in an experiment, it takes you one hour to memorize all the terms on a list. two years later you relearn them in 45 minutes. the time difference of 15 minutes, or 25 percent (15 divided by 60 times 100), is called the

Answer:

-21

Step-by-step explanation:

y^2 + 8y - 9                       y = -6

(-6)² + 8(-6) - 9

36 - 48 - 9

-21

So, the answer is -21

Answer:y=\frac{7}{12}-i\frac{\sqrt{167}}{12},\:y=\frac{7}{12}+i\frac{\sqrt{167}}{12}

Step-by-step explanation:y=\frac{7}{12}-i\frac{\sqrt{167}}{12},\:y=\frac{7}{12}+i\frac{\sqrt{167}}{12}

Answer:

operaciones vectoriales, Extensión de las leyes del álgebra elemental a los vectores. Incluyen suma, resta y tres tipos de multiplicación. La suma de dos vectores es un tercer vector, representado como la diagonal del paralelogramo construido con los dos vectores originales como lados.

Answer:

operaciones vectoriales, Extensión de las leyes del álgebra elemental a los vectores. Incluyen suma, resta y tres tipos de multiplicación. La suma de dos vectores es un tercer vector, representado como la diagonal del paralelogramo construido con los dos vectores originales como lados.

Step-by-step explanation:

Answer:

Point-Slope Form: y - 1 = -1/2(x - 4) or Standard Form: y = -1/2x + 3

Step-by-step explanation:

For a line to be perpendicular, you take the negative inverse of the slope of 2x - y = 4. To do this, rearrange the y to one side and you get y = 2x - 4. The slope of the line is 2. So, taking the negative inverse would be -1/m (with m being slope of the the equation given in the problem. This would give you -1/2.

Using point slope formula, y - y1 = m(x - x1), you can plug in the point given, (4,1) and the slope you found to get y - 1 = -1/2(x - 4). For standard form, isolating the y gets you y = -1/2x + 3.

You can check your answer by using Desmos by putting in the line 2x - y = 4, the point (4,1), and the equation you got as your answer. You will see that the equation is perpendicular to 2x - y = 4 and passes through point (4,1). Your equation of the line is y - 1 = -1/2(x - 4) or y = -1/2x + 3

Therefore, Person A is approximately 95.17 miles away from the building.

To find out how far person A is from the building, we'll need to use trigonometry. The diagram below shows the situation.

Given that Person A's angle of elevation to the building is 35 degrees, we'll let angle BAC be 35 degrees.

Similarly, since Person B's angle of elevation is 77 degrees, we'll let angle ABC be 77 degrees. We'll also let AB be x, the distance from Person A to the building, and BC be 8 miles, the distance from Person B to the building.

First, we'll use the tangent function to find the height of the building. In triangle ABC, tan(77) = height/8. Solving for the height, we get:

height = 8tan(77) ≈ 61.23 miles.

Next, we'll use the tangent function again to find x. In triangle ABC, tan(35) = height/x + 8. Solving for x, we get:

x = (height)/(tan(35)) - 8
≈ 103.17 miles - 8
≈ 95.17 miles.
for such more questions on  elevation

https://brainly.com/question/25748640

#SPJ11

Answer:

The answer to 1 + 1 is 2.

Very complicated problem, please mark brainliest!

Answer:

1+1 = 2

Or, 1=2-1

1=1

we know value of one is one

so,

1+1=11

In summary, to find the null spaces of the matrices given in exercises 9 and 10, use the Gauss-Jordan elimination method and refer to the Remarks that follow example 3 in section 4.2 of the text. This will give the dimension of the null space and the number of free variables.
In exercises 9 and 10, the null space of the given matrices can be found by solving the homogeneous linear system of equations. In order to do this, use the Gauss-Jordan elimination method. Refer to example 3 in section 4.2 of the text for a detailed explanation. Afterwards, use the Remarks that follow the example to determine the dimension of the null space and the number of free variables.

The null space of a matrix is the set of all vectors that produce a zero vector when the matrix is multiplied by the vector. Therefore, to find the null space of a matrix, the homogeneous linear system of equations needs to be solved. The Gauss-Jordan elimination method involves adding multiples of one row to another to get a row with all zeroes. After this is done for all the rows, the equations can be solved for the free variables. The number of free variables will determine the dimension of the null space. Refer to example 3 in section 4.2 of the text for more details.

