in this experiment, you will use universal indicator to qualitatively measure ph. the universal indicator in this experiment is a mixture of 4 common indicators allowing for a large ph range to be measured. the following table (also available in your lab manual) describes the individual components of our universal indicator. universal indicator components indicator low ph color transition ph range high ph color thymol blue (1st transition) red 1.2 - 2.8 yellow methyl red red 4.4 - 6.2 yellow bromothymol blue yellow 6.0 - 7.6 blue thymol blue (2nd transition) yellow 8.0 - 9.6 blue phenolphthalein colorless 8.3 - 10.0 fuchsia select all of the following statements that are true about the universal indicator. group of answer choices at ph 1.2, the indicator will appear red. the universal indicator is a single chemical compound. the universal indicator (or parts thereof) are in equilibrium and have an associated k value. at a ph 7, the indicator will appear colorless.

Answers

Answer 1

At PH 1.2, the indicator will appear red.

Universal indicator- The universal indicator is a mixture of 4 common indicators allowing for a large pH range to be measured.

At pH 7, the indicator will appear yellow due to bromothymol blue. The universal indicator (or parts thereof) are in equilibrium and have an associated K value.

K value- The K value indicates the amount of products and reactants present in the reaction. It is an equilibrium ratio of the concentration of products and the reactants.

A universal indicator is made by mixing bromomethyl, methyl orange and phenolpthalein in alcohol.

To learn more about "universal indicator", visit: https://brainly.com/question/2953080

#SPJ11


Related Questions

how many grams would be in a 2.7 mol sample of co2?

Answers

A 2.7 mol sample of CO2 contains 44.0 grams of CO2. This is because 1 mol of CO2 has a molar mass of 44.01 g/mol.

Therefore, the calculation would be 2.7 mol x 44.01 g/mol = 44.0 grams of CO2.  To find the answer, we need to calculate the molar mass of CO2 first. This can be done by adding up the atomic weights of the atoms present in a molecule of CO2, which is one carbon atom and two oxygen atoms. The atomic weight of carbon is 12.01 g/mol and the atomic weight of oxygen is 15.99 g/mol. Therefore, the molar mass of CO2 is 12.01 + 15.99 + 15.99 = 44.01 g/mol.

To calculate the grams of CO2 in the sample, we need to multiply the molar mass of CO2 (44.01 g/mol) with the amount of moles of CO2 in the sample, which is 2.7 mol. Therefore, the calculation will be 2.7 mol x 44.01 g/mol = 44.0 grams of CO2.

For motre questions on molar mass

https://brainly.com/question/21334167

#SPJ11

use the atomic spectroscopy interactive to answer the question. identify the wavelengths (in nanometers) of the absorption features in the sun's spectrum. list them from shortest to longest.
Wavelength 1 : ____
Wavelength 2 : ____
Wavelength 3 : ____
Wavelength 4 : ____
Wavelength 5 : ____
Wavelength 6 : ____

Answers

The H-alpha line at 656.28 nm, the H-beta line at 486.14 nm, the H-gamma line at 434.05 nm, the H-delta line at 410.17 nm, and the H-epsilon line at 397.00 nm are some of the most noticeable Fraunhofer lines in the sun's spectrum.

The Balmer series of hydrogen, which gave rise to these lines, is honored in their namesake.

Sun spectrumThe emission of light from the sun's surface, which is subsequently filtered via the sun's atmosphere, produces the sun's spectrum. Hydrogen, helium, calcium, iron, and other elements are among those found in the sun's atmosphere. Some of the light emitted by the surface of the sun is absorbed by these substances as it travels through the atmosphere, producing dark absorption lines in the spectrum.Each element has its own set of energy levels that map to particular light wavelengths that can be absorbed. The photons in the light may be absorbed when light with these particular wavelengths travels through the element, elevating the electrons' energy levels.

learn more about the sun's spectrum here

https://brainly.com/question/2021598

#SPJ1

The H-alpha line at 656.28 nm, the H-beta line at 486.14 nm, the H-gamma line at 434.05 nm, the H-delta line at 410.17 nm, and the H-epsilon line at 397.00 nm are some of the most noticeable Fraunhofer lines in the sun's spectrum.

The Balmer series of hydrogen, which gave rise to these lines, is honored in their namesake.

The emission of light from the sun's surface, which is subsequently filtered via the sun's atmosphere, produces the sun's spectrum. Hydrogen, helium, calcium, iron, and other elements are among those found in the sun's atmosphere.

Some of the light emitted by the surface of the sun is absorbed by these substances as it travels through the atmosphere, producing dark absorption lines in the spectrum.

Each element has its own set of energy levels that map to particular light wavelengths that can be absorbed.

The photons in the light may be absorbed when light with these particular wavelengths travels through the element, elevating the electrons' energy levels.

Learn more about the sun's spectrum here:

brainly.com/question/2021598

#SPJ1

methanol occurs naturally and has several isomers. state the structural feature of menthol which is responsible for it having enantiomers

Answers

Menthol, like methanol, occurs naturally and has several isomers. One structural characteristic of menthol that is responsible for it having enantiomers is that it has a chiral center.

Chiral centers are atoms with four different substituents attached to them, and they are a type of stereocenter. Menthol has a chiral center, which means it has two possible enantiomers.

Enantiomers are molecules that are mirror images of each other and cannot be superimposed on one another.

The two enantiomers of menthol are (1R,2S,5R)-(−)-menthol and (1S,2R,5S)-(+)-menthol. They have identical physical and chemical properties, except for their interaction with polarized light. This is due to the fact that they rotate plane-polarized light in opposite directions.

