Answer:
B. 2g
Explanation:
So first you have to find the mole to mole ratio then convert it to grams if that makes sense. So the mole to mole ratio is 2 ammonia to 3 hydrogen gas. So then after you do that conversion you can solve for grams then. Sorry I am not that great at explaining.
how many moles of solute are present in 50.0 ml of 0.20 m kno3
Answer: Volume = 50.0 mL in liters : 50.0 / 1000 = 0.05 L
n = M x V
n = 0.20 x 0.05
n = 0.01 moles of solute
Explanation:
The number of moles of solute are present in 50.0 mL of 0.20 M of KNO₃ solution is 0.01 moles.
How do we calculate moles?Moles will be calculated by using the molarity formula because molarity is define as the no. of moles of solute present in per liter of the solution as:
M = n/V, where
M = molarity of KNO₃ = 0.2 M
V = volume of solution = 50mL = 0.05L
Moles will be calculated as:
n = (0.2)(0.05) = 0.01 moles
Hence required moles are 0.01 moles.
To know more about molarity, visit the below link:
https://brainly.com/question/26528084
A balloon filled with air has a volume of 6.50 L, a pressure of 0.900 atm, and a temperature of 25.0oC. If it is left out overnight, during which the temperature decreases to 15.0oC and the pressure rises to 1.15 atm, what will the volume of the balloon be?
Answer:
4.92 L
Explanation:
Rearrange ideal gas law and solve.
Change C to K.
- Hope that helps! Please let me know if you need further explanation.
Which is usually associated with a faster reaction rate?
A. diluting a solution of the reactants
B. adding modeling clay to the reactants
C. removing heat energy from the reactants
D. using a solid with a high surface area in the reactants
Answer:
D. using a solid with a high surface area in the reactants, is your correct answer.
Explanation:
Using a solid with a high surface area in the reactants is usually associated with a higher reaction rate.
Which equilibrium describes a reversible reaction a short time after starting the reaction with reactants only?
Answer:
Should be A
Explanation:
How are electrons similar and different to the planet Earth?
Answer:
The planets themselves are composed of several trillions or quadrillions or more atoms. As far as hard science is concerned, it would be really hard to picture them as electrons. Conclusion: It can be said with a great accuracy that our planets are NOT huge electrons.
Rutherford's experiments showed that the mass of atoms was mostly concentrated in a very small region, with charge equal to the atomic number- the nucleus. He absolutely did not show, nor is it true, that electrons orbit the nucleus as if they were planets. That was a guess people made in trying to figure out how to picture the atom.
(Hope this helps) Sky
What Le Chatelier’s factors cause an increase in the concentration of Hb(CO)4(aq) in the Hb(CO)4(aq) + 4O2(g)Hb(O2)4(aq) + 4CO(g)
Answer:
Explanation:
Hb(CO)4(aq) + 4O2(g) ⇄ Hb(O2)4(aq) + 4CO(g)
1 ) If we increase the concentration of CO(g) , the reaction above will proceed in reverse direction to decrease its concentration, according to Le Chatelier principle. Hence more of Hb(CO)4(aq) will be formed.
2 ) If we decrease the concentration of O₂ , then also , reaction will proceed in reverse direction . Hence concentration of Hb(CO)4(aq) will be increased .
A calcium atom differs from a calcium ion in that the atom has a greater
A)
number of electrons
B)
number of protons
C)
atomic number
D)
mass number
Answer:
A) number of electrons
Explanation:
A calcium atom has 20 electrons while a calcium ion has 18 electrons since it loses 2 electrons to form a stable octet structure. The formula of a calcium ion is Ca2+.
The number of protons does not change, neither do the number of neutrons. Atomic number is the proton number which is equals to the number of protons, hence B and C is wrong. Mass number is the number of protons and neutrons. Hence it doesnt change too and D is wrong.
Only the number of electrons change when an atom forms an ion.
Which sentence best describes part of the process for generating electricity in a nuclear power plant?
A.Atoms Join together to produce water molecules.
B.An atom releases electrons, producing an electric current.
