In lipid bilayers, there is an order-to-disorder transition similar to the melting of a crystal. Comparing a lipid bilayer that is made up mostly of palmitoleic acid to one made up mostly of palmitic acid, which would have a higher melting transition temperature

Answer:

Calcium is a chemical element with the symbol Ca and atomic number 20.

Calcium is a mineral that is necessary for life. In addition to building bones and keeping them healthy, calcium enables our blood to clot, our muscles to contract, and our heart to beat. About 99% of the calcium in our bodies is in our bones and teeth.

Answer:

[tex]\boxed {\boxed {\sf 0.078 \ L }}[/tex]

Explanation:

We are asked to find the volume of a solution given the moles of solute and molarity.

Molarity is a measure of concentration in moles per liter. It is calculated using the following formula:

[tex]molarity= \frac{moles \ of \ solute}{liters \ of \ solution}[/tex]

We know there are 0.14 moles of potassium chloride (KCl), which is the solute. The molarity of the solution is 1.8 molar or 1.8 moles of potassium chloride per liter.

Substitute these values/variables into the formula.

[tex]1.8 \ mol \ KCl/ L = \frac { 0.14 \ mol \ KCl}{x}[/tex]

We are solving for x, so we must isolate the variable. First, cross multiply. Multiply the first numerator and second denominator, then the first denominator and second numerator.

[tex]\frac {1.8 \ mol \ KCl/L}{1} = \frac{0.14 \ mol \ KCl}{x}[/tex]

[tex]1.8 \ mol \ KCl/ L *x = 1*0.14 \ mol \ KCl[/tex]

[tex]1.8 \ mol \ KCl/ L *x = 0.14 \ mol \ KCl[/tex]

Now x is being multiplied by 1.8 moles of potassium chloride per liter. The inverse operation of multiplication is division, so we divide both sides by 1.8 mol KCl/L.

[tex]\frac {1.8 \ mol \ KCl/ L *x}{1.8 \ mol \ KCl/L} = \frac{0.14 \ mol \ KCl}{1.8 \ mol \ KCl/L}[/tex]

[tex]x= \frac{0.14 \ mol \ KCl}{1.8 \ mol \ KCl/L}[/tex]

The units of moles of potassium chloride cancel.

[tex]x= \frac{0.14 }{1.8 L}[/tex]

[tex]x=0.07777777778 \ L[/tex]

The original measurements of moles and molarity have 2 significant figures, so our answer must have the same. For the number we found, that is the thousandth place. The 7 in the ten-thousandth place tells us to round the 7 up to a 8.

[tex]x \approx 0.078 \ L[/tex]

There are approximately 0.078 liters of solution.

Answer:

ggggggggggggg

Explanation:

gggggggggggthyjum

Answer:

Quantization is the process of constraining an input from a continuous or otherwise large set of values (such as the real numbers) to a discrete set (such as the integers).

Explanation:

Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.

In Chemistry , the concept that a system cannot have any possible energy value but instead is limited to certain specific energy values (states). This states depend on the specific system in question.

Under this system, Energy could be gained or lost only in integral multiples of some smallest unit of energy, a quantum (the smallest possible unit of energy).

Hence, Quantization refers to the situation where an electromagnetic field consists of discrete energy parcels, photons.

Learn more about Quantum here ;

https://brainly.com/question/16746749

#SPJ2

Answer:

A BEC ( Bose - Einstein condensate ) is a state of matter of a dilute gas of bosons cooled to temperatures very close to absolute zero is called BEC.

Examples - Superconductors and superfluids are the two examples of BEC.

Explanation:

Answer:

a. 100.0 mL of 0.10 M NH₃ with 100.0 mL of 0.15 M NH₄Cl.

c. 50.0 mL of 0.15 M HF with 20.0 mL of 0.15 M NaOH.

Explanation:

A buffer system is formed in 1 of 2 ways:

Determine whether mixing each pair of the following results in a buffer.

a. 100.0 mL of 0.10 M NH₃ with 100.0 mL of 0.15 M NH₄Cl.

YES. NH₃ is a weak base and NH₄⁺ (from NH₄Cl ) is its conjugate base.

b. 50.0 mL of 0.10 M HCl with 35.0 mL of 0.150 M NaOH.

NO. HCl is a strong acid and NaOH is a strong base.

c. 50.0 mL of 0.15 M HF with 20.0 mL of 0.15 M NaOH.

YES. HF is a weak acid and it reacts with NaOH to form NaF, which contains F⁻ (its conjugate base).

d. 175.0 mL of 0.10 M NH₃ with 150.0 mL of 0.12 M NaOH.

NO. Both are bases.

Answer:

A fire class is a system of categorising fire with regard to the type of material and fuel for combustion. Class letters are often assigned to the different types of fire, but these differ between territories. There are separate standards for the United States, Europe, and Australia

Answer:

final-intial temperature= enthalpy change

Plants play a vital role in the environment because photosynthesis uses atmospheric carbon dioxide and water to produce sugars and oxygen. Option C is correct.

