Answer:
WAS THE VOOK NAME =THE BOY WHO HARNESSED THE WIND?
1.How did environmental factors affect food production? They could not grow any crops
2. What does William’s windmill allow him to have that he didn’t before? How does life change for him and his family? His windmill allowed him and his family to be able to regrow crops and have unlimited water. Life changes because don’t have to worry about drought issues.
3.Why are trees important to farmers in William’s village? The trees are important because they stop floods. Now whenever it rains the trees can soak up the water.4.Could you imagine living without electricity? What would your life be like? Describe William's life and compare it to American teenagers and even your own. I could not imagine living without electricity. If I lived without electricity, I think my life would be kind of hard at first but after a while I would have to get used to it. William had to depend on the sun for all his light a normal teenager can cut the lights on and off in
Viết các đồng phân cấu tạo mạch hở của C4H6O2 cùng nhóm chức axit
Answer:
+ axit
CH2=CH-CH2-COOH,
CH3-CH=CH-COOH (tính cả đồng phân hình học)
CH2=C(CH3)-COOH.
+ este
HCOOCH=CH-CH3 (tính cả đồng phân hình học)
HCOO-CH2-CH=CH2,
HCOOC(CH3)=CH2.
CH3COOCH=CH2
CH2=CH-COOCH3
A sample of oxygen occupies 1.00 L. If the temperature remains constant, and the pressure on the oxygen is decreased to one third the original pressure, what is the new volume
Answer:
3.00 L
Explanation:
P₁V₁ = P₂V₂
V₁ = 1.00 L
P₁ = (x) atm
P₂ = [tex]\frac{1}{3}[/tex] · (P₁) = [tex]\frac{x}{3}[/tex]
V₂ = unknown
(x atm)(1.00 L) = ( [tex]\frac{x}{3}[/tex] atm)(V₂)
divide both sides by ( [tex]\frac{x}{3}[/tex] atm)
( 1.00x )( [tex]\frac{3}{x}[/tex] ) = V₂
x cancels out
(1.00)(3) = V₂
V₂ = 3.00 L
Write a net ionic equation for the overall reaction that occurs when aqueous solutions of carbonic acid and sodium hydroxide are combined. Assume excess base.
Answer:
[tex]H_2CO_3(aq)+2OH^-(aq)\rightarrow (CO_3)^{2-}(aq)+2H_2O(l)[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to set up this net ionic equation, by firstly setting up the complete molecular equation as follows:
[tex]H_2CO_3(aq)+2NaOH(aq)\rightarrow Na_2CO_3(aq)+2H_2O(l)[/tex]
Thus, since carbonic acid is weak it merely ionizes whereas sodium hydroxides ionizes for the 100 % as it is strong; thus, we can write the complete ionic equation:
[tex]H_2CO_3(aq)+2Na^+(aq)+2OH^-(aq)\rightarrow 2Na^+(aq)+(CO_3)^{2-}(aq)+2H_2O(l)[/tex]
Whereas sodium ions act as the spectator ones to be cancelled out for us to obtain:
[tex]H_2CO_3(aq)+2OH^-(aq)\rightarrow (CO_3)^{2-}(aq)+2H_2O(l)[/tex]
Regards!
What enzyme below is an exoenzyme?
A. Casease
B. Citrase
C. Catalase
D. Oxidase
How much heat capacity, in joules and in calories, must be added to a 75.0-g iron block with a specific heat of 0.499J/g °C to increase its temperature from 25 °C to its melting temperature of 1535 °C?
Answer:
56511.75 J
13506.3 Calories
Explanation:
Applying,
Q = cm(t₂-t₁).................. Equation 1
Where Q = amount of heat, m = mass of the iron, c = specific heat capacity of the iron, t₁ = initial temperature, t₂ = final temperature.
From the question,
Given: m = 75 g, c = 0.499 J/g.°C, t₂ = 1535°C, t₁ = 25°C
Substitute these values into equation 1
Q = 75(0.499)(1535-25)
Q = 75(0.499)(1510)
Q = 56511.75 J
Q in Calories is
Q = (56511.75×0.239)
Q = 13506.3 Calories
What is "X" in the following reaction?