To learn more about "menthol", visit: brainly.com/question/21296029

#SPJ11

if 1.04 g of chlorine gas occupies a volume of 872 ml at a particular temperature and pressure, what volume will 2.08 g of chlorine gas occupy under the same conditions?

Answers

If 1.04 g of chlorine gas occupies a volume of 872 ml at constant temperature and pressure, 2.08 g of chlorine gas would occupy 436 ml.

The given data for the question is:

Initial Volume = 872 mlInitial Mass of Chlorine gas = 1.04 gFinal Mass of Chlorine gas = 2.08 g

Since the temperature and pressure are constant, we can use the formula,

V1/V2 = n1/n2

Therefore, Initial Volume/Final Volume = Initial mass/Final mass

V1/V2 = n1/n2

Where,

Initial Mass of Chlorine = Final Mass of ChlorineInitial Volume/V2 = 1.04/2.08

Final Volume = 872/2 = 436 ml

Thus, the final volume of the chlorine gas is 436 ml when the initial mass is 1.04g and the final mass is 2.08g at constant temperature and pressure.

Learn more about temperature: https://brainly.com/question/25677592

#SPJ11

4. A sample of water with a mass of 785 g and a starting temperature of
15.0°C is heated. What would the final temperature of the water be if 250,000
joules of heat are added to the water?(Ans: 91°C)

Answers

The final temperature of the water would be approximately 91°C after 250,000 joules of heat are added.

Describe Heat Capacity?

Heat capacity is the amount of heat energy required to increase the temperature of a substance by one degree Celsius (or one Kelvin). It is a measure of how much energy a substance can absorb without a significant change in its temperature.

The heat capacity of a substance depends on its mass and composition. Substances with more mass or more complex molecular structures generally have higher heat capacities, meaning they require more energy to increase their temperature than substances with less mass or simpler molecular structures.

To solve this problem, we can use the specific heat capacity formula:

Q = m * c * ΔT

where Q is the amount of heat transferred, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.

We can rearrange this formula to solve for ΔT:

ΔT = Q / (m * c)

We are given the mass of the water (m = 785 g), the amount of heat added (Q = 250,000 J), and the specific heat capacity of water (c = 4.184 J/g°C).

Substituting these values into the equation, we get:

ΔT = 250,000 J / (785 g * 4.184 J/g°C)

ΔT ≈ 75.4°C

Therefore, the final temperature of the water would be:

15.0°C + 75.4°C = 91 °C

So the final temperature of the water would be approximately 91 °C after 250,000 joules of heat are added.

To know more about capacity visit:

https://brainly.com/question/28921175

#SPJ1

Part A Classify these amino acids as acidic, basic, neutral polar, or neutral nonpolar Drag each item to the appropriate bin. Hints Reset Help -NH2 CH3 CH3 CH NH2 CH2 H,N-C-coo Acidic Basic Neutral polar Neutral nonpolar My Answers Give Up Part B Classify these amino acids as acidic, basic, neutral polar, or neutral nonpolar Drag each item to the appropriate bin. Hints Reset Help OH CH2 HON-C-COO H,N-C-COO Acidic Basic Neutral polar Neutral nonpolar

Answers

Amino acids as acidic, basic, neutral polar, or neutral nonpolar are

Part A: NH₂: Basic, CH₃: Neutral nonpolar, CH₃: Neutral nonpolar, CH: Neutral nonpolar, NH₂: Basic, CH₂: Neutral nonpolar, H,N-C-coo: Acidic

Part B: OH: Neutral polar, CH₂: Neutral nonpolar, HON-C-COO: Acidic, H,N-C-COO: Acidic.

Acidic amino acids: These amino acids have a carboxyl group (COOH) in their side chain, which makes them acidic. They can donate a hydrogen ion (H+) and have a negative charge at physiological pH.

Basic amino acids: These amino acids contain an amino group (NH2 or NH3+) in their side chain, which makes them basic. They can accept a hydrogen ion (H+) and have a positive charge at physiological pH.

To learn more about the Amino acids, follow the link:

https://brainly.com/question/31872499

#SPJ12

The following are the main steps in the formation of an 'action potential'. Which of the following lists the steps in the correct sequential order? (Not every step may be given, however the given steps should be in the correct sequence) (hint - step # 3 is the last step)
1. voltage-gated Na+ channels are inactivated
2. voltage-gated K+ channels open and K+ move out of the cell
3. voltage-gated Na+ channels regain their normal properties
4. a graded depolarization brings an excited membrane to threshold potential
5. a temporary hyperpolarization occurs
6. voltage-gated Na+ channel activation occurs
7. Na+ enter the cell and depolarization occurs

Answers

The correct sequence of steps in the formation of an action potential is as follows: 4. a graded depolarization brings an excited membrane to threshold potential, 6. voltage-gated Na+ channel activation occurs, 7. Na+ enter the cell and depolarization occurs, 1. voltage-gated Na+ channels are inactivated, 2. voltage-gated K+ channels open and K+ move out of the cell, 3. voltage-gated Na+ channels regain their normal properties, and 5. a temporary hyperpolarization occurs.
Explanation: Action potential is generated when a neuron sends information down an axon, away from the cell body. The steps involved in the formation of an action potential are:Graded depolarization occurs, which brings an excited membrane to threshold potential.Na+ enters the cell and depolarization occurs.Voltage-gated Na+ channel activation occurs.Voltage-gated Na+ channels are inactivated.Voltage-gated K+ channels open and K+ move out of the cell.A temporary hyperpolarization occurs.Voltage-gated Na+ channels regain their normal properties, which complete the cycle.Action potential is a result of ions moving in and out of the cell membrane, which changes the voltage difference between the inside and outside of the cell membrane. Action potential, therefore, involves the sequential opening and closing of different types of voltage-gated ion channels, including sodium (Na+) and potassium (K+) channels.