Photosynthesis is the process by which plants, algae, and some bacteria convert light energy into chemical energy in the form of glucose (sugar). This process occurs in the chloroplasts of plant cells and requires the presence of sunlight, carbon dioxide (CO₂), and water (H₂O).

During photosynthesis, plants absorb carbon dioxide from the atmosphere through tiny openings called stomata in their leaves. At the same time, they take in water from the soil through their roots. Through a series of complex chemical reactions, the energy from sunlight is used to combine carbon dioxide and water, resulting in the production of glucose (sugar) and the release of oxygen (O₂) as a byproduct.

This process is represented by the equation:

6CO₂ + 6H₂O + sunlight → C₆H₁₂O₆ (glucose) + 6O₂

Plants use the glucose produced through photosynthesis as a source of energy for various metabolic processes and growth. The released oxygen is essential for the survival of other organisms, including humans, as it is used in cellular respiration to release energy from glucose.

Hence, C. is the correct option.

To know more about chemical energy here

https://brainly.com/question/1371184

#SPJ2

Answer: Volume occupied by given neon sample at standard condition is 123.84 L.

Explanation:

Given: [tex]V_{1}[/tex] = 105 L,    [tex]T_{1} = 27^{o}C = (27 + 273) K = 300 K[/tex],     [tex]P_{1}[/tex] = 985 torr

At standard conditions,

[tex]T_{2}[/tex] = 273 K,     [tex]P_{2}[/tex] = 760 K,        [tex]V_{2}[/tex] = ?

Formula used to calculate the volume is as follows.

[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}[/tex]

Substitute the values into above formula as follows.

[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}\\\frac{985 torr \times 105 L}{300 K} = \frac{760 torr \times V_{2}}{273 K}\\V_{2} = \frac{94116.75}{760} L\\= 123.84 L[/tex]

Thus, we can conclude that volume occupied by given neon sample at standard condition is 123.84 L.

I think 2 answer is write

Answer:

It is a becaues i am a doctor and i know about that

Explanation:Just here to help

The  structure of a compound C₆H₁₄ with a base peak at m/z 43 is none of these .

Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.

Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:

1)Molecular compounds where in atoms are joined by covalent bonds.

2) ionic compounds where atoms are joined by ionic bond.

3)Inter-metallic compounds where atoms are held by metallic bonds

4) co-ordination complexes where atoms are held by co-ordinate bonds.

They have a unique chemical structure held together by chemical bonds Compounds have different properties as those of elements because when a compound is formed the properties of the substance are totally altered.

Learn more about compounds,here:

https://brainly.com/question/13516179

#SPJ6

Answer:

a. It turns color in the presence of an enzyme that us bound to the secondary antibody.

Explanation:

The compound chloronapthenel is used in the reaction because it changes the color in the presence of an enzyme. It is strong organic compound which is used in biochemical processes.

Answer:

5.75L is the volume of the sample after the reaction

Explanation:

Based on the reaction, 1 mole of H2 reacts with 1 mole of O2 to produce 1 mole of H2O2.

As in the reaction, 0.1200 moles of H2 and 0.1200 moles of O2 are added, 0.1200 moles of H2O2 are produced.

Before the reaction, the moles of gas are 0.2400 moles and after the reaction the moles are 0.1200 moles of gas.

Based on Avogadro's law, the moles of a gas are directly proportional to the volume under temperatura and pressure constant. The equation is:

V1/n1 = V2/n2

Where V is volume and n are moles of 1, initial state and 2, final state.

Replacing:

V1 = 11.5L

n1 = 0.2400 moles

V2 = ?

n2 = 0.1200 moles

11.5L*0.1200 moles / 0.2400 moles = V2

V2 = 5.75L is the volume of the sample after the reaction

Answer:

1. Water purification method by reverse osmosis – membrane filtration

2. Method of purifying pure water by filter

3. Demineralization by ion exchange method

3. Demineralization by ion exchange method

Explanation:

The force exerted on the container by the particles of the matter is called pressure. The tank containing oxygen gas at 2.551 atm will have a pressure of 1939 mm Hg.

Pressure is the property used to estimate the force experienced by the system due to the liquid or the gas held in it. The pressure of the gas can be calculated by the ideal gas and force and area.

The pressure is created due to the collision of the particles of the gases and liquids on the wall perpendicularly. It is estimated in Pascal (Pa) as the standard unit along with atm and mmHg.

It is known that 1 atm = 760 mm Hg

Given,

The pressure of oxygen gas = 2.551 atm

Using the conversion factor the pressure from atm to mm Hg is calculated as,

1 atm = 760 mm Hg

2.551 atm = (2.551 atm × 760 mm Hg) ÷ 1 atm

= 1938.76 mmHg

Therefore, 1939 mm Hg is the pressure of the oxygen gas.

Learn more about pressure here:

https://brainly.com/question/20050281

#SPJ2

Answer:

In three mocelus 0.0001 gram.

Answer:

I think the answer is..

The name of molecules formed by the element.

I hope it will help you !

The wavelength of the color cyan is 508 nm.

