Answer:
Critical path
Explanation:
Project
This is simply known as a temporary work with a clearly state out timeframe or timeline from its starting (beginning) to the ending. it often brings about a unique product, service, or event. The various tasks in a project is specific to the defined project goal or objective and can be described within limits of time.
Critical path
This is simply regarded as the longest path via a network diagram, that shows the shortest amount of time by when project can or should be completed. the critical path method commonly called CPM is broken down into:
Earliest start time (ES) - This is simply the fastest or earliest a said activity can start without starting before any formal activities.
Earliest finish time (EF) - This is how fast or earliest an activity can finish.
Latest start time (LS) - This is simply known as the latest time an activity can start without delaying the entire project.
Latest finish time (LF) - This is simply the latest time an activity can finish without delaying the entire project.
Critical Path Analysis is a known project management tool that lets out all the individual activities that make up a larger project and it often shows the order in which activities have to be undertaken etc,
ccording to the fractional reserve theory of banking (money multiplier model), if the central bank simultaneously reduces both the discount rate and the statutory required reserve ratio applied to commercial banks, then the money supply will
Answer:
INCREASE
Explanation:
Reducing discount rate and required reserve ratio are examples of expansionary monetary policies
Expansionary monetary policy : these are polices taken in order to increase money supply. When money supply increases, aggregate demand increases. reducing interest rate and open market purchase are ways of carrying out expansionary monetary policy
When the required reserve is reduced, the amount of loans that a bank can give increases and this increases money supply.
If discount rate is reduced, it becomes cheaper for commercial banks to borrow money. this increases money supply
Mr. Josh Kenney, a U.S. citizen and resident of Vermont, owns 100 percent of the stock of JK Services, which is incorporated under Vermont law and conducts business in four counties in the state. JK Services owns 100 percent of the stock of JK Realty, which is incorporated under Massachusetts law and conducts business in Boston.
a. How many taxpayers are identified in the given statement of facts?
b. Identify the governments with jurisdiction to tax each of these taxpayers.
Answer:
a. Taxpayers in the scenario:
There are three (3) taxpayers and these are:
Mr. Josh Kenny JK ServicesJK Realtyb. Governments with jurisdiction:
Mr. Josh Kenny falls under the State of Vermont where he is a resident. JK Services falls under the State of Vermont where it is incorporated and operates.JK Realty falls under the City of Boston where it is operates.MC Qu. 147 Luker Corporation uses a process... Luker Corporation uses a process costing system. The company had $165,500 of beginning Finished Goods Inventory on October 1. It transferred in $842,000 of units completed during the period. The ending Finished Goods Inventory balance on October 31 was $163,200. The entry to account for the cost of goods manufactured during October is:
Answer:
Debit cost of goods sold $844,300
Credit finished goods inventory $844,300
Explanation:
Based on the information given The Appropriate journal entry to account for the cost of goods manufactured during October is:
Debit cost of goods sold $844,300
Credit finished goods inventory $844,300
($165,500 + $842,000 - $163,200 = $844,300)
(To record cost of goods manufactured)
For March, sales revenue is $1,000,000, sales commissions are 5% of sales, the sales manager's salary is $80,000, advertising expenses are $65,000, shipping expenses total 1% of sales, and miscellaneous selling expenses are $2,100 plus 1% of sales. Total selling expenses for the month of March are
Answer:
$217,100
Explanation:
total selling expenses = sales commission + sales manager's salary + shipping expense + advertising expenses + miscellaneous selling expenses
sales commissions = 50,000
advertising expenses = 65,000
shipping expenses = 10,000
sales manager's salary= 80,000
miscellaneous selling expenses = 10,000 + 2100
Goode Company has the following production data for selected months.