The Remarks that follow the example are important when determining the dimension of the null space and the number of free variables. In the Remarks, it is mentioned that the number of free variables is equal to the number of columns with a zero row. Therefore, after using the Gauss-Jordan elimination method to get the row with all zeroes, the number of columns with a zero row can be counted. This will give the dimension of the null space and the number of free variables.

for such more questions on  Gauss-Jordan elimination

https://brainly.com/question/20536857

#SPJ11

The triangle LMN, with vertices L(6, −8), M(4, −4), and N(−12, 2), dilated with respect to the origin by a scale factor of 1/2, results in triangle L'M'N', with vertices L'(3, -4), M'(2, -2), and N'(-6, 1)

To dilate a triangle with respect to the origin, we need to multiply the coordinates of each vertex by the scale factor. In this case, the scale factor is 1/2, so we multiply each coordinate by 1/2.

The coordinates of L' are obtained by multiplying the coordinates of L by 1/2:

L'((1/2)6, (1/2)(-8)) = (3, -4)

The coordinates of M' are obtained by multiplying the coordinates of M by 1/2:

M'((1/2)4, (1/2)(-4)) = (2, -2)

The coordinates of N' are obtained by multiplying the coordinates of N by scale factor 1/2:

N'((1/2)×(-12), (1/2)×2) = (-6, 1)

Learn more about dilation here

brainly.com/question/26155897

#SPJ4

The given question is incomplete, the complete question is:

Triangle LMN with vertices L(6, −8), M(4, −4), and N(−12, 2) is dilated with respect to origin by a scale factor of 2 to obtain triangle L′M′N′. What are the new coordinates of  L′M′N′ ?

By using  Bayes' theorem in probability.

a) The probability that isaac would not become a hurricane but remain a tropical storm when it reached the gulf of mexico is 0.31.

b) P(H|c) = 0.4493

c) It can be observed that the likelihood of a tropical storm developing into a hurricane decreases slightly when it passes over Cuba. This can be inferred from the fact that the conditional probability of a hurricane forming given that the storm has passed over Cuba (P(H|c) = 0.4493) is lower than the initial probability of 0.69.

a) The probability that Isaac would not become a hurricane but remain a tropical storm when it reached the Gulf of Mexico is:

P(not hurricane) = 1 - P(hurricane) = 1 - 0.69 = 0.31

So the probability is 0.31 (to 2 decimals).

b) We need to use Bayes' theorem to calculate the probabilities:

P(c|H) = P(H|c) * P(c) / P(H)

P(c|T) = P(T|c) * P(c) / P(T)

where c denotes passing over Cuba, H denotes becoming a hurricane, and T denotes remaining a tropical storm.

From the problem, we have:

P(H) = 0.69

P(T) = 1 - P(H) = 0.31

P(c|H) = 0.08

P(c|T) = 0.20

To calculate P(c), we need to use the law of total probability:

P(c) = P(c|H) * P(H) + P(c|T) * P(T)

= 0.08 * 0.69 + 0.20 * 0.31

= 0.1228

Now we can calculate P(c|H) and P(c|T):

P(c|H) = 0.08 * 0.69 / 0.1228

= 0.4493 (to 2 decimals)

P(c|T) = 0.20 * 0.31 / 0.1228

= 0.5065 (to 2 decimals)

To calculate P(H|c), we use Bayes' theorem again:

P(H|c) = P(c|H) * P(H) / P(c)

= 0.08 * 0.69 / 0.1228

= 0.4493 (to 4 decimals)

c) Passing over a landmass such as Cuba can alter the probability of becoming a hurricane because it can either enhance or weaken the storm. In this case, we can see that the probability of becoming a hurricane is actually slightly lower when a tropical storm passes over Cuba, as P(H|c) = 0.4493 is lower than the initial probability of 0.69. However, it is important to note that this is just one example and the effect of passing over a landmass can vary depending on many factors.

To know about "Bayes' theorem": https://brainly.com/question/14989160

#SPJ11

we have

13x+6y=−30------------- > 6y=-30-13x--------------- > y=(-30-13x)/6

x−2y=−4-- > 2y=x+4-------- > y=(x+4)/2

Using a graphing tool---------- > see attached figure

the solution of the system is the point (-2.625,0688)

the best estimate pair for the solution to the system is (−2.5, 0.75)

Based on the given data, The shape's whole surface area is about 252 mm².

