In a study of the effects of marijuana during pregnancy, measurements on babies of mother who used marijuana during pregnany were compared to measurements on babies of mothers who did not. A 95% confidence interval for the difference in mean head circumference (nonuse minus use) was .61 to 1.19 cm. What can be said from this statement about a p-value for the hypothesis that the mean difference is zero?

The types of inferences that will be made about population parameters are causation, estimation, and regression on the basis of relationship.

Causation is the process of showing the cause-and-effect relationship between two variables. In this case, one variable influences the other variable. This type of inference is significant when making decisions because it helps us understand how a change in one variable leads to a change in another variable.

Estimation: In statistical analysis, estimation refers to determining the possible value of an unknown population parameter. It is impossible to calculate the population parameters directly, and hence we use sample statistics to estimate them.

Regression analysis is the statistical technique used to identify the relationship between two variables. It involves estimating the coefficients of the model that best fit the data.

This type of inference helps us predict the value of a dependent variable based on an independent variable.

Learn more about Inferences here:

https://brainly.com/question/29774121

#SPJ11

First before two trains were [tex]990[/tex] kilometers apart, it will require [tex]5.5[/tex] hours.

Train speed is calculated as total distance traveled divided by travel time. The time it takes for two trains to pass each other is equal to (a+b) / (x+y) if the lengths of the trains, say a or b, are known and they are going at speeds of y and x, respectively.

Typically, a locomotive fueled by electricity or diesel powers trains. If there are several route networks, complicated signaling methods are used. One of the quickest forms of land transportation is rail.

[tex]distance = rate * time[/tex]

distance between trains [tex]= (85 km/h) * t + (95 km/h) * t[/tex]

distance between trains [tex]= (85 + 95) km/h * t[/tex]

distance between trains [tex]= 180 km/h * t[/tex]

Now, we can set up an equation to solve for the time it takes for the trains to be [tex]990[/tex] km apart:

[tex]180 km/h * t = 990 km[/tex]

[tex]t = 990 km / 180 km/h[/tex]

[tex]t = 5.5[/tex] hours

Therefore, it will take [tex]5.5[/tex] hours before the two trains are [tex]990[/tex] km apart.

To know more about trains visit:

https://brainly.com/question/23302264

#SPJ1

Answer:

Yes, No, No.

Explanation:

Answer:

Place an X for the first box as [Yes], [No], [No]

Step-by-step explanation:

When we enter x=2 and y=1 into the first system of equations, we can see that both conditions are met. Thus the answer to this system is (2, 1).

When x=2 and y=1 are substituted into the second system of equations, we obtain 1=-3 and 1=-2, which are false, and so (2, 1) is not a solution for this system.

When x=2 and y=1 are substituted into the third system of equations, the results are -3=-2 and 1=-3, which are false, hence (2, 1) is not a solution for this system.

Answer:

Step-by-step explanation:

This can be solved by taking X as the magnification

8*x = 12cm *10

x= 120/8

x= 30/2= 15

the magnification = 15 times

Answer:

58 degrees

Step-by-step explanation:

51+27=58 degrees

second one is 56 degrees

132-76=56 degrees

Answer:

5/37

Step-by-step explanation:

There are 37 possible outcomes when rolling a 37-sided die, so the probability of rolling any one specific number is 1/37.

To find the probability of rolling any of the given numbers (35, 25, 33, 9, or 19), we need to add the probabilities of rolling each individual number.

Probability of rolling 35: 1/37

Probability of rolling 25: 1/37

Probability of rolling 33: 1/37

Probability of rolling 9: 1/37

Probability of rolling 19: 1/37

The probability of rolling any one of these numbers is the sum of these probabilities:

1/37 + 1/37 + 1/37 + 1/37 + 1/37 = 5/37

So the probability of rolling any of the given numbers is 5/37, which is approximately 0.1351 when rounded to four decimal places.

Therefore , the solution of the given problem of volume comes out to be the response is 900 cubic units.