For each of the following compounds, indicate the pH at which 50% of the compound will be in a form that possesses a charge and at which pH more than 99% of the compound will be in a form that possesses a charge.
ClCH2COOH (pKa = 2.86)
CH3CH2NH+3 (pKa = 10.7)
Express your answer using two decimal places
a. Determine a pH at which 50% of ClCH2COOH will be in a form that possesses a charge.
b. Determine a pH at which pH more than 99% of ClCH2COOH will be in a form that possesses a charge.
c. Determine a pH at which 50% of CH3CH2NH+3 will be in a form that possesses a charge.
d. Determine a pH at which pH more than 99% of CH3CH2NH+3 will be in a form that possesses a charge.
Answer:
a. 2..86 b. 4.86 c. 10.7 d. 8.7
Explanation:
a. Determine a pH at which 50% of ClCH2COOH will be in a form that possesses a charge.
Using the Henderson-Hasselbalch equation,
pH = pKa + log[A⁻]/[HA]
where [A⁻] = concentration of conjugate base (or charged form) and [HA] = concentration of acid.
At 50% concentration, [A⁻] = [HA] ⇒ [A⁻]/[HA] = 1
So, pH = pKa + log[A⁻]/[HA]
pH = pKa + log1
pH = pKa = 2.86
b. Determine a pH at which pH more than 99% of ClCH2COOH will be in a form that possesses a charge.
Let x be the concentration of the acid. Since 99% of it should possess a charge, the basic concentration is 0.99x while the acidic concentration is remaining 1 % (1 - 0.99)x = 0.01x
Using the Henderson-Hasselbalch equation,
pH = pKa + log[A⁻]/[HA] where [A⁻] = concentration of conjugate base (or charged form) = 0.99x and [HA] = concentration of acid = 0.01x.
pH = pKa + log0.99x/0.01x
pH = pKa + log0.99/0.01
pH = 2.86 + log99
pH = 2.86 + 1.996
pH = 4.856
pH ≅ 4.86
c. Determine a pH at which 50% of CH3CH2NH+3 will be in a form that possesses a charge.
Using the Henderson-Hasselbalch equation,
pH = pKa + log[A⁻]/[HA]
where [A⁻] = concentration of conjugate base and [HA] = concentration of acid.
At 50% concentration, [A⁻] = [HA] ⇒ [A⁻]/[HA] = 1
So, pH = pKa + log[A⁻]/[HA]
pH = pKa + log1
pH = pKa = 10.7
d. Determine a pH at which pH more than 99% of CH3CH2NH+3 will be in a form that possesses a charge.
Let x be the concentration of the acid. Since 99% of it should possess a charge, the basic concentration is 0.01x while the acidic concentration is remaining 99 % (1 - 0.01)x = 0.99x (which possesses the charge).
Using the Henderson-Hasselbalch equation,
pH = pKa + log[A⁻]/[HA] where [A⁻] = concentration of conjugate base = 0.01x and [HA] = concentration of acid = 0.99x.
pH = pKa + log0.01x/0.99x
pH = pKa + log1/99
pH = 10.7 - log99
pH = 10.7 - 1.996
pH = 8.704
pH ≅ 8.7
differences between expansion of solid and liquid
A system receives 425 J of heat from and delivers 425 J of work to its surroundings. What is the change in internal energy of the system (in J)?
Answer:
0 J
Explanation:
Applying,
ΔE = q+w................ Equation 1
Where ΔE = change in internal energy of the system, q = Heat of the system, w = work of the system.