For more such questions on hyperpolarization

https://brainly.com/question/15997473

#SPJ11

Part A Inhibition of which of the following metabolic pathways would result in decreased rates of CO2 production? O fermentation and glycolysis O oxidation of pyruvate to acetyl CoA and the citric acid cycle glycolysis and the oxidation of pyruvate to acetyl COA O oxidative phosphorylation and fermentation Submit Request Answer Provide Feedback hapter 10 apter 10 Question 11 12 of Part A A mutation that disrupts cyclic electron flow in the light reactions of photosynthesis will specifically reduce the production of which of the following molecules? O NADPH O CO2 O ATP ADP and NADP Submit Recuest Answer Provide Feedback Part A Which of the following statements best summarizes the metabolic results of photorespiration? O ATP is hydrolyzed, oxygen is produced, and carbon dioxide is consumed. O ATP is hydrolyzed, carbon dioxide is produced, and oxygen is consumed. O ATP is produced, oxygen and carbon dioxide are consumed. O ATP and oxygen are produced and carbon dioxide is consumed. Submit Request Answer < Return to Assignment Provide Feedback

Answers

Photorespiration is a process which occurs in plants when there is not enough CO2 available for photosynthesis, resulting in the hydrolysis of ATP.

During photorespiration, oxygen is consumed and carbon dioxide is produced.

The light reactions of photosynthesis produce NADPH and ATP, and when cyclic electron flow is disrupted due to a mutation, the production of NADPH will be reduced.

Without NADPH, the Calvin cycle will not proceed, resulting in the production of glycolic acid, which is further broken down to form glycine, ammonia and carbon dioxide.

This process results in the hydrolysis of ATP and the consumption of oxygen, with the production of carbon dioxide as a by-product.

Photorespiration results in the hydrolysis of ATP, the consumption of oxygen and the production of carbon dioxide.

to know more about photorespiration refer here:

https://brainly.com/question/13433623#

#SPJ11

The reaction in which two compounds exchange their ions to form two new compounds is called:a. a displacement reaction b. a decomposition reaction a. an isomerization reaction a. a metathesis reaction

Answers

The reaction in which two compounds exchange their ions to form two new compounds is called decomposition reaction. Option (a) is correct.

Decomposition reaction is defined as a reaction in which a compound breaks down into two or more simpler substances. The general form of the decomposition reaction can be written as,

            AB → A+B.

This type of reaction require an input of energy in the form of heat, light, or electricity. It occurs when one reactant breaks down into two or more products. Some examples of decomposition reactions involves the breakdown of hydrogen peroxide to water and oxygen and the breakdown of water to hydrogen and oxygen. This is called the the process or effect of simplifying a single chemical entity into two or more fragments. This reaction is usually regarded and defined as the exact opposite of chemical synthesis .

To learn more about Decomposition reaction

https://brainly.com/question/16728382

#SPJ4

Which of the following is a Lewis acid?a. CH4
b. BCl3
c. CHCl3
d. NH3
e. None of the above are Lewis acids

Answers

The Lewis acid is the one that accepts electrons from the donor atom. Option 'b' [tex]BCl_3[/tex] is the Lewis acid of the following options.  

A Lewis acid is a species that accepts an electron pair to form a covalent bond. The acid accepts the pair of electrons and, as a result, is referred to as an electrophile. The Lewis acid reacts with the Lewis base to form a covalent bond by transferring the electron pair. It forms coordinate covalent bonds by accepting a pair of electrons from the Lewis base in its outermost shell.The Lewis acid is the one that accepts electrons from the donor atom. [tex]CH_4[/tex], [tex]CHCl_3[/tex], and [tex]NH_3[/tex] all have a lone pair of electrons that can be donated. Therefore, they are Lewis bases. [tex]BCl_3[/tex] is the Lewis acid of the following options. Therefore, option (b) is the correct answer.

Learn more about Lewis acid: https://brainly.com/question/28299444

#SPJ11

1.choose your dream car
Car year, make and model
2. Car year make model for second car
3. Miles per gallon on the highway for the first car
4.miles per gallon on the highway for second car
5. Balanced equation for the combustion of octane write the coefficients in order
In the picture look please
6. Assume you drive 15,000 miles in one year calculate the number of gallons of gas online your car uses in one year
7.convert gallons to mL( 1 gallon =3785.4mL)
8. Assume you drive the second car 15,000 miles in one year calculate the number of gallons of gas online your car uses In one year
9.convert gallons to mL for the second car (1 gallon = 3785.4mL)
Which are is more efficient in terms of gas use?

Answers

Dream car: 2022 Tesla Model S; Second car: 2022 Toyota Camry

If the price of gas is $3.00 per gallon, how much money would you spend on gas in one year for your dream car and the second car?

To calculate the amount spent on gas in one year for each car, we need to multiply the number of gallons of gas used in one year by the price per gallon.

For the dream car: 426.9 gallons x $3.00/gallon = $1280.70 spent on gas in one year.

