Answer:
13.759 % of the initial mechanical energy is lost as thermal energy.
Explanation:
By the First Law of Thermodynamics we know that increase in internal energy of the object ([tex]U[/tex]), in joules, is equal to the lost amount of the change in gravitational potential energy ([tex]U_{g}[/tex]), in joules:
[tex]\frac{x}{100} \cdot \Delta U_{g} = \Delta U[/tex] (1)
Where [tex]x[/tex] is the percentage of the energy loss, no unit.
By definition of the gravitational potential energy and internal energy, we expand this equation:
[tex]\frac{x\cdot m \cdot g \cdot h}{100} = m\cdot c\cdot \Delta T[/tex] (1b)
Where:
[tex]m[/tex] - Mass of the object, in kilograms.
[tex]g[/tex] - Gravitational acceleration, in meters per square second.
[tex]h[/tex] - Initial height of the object above the lunar ground, in meters.
[tex]c[/tex] - Specific heat of aluminium, in joules per degree Celsius-kilogram.
[tex]\Delta T[/tex] - Temperature increase due to collision, in degree Celsius.
If we know that [tex]m = 0.95\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]h = 75\,m[/tex], [tex]c = 920\,\frac{J}{kg\cdot ^{\circ}C}[/tex] and [tex]\Delta T = 0.11\,^{\circ}C[/tex], then the percentage of energy loss due to collision is:
[tex]x = \frac{100\cdot c\cdot \Delta T}{g\cdot h}[/tex]
[tex]x = \frac{100\cdot \left(920\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (0.11\,^{\circ}C)}{\left(9.807\,\frac{m}{s^{2}} \right)\cdot (75\,m)}[/tex]
[tex]x = 13.759\,\%[/tex]
13.759 % of the initial mechanical energy is lost as thermal energy.
4. When setting goals, you should do everything EXCEPT which of the following?
Take into account your current level of activity.
Ask all of your friends what they think your goals should be..
Set a time limit.
Be realistic.
this is physics practical
Answer:
well done buddy
Explanation:
Using your Periodic Table, which of the elements below is most likely to be a solid at room temperature?
A.) potassium, B.) Hydrogen, C.) Neon, D.) Chlorine
The answer is definitely Potassium
Why are road accidents at high speeds very much worse than road accidents at low speeds?
Answer:
The momentum makes it worse.
Explanation:
The momentum of vehicles running at faster speeds is very high and causes a lot of damage to the vehicles.
A skipper on a boat notices wave crests passing his anchor chain every 5.6 s . He estimates the distance between wave crests to be 16 m . He also correctly estimates the speed of the waves. Find this speed.
Answer:
v = 2.85 m/s
Explanation:
Given that,
A skipper on a boat notices wave crests passing his anchor chain every 5.6 s.
The distance between wave crests to be 16 m.
We need to find the speed of the waves. The speed of a wave can be calculated by the formula as follows :
[tex]v=f\lambda\\\\v=\dfrac{\lambda}{T}\\\\v=\dfrac{16}{5.6}\\\\v=2.85\ m/s[/tex]
So, the speed of the wave is 2.85 m/s.
can anyone help me to explain theory of relativity???
Answer:
The theory of relativity usually encompasses two interrelated theories by Albert Einstein: special relativity and general relativity, proposed and published in 1905 and 1915, respectively. Special relativity applies to all physical phenomena in the absence of gravity. General relativity explains the law of gravitation and its relation to other forces of nature.It applies to the cosmological and astrophysical realm, including astronomy.
The theory transformed theoretical physics and astronomy during the 20th century, superseding a 200-year-old theory of mechanics created primarily by Isaac Newton. It introduced concepts including spacetime as a unified entity of space and time, relativity of simultaneity, kinematic and gravitational time dilation, and length contraction. In the field of physics, relativity improved the science of elementary particles and their fundamental interactions, along with ushering in the nuclear age. With relativity, cosmology and astrophysics predicted extraordinary astronomical phenomena such as neutron stars, black holes, and gravitational waves
A object of mass 200kg is pushed from rest by a force of 500N along a horizontal plane for 5.0 seconds. Calculate the acceleration of the object
Answer:
force=mass×acceleration
hence
acceleration is given by force÷mass
(500÷200)*5=12.5
how many significant figures 216 m
Answer:
Three
Explanation:
I hope this helps:)
how to find the mechanical advantage
Answer:
[tex]{ \bf{mechanical \: adv = \frac{load}{effort} }}[/tex]
why Fossil fuel has been used more in the existing world ?