Note: q is positive, while w is negative
From the question,
Given: q = 425 J, w = -425 J
Substitute these values into equation 1
ΔE = 425-425
ΔE = 0 J
Hence the change in internal energy of the system is 0 J
A one electron species, X m, where m is the charge of the one electron species and X is the element symbol, loses its one electron from its ground state when it absorbs 3.49 x 10-17 J of energy. Using the prior information, the charge of the one electron species is:_____________
a. +8
b. +2
c. +3
d. +1
e. +4
Answer:
Option C
Explanation:
From the question we are told that:
Difference in energy [tex]\delta E =3.49 * 10^{-17} J[/tex]
The Ground state Difference in energy at n=1
[tex]\delta E_g = 2.18 * 10^{-18} × Z^2[/tex]
Generally the equation for Difference in energy is mathematically given by
[tex]\delta E=\delta E_g[/tex]
Therefore
[tex]3.49 * 10^{-17} = 2.18 * 10^{-18} * Z^2[/tex]
[tex]Z^2=16[/tex]
[tex]Z=4[/tex]
Therefore
Charge on element Z Q_Z
[tex]Q_Z= Atomic\ no\. of\ element - No.\ of\ electrons\ of\ element[/tex]
[tex]Q_Z =4-1[/tex]
[tex]Q_Z=+3[/tex]
Option C
Suppose you had a 2.4 g cracker burn down to 1.3 g, which raised the temperature of 50.1 g of water by 12.0 degrees Celsius. How many kilocalories of heat energy was released by the cracker (or absorbed by the water) per gram of cracker
Answer:
We know that the specific heat of water is:
c = 1cal/g*°C
This means, that we need 1 cal to increase the temperature of 1 gram of water by 1°C
Here, we increased the temperature of 50.1g of water by 12°C
Then the number of calories needed to do this is given by:
x = (mass of water in grams)*(how much increased the temp in °C)*1cal/g*°C
x = (50.1g*12°C)*1cal/g*°C = 601.2 cal
But we want this in Kcal, remember that:
1Kcal = 1000cal
Then:
601.2 cal = (601.2/1000) Kcal = 0.6012 Kcal
Now, for the cracker part, the energy was released by the amount of cracker that was burned.
The original mass was 2.4g
the final mass ios 1.3g
the difference is:
2.4g - 1.3g = 1.1g
This means that 1.1g was the burned mass.
The number of kilocalories of heat per gram released by the cracker is just:
n = (0.6012 Kcal)/(1.1 g) = 0.547 Kcal/g
0.547 kilocalories per gram.
1. Most of the chemicals included in your General Chemistry Lab kit can be discarded down a drain. Describe a situation in which you would need to neutralize a chemical before discarding down a drain.
Answer: Chemicals like acids and bases are harmful and must be neutralized before draining.
Explanation:
A strong acid or strong base is required to be diluted or neutralized before it is discarded in the drain as if is discarded without diluting and neutralization it can spill and splash from sink or drain and can harm people in chemistry lab, moreover the fumes of the discarded chemical on spilling can cause respiratory tract burning and can even cause fire hazard so it must be converted into less harmful form and then must be drained.
a chemist combines 4.9 g of nitrogen gas with 9.4 grams of nitrogen gas to form 11.4 g of ammonia 2.9 g of nitrogen is remaining
Write a balanced half-reaction for the oxidation of liquid water to aqueous hydrogen peroxide in basic aqueous solution. Be sure to add physical state symbols where appropriate.
Answer:
O2(g) + 2H2O(l) --------> 2H2O2(aq) + 2e
Explanation:
An oxidation reaction reaction refers to a reaction in which electrons are lost. In this case, we are about to see the full balanced half-reaction for the oxidation of liquid water to aqueous hydrogen peroxide in basic aqueous solution.
The full equation is;
O2(g) + 2H2O(l) --------> 2H2O2(aq) + 2e
So, two electrons were lost in the process.
How many grams of NaF should be added to 500 mL of a 0.100 M solution of HF to make a buffer with a pH of 3.2
Answer:
2.25g of NaF are needed to prepare the buffer of pH = 3.2
Explanation:
The mixture of a weak acid (HF) with its conjugate base (NaF), produce a buffer. To find the pH of a buffer we must use H-H equation:
pH = pKa + log [A-] / [HA]
Where pH is the pH of the buffer that you want = 3.2, pKa is the pKa of HF = 3.17, and [] could be taken as the moles of A-, the conjugate base (NaF) and the weak acid, HA, (HF).