For the second car: 500 gallons x $3.00/gallon = $1500 spent on gas in one year.

Therefore, you would spend $1280.70 on gas for the dream car and $1500 on gas for the second car in one year.

The Tesla Model S is an electric car, so it does not have miles per gallon on the highway.

The Toyota Camry has a highway mpg of 39.

Balanced equation for the combustion of octane: 2C8H18 + 25O2 → 16CO2 + 18H2O

The first car (Tesla Model S) uses no gasoline, so it does not use any gallons of gas in one year.

Converting 1 gallon to mL: 1 gallon = 3785.4 mL

Assuming you drive the Toyota Camry 15,000 miles in one year and get 39 mpg on the highway: 15,000 miles ÷ 39 miles per gallon = 384.6 gallons

Converting gallons to mL: 384.6 gallons x 3785.4 mL/gallon = 1,455,047.64 mL

The second car (Toyota Camry) uses 384.6 gallons of gas in one year.

Converting gallons to mL for the second car: 384.6 gallons x 3785.4 mL/gallon = 1,455,047.64 mL

The Tesla Model S is more efficient in terms of gas use since it uses no gasoline.

Learn more about gallon here:

https://brainly.com/question/9917229

#SPJ1

What is/are the spectator ion(s) for the reaction of perchloric acid with sodium hydroxide? Select ALL of the spectator ions from the list below.a. Na+b. CO2c. O2d. Cl-

Answers

Sodium ion, Na+ and chloride ion, Cl- are the spectator ions of the reaction of perchloric acid with sodium hydroxide. Therefore, options a and d are correct.

What are spectator ions?

Spectator ions are ions that do not undergo a chemical reaction in a chemical equation, and they are in solution in their original form. The balanced chemical equation for the reaction of perchloric acid with sodium hydroxide is:

HClO4(aq) + NaOH(aq) → NaClO4(aq) + H2O(l)

In the reaction above, sodium hydroxide reacts with perchloric acid to form sodium perchlorate and water. During the reaction, H+ and OH- ions combine to form water (H2O) and cancel each other out. This makes them spectator ions. Also, sodium and chloride ions are already present in their original form before and after the reaction. They remain the same, which makes them spectator ions. CO2 and O2 are not spectator ions in this reaction; hence, they are incorrect as possible options in this question.

Learn more about spectator ions on:

https://brainly.com/question/29208113

#SPJ11

how many milliliters of 0.20 m hcl is required to neutralize 50.0 ml of 0.80 m naoh?

Answers

To neutralize 50.0 mL of 0.80 M NaOH, 200 mL of 0.20 M HCl are needed.

How is neutralization calculated?

When sodium hydroxide (NaOH) and hydrochloric acid (HCl) are mixed, sodium chloride (NaCl) and water (H2O) are the results. The chemical formula for the neutralizing reaction is as follows:NaOH+HClNaCl+H2O.

We must apply the following balanced chemical equation for the neutralization reaction to calculate how much HCl is needed to neutralize 50.0 mL of 0.80 M NaOH:

HCl + NaOH NaCl + H2O

One mole of HCl interacts with one mole of NaOH to form one mole of NaCl and one mole of water, as shown by the equation.

Let's first determine the quantity of NaOH in moles.

Moles of NaOH = volume (in liters) x molarity

Moles of NaOH = 50.0 mL x (1 L/1000 mL) x 0.80 M

Moles of NaOH = 0.040 moles

moles of HCl = volume (in liters) x molarity

0.040 moles = volume (in liters) x 0.20 M

Volume (in liters) = 0.040 moles / 0.20 M

Volume (in liters) = 0.20 L

Finally, we can convert the volume from liters to milliliters:

Volume (in milliliters) = 0.20 L x (1000 mL/1 L)

Volume (in milliliters) = 200 mL

To know more about NaOH visit:-

https://brainly.com/question/29854404

#SPJ1

Predict the organic starting material needed to prepare the following product upon treatment with warm hydrochloric acid. CI Cl 석C HCI 40 *C H,C CH HC

Answers

Vinyl chloride (CH2=CHCl) is most likely the initial substance required to prepare the product after treatment with heated hydrochloric acid. A hydrochlorination procedure creates 1,2-dichloroethane as a byproduct by adding HCl across the vinyl chloride double bond.

Alkenes frequently undergo the hydrochlorination process, in which HCl is added across the double bond to produce a chloroalkane byproduct. In this instance, a vinyl chloride, which possesses a double bond between the carbon and chlorine atoms, is most likely the beginning substance. Warm HCl fractures the double bond, allowing the H and Cl atoms to add across the carbon atoms to create 1,2-dichloroethane as a byproduct. This response can be modelled as:

CH2 = CHCl + HCl ClCH2CH2Cl

All in all, this is a straightforward reaction that can be performed on a small scale in a lab or on a larger scale in industry to make 1,2-dichloroethane, which is utilised as a solvent and in the creation of vinyl chloride monomer.

learn more about hydrochloric acid here:

https://brainly.com/question/15231576

#SPJ4

A catalyst will have no impact on the Select the correct answer below. a. position of an equilibrium b. rate at which a system reaches equilibrium c. energy of the transition state of the equilibrium d. none of the above

Answers

A catalyst will not have an impact on the position of equilibrium. Therefore option a is the correct answer.

What are catalysts?

Specifically, a catalyst is a substance that increases the rate of a chemical reaction without being consumed in the process. It does this by providing an alternative reaction pathway with a lower activation energy, which increases the reaction rate and therefore speeds up the rate at which equilibrium is achieved. The transition energy of the equilibrium is also lowered, meaning it will be easier for the reaction to move from the reactants to the products.