Based on the image, the shape appears to be a set of rectangles with different lengths and widths.

To find the area of this shape, we can break it down into smaller rectangles and add up their areas.

Starting from the bottom, we can see that the first rectangle has a length of 6 mm and a width of 4 mm. Its area is:

Area1

= 6 mm × 4 mm

= 24 mm²

Moving up to the second rectangle, we see that it has a length of 6 mm and a width of 3 mm. Its area is:

Area2

= 6 mm × 3 mm

= 18 mm²

The third rectangle has a length of 6 mm and a width of 5 mm. Its area is:

Area3

= 6 mm × 5 mm

= 30 mm²

The fourth rectangle has a length of 6 mm and a width of 3 mm. Its area is:

Area4

= 6 mm × 3 mm

= 18 mm²

The fifth rectangle has a length of 6 mm and a width of 15 mm. Its area is:

Area5

= 6 mm × 15 mm

= 90 mm²

The sixth rectangle has a length of 3 mm and a width of 9 mm. Its area is:

Area6

= 3 mm × 9 mm

= 27 mm²

Finally, the seventh rectangle has a length of 5 mm and a width of 9 mm. Its area is:

Area7

= 5 mm × 9 mm

= 45 mm²

To find the total area of the shape, we can add up the areas of all seven rectangles:

Total Area

= Area1 + Area2 + Area3 + Area4 + Area5 + Area6 + Area7

= 24 mm² + 18 mm² + 30 mm² + 18 mm² + 90 mm² + 27 mm² + 45 mm²

= 252 mm²

Therefore, the total area of the shape is approximately 252 mm².

To learn more about area click here

brainly.com/question/27683633

#SPJ4

Answer:

X

Step-by-step explanation:

We first must check the total amount of breakfast. Y happens to have 130 instead of 125. Now, we see that W and Z have a majority on strawberries with oatmeal, which is not what we are looking for. The last answer we have is X, where there is a majority of oatmeal + blueberries and there is a total of 125 breakfasts.

Hope this helps!

Answer: The given equation 2x + 5y = 10 can be rewritten in slope-intercept form (y = mx + b) by solving for y:

2x + 5y = 10

5y = -2x + 10

y = (-2/5)x + 2

where the slope is -2/5.

Since we want to find the equation of a line parallel to this one, the slope of the new line will also be -2/5. We can use the point-slope form of the equation of a line to find the equation of the new line, using the point (0,-3):

y - y1 = m(x - x1)

where m is the slope and (x1, y1) is the given point.

Substituting m = -2/5, x1 = 0, and y1 = -3, we get:

y - (-3) = (-2/5)(x - 0)

y + 3 = (-2/5)x

y = (-2/5)x - 3

Therefore, the equation of the line parallel to 2x + 5y = 10 which passes through (0,-3) is y = (-2/5)x - 3.

Step-by-step explanation:

Answer:

2x + 5y = - 15

Step-by-step explanation:

the equation of a line in slope- intercept form is

y = mx + c ( m is the slope and c the y- intercept )

given

2x + 5y = 10 ( subtract 2x from both sides )

5y = - 2x + 10 ( divide through by 5 )

y = - [tex]\frac{2}{5}[/tex] x + 2 ← in slope- intercept form

with slope m = - [tex]\frac{2}{5}[/tex]

• Parallel lines have equal slopes , then

y = - [tex]\frac{2}{5}[/tex] x + c

the line crosses the y- axis at (0, - 3 ) ⇒ c = - 3

y = - [tex]\frac{2}{5}[/tex] x - 3 ← equation of parallel line in slope- intercept form

multiply through by 5 to clear the fraction

5y = - 2x - 15 ( add 2x to both sides )

2x + 5y = - 15 ← in standard form

Answer:

slope is 1/3

y-intercept is -4

Step-by-step explanation:

x - 3y = 12

3y = x - 12

y = 1/3x - 4

according to y = mx + b, m is slope and b is y-intercept

slope is 1/3

y-intercept is -4

Answer:

"9 more than A" is a verbal expression.