Ending Work in Process
Month Beginning Work in Process Units Transferred Out Units % Complete as to Conversion Cost
January 0 39,400 10,200 44%
March 0 44,100 8,600 72
July 0 47,100 21,800 22
Compute equivalent units of production for materials and conversion costs, assuming materials are entered at the beginning of the process
Materials Conversion Costs
January 49,600
March 52,700
July 68,900
Answer:
Goode Company
Equivalent units of production for materials and conversion costs:
Materials Conversion Costs
January 49,600 43,888
March 52,700 50,292
July 68,900 51,896
Explanation:
a) Data and Calculations:
Ending Work in Process
Month Beginning Units Transferred Out Units % Complete as to
Work in Process Conversion Cost
January 0 39,400 10,200 44%
March 0 44,100 8,600 72
July 0 47,100 21,800 22
January: Units Materials Conversion
Beginning work in process 0
Units transferred out 39,400 39,400 (100%) 39,400 (100%)
Ending work in process 10,200 10,200 (100%) 4,488 (44%)
Equivalent units 49,600 43,888
March:
Beginning work in process 0
Units transferred out 44,100 44,100 (100%) 44,100 (100%)
Ending work in process 8,600 8,600 (100%) 6,192 (72%)
Equivalent units 52,700 50,292
July:
Beginning work in process 0
Units transferred out 47,100 47,100 (100%) 47,100 (100%)
Ending work in process 21,800 21,800 (100%) 4,796 (22%)
Equivalent units 68,900 51,896
Which method requires first estimating the desired amount for the Allowance for Doubtful Accounts and then determining the amount of the expense required to get to this desired balance given the amount of the unadjusted balance
Answer:
Aging of accounts receivable method
Explanation:
Accounts Receivable
This is simply refered to as the right to receive cash in future terms from customers for goods sold or for services performed.
Aging of accounts receivable method
In this method, finding out the means of accounting for bad debts expense in which the aging of accounts receivable schedule which is a list of accounts receivable according to length of time outstanding is usually used to estimate the total amount of bad debts.
It is also defined as the method of estimating uncollectible receivables by finding out the balance of Allowance for Bad Debts account based on the age of individual accounts receivable.
MC Qu. 119 Alexis Co. reported the following information... Alexis Co. reported the following information for May: Part A Units sold 5,800units Selling price per unit$950 Variable manufacturing cost per unit 600 Sales commission per unit - Part A 95 What is the contribution margin for Part A
Answer:
the contribution margin per unit for part A is $1,479,000
Explanation:
The computation of the contribution margin for part A is shown below:
Contribution margin per unit is
= $950 - $600 - $95
= $255
Now for contribution margin per unit for part A is
= 5,800 units × $255
= $1,479,000
Hence, the contribution margin per unit for part A is $1,479,000
Radford Inc. manufactures a sugar product by a continuous process, involving three production departments—Refining, Sifting, and Packing. Assume that records indicate that direct materials, direct labor, and applied factory overhead for the first department, Refining, were $386,100, $135,100, and $88,800, respectively. Also, work in process in the Refining Department at the beginning of the period totaled $21,600, and work in process at the end of the period totaled $26,600.
a. Journalize the entries to record the flow of costs into the Refining Department during the period for (1) direct materials, (2) direct labor, and (3) factory overhead. .
b. Journalize the entry to record the transfer of production costs to the second department, Sifting.
Answer:
a. S/n Account Titles Debit Credit
1 Work in progress - Refining Department $386,100
Material $386,100
2 Work in progress - Refining Department $135,100
Wages Payable $135,100
3 Work in progress - Refining Department $88,800
Factory Overhead-Refining Department $88,800
b. Cost of Transfer = Opening WIP cost + Material + wages + Factory Overhead - Closing WIP Cost
Cost of Transfer = 21,600 + 386,100 + 135,100 + 88,800 - 26,600
Cost of Transfer = $605,000
Date Account Titles Debit Credit
Work in progress - Shifting Department $605,000
Work in progress - Refining Department $605,000
if a trial balance totals do not agree, the difference must be entered in a. nominal account b. the profit and loss account C. the capital account d. the suspense account
Answer:
d. the suspense account
Explanation:
Financial accounting is an accounting technique used for analyzing, summarizing and reporting of financial transactions like sales costs, purchase costs, payables and receivables of an organization using standard financial guidelines such as Generally Accepted Accounting Principles (GAAP).
Financial statements can be defined as a document used for the formal communication or disclosure of financial information and statements to present and potential users such as investors and creditors. These includes balance sheet, statement of retained earnings and income statement.
In Financial accounting, if a trial balance totals do not agree, the difference must be entered in the suspense account
Is scented candle harmful to dogs?
Answer:
Scented candles are not harmful to dogs for normal use, but high concentrations in a confined space for a long time would have an impact on the dog's sense of smell.