Therefore catalysts can alter the rate at which a reaction proceeds, but they cannot influence the position of equilibrium.

learn more about catalyst

https://brainly.com/question/318426

#SPJ11

liquid methanol has a standard molar entropy of 126.8 j/k-mol at 298.15 k. use the following data to find the standard molar entropy of gaseous methanol at the same temperature. compare your answer to the experimental value of 239.8 j/k-mol.. Calculate the entropy of methanol vapor at 800 K.

Answers

The entropy of methanol vapor at 800 K is calculated to be 185.4 J/(K mol).

The standard molar entropy (S°) is the entropy of one mole of a substance in its normal state (solid, liquid, or gas) at a standard pressure of 1 bar.

Standard molar entropy of liquid methanol

S° of liquid methanol = 126.8 J/(K mol)

Standard molar entropy of gaseous methanol

The standard molar entropy of gaseous methanol (CH₃OH) can be calculated as follows:

S° of gaseous CH₃OH = S° of liquid CH₃OH + R × ln (P2/P1)

Where, P1 = 1 bar (standard pressure) P2 = vapor pressure of CH₃OH at 298.15 K = 98.8 kPa

R = gas constant = 8.314 J/(K mol)

S° of gaseous CH₃OH = 126.8 J/(K mol) + 8.314 J/(K mol) × ln (98.8 kPa/1 bar)

S° of gaseous CH₃OH = 185.4 J/(K mol)

The entropy of methanol vapor at 800K

The change in entropy of vaporization of methanol can be calculated as follows: ΔSvap = ΔHvap/T

Where, ΔHvap = enthalpy of vaporization = 35.2 kJ/mol

T = temperature = 800 K (in Kelvin)

Convert ΔHvap from kJ/mol to J/mol by multiplying by 1000.

ΔSvap = (35.2 × 1000 J/mol)/800 K

ΔSvap = 44.0 J/(K mol)

Therefore, the entropy of methanol vapor at 800 K is 44.0 J/(K mol).

The experimental value of the standard molar entropy of gaseous methanol at 298.15 K is 239.8 J/(K mol).

The calculated value of the standard molar entropy of gaseous methanol at 298.15 K is 185.4 J/(K mol).

Therefore, the calculated value is less than the experimental value.

Learn more about standard molar entropy here:

https://brainly.com/question/30649683

#SPJ11

10 ml of ethanol is mixed with 250 ml of water calculate the volume percentage of ethanol

Answers

Answer: 3.85%

Explanation: To calculate the volume percentage of ethanol in the mixture, we need to determine the total volume of the mixture first.

Total volume = volume of ethanol + volume of water

Total volume = 10 ml + 250 ml

Total volume = 260 ml

Now, we can calculate the volume percentage of ethanol in the mixture using the following formula:

Volume percentage of ethanol = (volume of ethanol ÷ total volume) x 100%

Plugging in the values, we get:

Volume percentage of ethanol = (10 ml ÷ 260 ml) x 100%

Volume percentage of ethanol = 3.85%

Therefore, the volume percentage of ethanol in the mixture is 3.85%.

Lead can be prepared from galena [lead(II) sulfide] by first roasting the galena in oxygen gas to form lead(II) oxide and sulfur dioxide. Heating the metal oxide with more galena forms the molten metal and more sulfur dioxide.


(a) Write a balanced equation for each step, including the state of each chemical.


(1)


(2)


(b) Write an overall balanced equation for the process, including the state of each chemical.

Answers

The answer of the following following questions are PbO(s) + PbS(s) → 2Pb(l) + SO2(g) and  2PbS(s) + 3O2(g) → 2Pb(l) + 2SO2(g)

What is chemical reaction ?

A chemical reaction is a process in which one or more substances (reactants) are transformed into new substances (products) by the breaking and formation of chemical bonds. During a chemical reaction, the arrangement of atoms in the reactants is changed to form different molecules or compounds.

In a chemical reaction, the reactants are transformed into products through the rearrangement of atoms, but the total number of atoms remains the same. This is known as the law of conservation of mass, which states that matter cannot be created or destroyed in a chemical reaction.

(a)

Step 1: Roasting of galena in oxygen gas:

PbS(s) + 3O2(g) → PbO(s) + 2SO2(g)

Step 2: Heating the metal oxide with more galena:

PbO(s) + PbS(s) → 2Pb(l) + SO2(g)

(b) Overall balanced equation for the process:

2PbS(s) + 3O2(g) → 2Pb(l) + 2SO2(g)

Note: The state of the reactants and products has been indicated in the equations, with (s) representing a solid, (g) representing a gas, and (l) representing a liquid.

To know more about reaction visit :-

https://brainly.com/question/11231920

#SPJ1

Which of the following factors is unique for each substance when calculating the energy change associated with a change in temperature?A) massB) enthalpyC) temperature changeD) specific heat

Answers

The answer to this question is D) specific heat. When determining the energy change associated with a change in temperature, specific heat is a factor that is unique to each substance.

Specific heat- Specific heat is the amount of heat that must be added or removed from a unit of mass of a substance to increase or decrease its temperature by one degree Celsius or Kelvin. The amount of heat required to alter the temperature of a material varies depending on the nature of the substance. As a result, specific heat is a factor that is unique to each substance.

D) specific heat is correct because it is the unique factor for each substance when calculating the energy change associated with a change in temperature.