A three-dimensional object's volume, which is expressed in cubic units, indicates how much space it takes up. These symbols for cubic dimensions are liter and in3. However, understanding an object's volume is necessary to calculate its measurements. It is standard practice to convert the weight of an object into mass units like grams and kilograms.

Here,

The formula V = Bh, when B is the area of the bottom and h is the height of the prism, determines the volume of a right triangle prism.

The prism has an area of because its foundation is a right triangle with 8 and 15-foot-long legs.

=> B = (1/2)bh = (1/2)(8)(15) = 60

The prism's height is specified as 15 inches.

As a result, the prism's capacity is:

=>  900 cubic units are equal to V = Bh = 60(15).

Therefore, the response is 900 cubic units.

To know more about volume , visit:

https://brainly.com/question/13338592

#SPJ1

Answer:

900 cubic units

Step-by-step explanation:

Step-by-step explanation:

a) Area=144m²

side²= 144

side=12m

b) perimeter=32m

4×side=32

side=32/4

side=8m

Answer:

Show that, the sum of an infinite arithmetic progressive sequence with a positive common difference

is +∞

Step-by-step explanation:

To show that the sum of an infinite arithmetic progressive sequence with a positive common difference is +∞, we can use the formula for the sum of the first n terms of an arithmetic sequence:

Sn = n/2 [2a + (n-1)d]

where a is the first term, d is the common difference, and n is the number of terms in the sequence.

Now, if we let n approach infinity, the sum of the first n terms of the sequence will also approach infinity. This can be seen by looking at the term (n-1)d in the formula, which grows without bound as n becomes larger and larger.

In other words, as we add more and more terms to the sequence, each term gets larger by a fixed amount (the common difference d), and so the sum of the sequence increases without bound. Therefore, the sum of an infinite arithmetic progressive sequence with a positive common difference is +∞.

Answer:

I hope this helps please rate my answer

Step-by-step explanation:

2/5×60

2×12=24

With respect to the average cost curves, the marginal cost curve: intersects both average total cost and average variable cost at their minimum points that is option B.

The fixed cost per unit of production is the average fixed cost (AFC). AFC will reduce consistently as output grows since total fixed costs stay constant. The variable cost per unit of production is known as the average variable cost (AVC). AVC generally declines until it reaches a minimum and then increases due to the growing and then lowering marginal returns to the variable input. The average total cost curve's (ATC) behaviour is determined by the behaviour of the AFC and AVC.

Learn more about Marginal cost curve:

https://brainly.com/question/15570401

#SPJ4

Complete question:

With respect to the average cost curves, the marginal cost curve:

A) Intersects average total cost, average fixed cost, and average variable cost at their minimum point

B) Intersects both average total cost and average variable cost at their minimum points

C) Intersects average total cost where it is increasing and average variable cost where it is decreasing

D) Intersects only average total cost at its minimum point

Answer:

-1/3

Step-by-step explanation:

Answer:

-1/3

Step-by-step explanation:

If an angle of measurement of 140° then; a circle is centered at the vertex of the angle, then the arc subtended by the angle's rays is 0.0233 cm times as long as 1/360th of the circumference of the circle. Also if a circle is centered at the vertex of the angle, and 1/360th of the circumference is 0.06 cm long then length of the arc subtended by the angle's rays 8.4 cm. Another circle is centered at the vertex of the angle then arc subtended by the angle's rays is 70 cm long,Therefore the circumference of the circle is 180 cm.

a.) To find the fraction of the circle's circumference subtended by the angle's rays, we divide the angle measure by 360 degrees:

fraction of circle's circumference = 140/360

Simplifying this fraction, we get:

fraction of circle's circumference = 7/18

To find the length of the arc subtended by the angle's rays, we multiply the fraction of the circle's circumference by the circumference of the circle. Let's call the circumference of the circle "C":

length of arc = (7/18)*C

We're also told that the length of 1/360th of the circumference is equal to 0.06 cm. So, we can write:

(1/360)*C = 0.06

Multiplying both sides by 360, we get:

C = 360*0.06 = 21.6 cm

Now, we can substitute this value of C into the expression for the length of the arc:

length of arc = (7/18)*C

length of arc = (7/18)*(21.6)

length of arc = 8.4 cm (rounded to one decimal place)

Therefore, the length of the arc subtended by the angle's rays is 8.4 cm.

b.) We're given that 1/360th of the circumference of the circle is 0.06 cm long. To find the length of the arc subtended by the angle's rays, we need to multiply 140/360 by 0.06:

length of arc = (140/360)*0.06

length of arc = 0.0233 cm (rounded to four decimal places)

Therefore, the length of the arc subtended by the angle's rays is approximately 0.0233 cm.

c.) We're told that the length of the arc subtended by the angle's rays is 70 cm. To find the circumference of the circle, we need to find the length of 1/360th of the circumference first. We can do this by dividing 70 by 1/360:

(1/360)*C = 70

Multiplying both sides by 360, we get:

C = 70*360 = 25,200 cm

Therefore, the circumference of the circle is 25,200 cm. We can also verify this by dividing the length of the arc by the fraction of the circumference subtended by the angle's rays:

length of arc = (7/18)*C

C = (18/7)*length of arc

C = (18/7)*70

C = 180 cm (rounded to one decimal place)

This is a different value than we got earlier, so we need to check our calculations. It turns out that the previous calculation was incorrect - we made a mistake when multiplying 7/18 by 21.6. The correct calculation gives us:

length of arc = (7/18)*C

length of arc = (7/18)*(21.6)

length of arc = 8.4 cm (rounded to one decimal place)

Now, we can calculate the circumference of the circle:

length of arc = (7/18)C

C = (18/7) *length of arc

C = (18/7) *70

C = 180 cm (rounded to one decimal place)

Therefore, the circumference of the circle is 180 cm.

Also, If an angle of measurement of 140° then; a circle is centered at the vertex of the angle, then the arc subtended by the angle's rays is 0.0233 cm times as long as 1/360th of the circumference of the circle.

b. A circle is centered at the vertex of the angle, and 1/360th of the circumference is 0.06 cm long.The length of the arc subtended by the angle's rays 8.4 cm

c. Another circle is centered at the vertex of the angle.

The arc subtended by the angle's rays is 70 cm long,Therefore the circumference of the circle is 180 cm.

To practice more questions about circumference:

https://brainly.com/question/27447563

#SPJ11

Answer:

1

Step-by-step explanation:

Given values are:

x1 y1=(2,4)

x2 y2=( 4,6)

slop=(6-4)divide (4-2)=1

brainest please

thanks

The 12 months of age) as percentiles of the CDC growth chart reference population.

The most likely description of Sarah's weights (at 3, 6, 9, and 12 months of age) as percentiles of the CDC growth chart reference population is: 85th percentile at 3 months; 85th percentile at 6 months; 90th percentile at 9 months; 95th percentile at 12 months.What is percentile in statistics?In statistics, a percentile is a value below which a specific percentage of observations in a group falls. It is used to split up data into segments that represent an equal proportion of the entire group, resulting in a data set split into 100 equal portions, with each portion representing one percentage point. Sarah's weight is in the 85th percentile at 3 months, 85th percentile at 6 months, 90th percentile at 9 months, and 95th percentile at 12 months is a most likely description of her weights (at 3, 6, 9, and 12 months of age) as percentiles of the CDC growth chart reference population.

Learn more about Percentiles

brainly.com/question/28800128

#SPJ11

If a customer purchases 3 of the products, the probability of getting at least one that is defective is 38.59%.

In order to determine the probability of getting at least one defective product if a customer purchases three products with a defective rate of 7.5%, we can use the concept of complementary probability.

The probability of getting at least one defective product can be calculated as the complement of the probability of getting none defective products.

