In the following reaction 6.13g of water (H,O) is produced the theoretical
yield of water (H,O) is 8.17g, what is the percent yield of water?*
C3H8+ 5 O2 → 3 CO2 + 4 H2O
85.0%
72.0%
75.0%
0 67.0%

Answer:

yes

Explanation:gergrgregbfbwerbebw

Answer:

An amplifying device that indicates the presence of ionizing particles  

GEIGER COUNTERS

A device that permits determination of alpha and beta radiation emitted from a substance  

BOTH

Film sensitive to radiation that is removed and developed to measure exposure  

NEITHER

A device used for monitoring individual cumulative exposure to ionizing radiation  

NEITHER

Explanation:

1. Geiger counters and scintillation counters can be described by statements 1 and 2.

2. Statement 3 refers to film-based radiation detectors, not Geiger counters or scintillation counters.

3. Statement 4 refers to dosimeters, not Geiger counters or scintillation counters.

1. An amplifying device that indicates the presence of ionizing particles: This statement describes both Geiger counters and scintillation counters. Both types of counters use amplifying devices to detect and indicate the presence of ionizing particles.

2. A device that permits determination of alpha and beta radiation emitted from a substance: This statement describes both Geiger counters and scintillation counters. Both types of counters are capable of detecting alpha and beta radiation.

3. Film sensitive to radiation that is removed and developed to measure exposure: This statement describes neither Geiger counters nor scintillation counters. Instead, it refers to film-based radiation detectors, such as photographic film or thermoluminescent dosimeters (TLDs), which are used to measure radiation exposure.

4. A device used for monitoring individual cumulative exposure to ionizing radiation: This statement describes neither Geiger counters nor scintillation counters.

Know more about ionizing particles:

https://brainly.com/question/12206417

#SPJ2

Answer:

Find the element,

Explanation:

Finding the element will tell you how many protons there are. For example, if you are given an atom of oxygen, you can figure out the number of protons by looking it up on a periodic table, which gives you 8.

If an atom is neutral, find the number of electrons. This number will also be the number of protons.

Answer:

A

help u and it's A

Explanation:

Answer:

Explanation:

Radiation from the sun heats the ground, then the ground heats the air by process of conduction. When that happens air temp. and density start to change causing air convection currents. Hope I help.

Answer:

- [tex][H^+]=1x10^{-12}[/tex]

- Basic.

Explanation:

Hello,

In this case, given the concentration of hydroxyl ions, one could compute the pOH as shown below:

[tex]pOH=-log([OH^-])=pOH=-log(1x10^{-2})=2[/tex]

Then, since the pOH and the pH are related by:

[tex]pH+pOH=14[/tex]

One computes the pH:

[tex]pH=14-pOH=14-2=12[/tex]

Now, we compute the concentration of hydronium by:

[tex][H^+]=10^{-pH}=10^{-12}[/tex]

[tex][H^+]=1x10^{-12}[/tex]

Finally, since the pH is greater than 7 (neutral point) we conclude that the solution is basic.

Best regards.

Answer:

A. Hydrogen ion concentration, [H+] is 1x10^–12 mol/L

B. Since the pH is 12, the solution is basic.

Explanation:

Data obtained from the question. This includes the following:

Concentration of Hydroxide ion, [OH-] = 1x10^–2 mol/L

Concentration of Hydrogen ion, [H+] =.?

pH =..?

A. Determination of the hydrogen ion concentration, [H+] .

The hydrogen ion concentration, [H+] can be obtained as follow:

[H+] x [OH-] = 1x10^–14

[OH-] = 1x10^–2

[H+] x 1x10^–2 = 1x10^–14

Divide both side by 1x10^–2

[H+] = 1x10^–14 / 1x10^–2

[H+] = 1x10^–12 mol/L

B. Determination of the pH of the solution.

The pH of the solution can be obtained as follow:

pH = –Log [H+]

[H+] = 1x10^–12 mol/L

pH = –Log 1x10^–12

pH = 12.

Then pH of a solution ranges between 0 and 14.

A pH reading between 0 and 6 is termed an acidic solution, a pH reading of 7 is termed a neutral solution and a pH reading between 8 and 14 indicates an alkaline or a basic solution.

The higher the pH value, the more alkaline or basic the solution becomes.

Since the pH is 12, the solution is basic.

Answer: 1- gas 2- solid

Explanation:

Answer:

B) 88.6%

Explanation:

Percent yield equals actual yield divided by theoretical yield

actual yield is 31.0g

theoretical yield is 35g

percent yield was 88.57 which rounds up to 88.6%

Answer:

Molecules and small particles in the atmosphere change the direction of light rays, causing them to scatter. Scattering affects the color of light coming from the sky.

Explanation:

Answer:

More energy

Explanation:

Wave amplitude is determined by the energy of the disturbance that causes the wave. A wave caused by a disturbance with more energy has greater amplitude.

Answer:

energy of the disturbance

Explanation:

........ btw bts paved the way I saw you was army and thought I would say that

Answer:d. Acid+base

Explanation:

Because, The general word equation for salt formation by neutralization is acid + base = salt + water.