C.Protons and neutrons Join together to create atoms.
D.Heat is released when atomic nuclel split.
Answer:it is D
Explanation: it is only one that makes sense
A typical cell phone uses wavelength of 0.36meters. How much energy does this wave have?
Answer:
55×10^-26 J
Explanation:
We can calculate the energy of the wave from
E= hc/λ
Where
h= Planks constant = 6.6×10^-34 Is
c= speed of light = 3×10^8 ms-1
λ= wavelength of the wave = 0.36 metres
Recall that cell phone use radio waves which belong to the electromagnetic spectrum hence it must possess the speed of light.
E= 6.6×10^-34 × 3×10^8/ 0.36
E= 55×10^-26 J
Hence the energy possessed by 0.36 meters wavelength radio waves is 55×10^-26 J
what is an example of a strong base?
HCl
NaCl
NaOH
HF
Answer:
The answer is NaOH
Explanation:
Strong bases are characterized by the fact that they dissociate completely in an aqueous solution. In this case, sodium hydroxide, NaOH, is classified as a strong base because it dissociates completely in an aqueous solution to form sodium cations, Na+, and hydroxide anions, OH−. Also, it is strong because it totally breaks in its ion. And the base which breaks totally in its atom called the strong base and which doesn't it that is a weak base.
Answer:
NaOH
Explanation:
Got it right in the test. Please mark as brainliest
what happens to the density of a box full of leaves if you crush up all the leaves and place them in another box
A the density increases
B the density stays the same
C the density decreases
D the density first decreases, then increases
Answer:
B the density stays the same
A weather forecast shows 35 m/h on the weather map. Which weather component does this number represent?
A.Humidity
B. Precipitation
C.Wind direction
D.Wind speed
Answer:
D. Wind Speed
Explanation:
When the question brings up 35 m/h, the m/h stands for Miles per Hour. What option can you measure the miles per hour. Here's a hint, it applies to cars as well when cops give your parents speeding tickets. Miles per Hour = Speed. So, you are measuring the wind speed.
Icp need help of available
Answer:
True statements: B and C
Explanation:
A is not true NaCl is product
D is not true the reaction occurs
how many Atoms of chlorine Cl are there in 3.45 mol Cl?
Answer:
2.078x10^24
Explanation:
No. of atoms of chlorine = 3.45 x 6.022x 10 ^23 x 1
= 2.078x10^24
( to find no. of atoms of, heres the formula i was taught No. of atoms = no. of moles x Avogadros constant x no. of atoms in the formula of compound)
How many joules are produced when 45 gram of copper is placed into water that releases them temperature from 12c to 71c (c)=0.75j/g*c
Answer:
Heat energy (Q) = 1.9925 KJ = 2 KJ (Approx)
Explanation:
Given:
Mass of copper (M) = 45 gram
Change in temperature (ΔT) = 71°C - 12°C = 59°C
Specific heat (c) =0.75 j /g*c
Find:
Heat energy (Q) = ?
Computation:
Heat energy (Q) = Mass(M) × Change in temperature (ΔT) × Specific heat (c)
Heat energy (Q) = 45 gram × 59°C × 0.75 j /g*c
Heat energy (Q) = 1991.25 J
Heat energy (Q) = 1.9925 KJ = 2 KJ (Approx)
Fiona is examining a material. She notices that the material has a dull appearance and feels very brittle.
Fiona is most likely examining a _______
(I'll give brainliest)
"Typical nonmetals have a dull, coloured or colourless appearance; are brittle when solid; are poor conductors of heat and electricity; and have acidic oxides." - Wikipedia
The only thing that makes one kind of light different from another is it’s ____?
A) frequency
B) color
C) wavelength
D) temperature
Which of the following presents a safety hazard while working in the science laboratory?
A knowing how to use equipment
B wearing safety goggles
C following directions
D working alone
Answer:
D working alone
Explanation:
Working alone is the only option that could potentially be a safety hazard; if you have no one watching your back, errors could occur, like dropping glass or burning your hand, and no one is around to help you.