To solve the problem, we use the following equation that relates the frequency (ν) and the wavelength (λ) of a wave:

c = λ x ν

Given:

c = speed of light = 3.00 x 10⁸ m/s (is a constant)

ν = 5.902 x 10¹⁴ Hz = 5.902 s⁻¹

We introduce the data to calculate the wavelength in m:

λ = c/ν = (3.00 x 10⁸ m/s)/(5.902 s⁻¹) = 5.08 x 10⁻⁷ m

We know that 10⁻⁹m = 1 nm, so we convert λ to nm:

λ = 5.08 x 10⁻⁷ m x 1 nm/10⁻⁹m = 508 nm

To learn more about the relationship between frequency and wavelength in a wave, you can visit: https://brainly.com/question/4386945

The question is incomplete. The complete question is :

Hydrogen [tex](H_2)[/tex] gas and oxygen [tex](O_2)[/tex] gas react to form water vapor [tex](H_2O)[/tex]. Suppose you have 11.0 mol of [tex]H_2[/tex] and 13.0 mol of [tex]O_2[/tex] in a reactor. Calculate the largest amount of [tex]H_2O[/tex] that could be produced. Round your answer to the nearest 0.1 mol .

Solution :

The balanced reaction for reaction is :

[tex]$2H_2(g) \ \ \ \ + \ \ \ \ \ O_2(g)\ \ \ \rightarrow \ \ \ \ 2H_2O(g)$[/tex]

11.0                      13.0

11/2                       13/1     (dividing by the co-efficient)

6.5 mol               13 mol    (minimum is limiting reagent as it is completely consumed during the reaction)

Therefore, [tex]H_2[/tex] is limiting reagent. It's stoichiometry decides the product formation amount from equation above it is clear that number of moles for [tex]H_2O[/tex] will be produced = number of moles of [tex]H_2[/tex]

                                     = 11.0 mol

Answer:

option (D) NaOH is right answer

A neutralization reaction is "a reaction in which an acid and a base react to form water and a salt and involves H+ ions and OH- ions to produce water.

An acid is "any hydrogen-containing substance that is capable of donating a proton or hydrogen ion to another substance".

Base is "a substance that gets dissociated in an aqueous solution to form hydroxide ions OH-".

Hence, NaOH can be used to neutralize HF.

To learn more about Neutralization reaction here

https://brainly.com/question/24367029

#SPJ2

Answer:

a. LiF(s) ⇄ Li⁺(aq) + F⁻(aq)

b. [Li⁺] = [F⁻] = 6.2 x 10⁻² M

c. Ksp = [Li⁺] [F⁻]

d. Ksp = 3.8 × 10⁻³

Explanation:

The solubility (S) of lithium fluoride, LiF, is 1.6 g/L, or 6.2 x 10⁻² M.

a. The balanced solubility equilibrium equation for LiF is:

LiF(s) ⇄ Li⁺(aq) + F⁻(aq)

b. We will make an ICE chart.

        LiF(s) ⇄ Li⁺(aq) + F⁻(aq)

I                       0           0

C                     +S         +S

E                       S           S

Then, [Li⁺] = [F⁻] = S = 6.2 x 10⁻² M

c. The solubility product constant, Ksp​, is the equilibrium constant for a solid substance dissolving in an aqueous solution.

Ksp = [Li⁺] [F⁻]

d.

Ksp = [Li⁺] [F⁻] = (6.2 x 10⁻²)² = 3.8 × 10⁻³

Answer:

7 mol CuO

0.5 mol O₂

Explanation:

Step 1: Write the balanced equation

2 Cu + O₂ ⇒ 2 CuO

Step 2: Identify the limiting reactant

The theoretical molar ratio (TMR) of Cu to O₂ is 2:1.

The experimental molar ratio (EMR) of Cu to O₂ is 7:4 = 1.75:1.

Since TMR > EMR, Cu is the limiting reactant

Step 3: Calculate the amount of CuO produced

7 mol Cu × 2 mol CuO/2 mol Cu = 7 mol CuO

Step 4: Calculate the excess of O₂ that remains

The amount of O₂ that reacts is:

7 mol Cu × 1 mol O₂/2 mol Cu = 3.5 mol O₂

The excess of O₂ that remains is:

4 mol - 3.5 mol = 0.5 mol

Answer:

As light is emitted from the filament, the energy in the metal is replaced as lightbulbs absorb background radiation. This prevents the filament from burning out quickly but the radiation cannot be used as power so electricity is still required for the lightbulb to work.

Answer:

The total consumer surplus is 240.

Explanation:

If p=12 then q=20

0.5×(36−12)×20=240

here's the graph to help you see the change.

Answer:

Option C. Gain 1 electron

Explanation:

Valence electron(s) are the electron(s) located on the outermost shell of an atom. Valency is simply defined as the combining power of an atom.

Chlorine (Cl) atom has 7 valence electron. This implies that Cl needs just one electron to complete it's octet configuration. It will be difficult for Cl to lose any of it's valence electron(s). Cl can either gain or share 1 electron to become stable.

Thus, considering the options given in the question above, option C gives the correct answer to the question.

Answer:

Na2S(aq)+Cd(No3)2(aq)=CdS(s)+2NaNo3(aq)

Answer: it’s checkbox 2&3