A 4000 N force acts on an object that initially has a momentum of 400 kg-m/s for 0.9 seconds. What is the final momentum of the system?
Answer:
4360 Kgm/s
Explanation:
Applying,
Ft = M-M'................. Equation 1
Where F = force, t = time, M = Final momentum, M' = Initial momentum.
make M the subject of the equation
M = Ft+M'............ Equation 2
From the question,
Given: F = 4000 N, t = 0.9 seconds, M' = 400 kg-m/s
Substitute these values into equation 2
M = 4000+(0.9×400)
M = 4000+360
M = 4360 kgm/s
Hence the final momentum is 4360 kgm/s
round off 20.96 to 3 significant figures. a.20.9 b.20 c.21.0 d.21
Answer:
option c. 21.0
Explanation:
It was given that to find 3 significant figures. So the answer is 21.0
Can someone pls help, thank you in advance!
What is an example of a force applied at an angle to displacement
Answer:
an object sliding down hill
Explanation:
On a slope, the force applied is due to gravity. Its direction is straight down. If the object is sliding down the hill, its displacement is at an angle to the applied force. The angle of displacement will depend on the steepness of the hill.
Sort the processes based on the type of energy transfer they involve. condensation freezing deposition sublimation evaporation melting thermal energy added thermal energy removed
Answer:
condensation - thermal energy removed
freezing -thermal energy removed
deposition - thermal energy removed
sublimation - thermal energy added
evaporation - thermal energy added
melting - thermal energy added
Explanation:
Thermal energy is heat energy. Processes in which heat is added involve the addition of thermal energy while processes in which heat energy is removed involves removal of thermal energy.
Condensation involves a change from gas to liquid, freezing involves a change from liquid to solid while deposition involves the settling of mobile particles at a place. All these processes involve a decrease in energy of particles.
On the other hand, sublimation is a direct change from solid to gas, melting involves a change from solid to liquid while evaporation involves a change from liquid to gas. All these processes occur when energy is added to the particles in a system.
Answer:
condensation - thermal energy removed
freezing -thermal energy removed
deposition - thermal energy removed
sublimation - thermal energy added
evaporation - thermal energy added
melting - thermal energy added
Given: F = k· m. g
Solve for "k"
Answer:
[tex]F = kmg \\ k = \frac{F}{mg} [/tex]
Explanation:
F = k . m . g
=> F = k . mg
[tex] = > k = \frac{F}{mg} (ans)[/tex]
is placing a compass near a wire with live electrical current biology, chemistry, or physics?
The process of PLACING a compass wherever you want it involves Biology. Biology deals with everything that has to happen for your brain to send instructions to your muscles, your muscles to operate your arm and your hand, and your hand to move the compass to where you want it, while your eyes keep track of what's happening and send course-corrections through your brain.
Once you get the compass there and see it start doing strange things, those EFFECTS are explained by laws of nature that are covered in Physics.
Placing a compass near a wire with live electrical current involves physics. Because, the deflection in magnetic field by the current from the electrical wire is dealt with physics.
What is magnetic field ?A magnetic field is generated by the field lines originating from a magnet or an electrical coil. The moving current is always associated with a magnetic field.
A compass acts as a tiny magnet and it deflects to the north in the absence of an electrical field. If an electric field is brought in contact with the compass the needle will deflect into the direction of the magnetic field from the wire.
The strength of a magnetic field, associated electric field, magnetic flux etc. are more focused in the branches of physics. The magnetic properties of a substance is a physical property.
Find more on magnetic properties:
https://brainly.com/question/4242549
#SPJ2
A liquid has a density of 2 g/mL, the volume is measured at 20 mL, what is the mass of the liquid?