Answer:

D ACID + BASE

Explanation:

Answer:

- From octane: [tex]m_{CO_2}=1.54x10^5gCO_2[/tex]

- From ethanol: [tex]m_{CO_2}=9.57x10^4gCO_2[/tex]

Explanation:

Hello,

At first, for the combustion of octane, the following chemical reaction is carried out:

[tex]C_8H_{18}+\frac{25}{2} O_2\rightarrow 8CO_2+9H_2O[/tex]

Thus, the produced mass of carbon dioxide is:

[tex]m_{CO_2}=5.00x10^4gC_8H_{18}*\frac{1molC_8H_{18}}{114gC_8H_{18}}*\frac{8molCO_2}{1molC_8H_{18}}*\frac{44gCO_2}{1molCO_2} \\\\m_{CO_2}=1.54x10^5gCO_2[/tex]

Now, for ethanol:

[tex]C_2H_6O+3O_2\rightarrow 2CO_2+3H_2O[/tex]

[tex]m_{CO_2}=5.00x10^4gC_2H_6O*\frac{1molC_2H_6O}{46gC_2H_6O}*\frac{2molCO_2}{1molC_2H_6O}*\frac{44gCO_2}{1molCO_2} \\\\m_{CO_2}=9.57x10^4gCO_2[/tex]

Best regards.

Answer:

P IBr: 15.454atm

I₂: 0.923 atm

P Br₂: 0.923atm

Explanation:

Basados en la reacción:

I₂(g) + Br₂(g) ⇄ 2 IBr(g)

La constante de equilibrio, Keq, es definida como:

[tex]Keq = \frac{P_{IBr}^2}{P_{I_2}P_{Br_2}}[/tex]

Se cumple la relación de Keq = 280 cuando las presiones están en equilibrio

Usando PV = nRT, la presión inicial de IBr es:

P = nRT / V; 0.500mol*0.082atmL/molK*423.15K / 1.00L = 17.3 atm

Siendo las presiones en equilibrio:

P IBr: 17.3 - 2X

P I₂: X

P Br₂: X

Donde X representa el avance de reacción.

Remplazando en Keq:

280 = (17.3 - 2X)² / X²

280X² = 4X² - 69.2X + 299.29

0 = -276X² - 69.2X + 299.29

Resolviendo para X:

X = -1.174 → Solución falsa. No existen presiones negativas

X = 0.923 → Solución real

Así, las presiones parciales en equilibrio de cada compuesto son:

P IBr: 17.3 - 2X = 15.454atm

P I₂: X = 0.923atm

P Br₂: X = 0.923atm

Answer:

[tex]p_{I_2}=0.926atm\\p_{Br_2}=0.926atm\\p_{IBr}=15.5atm[/tex]

Explanation:

Hello,

In this case, given the initial load of 0.500 mol of IBr in the 1.00-L, we compute its initial concentration:

[tex][IBr]_0=\frac{0.500mol}{1.00L}=0.500M[/tex]

Hence, by knowing the original reaction, we should invert it as IBr will produce iodine and bromine considering the initial load:

[tex]2IBr(g)\rightleftharpoons I_2(g) + Br_2(g)[/tex]

Therefore, the equilibrium constant should be inverted:

[tex]K'=\frac{1}{Keq}=\frac{1}{280}=3.57x10^{-3}[/tex]

So we write the law of mass action:

[tex]K'=\frac{[I_2][Br_2]}{[IBr]^2}[/tex]

That in terms of the change [tex]x[/tex] due to the reaction extent turns out:[tex]3.57x10^{-3}=\frac{(x)(x)}{(0.500-2x)^2}[/tex]

In such a way, solving by using solver or quadratic equation we obtain:

[tex]x_1=-0.0339M\\x_2=0.0267M[/tex]

Clearly, the solution is 0.0267M, thus, the equilibrium concentrations are:

[tex][I_2]=x=0.0267M[/tex]

[tex][Br_2]=x=0.0267M[/tex]

[tex][IBr]=0.5M-2x=0.5M-2*0.0267M=0.447M[/tex]

Thus, with the given temperature (150+273.15=423.15K), we compute the partial pressures by using the ideal gas equation:

[tex]p_{I_2}=[I_2]RT=0.0267\frac{mol}{L} *0.082\frac{atm*L}{mol*K}*423.15K\\\\p_{I_2}=0.926atm\\\\p_{Br_2}=[Br_2]RT=0.0267\frac{mol}{L} *0.082\frac{atm*L}{mol*K}*423.15K\\\\p_{Br_2}=0.926atm\\\\p_{IBr}=[IBr]RT=0.447\frac{mol}{L} *0.082\frac{atm*L}{mol*K}*423.15K\\\\p_{IBr}=15.5atm[/tex]

Best regards.

Answer:

What that means is that when pressure and number of moles are kept constant, increasing the temperature will result in an increase in volume. Likewise, a decrease in temperature will result in a decrease in volume. In your case, the volume of the gas decreased by a factor of about 3, from "140.0 mL" to "50.0 mL".