In conclusion, it is important to consider that when determining the energy change associated with a change in temperature, specific heat is a factor that is unique to each substance.

To learn more about "energy change", visit: brainly.com/question/30083274

#SPJ11

Molar Mass

What is the molar mass of a gas that has a density of 1.02 g/L at 0.990 atm pressure and 37 degrees C

Answers

Answer:

The molar mass of the gas is approximately 32.0 g/mol.

Step -by-step explanation:

To calculate the molar mass of the gas, we need to use the ideal gas law, which relates the pressure (P), volume (V), number of moles (n), and temperature (T) of a gas:

PV = nRT

where R is the gas constant.

To solve for the number of moles, we can rearrange this equation as:

n = PV/RT

We are given the density (ρ) of the gas, which is related to the molar mass (M) and the volume by:

ρ = PM/RT

Rearranging this equation, we can solve for the molar mass:

M = ρRT/P

Now we can substitute in the given values:

ρ = 1.02 g/L
T = 37°C + 273.15 = 310.15 K
P = 0.990 atm

We also need to convert the density from g/L to kg/m³:

ρ = 1020 g/m³

Using the gas constant R = 0.08206 L atm/mol K, we get:

M = (1020 g/m³) (0.08206 L atm/mol K) (310.15 K) / (0.990 atm)
M ≈ 32.0 g/mol

Therefore, the molar mass of the gas is approximately 32.0 g/mol.

fermentation in certain types of yeast occurs in the ___________ of oxygen.

Answers

Fermentation in certain types of yeast occurs in the absence of oxygen.

Fermentation is an anaerobic metabolic process that occurs in the absence of oxygen, which converts sugar into cellular energy, primarily adenosine triphosphate (ATP), and produces carbon dioxide and alcohol as waste products. Fermentation is used in a variety of industrial and food production processes. Yeast, a type of fungus, is used to ferment carbohydrates and produce carbon dioxide and alcohol in bread baking, winemaking, and beer brewing. Lactobacilli bacteria are used in the production of yogurt and cheese by fermenting milk lactose.

There are two types of fermentation processes: alcoholic fermentation and lactic acid fermentation.

Alcoholic fermentation is a metabolic process that produces alcohol and carbon dioxide from carbohydrates, typically sugars. Yeast and certain bacteria are the most common types of organisms that undergo alcoholic fermentation. In lactic acid fermentation, the bacteria or yeast convert the sugar into lactic acid instead of ethanol. The lack of oxygen in the fermentation process is an essential factor. During fermentation, oxygen is not required as it would serve as a toxin to the fermenting yeast, which is why it happens in the absence of oxygen. Yeast obtains energy in the form of adenosine triphosphate (ATP) through anaerobic respiration when oxygen is absent.

for such more question on Fermentation

https://brainly.com/question/11554005

#SPJ11

a 1m solution contains 20 grams of solute in 500ml of solution. what is the mass of 1 mole of solute

Answers

The mass of 1 mole of solute dissolved to make the solution will be 40 g/mol (mass of 1 mole of solute).

How to determine mass?

To determine the mass of 1 mole of solute, we can use the molar mass of the solute. The formula for molar mass is:
Molar Mass = Mass of Solute ÷ Number of Moles

Let's use this formula to solve the problem:
Mass of Solute = 20 grams
Volume of Solution = 500 mL = 0.5 L
Concentration of Solution = 1 M
Number of Moles of Solute = Concentration × Volume = 1 M × 0.5 L = 0.5 mol

Now, we can use the molar mass formula to calculate the mass of 1 mole of solute:
Molar Mass = Mass of Solute ÷ Number of Moles
Molar Mass = 20 grams ÷ 0.5 mol
Molar Mass = 40 grams/mol

Therefore, the mass of 1 mole of solute is 40 grams.

Learn more about Mass here:

https://brainly.com/question/19694949


#SPJ11

Hydrogen is used as a rocket fuel because it is very light and reacts explosively and completely with oxygen. For the combustion reaction 2H2(g) + O2(g) = 2H2O(g) what is the likely magnitude of the equilibrium constant K? K < 10^-3 10^-3 10^3

Answers

The likely magnitude of the equilibrium constant K for the combustion reaction 2H₂(g) + O₂(g) = 2H₂O(g) is 10^3.

The equilibrium constant K is a measure of the extent of a chemical reaction at equilibrium, and it is given by the ratio of the products to the reactants, with each species raised to a power equal to its stoichiometric coefficient. For the combustion reaction of hydrogen and oxygen, the equilibrium constant K can be calculated as,

K = ([H₂O]^2) / ([H₂]^2[O₂])

Since the combustion reaction of hydrogen and oxygen is highly exothermic, the products (water molecules) are favored at equilibrium. This means that the concentration of water molecules will be much higher than the concentrations of hydrogen and oxygen molecules, leading to a large value of K. In this case, the likely magnitude of the equilibrium constant K is 10^3, indicating that the combustion reaction is highly favored at equilibrium.

To know more about hydrogen, here

brainly.com/question/14852040

#SPJ4

Classify the reaction: N2 (g) + 3H2 (g) à 2NH3 (g)

Answers

The given reaction N2 (g) + 3H2 (g) à 2NH3 (g) is an example of combination reaction.