The moles of HF are:
500mL = 0.500L * (0.100mol/L) = 0.0500 moles HF
Replacing:
3.2 = 3.17 + log [A-] / [0.0500moles]
0.03 = log [A-] / [0.0500moles]
1.017152 = [A-] / [0.0500moles]
[A-] = 0.0500mol * 1.017152
[A-] = 0.0536 moles NaF
The mass could be obtained using the molar mass of NaF (41.99g/mol):
0.0536 moles NaF * (41.99g/mol) =
2.25g of NaF are needed to prepare the buffer of pH = 3.210. Hydrogen peroxide (H2O2: M = 34 g mol-1) is a powerful oxidising agent that is used in concentrated solution in rocket fuel systems and in dilute solution as in hair bleach. An aqueous solution of H2O2 is 30 % by mass and has a density of 1.11 g cm-3. Express the concentration of the solution in terms of: (i) Molality
Answer:
The molality of solution=12.605 m
Explanation:
We are given that
Molar mass of Hydrogen peroxide, M=34 g/mol
Density of solution, [tex]\rho=1.11gcm^{-3}[/tex]
30% Means mass of solute (Hydrogen peroxide)=30 g
Mass of solvent =100-30=70 g
Total mass of solution, m=100 g
Number of moles of solute=[tex]\frac{given\;mass}{molar\;mass}[/tex]
Using the formula
Number of moles of hydrogen peroxide=[tex]\frac{30}{34}[/tex]
Now, molality of solution
[tex]m=\frac{number\;of\;moles\;of\;solute}{mass\;of\;solvent}\times 1000[/tex]
[tex]m=\frac{30}{70\times 34}\times 1000[/tex]
[tex]m=12.605 m[/tex]
Hence, the molality of solution=12.605 m
any two functions of crystals
Answer:
1. Participating in calcium homeostatis storage of calcium.
2. High capacity calcium (Ca) regulation and protection against herbivory
[tex]\large \boxed{\sf 2 \: functions \: of \: crystals \: are :- } [/tex]
_________________
⟹
[tex] \sf \: \underline{ Calcium \: oxalate \: (CaOx) \: crystals} \: are \: distributed \: \\\sf among \: all \: taxonomic \: levels \\ \sf\: of \: photosynthetic \: organisms \: from \\ \sf \: small \: algae \: to \: angiosperms \: and \: giant \: gymnosperms .[/tex]
__________________
⟹
[tex]\sf Bone \: is \: mostly \: made \: of \: \underline{mineral \: crystals} \: \\ \sf and \: the \: protein \: collagen. \: The \: mineral \: crystals \: bone \\ \sf\: provide \: strength \: and \: rigidity \: for \: the \: matrix \: upon \: \\ \sf \: and \: within \: which \: they \: are \: deposited.[/tex]
A uniform plastic block floats in water with 50.0 % of its volume above the surface of the water. The block is placed in a second liquid and floats with 23.0 % of its volume above the surface of the liquid.
What is the density of the second liquid?
Express your answer with the appropriate units.
Answer:
density of second liquid = 650 kg/m³
Explanation:
Given that:
The volume of the plastic block submerged inside the water = 0.5 V
The force on the plastic block = [tex]\rho_1V_1g[/tex]
[tex]= 0.5p_1 V_g[/tex]
when the block is floating, the weight supporting the force (buoyancy force) is:
W [tex]= 0.5p_1 V_g[/tex]
[tex]\rho Vg = 0.5p_1 V_g[/tex]
[tex]\rho = 0.5 \rho _1[/tex]
where;
water density [tex]\rho _1[/tex] = 1000
[tex]\rho = 0.5 (1000)[/tex]
[tex]\rho = 500 kg/m^3[/tex]
In the second liquid, the volume of plastic block in the water = (100-23)%
= 77% = 0.7 V
The force on the plastic block is:
[tex]= 0.77p_2 V_g[/tex]
when the block is floating, the weight supporting the force (buoyancy force) is:
[tex]W = 0.77p_2 V_g[/tex]
[tex]\rho Vg = 0.77 \rho_2 V_g \\ \\ \rho = 0.77 \rho_2 \\ \\ 500 = 0.77 \rho_2 \\ \\ \rho_2 = 500/0.77[/tex]
[tex]\mathbf{ \rho_2 \simeq 650 \ kg/m^3}[/tex]
The compound IF5 contains Question 16 options: polar covalent bonds with partial negative charges on the F atoms. ionic bonds. polar covalent bonds with partial negative charges on the I atoms. nonpolar covalent bonds.
