires you to use both the trapezoidal rule and Simpson's rule to approximate the value of a definite integral for the given value of n. Then, you should round your answers to four decimal places and compare the results with the exact value of the definite integral.Integral: 0 - 4 for x^2 dx, n=4Using Trapezoidal Rule:The Trapezoidal rule is a numerical integration method used to calculate the approximate value of a definite integral. The rule involves approximating the region under the graph of the function as a trapezoid and calculating its area. The formula for Trapezoidal Rule is given by:∫baf(x)dx≈h2[f(a)+2f(a+h)+2f(a+2h)+……+f(b)]whereh=b−anUsing n = 4, we get, h = (b-a)/n = (4-0)/4 = 1Therefore,x0 = 0, x1 = 1, x2 = 2, x3 = 3 and x4 = 4f(x0) = 0, f(x1) = 1, f(x2) = 4, f(x3) = 9, and f(x4) = 16∫4.0x^2 dx = (1/2)[f(x0) + 2f(x1) + 2f(x2) + 2f(x3) + f(x4)](1/2)[0 + 2(1) + 2(4) + 2(9) + 16] = 37

Using Simpson's Rule:Simpson's rule is a numerical integration method that is similar to the Trapezoidal Rule, but the function is approximated using quadratic approximations instead of linear approximations. The formula for Simpson's Rule is given by:∫baf(x)dx≈h3[ f(a)+4f(a+h)+2f(a+2h)+4f(a+3h)+….+f(b)]whereh=b−an, and n is even.Using n = 4, we get, h = (b-a)/n = (4-0)/4 = 1Therefore, x0 = 0, x1 = 1, x2 = 2, x3 = 3 and x4 = 4f(x0) = 0, f(x1) = 1, f(x2) = 4, f(x3) = 9, and f(x4) = 16∫4.0x^2 dx = (1/3)[f(x0) + 4f(x1) + 2f(x2) + 4f(x3) + f(x4)](1/3)[0 + 4(1) + 2(4) + 4(9) + 16] = 20Comparing the results with the exact value of the definite integral, we have:Integral 0 - 4 for x^2 dx = ∫4.0x^2 dx = [x^3/3]4.0 - [x^3/3]0 = 64/3 ≈ 21.3333Thus, using Trapezoidal Rule, we get an approximation of 37, which has an error of 15.6667, while using Simpson's Rule, we get an approximation of 20, which has an error of 1.3333. Therefore, Simpson's rule gives a more accurate approximation of the definite integral.

Learn more about Approximation

brainly.com/question/30707441

#SPJ11

The real part of the particular solution to the differential equation is [tex](1/30)Re(e^(3it))(sin(3t) - cos(3t))[/tex]

The real part of the particular solution to the differential equation:

[tex]\frac{d^2y}{dt^2} +3\frac{dy}{dt} +7y = e^(3it)[/tex]

First, we assume a particular solution of the form:

[tex]y(t) = Bcos(3t) + Csin(3t)[/tex]

where B and C are real fractions.

Taking the first and second derivatives of y(t), we get:

[tex]\frac{dy}{dt} = -3Bsin(3t) + 3Ccos(3t)[/tex]

[tex]\frac{d^2y}{dt2} = -9Bcos(3t) - 9Csin(3t)[/tex]

Substituting these into the differential equation, we get:

[tex](-9Bcos(3t) - 9Csin(3t)) + 3(-3Bsin(3t) + 3Ccos(3t)) + 7(Bcos(3t) + Csin(3t)) = e^(3it)[/tex]

Simplifying and collecting terms, we get:

[tex](-9B + 21C)*cos(3t) + (-9C - 9B)*sin(3t) = e^(3it)[/tex]

Comparing the coefficients of cos(3t) and sin(3t), we get:

[tex]-9B + 21C = Re(e^(3it))[/tex]

[tex]-9C - 9B = 0[/tex]

Solving for B and C, we get:

[tex]B = -C[/tex]

[tex]C = (1/30)*Re(e^(3it))[/tex]

Therefore, the particular solution is:

[tex]y(t) = -Ccos(3t) + Csin(3t) = (1/30)Re(e^(3it))(sin(3t) - cos(3t))[/tex]

A differential equation is a mathematical equation that relates a function to its derivatives. It is a powerful tool used in many fields of science and engineering to describe how physical systems change over time. The equation typically includes the independent variable (such as time) and one or more derivatives of the dependent variable (such as position, velocity, or temperature).