Because the candles you use will cause a lot of burnt smoke which is harmful to dogs. And aromatherapy ingredients contain a lot of chemical substances. If the windows are opened, it will be ok, if not the more chemical substances accumulate, the more it will be harmful to dogs, or even to the health of people.
Here are several ways to avoid the harm caused by aromatherapy to dogs:
Do not ignite the two types of aromatherapy in a short time or at the same time, to avoid the two types of aromatherapy, which are mutually ineffective and produce toxic gas.
Try not to light candles in a closed bedroom when you sleep.
Keep air circulation.
Keep all kinds of aromatherapy out of reach of dogs.
Use Home Lights scented candles in the right way.
Explanation:
https://hlcandles.com/
The two most important goals for government policy involve a trade-off between __________ and __________. A. big government; small government. B. taxation; government spending. C. direct regulation; indirect regulation. D. equity; efficiency.
Answer:
D
Explanation:
If the ABC Company has three lots of products for sale, purchase 1 (earliest) for $20, purchase 2 (middle) for $15 and purchase 3 (latest) for $25, which cost would be assumed to be sold first using FIFO costing
Answer:
Results are below.
Explanation:
Giving the following information:
Purchase 1 (earliest) for $20
Purchase 2 (middle) for $15
Purchase 3 (latest) for $25
The FIFO (first-in, first-out) method, allocates costs to the cost of goods sold using the purchase price of the firsts units incorporated into inventory. On the contrary, the ending inventory cost is calculated with the costs of the lasts units incorporated.
Assume that the company sells the number of units equivalent to the first lot. Then, the cost of goods sold will be $20; and the ending inventory $40 (15+25).
Investing $2,000,000 in TQM's Channel Support Systems initiative will at a minimum increase demand for your products 3.0% in this and in all future rounds. Looking at the Round 0 Inquirer for Andrews, last year's sales were $163,189,230. Assuming similar sales next year, the 3.0% increase in demand will provide $4,895,677 of additional revenue. With the overall contribution margin of 34.1%, after direct costs this revenue will add $1,669,426 to the bottom line. For simplicity, assume that the demand increase and margins will remain at last year's levels. How long will it take to achieve payback on the initial $2,000,000 TQM investment, rounded to the nearest
Answer:
the payback period is 14 months
Explanation:
The computation of the payback period is shown below:
Profit is
= $2,000,000 - $1,669,426
= $330,574
Now payback period is
= 1 + $330,574 ÷ $1,669,426
= 1 +0.198 years
= 1.198 years
= 14.37 months
= 14 months
Hence, the payback period is 14 months
The following information was available for Pina Colada Corp. at December 31, 2022:
Beginning inventory $93000
Ending inventory $64000
Cost of goods sold $763805
Sales $1040000.
Pina days inventory turnover ratio in 2022 was: ___________
Answer:
37.51 days
Explanation:
Use the following formula to calculate the Inventory Turnover ratio
Inventory Turnover ratio = Cost of goods sold / Average Inventory
Where
Cost of goods sold = $763,805
Average Inventory = ( Beginning Inventory + Ending Inventory ) / 2 = ( $93,000 + $64,000 ) / 2 = $78,500
Placing values in the formula
Inventory Turnover ratio = $763,805 / $78,500
Inventory Turnover ratio = 9.73
Inventory Days = Numbers of days in a year / Inventory Turnover ratio = 365 / 9.73 = 37.51 days
The country of Bolivia had a Gross Domestic Product of $79 billion in 2016 and a population of 11 million people, the GDP per capita would be ________.
Answer:
The GDP per capita of country of Bolivia would be $7,181.82.
Explanation:
GDP Per capita refers to a measure that calculates a country's economic output per person by dividing its GDP by its population.
Therefore, we have:
GDP per capita = GDP / Population = $79 billion / 11 million = $79,000,000,000 / $11,000,000 = $7,181.82
Therefore, the GDP per capita of country of Bolivia would be $7,181.82.
Tercer reports the following for one of its products. Direct materials standard (4 lbs. $2 per lb.) Actual direct materials used (AQ) Actual finished units produced Actual cost of direct materials used $8 per finished unit 300,000 lbs. 60,000 units $535,000 AQ Actual Quantity SQ Standard Quantity AP Actual Price SP Standard Price.