Choices A, B, and C are not correct because those are all good safety standards.
An ideal gas, such as helium, is in a sealed container made of hard steel. If the container is heated, what would happen to the gas trapped inside the container?
Group of answer choices
The volume of the gas will decrease
The pressure of the gas will increase
The volume of the gas will increase
The pressure of the gas will decrease
Answer:
The correct answer is The pressure of the gas will increase
The volume of the gas will increase
Explanation:
Step 1: Data given
The gas in a container is heated, this means the temperature increases
Suppose we start with a temperature of 100 K and a pressure of 1 atm and a volume of 1L
Step 2:
V1/T1= V2/T2
⇒V1 = the initial volume = 1L
⇒T1 = the initial temperature = 100 K
⇒V2 = the new volume = TO BE DETERMINED
⇒T2 = the increased temperature = 200 K
1/100 = V2 / 200
V2 = 2 L
This means when the temperature increases, the volume will increase
P1/T1 = P2/T2
⇒P1 = the initial pressure = 1 atm
⇒T1 = the initial temperature = 100 K
⇒P2 = the new pressure = TO BE DETERMINED
⇒T2 = the increased temperature = 200 K
1/100 = P2 / 200
P2 = 2 atm
This means when the temperature increases, the pressure will increase
The correct answer is The pressure of the gas will increase
The volume of the gas will increase
What improvements have been made in modern farming? Select all that apply.
1. machines can do more work over less time
2. better seeds sprout and grow much more quickly
3. trains can transport food over long distances faster
4. trains can transport the machines to rural farms once built
5. insecticides used to keep insects off the crops
Answer:
all of them except number 2
Explanation:
Answer:
1,3,4,5 the other perosn is correct
Explanation: That what my quiz said
As the temperature of a fixed volume of a gas increases, the pressure will _____. A. vary inversely B. increase C. decrease D. not change
Answer:
increases
Explanation:
As the temperature of a fixed volume of a gas increases, the pressure will increase.
What is Gay Lussac's law?
According to this law at constant volume of gas, pressure is directly proportional to the temperature of the gas and it is represented as:
P ∝ T.
It means that if pressure increases then temperature is also increases or if pressure decreases then temperature will also decreases.
So, pressure of the gas increases.
To know more about Gay Lussac's law, visit the below link:
https://brainly.com/question/24002551
Why is soap mixed with water?
O A. The soap turns the water molecules into a nonpolar solvent.
B. It covalently bonds to the water so it can be washed away.
O C. Its polar end mixes with the water so it can be washed away.
D. The soap becomes chemically active when mixed with water.
Answer:
Explanation:
Soap breaks up the oil into smaller drops, which can mix with the water. It works because soap is made up of molecules with two very different ends. One end of soap molecules love water - they are hydrophilic. The other end of soap molecues hate water - they are hydrophobic.
Answer:
C. Its polar end mixes with the water so it can be washed away.
Explanation:
Just took test
Help me!
what is the biggest disadvantage of using nuclear power to produce electricity?
a. nuclear fission releases more air pollution than burning coal
b. nuclear fission produces less energy than burning coal or oil.
c. nuclear waste must be safely stored for many years
d. nuclear waste must be incinerated
The biggest disadvantage of using nuclear power to produce electricity is the nuclear waste must be safely stored for many years.
What is nuclear power?Nuclear power is the use of nuclear reactions to produce electricity. Nuclear power can be obtained from:
Nuclear fission Nuclear decay and Nuclear fusion reactionsNuclear reactions produces high amount of energy and many waste materials which are non degradable and will stay in the environment for the long time.
Hence, nuclear waste must be safely stored for many years.
To know more about nuclear power, visit the below link:
https://brainly.com/question/11963586
#SPJ2
What kind of energy transformations occur when you hit a coconut with a hammer
sound energy, kinetic energy,
i cant think of any more but hope this helps
Answer:
Mechanical to kinetic to sound to heat
Explanation:
Remember that all types of energy transformation end in heat
I AM GIVING BRAINLIEST PLEASEE HELPPPP I NEED HELPPPPPP PLEAEEEEEE
63.2 g of BaCl 2 are dissolved in enough water to make a 634 mL solution. What is the molarity?