Answer:
See explanation
Explanation:
The molecule IF5 possesses five I-F polar bonds. However, the presence of polar bonds does not automatically imply that the molecule will be polar.
The geometry of the molecule is very important in determining the polarity of a compound. Since IF5 has a lone pair of electrons, the molecule is bent and as such there is a permanent dipole moment created in the molecule thereby making IF5 polar in nature.
If 52.5 mL of lead(II) nitrate solution reacts completely with excess sodium iodide solution to yield 0.248 g of precipitate, what is the molarity of lead(II) ion in the original solution
Explanation:
The volume of given lead nitrate solution is:
52.5 mL.
The amount of lead iodide formed is ---0.248 g.
To get the molarity of lead (II) ion follow the below-shown procedure:
The number of moles of lead iodide formed is:
[tex]number of moles of lead iodide(n)=mass of lead iodide/its molecular mass\\n=0.248 g/461.01g/mol\\n=0.000537mol[/tex]
0.000537 mole of lead iodide contains --- 0.000537 moles of lead (II) ion.
Thus, the number of moles are there, volume is there, and to get the molarity of lead (II) ion use the formula:
[tex]Molarity=\frac{number of moles}{volume in L.} \\M=0.000537 mol / 0.0525 L.\\M=0.0102mol/L[/tex]
Molarity of lead iodide is --- 0.0102 M.
Use the Ka values for weak acids to identify the best components for preparing buffer solutions with the given pH values.
Name Formula Ka
Phosphoric acid H3PO4 7.5 x 10^-3
Acetic acid CH3COOH 1.8 x 10^-5
Formic acid HCOOH 1.8 x 10^-4
pH 1.9 =_________
pH 5.0 = ________
pH 3.9= ________
Answer:
pH= 1.9 then [tex]H_{3} PO_{4}[/tex]
pH = 5.0 , [tex]CH_{3} COOH[/tex]
pH = 3.9 , HCOOH
As we know range left [tex]pH= pKa+/- 1[/tex]
what is speed lathe machine.
Answer:
A speed lathe is a type of lathe that is designed to operate much faster than its common counterpart.
You should set out support, like a cork ring or clamp, before removing the glassware from a glassware kit to place the glassware in and to stop it from _________. Thoroughly check that the glasswar is________ and that it does not have any _______before using it.
Answer:
(A) Slipping and breaking
(B) Clean and dry
(C) Cracks
Explanation:
This describes the process of unpacking a glassware for use.
You should set out support like a cork ring or clamp (these are simple machines that'll hold the glassware in place) before removing the glassware from a glassware kit; to place the glassware in and to stop it from slipping and breaking.
Thoroughly check that the glassware is clean and dry and that it does not have any cracks, before using it.
Inter-molecular forces determine the _______________ properties while intra-molecular forces determine the ________ properties of compounds.
Answer:
Physical
Chemical
Explanation:
Intermolecular forces are the forces that hold the molecules of a substance together in a particular state of matter. They decide the physical properties of a substance.
The intra molecular forces are the bond forces that hold atoms together in molecules. The nature of this bonding determines the chemical properties of substances.
If a 0.320 mM solution of MnO41- has an absorbance of 0.480 at 525 nm in a 1.000 cm cell. What is the concentration of a MnO41- solution that has absorbance of 0.490 in the same cell at that wavelength?
Answer:
Hence the concentration of a MnO41- solution that has absorbance of 0.490 in the same cell at that wavelength is 0.3266.
Explanation:
Now A = el, el=const
Then,
[tex]A2 / A1 = C2/ C1\\\\0.49/ 0.48 = C2 / 0.32\\\\C2 = 0.3266[/tex]
Sometimes in lab we collect the gas formed by a chemical reaction over water . This makes it easy to isolate and measure the amount of gas produced.