Compute the direct materials price and quantity variances and classify each as favorable or unfavorable.
Answer:
Results are below.
Explanation:
Giving the following information:
Direct materials standard (4 lbs. $2 per lb.)= $8 per finished unit
Actual direct materials used (AQ)= 300,000
Actual finished units produced= 60,000
Actual cost of direct materials used= $535,000
To calculate the direct material price and quantity variance, we need to use the following formulas:
Direct material price variance= (standard price - actual price)*actual quantity
Direct material price variance= (2 - 1.783)*300,000
Direct material price variance= $65,100 favorable
Actual price= 535,000 / 300,000= $1.783
Direct material quantity variance= (standard quantity - actual quantity)*standard price
Direct material quantity variance= (4*60,000 - 300,000)*2
Direct material quantity variance= $120,000 unfavorable
Oceanic, a venture capital firm, has the opportunity to invest in one of two firms that are in the process of globalizing. Macmillan, an air-conditioner manufacturer, faces intense pressure from its home market. Rent a Swag, a dog-toy manufacturer, has encountered little competition in its country of origin. In which company should Oceanic invest?
a. Macmillan, because air conditioners cost more to ship than dog toys do
b. Macmillan, because firms that face stiff competition at home tend to do better abroad
c. Rent a Swag, because firms that face little or no competition at home tend to do better abroad
d. Rent a Swag, because dog toys cost less to ship than air conditioners do
Answer: B. Macmillan, because firms that face stiff competition at home tend to do better abroad
Explanation:
Following the information given, it can be deduced that Oceanic should invest in Macmillan, because firms that face stiff competition at home tend to do better abroad.
The fact that Macmillan, which is an air-conditioner manufacturer, faces intense pressure from its home market will have resulted in the company making quality sure conditioners in order to sustain the pressure and have an edge over its local competitors. Therefore, the company will do better abroad as a result of this.
The correct option is B.
If the direct write-off method of accounting for uncollectible receivables is used, what general ledger account is credited when a customer's account is written off as uncollectible
Answer: Accounts Receivable account
Explanation:
Normally, when writing off a bad debt, an allowance for doubtful debts account is created from which the bad debts can be written off. However, some use the direct method of writing off accounts receivable.
The direct method involves removing the bad debt from the Accounts receivable when it happens by crediting the Accounts Receivable account to reduce it and debiting the Bad Debt expense account.
odson Company manufactures a product with a standard direct labor cost of 2.3 hours of labor per unit at $10.60 per hour. Last month, 170 units were produced using 90 hours at $11.60 per hour. What was the company's labor quantity variance
Answer:
Direct labor time (efficiency) variance= $3,190.6 favorable
Explanation:
To calculate the direct labor quantity variance, we need to use the following formula:
Direct labor time (efficiency) variance= (Standard Quantity - Actual Quantity)*standard rate
Direct labor time (efficiency) variance= (391 - 90)*10.6
Direct labor time (efficiency) variance= $3,190.6 favorable
Standard quantity= 2.3*170= 391
Starbucks' capital structure has been restructured from a primarily equity-financed company to a primarily debt-financed company, for example, via share repurchases, in order to leverage returns to investors.A. Yes.B. No.
Answer:
Starbucks
Starbucks' Capital Structure
Restructured from a primarily equity-financed company to a primarily debt-financed company:
A. Yes.
Explanation:
Starbucks' assets are more than 60% financed by long-term debts, with less than 40% financed by equity. The advantage of having a higher debt leverage is to optimize the returns to the stockholders. This is because interest expenses arising from the debts are tax-deductible. The ROE (return on equity) is always higher for a debt-leveraged firm than an equity-financed firm because more of the net income will be available for distribution to stockholders, given the tax benefits of having more debts.
One of your friends has opened a new wholesale electronics business and wants your help figuring out some inventory issues they are facing.
One night last week, there seemed to be fewer HD televisions in the warehouse than they expected. The last time they were in the warehouse was
a week earlier, and they hadn't noticed anything amiss.
As they looked around, they saw that the evening warehouse worker was filling the last orders of the day. The delivery driver and day warehouse
worker were gone for the day, and the delivery van keys were on the desk that the warehouse workers shared. The doors to the loading dock were
open, as was the door to the office area where the accountant, two customer service specialists, and the owner worked.