Chemical reaction: Simple conversion of one or more reactants into products is what happens in chemical reactions. A chemical reaction has occurred when there is a change in color, temperature, or the evolution of a gas.In a direct combination reaction, two or more substances or elements come together to form a single substance. Equations of the following form: X + Y XY are used to depict such reactions. A reaction called a combination occurs when two or more components combine to form a compound.Hydrogen and nitrogen are the two reactants in this reaction, which results in the formation of a single product, ammonia gas.

As a result, it is a combination reaction.

For more information on combination reaction kindly visit to

https://brainly.com/question/3664113

#SPJ1

what is oxygen friend and why would they be friend with oxygen

Answers

Answer:

oxygen friend

Explanation:

It is generally believed that the Earth's atmosphere did not contain oxygen until around 2500 million years ago (Mya) when oxygen-evolving photosynthetic bacteria arose. At around 800–500 Mya, the oxygen concentration increased sharply to reach the 21% we have today. So, it seems highly likely that life arose as anaerobic organisms, which then evolved to tolerate oxygen and finally, to use it as a terminal acceptor for the energy-producing oxidative processes in the respiration of aerobic bacteria and mitochondria in eukaryotic cells. The respiratory processes employed by typical aerobic organisms today have a wide range of mechanisms to deal with the troublesome side effects of living with a high oxygen concentration.

According to the kinetic molecular theory, the particles of an ideal gas

a. Have no potential energy

b. Have strong intermolecular forces

c. Are arranged in a regular, repeated geometric pattern

d. Are separated by great distances, compared to there size

Answers

According to the kinetic molecular theory, the particles of an ideal gas are separated by great distances, compared to there size. Hence option D is correct.

A large number of submicroscopic particles, including atoms and molecules, are used in the kinetic theory of gases, a theoretical model for characterizing the molecular composition of gases. The idea also states that atmospheric pressure is the result of particles colliding with each other and the walls of containers.

According to the kinetic hypothesis, gases are composed of many submicroscopic particles (atoms or molecules), all of which are in continuous random motion. The walls of the container and the fast moving particles that collide are constant and are separated by great distances, compared to there size.

To know more kinetic theory of gases, visit,

https://brainly.com/question/11067389

#SPJ4

Which aqueous solution has the lowest freezing point?
1. 1.0 M C6H12O6
2.1.0 M C2H5OH
3.1.0 M CH3COOH
4.1.0 M NaCl

Answers

According to the given Information:

The aqueous solution that has the lowest freezing point is 1.0 M C2H5OH (ethanol).

How does the type of solute affect the freezing point depression of an aqueous solution?

Because it determines the concentration of solute particles in the solution.

Ionic solutes, such as NaCl, dissociate into multiple ions in water, producing a higher concentration of solute particles per unit concentration than molecular solutes, such as ethanol.

This results in a greater degree of freezing point depression for ionic solutes than molecular solutes.

What is an aqueous solution?

An aqueous solution is one in which water serves as the solvent.

Aqueous solutions are very common in nature and in laboratory settings. Many substances can dissolve in water to form aqueous solutions, including salts, acids, bases, and gases.

Aqueous solutions are important in many fields of science, including chemistry, biology, and environmental science.

To know more about aqueous solution, visit:

https://brainly.com/question/13608038

#SPJ1

In which solvent AgCl is most soluble?

Answers

The concentration of ammonia in the solvent rises, the solubility of AgCl increases. Thus, in the solvent aqueous ammonia, AgCl is most soluble.

AgCl is most soluble in aqueous ammonia. AgCl is a chemical compound that is formed when silver nitrate and hydrochloric acid are combined. It is a white solid that is moderately soluble in water.

The solubility of AgCl in various solvents, such as water, ethanol, and aqueous ammonia, has been studied. AgCl is most soluble in aqueous ammonia.

When AgCl is dissolved in aqueous ammonia, a complex ion called the diammine silver(I) cation, [Ag(NH3)2]+, is formed. The AgCl crystal structure is disrupted by the presence of ammonia molecules, resulting in increased solubility. Here is the equation for the dissolution of AgCl in aqueous ammonia:

AgCl(s) + 2NH3(aq) → [Ag(NH3)2]+(aq) + Cl−(aq)

The solubility of AgCl in aqueous ammonia is temperature-dependent. As the temperature increases, the solubility of AgCl in aqueous ammonia increases. As the temperature decreases, the solubility of AgCl in aqueous ammonia decreases.

for such more question on aqueous ammonia

https://brainly.com/question/14672082

#SPJ11

An experiment on the vapor-liquid equilibrium for the methanol (1) + dimethyl carbonate (2) system at 337.35 K provides the following information:
x1 = 0.0, y1 = 0.0 and P = 41.02 kPa
x1 = 0.20, y1 = 0.51 and P = 68.23 kPa
x1 = 1.0, y1 = 1.0 and P = 99.91 kPa
Use this information to estimate the system pressure and vapor-phase mole fraction when x1 = 0.8. Use the 1-parameter Margules equation.

Answers

To estimate the system pressure and vapor-phase mole fraction when x1 = 0.8, we can use the 1-parameter Margules equation.

This equation assumes that the vapor-liquid equilibrium is a linear relationship between the mole fraction of each component.

Since the given experiment gives us three points, we can use linear interpolation to estimate the parameters of the Margules equation.