Differential equations can be classified based on their order, which refers to the highest derivative present in the equation, and their linearity, which determines whether the equation is a linear combination of the dependent variable and its derivatives. Solving a differential equation involves finding a function that satisfies the equation. This can be done analytically or numerically, depending on the complexity of the equation and the available tools.

To learn more about Differential equation visit here:

brainly.com/question/14620493

#SPJ4

Answer:

its 126 and 54 hope this helps

If a triangle with all sides of equal length has a perimeter of 15x + 27, the expression for the length of one of the sides is (5x + 9).

The perimeter of a triangle is the sum of the lengths of all three sides. If all the sides of the triangle are equal, you can find the length of one side by dividing the perimeter by 3. Here, the perimeter is given as 15x + 27.

Therefore, the length of one side will be (15x + 27) / 3 = 5x + 9. Hence, an expression for the length of one of the sides is (5x + 9).

Learn more about expression here: brainly.com/question/1859113.

#SPJ11

Answer:

3x, 4x | 5, 3

Step-by-step explanation:

Three numbers have a product of 115 and a sum of 3(√115), which is the smallest possible sum.

In mathematics, a positive number is any number that is greater than zero. This includes all numbers that are written without a minus sign or are explicitly denoted as positive, such as 1, 2, 3, 4, 5, and so on

To find three positive numbers whose product is 115 and whose sum is as small as possible, we can use the AM-GM inequality. In other words, if we have three positive numbers x, y, and z, then:

(x + y + z)/3 ≥ (xyz)^(1/3)

If we rearrange this inequality, we get:

x + y + z ≥ 3(√(xyz))

Now, let's apply this inequality to the given problem. We want to find three positive numbers x, y, and z whose product is 115 and whose sum is as small as possible. Therefore, we want to minimize x + y + z while still satisfying the condition xyz = 115.

Using the AM-GM inequality, we have:

x + y + z ≥ 3(√(xyz)) = 3(√115) ≈ 16.75

Therefore, the sum of the three numbers is at least 16.75. To find three numbers that achieve this minimum sum, we can use trial and error or solve the system of equations:

xyz = 115

x + y + z = 3(√115)

One solution to this system is:

x = √(115/3)

y = √(115/3)

z = 3(√(115/3)) / 5

These three numbers have a product of 115 and a sum of 3(√115), which is the smallest possible sum.

To know more about positive numbers visit:

https://brainly.com/question/1149428

#SPJ1

The complete question is Find three positive numbers whose product is 115.

The time difference of 15 minutes, or 25 percent (15 divided by 60 times 100), is called the time saved.

An experiment is a controlled study in which a scientist manipulates a variable in order to determine its effects. An experiment must have a testable hypothesis, be replicable, and produce empirical evidence.

Discussing the time difference in an experiment. In an experiment, it takes one hour to memorize all of the words on a list, and two years later, they are relearned in 45 minutes.

The time difference of 15 minutes, or 25 percent (15 divided by 60 times 100), is referred to as the time saved.

Time saved is the difference between the total time it takes to finish a process with a particular method and the total time it would take to complete the same process without that method.

Learn more about the Time difference here:

brainly.com/question/30132266

#SPJ11

The mean number of burps after drinking root beer is between 0.66 and 4.24 burps fewer than after drinking cola.

Mean: The "average" number obtained by adding all data points and dividing the total number of data points by the total number of data points.

Part A: A paired t-test can be used to see if there is a significant difference in the number of burps after drinking root beer versus cola. The null hypothesis states that there is no difference in the mean number of burps between the two beverages, whereas the alternative hypothesis states that there is. Using a two-tailed test with a significance level of = 0.05, we find that the t-value is -3.365 and the p-value is 0.003. We reject the null hypothesis because the p-value is less than the significance level and conclude that there is a significant difference in the mean number of burps between root beer and cola.

Part B: We can use the paired t-test formula to generate a 95% confidence interval for the difference in the mean number of burps between root beer and cola:

(xd - d) / (sd / n) t

where xd represents the sample mean difference, d represents the hypothesised population mean difference (which is 0), sd represents the sample standard deviation of the differences, and n represents the sample size.

We calculate the sample mean difference to be -2.45 and the sample standard deviation of the differences to be 2.69 using the data in the table. We get a t-value of -3.365 with 19 degrees of freedom after plugging in these values. The critical t-value for a 95% confidence interval with 19 degrees of freedom is 2.093, according to a t-distribution table.