Answer:
0.479 M or mol/L
Explanation:
So Molarity is moles/litres of solution...often written as M=mol/L
So here we are given grams of BaCl2 which we have to convert to moles. To convert to moles of BaCl2 we have to divide 63.2 g BaCl2 by molar mass of BaCl2 which is 208.23 g/mol so you get 63.2/208.23 = 0.3035 moles of BaCl2
Second step is converting the 634mL to litres by simply dividing by 1000 because we know 1 litre has 1000ml so 634/1000 = 0.634L
Now we just plug these guys in our molarity formula M=mol/L
M= 0.3035/0.634 = 0.479 M or mol/L
Answer:
Interestingly enough, I'm not getting
0.0341% w/v
either. Here's why.
Start by calculating the percent composition of chlorine,
Cl
, in calcium chloride, This will help you calculate the mass of chloride anions,
Cl
−
, present in your sample.
To do that, use the molar mass of calcium chloride, the molar mass of elemental chlorine, and the fact that
1
mole of calcium chloride contains
2
moles of chlorine atoms.
2
×
35.453
g mol
−
1
110.98
g mol
−
1
⋅
100
%
=
63.89% Cl
This means that for every
100 g
of calcium chloride, you get
63.89 g
of chlorine.
As you know, the mass of an ion is approximately equal to the mass of the neutral atom, so you can say that for every
100 g
of calcium chloride, you get
63.89 g
of chloride anions,
Cl
−
.
This implies that your sample contains
0.543
g CaCl
2
⋅
63.89 g Cl
−
100
g CaCl
2
=
0.3469 g Cl
−
Now, in order to find the mass by volume percent concentration of chloride anions in the resulting solution, you must determine the mass of chloride anions present in
100 mL
of this solution.
Since you know that
500 mL
of solution contain
0.3469 g
of chloride anions, you can say that
100 mL
of solution will contain
100
mL solution
⋅
0.3469 g Cl
−
500
mL solution
=
0.06938 g Cl
−
Therefore, you can say that the mass by volume percent concentration of chloride anions will be
% m/v = 0.069% Cl
−
−−−−−−−−−−−−−−−−−−−
I'll leave the answer rounded to two sig figs, but keep in mind that you have one significant figure for the volume of the solution.
.
Explanation:
Why is wind named from where the wind is blowing from?
Winds are always named from the direction it blows from
Uneven heating of Earth's surface,in turn,causes differences in air pressure at various locations. Heated air rises,creating an area of low pressure beneath. Cooler air descends, creating an area of high pressure
Why were scientists surprised to find coal in the arctic?
Answer:
coal is made from compressed plant matter and how exactly did plants grow on the surface of an ocean. (as there is no land mass beneath the arctic.)
Explanation:
it would be like finding a fly in an ice cube to simplify it.
They were surprised to find coal in arctic because ordinarily coal was supposed to be found in warm or hot environments and not cold region like the arctic.
The arctic is located at the far northern part of the world which is characterized by its extreme cold weather.
A limited vegetation of plants such as grasses, mosses and lichens are found in this region irrespective of the extreme cold weather through out the year.
Coal is a type of fuel gotten from fossils and deposits of plant vegetation.
Scientist has discovered that continents do move over time through a process called continental drift. This is the reason why limited vegetaion is found in the arctic leading to the formation of coal.
Learn more here:
https://brainly.com/question/22647554
The amplitude of a wave is the vertical distance from the midpoint to either the crest or the
trough of the wave
True
False
EMERGENCY OR I WILL FAIL PLS HELP I WILL MARK BRAINLIEST!!!!
Answer:
1. sublimation
2.melting
3.melting
4.sublimation
Explanation:
melting is a process when solid changes to liquid
Sublimation is the transition of a substance directly from the solid to the gas state, without passing through the liquid state.
aight imma let you guys i
Answer:
b
Explanation:
it is right