Knowing that you are familiar with accounting principles, they asked for your help in figuring out how to prevent this in the future.
Answer:
Hence,
When control is missing the wrongdoings happen at a quick pace because the barrier in their work involves an end. there's no check on the operations and hence many wrongdoings happen without coming into the eyes of management. control helps within the analysis of wrongdoings by comparing with the standards and checks. Hence without control, it's hard to depict the extent of wrongdoings within the organization.
Explanation:
Role of control
Internal controls are policies and procedures put in situ by management to make sure that, among other things, the company’s financial statements are reliable. Some internal controls relevant to an audit include bank reconciliations, password control systems for accounting software, and inventory observations.
Internal controls provide reasonable assurance about achieving objectives regarding:
.Effectiveness and efficiency of operations
.Reliability of financial reporting
.Safeguarding of assets
.Compliance with applicable laws and regulations
Selected accounts with a credit amount omitted are as follows: Work in Process Apr. 1 Balance 7,500 Apr. 30 Goods finished X 30 Direct materials 60,000 30 Direct labor 191,000 30 Factory overhead 57,300 Finished Goods Apr. 1 Balance 13,500 30 Goods finished 307,300 What was the balance of Work in Process as of April 30? a.$307,300 b.$13,500 c.$57,300 d.$8,500
Answer:
the balance in work in process in april 30 is $8,200
Explanation:
The computation of the balance in work in process in april 30 is as follows:
Balance of Work in Process as of April 30 is
= Apr 1 Balance + Direct material + direct labor + overhead - goods finished
= $7,500 + $60,000 + $191,000 + $57,000 - $307,300
= $8,200
Hence, the balance in work in process in april 30 is $8,200
This is the answer but the same is not provided in the given options
In the manufacture of 9,200 units of a product, direct materials cost incurred was $171,600, direct labor cost incurred was $114,200, and applied factory overhead was $45,400. What is the total conversion cost? a.$171,600 b.$331,200 c.$159,600 d.$45,400
Answer: c. $159,600
Explanation:
Conversion cost is the cost that the business incurs to transform raw materials into finished goods or at least the next stage of the good.
Direct labor is necessary to transform the good and they do so using factory overheads. Conversion cost is therefore calculated as follows:
= Direct Labor Cost + Factory overhead
= 114,200 + 45,400
= $159,600
MC Qu. 157 Current information for the... Current information for the Healey Company follows: Beginning raw materials inventory $ 16,100 Raw material purchases 69,000 Ending raw materials inventory 17,500 Beginning work in process inventory 23,300 Ending work in process inventory 28,900 Direct labor 47,300 Total factory overhead 30,900 All raw materials used were traceable to specific units of product. Healey Company's total manufacturing costs for the year are:
Answer:
$145,800
Explanation:
Calculation to determine what Healey Company's total manufacturing costs for the year are:
TOTAL MANUFACTURING COSTS
Beginning raw materials inventory $ 16,100
Add Raw material purchases $69,000
Less Ending raw materials inventory $17,500
Add Direct labor $47,300
Add Total factory overhead $30,900
Total manufacturing costs $145,800
Therefore Bealey Company's total manufacturing costs for the year are:$145,800
Valley Technology Balance Sheet As of January 24, 2021 (amounts in thousands)
Cash 9,700 Accounts Payable 1,500
Accounts Receivable 4,500 Debt 2,900
Inventory 3,800 Other Liabilities 800
Property Plant & Equipment 16,400 Total Liabilities 5,200
Other Assets 1,700 Paid-In Capital 7,300
Retained Earnings 23,600
Total Equity 30,900
Total Assets 36,100 Total Liabilities & Equity 36,100
Record the transactions in a journal, transfer the journal entries to T-accounts, compute closing amounts for the T-accounts, and construct a balance sheet to answer the question.
Jan 25. Sell product for $30,000 in cash with historical cost of $24,000
Jan 26. Sell, deliver, and receive payment of $40,000 for service
Jan 27. Consume good or service and pay expense of $2,000
What is the final amount in Total Liabilities & Equity?