Answer:A heating curve graphically represents the phase transitions that a substance undergoes as heat is added to it. The plateaus on the curve mark the phase changes. The temperature remains constant during these phase transitions.

Answer:

hypothalamus

Explanation:

Answer:

It a comet

Explanation:

that why they are also called dirty snowballs

Answer:

A comment

Explanation:

Because I took the test and that 100 and because comets are icy and sometimes lead tale of water droplets behind them

Answer:

The moon's period of rotation and revolution are equal

Answer:

[tex]x = 6.634\times 10^{23}\,atoms[/tex]

Explanation:

The quantity of atoms within the mass of copper is determined by multiplying the quantity of moles by the Avogadro's Number:

[tex]x = \left(\frac{70\,g}{63.546\,\frac{g}{mol}} \right)\cdot \left(6.022\times 10^{23}\,\frac{atoms}{mol} \right)[/tex]

[tex]x = 6.634\times 10^{23}\,atoms[/tex]

Answer:

6.64x10^23 atoms.

Explanation:

From Avogadro's hypothesis, 1 mole of any substance contains 6.02x10^23 atoms. This implies that 1 mole of Cu also contains 6.02x10^23 atoms.

1 mole of Cu = 63.5g

If 63.5g of Cu contains 6.02x10^23 atoms,

Then 70g of Cu will contain = (70x6.02x10^23) /63.5 = 6.64x10^23 atoms.

Therefore, there are 6.64x10^23 atoms in 70g oh Cu

Answer:

?

Explanation:

What are the statements? You've given the passage but not the statements

Explanation:

1) %70 earth is water and %30 is land.

2)" The single cells in the brain communicatethrough electrical and chemical signals.

3) b'coz earth revolve around the sun in365 days and rotates on its axis in 24 hours. It takes 365 days , because it takes that much time to complete one revolution and it takes 24 hours,because it takes time to complete one rotation as mercury takes 81 earthdays to complete one revolution.

4) Human originated from Adam And Eve.

gas with the smallest amount of molecular weight will effuse the quickest

Answer:

Radioactive isotopes ranging from 11O to 26O have also been characterized, all short-lived. The longest-lived radioisotope is 15O with a half-life of 122.24 seconds, while the shortest-lived isotope is 12O with a half-life of 580(30)×10−24 seconds (the half-life of the unbound 11O is still unknown).

answer:it is false

explanation: as it is true or false I think you don't need explanation

Answer:

28.69 grams

Explanation:

To find the mass, we first need to find the moles. Once we have the moles, it is easy to use the molar mass of H2SO4 to find its mass.

To find the moles, remember that molarity (M) is equal to the moles divided by the volume (L). The volume HAS TO be converted to liters!

M = moles / V

5.85 M = moles / 0.05 L

moles = 0.2925

Now we know that we have 0.2925 moles of sulfuric acid. The molar mass of sulfuric acid is 98.08 g/mol.

0.2925 moles * (98.08 g / mol) = 28.69 grams

Make sense? If you have any questions, don't hesitate to ask!

Answer:

1.1 mol/liter

Explanation:

You would use the M1V1 = M2V2 equation to solve this.

We know M1 is 3.0 M, V1 is 25 milliliters, and V2 is 68 milliliters. We need to find M2.

To find M2, first plug in what you know.

(3.0 M)(25 mL) = M2(68 mL)

Then, divide everything by 68 mL to get M2 by itself

Your answer should be a quite large decimal but I rounded it to 1.1 mol/liter.

Answer:

The concentration of sodium chloride is 1.1 moles/liter.

Explanation:

Answer:

Hydrogen bonding.

Explanation:

Ammonium lauryl sulfate is also known as ammonium dodecyl sulfate there are two parts in Ammonium lauryl sulfate one is nonpolar hydrocarbon and other part polar sulfate group.

Due to polarity of sulfate group its form hydrogen bond very easily.

It is mainly used as foaming agent the main reason of its use is very much soluble in water and making hydrogen bond with water.

Answer:

[tex]4.6\,\,moL\,\,L^{-1}[/tex]

Explanation:

Molarity refers to a measure of concentration.

Molarity = moles of solute/Litres of solution

Molarity refers to number of moles of solute present in this solution.

In order to find a solution's molarity, use value for the number of moles of solute  and the total volume of the solution expressed in liters

As molarity of 2.3 mol of Kl is dissolved in 0.5 L of water,

Molarity = [tex]\frac{2.3}{0.5} =4.6\,\,moL\,\,L^{-1}[/tex]

Answer:

An organ

Explanation:

An organ is one or more tissues that work together to form a specific function.

- Hope that helps! Please let me know if you need further explanation.

Answer:

Ideal Gas Law

PV = nRT

Explanation:

Pressure is proportional to temperature;

The heat of the fire would cause increased pressure inside the closed aerosol vessel, eventually resulting in explosion of the vessel, once the temperature rises enough.