As a result, the 95% CI for the true difference in the mean number of burps between root beer and cola is (-4.24, -0.66). This means that we are 95% certain that the true population mean difference is within this range.

To know more about Mean Number Visit:

https://brainly.com/question/21800892

#SPJ1

The parking lot has a width of around [tex]0.937[/tex] meters.

This same large percentage of govt, company, and industry use metric measurements, but imperial measurements are still frequently used for fresh milk sales and are marked with the metric equiv for journey distances, vehicle speeds, and sizes of returnable milk canisters, beer glasses, and cider glasses.

100 centimeters make up one meter. Meters are able to gauge a building's length or a playground's dimensions. 1000 meters make up one kilometer.

[tex]3760 cm = 37.6 m[/tex]

Solve for the width,

[tex]area = (1/2) * (base1 + base2) * height[/tex]

where,

base1 [tex]= 73.4 m[/tex]

base2 [tex]= 37.6 m[/tex]

area [tex]= 2,930.4[/tex] square meters

Let's solve for the height first,

[tex]height = 2 * area / (base1 + base2)[/tex]

[tex]height = 2 * 2,930.4 / (73.4 + 37.6)[/tex]

[tex]height = 2 * 2,930.4 / 111[/tex]

[tex]height = 56.16 m[/tex]

We nowadays can apply the algorithm to determine the width.

[tex]width = (area * 2) / (base1 + base2) * height[/tex]

[tex]width = (2 * 2,930.4) / (73.4 + 37.6) * 56.16[/tex]

[tex]width = 5856.8 / 111 * 56.16[/tex]

[tex]width = 5856.8 / 6239.76[/tex]

[tex]width = 0.937[/tex]

Therefore, the width of the parking lot is approximately [tex]0.937[/tex] meters.

To know more about meters visit:

https://brainly.com/question/22552981

#SPJ1

In response to the stated question, we may state that To conclude, the function problem's relation is a function for all x values except x between 3 and 4.

In mathematics, a function is a connection between two sets of numbers in which each member of the first set (known as the domain) corresponds to a single element in the second set (called the range). In other words, a function takes inputs from one set and produces outputs from another. Inputs are commonly represented by the variable x, whereas outputs are represented by the variable y. A function can be described using an equation or a graph. The equation y = 2x + 1 represents a linear function in which each value of x yields a distinct value of y.

If and only if each input has precisely one output, a relation is a function. To determine whether the connection stated in the issue is a function, we must examine whether any x values have more than one output.

We may achieve this by putting the specified points on a graph and looking for vertical lines that cross the graph more than once. If so, the relationship is not a function.

We may create the following graph with the supplied points:

    |                    

8  |                    

    |                    

7  |              ●      

    |                    

6  |           ●        

    |                    

5  |                    

    |                    

4  |          ●          

    |                    

3  |              ●      

    |                    

2  |    ●                

    |                    

 1  |                    

    |                    

0  |                    

    |                    

-1 |                    

    |                    

-2 |                    

    |                    

-3 |                    

    |                    

-4 |                    

    |                    

    |_____________________

       -4  -3  -2  -1  0  1  2  3  4

Apart for the line travelling through the points (3, 2) and (4, 2), there is no vertical line that intersects the graph in more than one spot (4, -3). As a result, if x is between 3 and 4, the relation specified in the issue is not a function.

To conclude, the problem's relation is a function for all x values except x between 3 and 4.

To know more about function visit:

https://brainly.com/question/28193995

#SPJ1

By using differentials to estimate the maximum error when measuring the volume of the sphere if the possible error in measuring the radius is 0.5. It will be 32,572.03 in³. Which is option (d).

The possible error in measuring the radius of the sphere is 0.5 in

The formula for the volume of a sphere is given by V(r) = 4/3πr³

The volume of the sphere when r=72 in is given by V(72) = 4/3π(72)³

When r= 72 + 0.5 in= 72.5 in, the volume of the sphere can be calculated using the formula:

V(72.5) = 4/3π(72.5)³

The difference between these two volumes, V(72) and V(72.5), gives us the maximum error while measuring the volume of a sphere. It can be calculated as follows:

V(72.5) - V(72) = 4/3π(72.5)³ - 4/3π(72)³= 4/3π [ (72.5)³ - (72)³ ]= 4/3π [ (72 + 0.5)³ - 72³ ]= (4/3)π [ 3(72²)(0.5) + 3(72)(0.5²) + 0.5³ ]≈ (4/3)π [ 777.5 ]= 3.28 × 10⁴ in³

Therefore, the maximum error while measuring the volume of a sphere with a radius of 72 in, where the possible error in measuring the radius is 0.5 in, is approximately 3.28 × 10⁴ in³ or 32,572.03 in³. Therefore coorect option is (D).