So, the probability of getting no defective products is:

P(none defective) = (1 - 0.075)³ = 0.6141

Therefore, the probability of getting at least one defective product is:

P(at least one defective) = 1 - P(none defective) = 1 - 0.6141 = 0.3859 or 38.59%

.So, the probability of getting at least one that is defective is 38.59%.

Learn more about probability at

https://brainly.com/question/11234923

#SPJ11

The numbers are as follows, going from lowest to highest:

-4.2, -3.5, -2.1, -1.5, -1, -0.5, 0.5, 3.5, 4.8.

We must compare and organize these numbers from least to greatest in order to put them in numerical order. The two smallest figures, which are -4.2 and -3.5, can be used as a starting point. Afterwards, we add the remaining numbers to the list in ascending order of least to largest after comparing them to these two. We arrive at the list above after continuing this approach.

Visualizing these numbers in order can alternatively be done by using a number line. In the number line, we can mark each number and arrange them in ascending order from left to right. We can see from the number line that the least number is -4.2.

Learn more about number line here:

brainly.com/question/16191404
#SPJ1

Using central limit theorem, the probability that the class of 20 students will have a mean completion time greater than 60 minutes on the unit 5 test is 0.00017332

We can use the Central Limit Theorem (CLT) to approximate the distribution of the sample mean completion time for the class. According to CLT, the distribution of the sample mean is approximately normal, with a mean equal to the population mean and a standard deviation equal to the population standard deviation divided by the square root of the sample size.

In this case, the population mean is given as 48 minutes, the population standard deviation is given as 15 minutes, and the sample size is 20. Therefore, the mean of the sample mean completion time is also 48 minutes, and the standard deviation of the sample mean completion time is 15/√20 ≈ 3.3541 minutes.

To find the probability that the class mean completion time is greater than 60 minutes, we can standardize the distribution of the sample mean completion time using the z-score formula:

z = (x - μ) / (σ / √n)

where x is the value we want to find the probability for (in this case, x = 60), μ is the population mean, σ is the population standard deviation, and n is the sample size.

Plugging in the values, we get:

z = (60 - 48) / (15 / √20) = 3.5777

Using a standard normal distribution table (or calculator), we can find the probability that a z-score is greater than 3.5777.

P = 0.00017332

Learn more on probability here;

https://brainly.com/question/24756209

#SPJ1

Given: ,8^2x= 32^x+3

a: (2³)^2x = (2⁵)^x+3

b: Solving, we get

2^6x = 2^5x+15

Since bases are same, we have

=>6x=5x+15

=> x = 15

(x-bar) refers to the sample means in statistics. It is the average of all the data values in a sample. It is calculated by dividing the sum of all the data values by the sample size.

The distribution of (x-bar) follows a normal distribution, and its expected value is equal to the population mean. The standard error of (x-bar) is calculated by dividing the population standard deviation by the square root of the sample size. It is used to estimate how much the sample mean varies from the population mean.

Sample mean (x-bar) is a statistical concept used to calculate the average of a sample, and standard error is a measure of the variability of the sample mean. The distribution of the sample mean is a normal distribution with a mean equal to the population mean and a standard deviation equal to the population standard deviation divided by the square root of the sample size.

To know more about the "x-bar" in statistics: https://brainly.com/question/29011634

#SPJ11

This procedure is repeated for each interval until the overall frequency of 35 is reached.

A data summary called a frequency distribution displays the frequency, or amount of occurrences, of each value or range of values in a data set. It is frequently displayed as a table or graph, with the values enumerated along one axis and the frequencies of those values listed along the other. The pattern or shape of a data collection can be described using frequency distributions, which can also be used to spot outliers or other unusual values. They can also shed light on the data's central trend and variability.

given

To complete a cumulative frequency table:

Class interval Frequency Cumulative frequency

0-10               5                                   5

10-20       8                                  13

20-30       12                                 25

30-40        7                                 32

40-50         3                                35

Total        35                               35

The number of the first class interval is 5.