The probability that an 18-year-old man selected at random is between 70 and 72 inches tall is approximately 0.0793 and the probability that the mean height of a sample of eight 18-year-old men is between 70 and 72 inches is approximately 0.9057 and the probability in part (b) is much higher because the standard deviation is smaller for the x distribution.

What do you mean by normally distributed data?

In statistics, a normal distribution is a probability distribution of a continuous random variable. It is also known as a Gaussian distribution, named after the mathematician Carl Friedrich Gauss. The normal distribution is a symmetric, bell-shaped curve that is defined by its mean and standard deviation.

Data that is normally distributed follows the pattern of the normal distribution curve. In a normal distribution, the majority of the data is clustered around the mean, with progressively fewer data points further away from the mean. The mean, median, and mode are all the same in a perfectly normal distribution.

Calculating the given probabilities :
(a) The probability that an 18-year-old man selected at random is between 70 and 72 inches tall can be found by standardizing the values and using the standard normal distribution table. First, we find the z-scores for 70 and 72 inches:

[tex]z-1 = (70 - 71) / 5 = -0.2[/tex]

[tex]z-2 = (72 - 71) / 5 = 0.2[/tex]

Then, we use the table to find the area between these two z-scores:

[tex]P(-0.2 < Z < 0.2) = 0.0793[/tex]

So the probability that an 18-year-old man selected at random is between 70 and 72 inches tall is approximately 0.0793.

(b) The mean height of a sample of eight 18-year-old men can be considered a random variable with a normal distribution. The mean of this distribution will still be 71 inches, but the standard deviation will be smaller, equal to the population standard deviation divided by the square root of the sample size:

[tex]\sigma_x = \sigma / \sqrt{n} = 5 / \sqrt{8} \approx 1.7678[/tex]

To find the probability that the sample mean height is between 70 and 72 inches, we standardize the values using the sample standard deviation:

[tex]z_1 = (70 - 71) / (5 / \sqrt{8}) \approx -1.7889[/tex]

[tex]z_2 = (72 - 71) / (5 / \sqrt{8}) \approx 1.7889[/tex]

Then, we use the standard normal distribution table to find the area between these two z-scores:

[tex]P(-1.7889 < Z < 1.7889) \approx 0.9057[/tex]

So the probability that the mean height of a sample of eight 18-year-old men is between 70 and 72 inches is approximately 0.9057.

(c) The probability in part (b) is much higher because the standard deviation is smaller for the x distribution. When we take a sample of eight individuals, the variability in their heights is reduced compared to the variability in the population as a whole. This reduction in variability results in a narrower distribution of sample means, with less probability in the tails and more probability around the mean. As a result, it becomes more likely that the sample mean falls within a given interval, such as between 70 and 72 inches.

To know more about normal distribution visit :

brainly.com/question/29509087

#SPJ1

The given numbers are in decimal and binary system and the final result of the given operation is [tex](4675.31)_{10}[/tex].

A binary integer (base-2) is converted to an equivalent decimal number using the binary to decimal conversion formula. (base-10). In mathematics, integers are expressed using a number system. It is a method to display numerical data. The four various numeral systems are as follows:

System of Binary Numbers (Base-2)
system of octal numbers (Base-8)
System of Decimal Numbers (Base-10)
System of Hexadecimal Numbers (Base-16).
We are the two numbers:-

[tex](4623.56)_{10} , (110011.11)_{2}[/tex]

these are in decimal and binary system respectively.

now, we will express them in same system ( here we choose decimal system).

[tex](110011.11)_{2} = (2^{5} + 2^{4} + 0 + 0 + 2^{1} + 2^{0} + 2^{-1} + 2^{-2} )_{10} \\= (2^{5}+2^{4}+0*2^{4}+0*2^{3}+2^{1}+2^{0}+2^{-1}+2^{-2})_{10} \\= (32+16+2+1+0.5+0.25)_{10} \\= (51.75)_{10}[/tex]

Now, addition is done below:-

4623.56+51.75= 4675.31.

hence, the final result of the given operation= [tex](4675.31)_{10}[/tex]

To know more about binary system go through:-

https://brainly.com/question/16612919

#SPJ4

Answer:

(2, 0) and (-1, 0)

Step-by-step explanation:

[tex]4x^2 - 4x - 8 = 0 \text{ // Divide by 4} \\x^2 - x - 2 = 0\\\\x_{1, 2} = \frac{-(-1) \pm \sqrt{(-1)^2 - 4 \times 1 \times (-2)}}{2\times1}\\\\x_{1, 2} = \frac{1 \pm \sqrt{1 + 8}}2\\\\x_{1, 2} = \frac{1 \pm \sqrt9}2\\\\x_{1, 2} = \frac{1 \pm 3}2\\\\x_1 = \frac{1 + 3}2 = \frac42 = 2\\\\x_2 = \frac{1 - 3}2 = \frac{-2}2 = -1[/tex]

Therefore, the zeroes are (2, 0) and (-1, 0).

A theorem which these transformations reveal include the following: theorem of intersecting secants.

In Mathematics and Geometry, the theorem of intersecting secants states that when two lines intersect outside a given circle, the measure of the angle formed by these intersecting lines is equal to one-half (½) of the difference of the two (2) arcs it intercepts.

By applying the theorem of intersecting secants, the value of any of the angle subtended by the intersecting lines can be calculated by using the following mathematical equation:

m∠a = One-half(y – x).

m∠a = ½(y – x).

Where:

x and y represent the angles formed by the intersecting lines.

Therefore, the theorem of intersecting secants describe these set of transformations.

Read more on intersecting secants here: https://brainly.com/question/31049910

#SPJ1

The slopes are,

1) 7/6

2)7/2

3) -1

4) -2

5) 10/9

What is slope?

Calculated using the slope of a line formula, the ratio of "vertical change" to "horizontal change" between two different locations on a line is determined. The difference between the line's y and x coordinate changes is known as the slope of the line.Any two distinct places along the line can be used to determine the slope of any line.

1) The given points , [tex](x_1,y_1) =(0,1)[/tex] and [tex](x_2,y_2) = (6,8)[/tex] then,

=> slope  = [tex]\frac{y_2-y_1}{x_2-x_1}[/tex] = [tex]\frac{8-1}{6-0} = \frac{7}{6}[/tex]

2) The given points [tex](x_1,y_1) =(-1,10)[/tex] and [tex](x_2,y_2) = (-5,-4)[/tex] then,

=> Slope = [tex]\frac{-4-10}{-5+1} = \frac{-14}{-4}=\frac{7}{2}[/tex]

3)  The given points [tex](x_1,y_1) =(-10,2)[/tex] and [tex](x_2,y_2) = (-3,-5)[/tex] then,

=> slope = [tex]\frac{-5-2}{-3+10} = \frac{-7}{7}=-1[/tex]

4)  The given points [tex](x_1,y_1) =(-3,-4)[/tex] and [tex](x_2,y_2) = (-1,-8)[/tex] then,

=> slope = [tex]\frac{-8+4}{-1+3} = \frac{-4}{2}=-2[/tex]

5)The given points [tex](x_1,y_1) =(0,1)[/tex] and [tex](x_2,y_2) = (-9,-9)[/tex] then,

=> slope = [tex]\frac{-9-1}{-9+0} = \frac{-10}{-9}=\frac{10}{9}[/tex]

Hence the slopes are,

1) 7/6

2)7/2

3) -1

4) -2

5) 10/9

To learn more about slope refer the below link

https://brainly.com/question/16949303

#SPJ1

Answer: 46.0 ft

Step-by-step explanation:

[tex]\text{sin} \ 24^o=\dfrac{x}{105}[/tex]

[tex]x=105 \ \text{sin 24}^o[/tex]

So, the distance above the ground is [tex]\text{105 sin} \ 24^o+3.25\thickapprox \boxed{46.0 \ \text{ft}}[/tex]

The measure of ∠J in ΔJKL is approximately 57.5 degrees.

The measure of ∠J in ΔJKL can be found using the trigonometric function tangent, which is defined as the ratio of the opposite side to the adjacent side.

The straight line that "just touches" the plane curve at a given point is called the tangent line in geometry. It was defined by Leibniz as the line that passes through two infinitely close points on the curve.

tan(∠J) = JK/KL

tan(∠J) = 7.3/4.7

∠J = arctan(7.3/4.7)

∠J = 57.5 degrees (rounded to the nearest tenth of a degree)

Therefore, the measure of ∠J in ΔJKL is approximately 57.5 degrees.