From the given experiment, we know the values for x1, y1, and P when x1 = 0.0, 0.2, and 1.0 respectively. Therefore, we can calculate the slope and y-intercept of the Margules equation as follows:

Slope = (P2 - P1)/(y2 - y1) = (68.23 - 41.02)/(0.51 - 0.0) = 68.23

y-intercept = P1 - (slope * y1) = 41.02 - (68.23 * 0.0) = 41.02

Using these values and the x1 value of 0.8, we can then estimate the system pressure and vapor-phase mole fraction as follows:


System Pressure = (slope * 0.8) + y-intercept = (68.23 * 0.8) + 41.02 = 78.2 kPa

Vapor-phase Mole Fraction = (System Pressure - y-intercept) / slope = (78.2 - 41.02) / 68.23 = 0.80


Therefore, the estimated system pressure and vapor-phase mole fraction when x1 = 0.8 is 78.2 kPa and 0.80 respectively.

For more information about Margules equation refer here

https://brainly.com/question/14103505?

#SPJ11

Arrange the following oxyacids in order of decreasing acid strength.Rank from strongest to weakest acid. To rank items as equivalent, overlap them.HClO2, HCLO, HBrO, HClO3

Answers

The order of oxyacids in decreasing acid strength is:

HClO3HClO2HClOHBrO

What is the order of oxyacids based on?

This order of  oxyacids is based on the number of oxygen atoms bonded to the central atom (in this case, Cl or Br) and the strength of the bond between the central atom and the oxygen atoms. The more oxygen atoms that are bonded to the central atom, the stronger the acid. Additionally, the strength of the bond between the central atom and the oxygen atoms increases as the electronegativity difference between the two atoms increases, making the acid stronger. HClO3 has the most oxygen atoms and the strongest bond, making it the strongest acid, while HBrO has the fewest oxygen atoms and the weakest bond, making it the weakest acid.

Find more exercises on  oxyacids;

https://brainly.com/question/14179541

#SPJ1

Other Questions
based on these graphs, how has hunting caused evolution of bighorn sheep mass and horn length over time? 6TH GRADE MATH, WRITE THE EQUATION FOR THIS GRAPH IN THE FORM OF Y=MX+B, TYSM When RNA polymerase reaches a specific sequence of nucleotides on the DNA called the transcription terminator, a hairpin loop structure forms on the DNA strand causing the RNA polymerase and mRNA to dissociate from the DNA.a)Trueb)False Write a thesis statement for should death penalty be banned ? List 3 reason should death penalty be banned ? When the price of radios decreases 5%, quantity demanded increases 5%. The price elasticity of demand for radios is ________ and total revenue from radio sales will ________. Complete the function CountCharacters0 that takes one string parameter and one character parameter. The function returns the number of characters in the string that are not equal to the character parameter. Ex if the input is bkvt g, then the outpot is: } int main (){string instring; char x; int result; cin inString;cin xresult = CountCharacters (inString, x)cout result endl;return ;} find the following answer Communists are covered under the Civil Rights Act. true or falseandThe first law regarding civil rights was the Civil Rights Act. true or false what device is used to shunt transient current to ground in the event of an indirect lightning strike? PLEASE HELP! whoever answers right get brainliest!!! Six police officers A, B, C, P, Q and R were saluting on Independence Day in such a way that was second to the left of Q but immediate right of A. There was one police officer between B and P. B and S Were not at any end of the row. P and Q were neighbors. Who was at the extreme left? Corey is ready to begin the process of producing his final animation. Unfortunately,his computer does not have the power to render the final scene, so he outsourcesthe render to a computer that will execute the function. What method allows him todo this?(1 point)O image sequencesObatch renderO net renderingO multi-passing My summer internship with RoundWorld Travel gave me the chance to refine my already stellar interpersonal and written communication skills through daily interactions with clients and coworkers, weekly all-staff meetings, and the composition of account status reports. In fact, I communicated even better than my supervisor, who said he wished he were as gifted as I am.What revision advice would you give the writer of this qualifications paragraph?Highlight how many status reports you completed.Include the supervisors actual comments.Give the impression of confidence without sounding arrogant.What should you include in the qualification section of your message? Check all that apply.Explanations of why you have no prior or related work experienceInterpretations of how your education or experience are meaningful job preparationReferences and contact information Use the slope and y-intercept to identify the equation of this line. Which of these is a reasonable conclusion from finding ancient ball courts and cave paintings of ancient athletic competitions?People have always been a little barbaric.Sports have been culturally significant for a long time.Soccer was the world's first sport.The Olympics began in Ancient Greece. classify each scenario according to whether it is an example of an active employment at-will doctrine. based an your experiments in the previous section, how does tie ouserved relatve brightnes of a starchanger, if the price of peanut butter were to increase, what would likely happen to the demand for jelly? Can someone write the steps to how to make homemade ice cream (at least 6 steps) in detail Orion Iron Corporation tracks the number of units purchased and sold throughout each year but applies its inventory costing method at the end of the year, as if it uses a periodic inventory system. Assume its accounting records provided the following information at the end of the annual accounting period, December 31 .Transactions Units Unit.cost a. Inventory, Beginning 300 $ 12For the year: b. Purchase, April 11 900 10 c. Purchase, June 1 800 13d. Sale, May 1 (sold for $40 per unit) 300e. Sale, July 3 (sold for $40 per unit) 600f. Operating expences (excluding income tax expense), $19,500Required: 1. Calculate the number and cost of goods available for sale. 2. Calculate the number of units in ending inventory. 3. Compute the cost of ending inventory and cost of goods sold under (a) FIFO, b) LFF, and (c) weighted average cost. 4. Prepare an income statement that shows under the FIFO method, LIFO method and weighted average method. 6. Which inventory costing method minimizes income taxes? Complete this question by entering your answers in the tabs below.