For the second interval, we multiply the total frequency of 5 plus the frequency of 8 to get 13.

This procedure is repeated for each interval until the overall frequency of 35 is reached.

To know more about frequency distribution visit:

https://brainly.com/question/14926605

#SPJ1

The missing value in the cumulative table is 36.

The missing value in the cumulative table can be determined by examining the frequencies given in the table. Let's analyze the frequencies step by step:

1. The frequency for scores less than 145 is given as 16.
2. The frequency for scores less than 150 is given as 26.
3. The frequency for scores less than 155 is given as 36.
4. The frequency for scores less than 160 is not explicitly given in the table, but we can determine it by subtracting the frequency for scores less than 155 (36) from the frequency for scores less than 150 (26).

This gives us a value of [tex]26 - 36 = -10.[/tex]

Since a frequency cannot be negative, we can conclude that there is an error in the given table. The cumulative frequency for scores less than 160 should be 36 instead of -10.

Learn more about cumulative table:

https://brainly.com/question/31126348

#SPJ11

Answer:

The following statements about Josiah's solution are true:

He found the proportion of rock songs to the total number of songs correctly: StartFraction 10 over 20 EndFraction = StartFraction x over 1,500 EndFraction.

He solved the proportion correctly: StartFraction 10 times 30 over 20 times 30 EndFraction = StartFraction x over 1,500 EndFraction.

He correctly determined that the number of rock songs on his MP3 player is 300 (x = 300).

Therefore, the statements that are true are:

He found the proportion of rock songs to the total number of songs correctly.

He solved the proportion correctly.

He correctly determined that the number of rock songs on his MP3 player is 300 (x = 300).

The possible widths for the rectangular mural are between 10 and 15 feet. We can also list the number of possible widths within this range, which is six. They are 10 feet, 11 feet, 12 feet, 13 feet, 14 feet, and 15 feet.

To determine the possible widths for the rectangular mural with an area of 60 square feet, we can use the formula for the area of a rectangle, which is length multiplied by width. Since the area is given as 60 square feet and the length should be between 4 and 6 feet, we can set up inequality as follows:

4w ≤ 60 ≤ 6w

where w is the width of the mural in feet. Solving this inequality for w, we get:

10 ≤ w ≤ 15

It is important to consider the dimensions carefully to ensure that the mural meets the requirements and fits in the desired space. By having multiple possible widths, the class can select the most suitable one based on the available resources and space.

To learn more about rectangular murals

https://brainly.com/question/27846716

#SPJ4

Complete question:

Our class is planning to paint a rectangular mural with an area of 60 square feet, it should be at least 4 feet high but not more than 6 feet in length and width, and list a number of possible widths for our class. Planning to paint a rectangular mural with an area of 60 square feet, it should be at least 4 feet high but not more than 6 feet in length and width, and list the number of possible widths for it.

The calculated value of x in the similar triangles is 14 and it is calculated from the ratio 10 : x = 20 : 28

Given the triangle

The triangle is a superset of similar triangles

So, we have the following equivalent ratio that can be used to determine teh value of x

The set up of teh ratio is

10 : x = 10 + 10 : 28

Evaluating the like terms, we get

10 : x = 20 : 28

So, we have

x/10 = 28/20

Multiply both sides by 10

x = 14

Hence, the value of x is 14

Read more about similar triangles at

https://brainly.com/question/14285697

#SPJ1

The number of bicycles they need to sell to make equal money is 5. The amount they would make is $500.

In contrast to variable costs, which change depending on the volume of production or sales, fixed costs are expenses that remain constant. Rent, insurance, and salary are examples of fixed costs that are constant regardless of the volume of output or sales. Materials, labour, and shipping expenses are examples of variable costs that change according to the volume of output or sales.

Let us suppose the number of bicycle sold = x.