Learn more about Triangles

https://brainly.com/question/27996834

#SPJ4

Answer:

Step-by-step explanation:

i think you have to times it

The amount that each type would be 11.87 lbs of cashews and 15.13 lbs of brazil nuts

1. First, find the total cost of 27 lbs of the mixture: 27 lbs x $6.41/lb = $171.07.
2. Next, find the cost of cashews and brazil nuts in the mixture. Cashews cost $7.70/lb and brazil nuts cost $4.80/lb.
3. Subtract the cost of the brazil nuts from the total cost of the mixture: $171.07 - (27 lbs x $4.80/lb) = $105.27.
4. Divide the cost of the cashews ($105.27) by the cost of one pound of cashews ($7.70): $105.27/$7.70 = 13.66 lbs.
5. Subtract the number of pounds of cashews (13.66) from the total pounds of the mixture (27) to find the number of pounds of brazil nuts: 27 - 13.66 = 15.13 lbs.
6. Therefore, the mixture should contain 11.87 lbs of cashews and 15.13 lbs of brazil nuts.

See more about total cost at: https://brainly.com/question/5168855

#SPJ11

The work required to pump all the water out of the rectangular swimming pool over the top is approximately 2,323,200 ft-lb.

We have,

To find the work required to pump all the water out of the rectangular swimming pool, we can use the concept of work as the force multiplied by the distance.

First, let's calculate the weight of the water in the pool.

The weight of an object is given by the formula:

Weight = mass x gravitational acceleration

Since the density of water is given as 1 lb/ft³, we need to find the volume of water in the pool.

The volume of the pool is given by the formula:

Volume = length x width x depth

Volume = 50 ft x 30 ft x 6 ft = 9000 ft³

Now, let's calculate the weight of the water:

Weight = density x volume x gravitational acceleration

Weight = 1 lb/ft³ x 9000 ft³ x 32.2 ft/s² ≈ 290,400 lb

To pump all the water out over the top, we need to raise it to the height of the pool, which is 8 ft.

The work required to pump the water out is given by the formula:

Work = weight x height

Work = 290,400 lb x 8 ft = 2,323,200 ft-lb

Therefore,

The work required to pump all the water out of the rectangular swimming pool over the top is approximately 2,323,200 ft-lb.

Learn more about rectangles here:

https://brainly.com/question/15019502

#SPJ12

Answer:

a=1/3

Step-by-step explanation:

First, expand the brackets by doing multiplication:

2+6a+3=3a+6

Then, move the unknown to the left and the numbers to the right:

3a=6-5

3a=1

a=1/3

The solution to the given equation is -1.

In mathematics, an equation is a formula that expresses the equality of two expressions, by connecting them with the equals sign =.

The solution of an equation is the set of all values that, when substituted for unknowns, make an equation true.

The given equation is 2+3(2a+1)=3(a+2)

2+6a+3=3a+2

6a+5=3a+2

6a-3a=2-5

3a=-3

a=-1

Therefore, the solution to the given equation is -1.

To learn more about an equation visit:

https://brainly.com/question/14686792.

#SPJ2

The distance Mrs. Smith covers is 3520 yards during the duration of the week by Friday morning.

One week has seven days in total.

Mrs. Smith walks half a mile each day after work, she walks a total of

0.5 miles/ day × 7 days/ week = 3.5 miles/ week

Now, if we calculate the distance on Friday morning, she must have walked four times till Friday morning since she has to walk after her work.

Therefore,

0.5 miles/ day × 4 days = 2 miles

To convert miles to yards, we can use the fact that there are 1760 yards in one mile:

2 miles/week × 1760 yards/mile = 3520 yards/week

Therefore, by Friday morning, Mrs. Smith will have walked 3520 yards.

To learn more about the distance at

https://brainly.com/question/26264531

#SPJ4

Random sampling 50 batteries throughout the day and testing to see if they would provide most valid results.

A sample is described as a smaller, more manageable representation of a larger group. A smaller population with characteristics of a larger one. A sample is used in statistical analysis when the population size is too large to include all participants or observations in the test.

The sample may be biased if it is taken from the first 25 batteries made each day or the last 25 batteries made each day.

The first and last battery made each day could not be an accurate representation of the total quality of the batteries produced that day if the battery manufacturing process is not consistent thought the day.