To know more about the maximum error: https://brainly.com/question/13370015

#SPJ11

The rate of change of the distance for limousine is less than the rate of change of the convertible.

How much a quantity changes over a specific time period or interval is the subject of the mathematical notion of rate of change. Several real-world occurrences are described using this basic calculus notion.

In mathematics, the ratio of a quantity change to a time change or other independent variable is used to indicate the rate of change. For instance, the rate at which a location changes in relation to time is called velocity, and the rate at which a velocity changes in relation to time is called acceleration.

The equation of the distance travelled by the convertible is given as:

y = 35x

The equation of the limousine can be calculated using the coordinates of the graph (1, 30) and (2, 60).

The slope is given as:

slope = (change in y) / (change in x) = (60 - 30) / (2 - 1) = 30

Using the point slope form:

y - 30 = 30(x - 1)

y = 30x

So the equation of the limousine is y = 30x.

Comparing the rates, that is the slope we observe that, the rate of change of the limousine is lower than the rate of change of the convertible.

Hence, the rate of change of the limousine is less than the rate of change of the convertible.

Learn more about rate of change here:

https://brainly.com/question/29181502

#SPJ1

A right square pyramid formed by the junction of the solid would have a square-shaped cross section.

This is thus because a square pyramid has four triangular sides that meet at a shared vertex on its square base. The cross section of a pyramid formed when a plane meets it parallel to the base and perpendicular to one of the triangular sides is a square. Because the pyramid's base is square, the intersecting plane will cut all four of the triangle faces at the same distance from the peak, giving the pyramid a square shape.

Learn more about right angle triangles here:

brainly.com/question/3770177

#SPJ1

Answer:

  -10/11

Step-by-step explanation:

You want the average rate of change of f(x) on the interval [-6, 5].

The average rate of change of function f(x) on the interval [a, b] is ...

  AROC = (f(b) -f(a))/(b -a)

  = (f(5) -f(-6))/(5 -(-6))

  = (-20 -(-10))/5 +6 = (-20 +10)/(5 +6)

  AROC = -10/11

The average rate of change on the interval is -10/11.

a block slides along a track that descends through distance h. The track is frictionless except for the lower section. There the block slides to a stop in a certain distance d because of friction. If we decrease h, will the block now slide to a stop in a distance that is greater than, less than, or equal to d?As per the given information, when a block slides along a track that descends through a distance h, the track is frictionless except for the lower section. There the block slides to a stop in a certain distance d because of friction. Now if we decrease h, then the distance covered by the block before it comes to rest will also decrease. So the block will slide to a stop in a distance that is less than d. Hence the answer is less than d.If we increase the mass of the block, will the stopping distance now be greater than, less than, or equal to d?

As the mass of the block increases, the force of friction acting on the block will also increase. Hence the stopping distance will also increase. So the stopping distance now will be greater than d. Hence the answer is greater than d.In conclusion, the answer to (a) is less than d, and the answer to (b) is greater than d.

for such more questions on conclusion

https://brainly.com/question/26093731

#SPJ11

Answer:

[tex]\large\boxed{\textsf{x = 7}}[/tex]

Step-by-step explanation:

[tex]\textsf{For this problem, we are asked to find the value of x.}[/tex]

[tex]\textsf{We should simply isolate the x so that it's only on one side.}[/tex]

[tex]\large\underline{\textsf{How?}}[/tex]

[tex]\textsf{Simply use the Distributive Property for the right side of the equation.}[/tex]

[tex]\textsf{Simplify the equation to where x is by itself.}[/tex]

[tex]\large\underline{\textsf{What is the Distributive Property?}}[/tex]

[tex]\textsf{The Distributive Property is a Property that allow us to distribute expressions further.}[/tex]

[tex]\textsf{Commonly, the form is a(b+c); Where b and c are multiplied by a.}[/tex]

[tex]\large\underline{\textsf{Use the Distributive Property;}}[/tex]

[tex]\mathtt{5x-2=3(x+4)}[/tex]

[tex]\mathtt{5x-2=(3 \times x)+(3 \times 4)}[/tex]