Answer: 40 grams, if it is two grams per mL and you have 20 mL, you multiply 2 grams/mL and you get the answer
An oscillator completes 240 cycles in 5.2 minutes.
Calculate its period (in seconds) and frequency (in Hz).
Answer:
I. Period = 1.3 seconds
II. Frequency = 0.769 Hertz
Explanation:
Given the following data;
Number of oscillation = 240 cycles
Time = 5.2 minutes.
Conversion:
1 minute = 60 seconds
5.2 minutes = X seconds
X = 60 * 5.2
X = 312 seconds
To find the following;
I. Period
Mathematically, the number of oscillation of a pendulum is given by the formula;
[tex] Number \; of \; oscillation = \frac {Time}{Period} [/tex]
Making period the subject of formula, we have;
[tex] Period = \frac {Time}{Number \; of \; oscillation} [/tex]
Substituting into the formula, we have;
[tex] Period = \frac {312}{240} [/tex]
Period = 1.3 seconds
II. Frequency
[tex] Frequency = \frac {1}{Period} [/tex]
Substituting the values into the formula, we have;
[tex] Frequency = \frac {1}{1.3} [/tex]
Frequency = 0.769 Hertz
factor that affect gravitation
1) Two major factors, mass and distance, affect the strength of gravitational force on an object.
2) Most common factors that affect gravity are mass of the body, distance from centers, shape of bodies,etc. Gravity is a binding force, always acting to bind any material closure and closure inwards. If we think this way, then gravity is maximum at its centre and decreases slowly away from its centre.
hope it helps you
mark my answer as brainlist and follow
have a nice day
PRESS THE PHOTO NEED HELP!!! 30 POINTS
1:-
[tex]\\ \sf\longmapsto cos\Theta=\dfrac{B}{H}[/tex]
[tex]\\ \sf\longmapsto cos\Theta=\dfrac{4}{5}[/tex]
2:-
[tex]\\ \sf\longmapsto tan\Theta=\dfrac{P}{B}[/tex]
[tex]\\ \sf\longmapsto Tan\Theta=\dfrac{3}{4}[/tex]
Key Notes:-
P denotes to Perpendicular.B denotes to Base.H denotes to Hypotenuse.Answer:
Cos A = 4/5
Tan A = 3/4
Explanation:
Cos A = Adjacent/Hypotenuse = 4/5
Tan A = Opposite/Adjacent = 3/4
Using your Periodic Table, which element below has the smallest atomic radius? A.) Sodium, B.) Chlorine, C.) Phosphorus, D.) Iron
Chlorine has the smallest atomic radius since the atomic radius decreases as you travel to the right and up
A group of students are designing a field study to investigate the length of time a traffic light remains yellow.
Answer:
3 to 7 seconds.
Explanation:
According to the traffic engineers the length or the duration of the signal to turn form yellow or amber to green is more than 5 seconds. A time interval is needed to easy out the traffic flow.A ball is dropped from the roof of a 25-m-tall building. What is the velocity of the object when it touches the ground? Suppose the ball is a perfect golf ball and it bounces such that the ve locity as it leaves the ground has the same magnitude but the op posite direction as the velocity with which it reached the ground How high will the ball bounce? Now suppose instead that the ball bounces back to a height of 20 m. What was the velocity with which it left the ground?
Answer:
a) [tex]h=25m[/tex]
b) [tex]v=19.8m/sec[/tex]
Explanation:
From the question we are told that:
Height [tex]h=25m[/tex]
Bounce Height [tex]h'=20m[/tex]
Generally the Kinematic equation is mathematically given by
[tex]V=\sqrt{2gh}\\\\V=\sqrt{2*9.81*25}[/tex]
[tex]V=22.1m/sec[/tex]
Therefore Height
[tex]h=\frac{V^2}{2g}\\\\h=\frac{22.1^2}{2*9.81}[/tex]
[tex]h=25m[/tex]
b)
Generally the Kinematic equation is mathematically given by
[tex]v^2=2ah[/tex]
[tex]v^2=2*9.8*20[/tex]
[tex]v=\sqrt{2*9.8*20}[/tex]
[tex]v=19.8m/sec[/tex]
Question in the picture please help me...