Although the battery quality can change during the day, sampling the first 50 batteries produced each day may also add bias into the sample.

The ideal course of action is to randomly select 50 batteries throughout the day, since this helps to ensure that the sample is reflective of the general calibre of batteries manufactured that day.

A more accurate image of the quality of the batteries manufactured can be obtained using this method, which is also more likely to capture any variations in battery quality over the day.

To know more about Random sampling go through:-

https://brainly.com/question/13219833

#SPJ4

The distribution is skewed to the right.

If the median is to the left of the center of the box and the right whisker is substantially longer than the left whisker in a box plot, then the distribution is skewed to the right.

This means that the majority of the data is clustered on the left side of the box plot and there are some extreme values on the right side that are causing the right whisker to be longer.

The median being to the left of the center of the box indicates that the data is not symmetric and is pulled to the left by the majority of the values.

Learn more about skewed distribution

brainly.com/question/1604092

#SPJ11

An assignment of probabilities to events in a sample space must obey all of the following: They must obey the addition rule for disjoint events, They must sum to 1 when adding over all events in the sample space, and The probability of any event must be a number between 0 and 1, inclusive. Hence, the correct option is All of the above.

Probability is the branch of mathematics that deals with the likelihood of a random event occurring. Probability is concerned with quantifying the probability of different results in a certain event.

The possibility that a specific event will occur is calculated using probability. Probability is calculated using several methods in mathematics, including axioms, probability spaces, events, random variables, and expectation values.

Learn more about Probability here: https://brainly.com/question/25839839

#SPJ11

The missing amounts for Walco Corporation and Gunther Enterprises assuming  all changes in stockholders equity are due to changes in retained earnings are
(a) Walco Corporation Total Stockholders' Equity =  $54,000
(b) Walco Corporation Total Assets = $182,000
(c) Walco Corporation Dividends = $47,100
(d) Gunther Enterprises Total Liabilities = $140,000
(e) Gunther Enterprises Total Stockholders' Equity = $91,500
(f) Gunther Enterprises Total Revenues =  $135,100

A balance sheet is a financial statement that reports a company's assets, liabilities, and stockholder equity on a specific date. Assets are resources a company owns that have monetary value, liabilities are obligations that must be paid in the future, and stockholder equity is the difference between a company's assets and liabilities. To calculate the missing amounts, you need to subtract the beginning of year figures from the end of year figures.

a) Total liabilities + Total stockholders' equity = Total assets

Total liabilities + $54,000 = $100,000

Total liabilities = $46,000

(b) Total assets = Total liabilities + Total stockholders' equity

Total assets = $128,000 + $54,000

Total assets = $182,000

(c) Changes during year in retained earnings = Total revenues - Total expenses - Dividends

Changes during year in retained earnings = $219,000 - $167,000 - $4,900

Changes during year in retained earnings = $47,100

The missing values for Gunther Enterprises:

(d) Total liabilities + Total stockholders' equity = Total assets

$67,500 + $(e) = $159,000

$(e) = $91,500

(f) Changes during year in retained earnings = Total revenues - Total expenses - Dividends

Changes during year in retained earnings = $(f) - $79,000 - $4,900

Changes during year in retained earnings = $(f) - $83,900

Using the balance sheet equation, we can find the missing values:

(d) Total liabilities = Total assets - Total stockholders' equity

Total liabilities = $159,000 - $67,500

Total liabilities = $91,500

(e) Total stockholders' equity = Total assets - Total liabilities

Total stockholders' equity = $190,000 - $50,000

Total stockholders' equity = $140,000

(f) Changes during year in retained earnings = Total revenues - Total expenses - Dividends

Changes during year in retained earnings = $219,000 - $79,000 - $4,900

Changes during year in retained earnings = $135,100

Therefore, the missing amounts are:

(a) Walco Corporation Total Stockholders' Equity =  $54,000
(b) Walco Corporation Total Assets = $182,000
(c) Walco Corporation Dividends = $47,100
(d) Gunther Enterprises Total Liabilities = $140,000
(e) Gunther Enterprises Total Stockholders' Equity = $91,500
(f) Gunther Enterprises Total Revenues =  $135,100

To learn more about the 'balance sheet':

https://brainly.com/question/1113933

#SPJ11