Answer:
Valley Technology
1. Journal Entries:
Jan 25. Debit Cash $30,000
Credit Sales Revenue $30,000
To record the sale of goods for cash.
Debit Cost of goods sold $24,000
Credit Inventory $24,000
To record the cost of goods sold.
Jan 26. Debit Cash $40,000
Credit Service Revenue $40,000
To record the rendering of services for cash.
Jan 27. Debit Expenses $2,000
Credit Cash $2,000
To record the payment for good or service consumed.
2. T-accounts:
Cash
Date Account Titles Debit Credit
Jan. 24 Beginning balance 9,700
Jan 25. Sales Revenue 30
Jan 26. Service Revenue 40
Jan 27. Expenses 2
Jan. 31 Ending balance 9,768
Inventory
Date Account Titles Debit Credit
Beginning balance 3,800
Cost of goods sold 24
Ending balance 3,776
Sales Revenue
Date Account Titles Debit Credit
Cash $30
Service Revenue
Date Account Titles Debit Credit
Cash $40
Cost of goods sold
Date Account Titles Debit Credit
Inventory $24
Expenses
Date Account Titles Debit Credit
Cash $2
3. Balance Sheet As of January 31, 2021 (amounts in thousands)
Cash 9,768 Accounts Payable 1,500
Accounts Receivable 4,500 Debt 2,900
Inventory 3,776 Other Liabilities 800
Property Plant & Equipment 16,400 Total Liabilities 5,200
Other Assets 1,700 Paid-In Capital 7,300
Retained Earnings 23,644
Total Equity 30,944
Total Assets 36,144 Total Liabilities & Equity 36,144
4. The final amount in Total liabilities and equity is:
= $36,144
Explanation:
a) Data and Calculations:
Balance Sheet As of January 24, 2021 (amounts in thousands)
Cash 9,700 Accounts Payable 1,500
Accounts Receivable 4,500 Debt 2,900
Inventory 3,800 Other Liabilities 800
Property Plant & Equipment 16,400 Total Liabilities 5,200
Other Assets 1,700 Paid-In Capital 7,300
Retained Earnings 23,600
Total Equity 30,900
Total Assets 36,100 Total Liabilities & Equity 36,100
Analysis:
Jan 25. Cash $30,000 Sales Revenue $30,000
Cost of goods sold $24,000 Inventory $24,000
Jan 26. Cash $40,000 Service Revenue $40,000
Jan 27. Expenses $2,000 Cash $2,000
Revenue:
Sales revenue $30
Cost of goods sold (24)
Service revenue 40
Gross profit $46
Expenses 2
Net income $44
Retained Earnings, beginning $23,600
Net income 44
Retained Earnings,, ending $23,644
Job-Order Costing versus Process Costing Required: Identify each of the following types of businesses as either job-order or process costing. a. Hospital services b. Custom cabinet making c. Toy manufacturing d. Soft-drink bottling e. Airplane manufacturing (e.g., 767s) f. Personal computer assembly g. Furniture making (e.g., computer desks sold at discount stores) h. Custom furniture making i. Dental services j. Paper manufacturing k. Nut and bolt manufacturing l. Auto repair m. Architectural services n. Landscape design services o. Flashlight manufacturing
Answer:
Job-Order Costing versus Process Costing
Types of businesses using job order costing:
a. Hospital services
b. Custom cabinet making
e. Airplane manufacturing (e.g., 767s)
h. Custom furniture making
i. Dental services
l. Auto repair
m. Architectural services
n. Landscape design services
Types of businesses using processing costing:
c. Toy manufacturing
d. Soft-drink bottling
f. Personal computer assembly
g. Furniture making (e.g., computer desks sold at discount stores)
j. Paper manufacturing
k. Nut and bolt manufacturing
o. Flashlight manufacturing
Explanation:
In job order costing, the manufacturer tracks its prime costs to individual products or jobs. This means that the costs of each job can be computed separately because costs are traced to each job. Under process costing, the prime costs are tracked to the department, process or batch, and not to individual products or jobs.