Suppose the CO, gas evolved by a certain chemical reaction taking place at 50.0°C is collected over water, using an apparatus something like that in the sketch, and the final volume of gas in the collection tube is measured to be 132. mL. Calculate the mass of CO, that is in the collection tube. Round your answer to 2 significant digits.
Answer:
0.17 g
Explanation:
Since the volume of gas collected is 132 mL, we need to find the number of moles of gas present in 132 mL.
So, number of moles, n = volume of gas, v/molar volume, V
n = v/V where v = 132 mL = 0.132 L and V = 22.4 L
So, substituting the values of the variables into the equation, we have
n = v/V
n = 0.132 L/22.4 L
n = 0.005893 mol
We then need to calculate the molar mass of CO, M = atomic mass of carbon + atomic mass of oxygen = 12 g/mol + 16 g/mol = 28 g/mol
Also, number of moles of gas, n = m/M where m = mass of CO and M = molar mass of CO
m = nM
m = 0.005893 mol × 28 g/mol
m = 0.165004 g
m ≅ 0.17 g to 2 significant digits
Classify the processes as endothermic or exothermic.
a. Ice melting
b. Water condensing on surface
c. Baking a cake
d. The chemical reaction inside an instant cold pack.
e. A car using gasoline
endothermic absorbs heat
exothermic gives heat
a. endothermic
b. exothermic
c. endothermic
d. exothermic
a. Ice melting - endothermic
b. Water condensing on the surface - exothermic
c. Baking a cake - endothermic
d. The chemical reaction inside an instant cold pack - endothermic
e. A car using gasoline - exothermic
What is an exothermic and endothermic reaction?An exothermic reaction can be described as a thermodynamic chemical reaction that emits energy from the system to its surroundings usually in the form of light, heat, or sound.
While an endothermic reaction can be described as an opposite of an exothermic reaction where the energy gains in the form of heat. In exothermic chemical reactions, the bond energy is transformed into thermal energy.
In exothermic reactions, the reaction happens the form of the kinetic energy of molecules when the energy is released. The release of energy is due to the electronic transition of electrons from one energy level to another.
The burning of gasoline, and water condensation is also an exothermic reaction in which energy is released while ice melting and baking cake is an endothermic reaction.
Learn more about the exothermic process, here:
brainly.com/question/12321421
#SPJ5
Use the following key to classify each of the elements below in its elemental form:
a. Discrete atoms
b. Molecules
c. Metallic lattice
d. Covalent Network.
1. Phosporus
2. Bromine
3. Hydrogen
4. Krypton
Explanation:
Given set of elements in one column and their classification in another column.
1. Phosporus c.Metallic lattice
2. Bromine d.Covalent network.
3. Hydrogen b. Molecules
4. Krypton a. Discrete atoms
Since Krypton is an inert gas and it exists in discrete atoms.
Hydrogen exists as a diatomic gas.
Bromine exists as Br_2 liquid and is held by covalent bonds.
Phosphorus exists as P_4 molecules and it exits as a metallic lattice.
what is perodic table list all the elements up to 30 with their valencies
Answer:
a table of the chemical elements arranged in order of atomic number, usually in rows, so that elements with similar atomic structure (and hence similar chemical properties) appear in vertical columns.
Calculate the mass of sodium phosphate in aqueous solution to fully react with 37 g of chromium nitrate(III) an aqueous solution?(report answer in grams and only three Sigg figs do not put the unit)
Answer:
41 g
Explanation:
The equation of the reaction is;
Cr(NO3)3(aq)+Na3PO4(aq)=3NaNO3(s)+CrPO4(aq)
Number of moles of chromium nitrate = 37g/ 146.97 g/mol = 0.25 moles
1 mole of sodium phosphate reacts with 1 mole of chromium nitrate
x moles of sodium phosphate react as with 0.25 moles of chromium nitrate
x= 1 × 0.25/1
x= 0.25 moles
Mass of sodium phosphate = 0.25 moles × 163.94 g/mol
Mass of sodium phosphate = 41 g