Show all steps please....
Answer: i)A to B : (ice) freezing
ii) B to C (water) boiling
C to D (steam) evaporating
explanation: 0° is the freezing point of water when temperature increases from 0° the water starts melting. As 100° is the boiling point of water so at 100° the water completely melts and it starts boiling during boiling water changes into steam(water vapour) and it evaporates
2. ¿Puede haber trabajo en un sistema si no hay movimiento
a. Sí, si hay una fuerza siempre.
b. Sí, ya que el movimiento es sólo relativo.
c. No, ya que un sistema que no se mueve no tiene energía.
d. No, porque la ecuación de trabajo lo define.
Answer:
d. No, porque la ecuación de trabajo lo define.
Explanation:
En Física, el trabajo realizado se puede definir como la cantidad de energía transferida cuando un objeto o cuerpo se mueve a lo largo de una distancia debido a la acción de una fuerza externa.
Matemáticamente, el trabajo realizado viene dado por la fórmula;
[tex] W = F * d [/tex]
Dónde;
W es el trabajo realizado.F representa la fuerza que actúa sobre un cuerpo. d representa la distancia recorrida por el cuerpo.Por lo tanto, podemos deducir de la definición de trabajo y su fórmula que el trabajo se realiza cuando un objeto (cuerpo) se mueve una distancia o experimenta cualquier forma de desplazamiento mientras transfiere energía.
You observe that you see more mockingbirds in small trees and more hawks in large trees. Which of the following is an appropriate scientific question based on this observation?
How does the size of a tree affect the bird species that prefer to live in it?
How do birds fly?
What type of food do birds eat?
What time of year to birds mate?
Answer:
A) How the size of a tree affect the bird species that prefer to live in it
Explanation:
I took the quiz
If 20N force produces an acceleration of 5ms^-2 In a body then the mass of the body will be:
A.4kg
B.5kg
C.1/4kg
D.1/5kg
a sphere of diameter 6.0
cm is moulded into a thin wire of diameter 0.2 mm calculate the length of the wire in metres
Answer:
V1 = 4/3 pi R^3 = pi D^3 / 6 D = 2 R volume of sphere
V2 = pi r^2 L = pi d^2 L / 4 volume of wire
V2 / V1 = 1 = 3/2 d^2 L / D^3 since volumes are equal
L = 2/3 D^3 / d^2 = 2/3 * 6^3 / .02^2 = 360,00 cm = 3600 m
which two phenomena make up electromagnetism?
A) moving charges in an electric current attract each other
B) permanent magnets form a magnetic field from one pole to the other pole
C) an electric current causes a magnetic field around a core of magnetic metal
D) a moving magnet causes an electric current in a magnetic metal
Explanation:
the correct answer is option ( C ) and ( D )
A cyclist goes round a circular path of circumference 343 m in s. The angle made by him, with the vertical is
WITH STEPS PLZ
you need the number of seconds to calculate the distance. I'm assuming that the seconds were written in the question but you forgot to write the here, you can calculate the distance then and find the exact point where the cyclist stopped since you have the circumference. then you can find the angle (after finding the distance he cycled) by subtracting it from 360 since the circular path will have an angle of 360 degrees.
Although your question lacks some data A general answer is provided :
The angle made vertically = 360° - x°
where x = angle at which the the cyclist stopped
and circumference of the circular path = Total Distance travelled by the cyclist
First step : determine the distance travelled by the cyclist vertically
circumference = 2*π*r
343 = 2*π * r
∴ r = 343 / ( 2π ) = 54.59
therefore distance travelled by the cyclist vertically = 54.59 * 2 = 109.18 m
Given that the time travelled is missing
assuming the angle to the distance travelled by the cyclist before it stopped vertically = 360° - x°
This is because the Total angle of a circular path = 360°
Learn more about circular paths : https://brainly.com/question/24210487