XYZ Company provides the following activity-based costing information: Activities Total Costs Activity-cost drivers Account inquiry $320,000 16,000 hours Account billing $160,000 3,200,000 lines Account verification costs $138,600 60,000 accounts Correspondence letters $19,200 4,000 letters Total costs $637,800 The above activities are used by Product A and B as follows: Product A Product B Account inquiry hours 2,700 hours 1,800 hours Account billing lines 820,000 lines 630,000 lines Account verification accounts 23,000 accounts 24,000 accounts Correspondence letters 1,500 letters 2,000 letters How much of the account verification costs will be assigned to Product B
Answer:
XYZ Company
Account verification costs assigned to Product B are:
= $55,400.
Explanation:
a) Data and Calculations:
Activities Total Costs Activity-cost drivers Activity Rates
Account inquiry $320,000 16,000 hours $20 per hour
Account billing $160,000 3,200,000 lines $0.05 per line
Account verification costs $138,600 60,000 accounts $2.31 per account
Correspondence letters $19,200 4,000 letters $4.80 per letter
Total costs $637,800
Usage by Products
Product A Product B
Account inquiry hours 2,700 hours 1,800 hours
Account billing lines 820,000 lines 630,000 lines
Account verification 23,000 accounts 24,000 accounts
Correspondence letters 1,500 letters 2,000 letters
Costs assigned to Product B
Account inquiry $36,000 (1,800 * $20)
Account billing $31,500 (630,000 * $0.05)
Account verification $55,400 (24,000 * $2.31)
Correspondence letters $9,600 (2,000 * $4.80)
Total costs assigned $132,500
2018
Feb. 2 Recorded credit sales of $97,000. Ignore Cost of Goods Sold.
Nov. 1 Loaned $18,000 to Jess Price, an executive with the company, on a one-year, 7% note.
Dec. 31 Accrued interest revenue on the Price note. 2019
Nov. 1 Collected the maturity value of the Price note.
Required:
Journalize the entries.
Answer:
Feb 6
Dr Account receivable $97,000
Cr Sales revenue $97,000
Jul 1
Dr Notes receivable $18,000
Cr Cash $18,000
Dec 31
Dr Interest receivable $630
Cr Interest revenue $630
July 1
Dr Cash $19,260
Cr Notes receivable $18,000
Cr Interest receivable $630
Cr Interest revenue $630
(To record collection)
Explanation:
Preparation of the journal entries
Feb 6
Dr Account receivable $97,000
Cr Sales revenue $97,000
(To credit sales)
Jul 1
Dr Notes receivable $18,000
Cr Cash $18,000
(To record loan given)
Dec 31
Dr Interest receivable ($18000*7%*6/12) $630
Cr Interest revenue $630
(To record accrued interest)
July 1
Dr Cash $19,260
($18,000+$630+630)
Cr Notes receivable $18,000
Cr Interest receivable $630
Cr Interest revenue $630
(To record collection)
A small business owner visits his bank to ask for a loan. The owner states that she can repay a loan at $1,500 per month for the next 3 years and then $500 per month for three years after that. If the bank is charging customers 10 percent APR, how much would it be willing to lend the business owner?
Answer:
The bank will be willing to lend $ 28,800 to the business owner.
Explanation:
Given that a small business owner visits his bank to ask for a loan, and the owner states that she can repay a loan at $ 1,500 per month for the next 3 years and then $ 500 per month for three years after that, since the bank is charging customers 10 percent APR, to determine how much the business owner would be willing to lend the following calculation must be performed:
1500 x 12 x 3 + 500 x 12 x 3 = X
18000 x 3 + 6000 x 3 = X
54000 + 18000 = X
72000 = X
10 x 6 = 60
100 - 60 = 40
100 = 72000
40 = X
40 x 72000/100 = X
28800 = X
Therefore, the bank will be willing to lend $ 28,800 to the business owner.
Hettrick International Corporation's only product sells for $120.00 per unit and its variable expense is $52.80. The company's monthly fixed expense is $396,480 per month. The unit sales to attain the company's monthly target profit of $13,000 is closest to
Answer:
Number of units to be sold= 6,093
Explanation:
Giving the following information:
Selling price= $120
Unitary variable cost= $52.8
Fixed cost= $396,480
Desired profit= $13,000
To calculate the number of units to obtain the desired profit, we need to use the following formula:
Break-even point in units= (fixed costs + desired profit) / contribution margin per unit
Break-even point in units= (396,480 + 13,000) / (120 - 52.8)
Break-even point in units= 6,093.4 = 6,093