[tex]\mathtt{5x-2=3x+12}[/tex]

[tex]\large\underline{\textsf{Add 2 to Both Sides of the Equation;}}[/tex]

[tex]\mathtt{5x-2 \ \underline{+ \ 2}=3x+12 \ \underline{+ \ 2}}[/tex]

[tex]\mathtt{5x=3x+14}[/tex]

[tex]\large\underline{\textsf{Subtract 3x from Both Sides of the Equation;}}[/tex]

[tex]\mathtt{5x-3x=3x-3x+14}[/tex]

[tex]\mathtt{2x=14}[/tex]

[tex]\large\underline{\textsf{Divide the Whole Equation by 2;}}[/tex]

[tex]\mathtt{\frac{2x}{2} = \frac{14}{2} }[/tex]

[tex]\large\boxed{\textsf{x = 7}}[/tex]

Answer:

[tex] \sf \: x = 7[/tex]

Step-by-step explanation:

Now we have to,

→ Find the required value of x.

The equation is,

→ 5x - 2 = 3(x + 4)

Then the value of x will be,

→ 5x - 2 = 3(x + 4)

→ 5x - 2 = 3(x) + 3(4)

→ 5x - 2 = 3x + 12

→ 5x - 3x = 12 + 2

→ 2x = 14

→ x = 14 ÷ 2

→ [ x = 7 ]

Hence, the value of x is 7.

Answer:

The answer is 657 and 365.

Step-by-step explanation:

Let the two numbers be x and y respectively

In first case,

x+y=1022

x=1022-y----------- eqn i

In second case

x-y=292

1022-y-y=292 [From eqn i]

1022-2y=292

1022-292=2y

730=2y

730/2=y

y=365

Substituting the value of y in eqn i

x=1022-y

x=1022-365

x=657

Hence two numbers are 657 and 365.

Pls mark me as brainliest if you got the answer

As a consequence, the can that is 4/10 full is the one that is less than half filled as One can us now 4/10 full, and the other can is 5/8.

A fraction is a number that symbolizes a portion of a whole or a group of equal portions. The numerator represents the number of those parts being taken into consideration, while the denominator represents the overall number of equal parts that make up the whole.

given

We must change both fractions so that they have a common denominator in order to compare which can is less than half filled. 10 and 8 have a least common multiple (LCM) of 40.

20/40 is equivalent to 1/2.

So,

4/10 is equal to (4/10) x (4/4) Equals 16/40.

The formula for 5/8 is (5/8) x (5/5) = 25/40.

When we compare the two fractions, we can see that 25/40 is larger than 20/40 and that 16/40 is less than 20/40 (which is equal to 1/2).

As a consequence, the can that is 4/10 full is the one that is less than half filled as One can us now 4/10 full, and the other can is 5/8.

To know more about fraction visit:

https://brainly.com/question/10354322

#SPJ1

If θ = 1π/6 then six trigonometric functions of θ are: sec(θ), cos(θ), tan(θ), cot(θ), is  [tex]((2 \sqrt{(3)})[/tex], [tex]\sqrt(3)/2[/tex], [tex]\sqrt{(3)}/3[/tex], and [tex]\sqrt{(3)[/tex], respectively.

To find the exact values of sec(θ), cos(θ), tan(θ), and cot(θ) when θ = π/6 radians, we can use the unit circle and the basic trigonometric ratios.

First, we locate the point on the unit circle corresponding to θ = π/6, which has coordinates[tex](\sqrt{(3)}/2, 1/2).[/tex]

Then, we can use the definitions of the trigonometric ratios to calculate their exact values:

sec(θ) = 1/cos(θ) = [tex]2\sqrt3 = (2 \sqrt{(3)})[/tex]

cos(θ) = adjacent/hypotenuse =[tex]\sqrt{(3)}/2[/tex]

 tan(θ) = opposite/adjacent = [tex]\sqrt{(3)}/3[/tex]

 cot(θ) = adjacent/opposite = [tex]\sqrt(3)[/tex]

Therefore, the exact values of sec(θ), cos(θ), tan(θ), and cot(θ) when θ = π/6 are [tex]((2 \sqrt{(3)})[/tex], [tex]\sqrt(3)/2[/tex], [tex]\sqrt{(3)}/3[/tex], and [tex]\sqrt{(3)[/tex], respectively.

To learn more about 'trigonometric functions':

https://brainly.com/question/25618616

#SPJ11