Then the equation for Jimmy is:

$250 + 50x

The equation for Tom is:

$400 + 20x

To make the same amount we equate the two equations as follows:

250 + 50x = 400 + 20x

30x = 150

x = 5

Substituting the value of x in equation 1 we have:

J = 250 + 50(5)

J = 250 + 250

J = 500

Hence, the number of bicycles they need to sell to make equal money is 5. The amount they would make is $500.

Learn more about equation here:

https://brainly.com/question/30695173

#SPJ1

To prepare a buffer solution with a given pH, we need to choose a weak acid and its conjugate base, such that the pKa of the weak acid is close to the desired pH.

The pKa is related to the Ka value as follows:

pKa = -log(Ka)

So, for each of the weak acids given, we can calculate the pKa:

Phosphoric acid (H3PO4): Ka = 7.5 x 10^-3, so pKa = -log(7.5 x 10^-3) = 2.12

Acetic acid (CH3COOH): Ka = 1.8 x 10^-5, so pKa = -log(1.8 x 10^-5) = 4.74

Formic acid (HCOOH): Ka = 1.8 x 10^-4, so pKa = -log(1.8 x 10^-4) = 3.74

Now, let's consider the desired pH values and choose the best components for buffer solutions:

For a pH of 2.5, the best choice would be phosphoric acid (pKa = 2.12).

For a pH of 4.5, the best choice would be formic acid (pKa = 3.74) or a mixture of acetic acid and acetate ion (CH3COOH/CH3COO-, pKa = 4.76).

For a pH of 6.5, the best choice would be a mixture of acetic acid and acetate ion (CH3COOH/CH3COO-, pKa = 4.76).

Note that a buffer solution can be prepared by mixing a weak acid and its conjugate base in roughly equal amounts, so the appropriate salt can be added to the acid to form the buffer solution. For example, to prepare an acetate buffer, one could mix acetic acid with sodium acetate.

Learn more about buffer solutions visit:

https://brainly.com/question/13169083

#SPJ11

The following equation can be used to represent the sentence:

7 + (x/4) = 5 where x stands for a number.

A straight line on a graph is represented by a linear equation. It has a constant slope and y-intercept, one or more variables, typically expressed by x and y. Several different real-world situations can be represented by linear equations, such as estimating the cost of goods based on the quantity purchased or calculating a car's distance traveled based on speed and time. Finding the value of the variable that causes the equation to be true is the first step in solving a linear equation. In mathematics, science, engineering, and economics, linear equations are frequently employed.

Learn more about linear equation here:

brainly.com/question/11897796

#SPJ1

Answer:

Step-by-step explanation:

71/8*9 which it 639/8 feet long

The solutions to the equation are x = -4 and x = 1.

The quadratic formula, which is often employed in the disciplines of mathematics, physics, engineering, and other sciences, is a potent tool for resolving quadratic problems. We must first get the values of a, b, and c from the quadratic equation in order to apply the quadratic formula. To get the answers for x, we then enter these values as substitutes in the formula and simplify.

The given equation is 4x² + 6x - 13 = 3x².

Rearranging the equation we have:

x² + 6x - 13 = 0

The quadratic formula is given as:

x = (-b ± √(b² - 4ac)) / 2a

Substituting the values of a = 1, b = 6, and c = -13.

x = (-6 ± √(6² - 4(1)(-13))) / 2(1)

x = (-6 ± √(100)) / 2

x = (-6 ± 10) / 2

x = -8/2 or x = 2/2

x = -4 or x = 1

Hence, the solutions to the equation are x = -4 and x = 1

Learn more about quadratic formula here:

https://brainly.com/question/2615966

#SPJ1

Answer:

A random sample of size 64 is used to test the null hypothesis that for certain age group the mean score on an achievement test is less than or equal to 40 against the alternative that it is greater than 40. The scores are assumed to be normally distributed with variance 0? 256 _ Consider the hypotheses Ha: L <40 versus HA Lt > 40 and suppose the null hypothesis is to be rejected if and only if the sample mean X exceeds 43.5. What is the size of this test? Compute the probability of type Il error at L = 42

Step-by-step explanation: