Answer:
The virus will transfer the DNA encoding cholera toxin to the next bacteria it infects, which will make that bacteria cholera-causing.
Explanation:
The process described in this question is a kind of gene transfer in bacteria called TRANSDUCTION. Transduction is the transfer of fragments of DNA from one bacterium to another via a virus called bacteriophage.
As stated in this question, the virus (bacteriophage) infects a cholera-causing bacterium. The bacteriophage moves from lysogenic cycle to lytic cycle and includes some pieces of the bacterial DNA, which encodes information for making the cholera toxin, in its own genome.
This means that the cholera-making toxin DNA is now a part of the virus's genome and hence, will transfer it to the next bacteria it infects in a process called TRANSDUCTION. This will make that bacteria a cholera causing bacteria.
In pea plants, flowers are either white or purple: the purple color is produced by pigments called anthocyanins. The production of anthocyanins is a two-step process: the first step is controlled by the C gene and the second by the P gene. Both genes must produce functional proteins for anthocyanin to be produced. This is an example of:
Answer:
This is an example of gene translation.
Explanation:
Gene translation refers to the genetic process where a set of genes is used to create amino acids that will be responsible for creating a protein needed to perform some function or characteristic of the organism. In the question above, we can see that anthocyanin, responsible for the pigment of flowers, is created through the work of proteins that are created from gebes C and P. This is an example of gene translation, as it presents the formation of proteins regulated by genes.
Cystic fibrosis is most common in individuals of Northern European descent, affecting 1 in 3200 newborns. Assuming that these alleles are at Hardy-Weinberg equilibrium, what is the frequency of the disease-causing CFTR alleles in this population
Answer:
0.0177
Explanation:
Cystic fibrosis is an autosomal recessive disease, thereby an individual must have both copies of the CFTR mutant alleles to have this disease. The Hardy-Weinberg equilibrium states that p² + 2pq + q² = 1, where p² represents the frequency of the homo-zygous dominant genotype (normal phenotype), q² represents the frequency of the homo-zygous recessive genotype (cystic fibrosis phenotype), and 2pq represents the frequency of the heterozygous genotype (individuals that carry one copy of the CFTR mutant allele). Moreover, under Hardy-Weinberg equilibrium, the sum of the dominant 'p' allele frequency and the recessive 'q' allele frequency is equal to 1. In this case, we can observe that the frequency of the homo-zygous recessive condition for cystic fibrosis (q²) is 1/3200. In consequence, the frequency of the recessive allele for cystic fibrosis can be calculated as follows:
1/3200 = q² (have two CFTR mutant alleles) >>
q = √ (1/3200) = 1/56.57 >>
- Frequency of the CFTR allele q = 1/56.57 = 0.0177
- Frequency of the dominant 'normal' allele p = 1 - q = 1 - 0.0177 = 0.9823
do both plant cells and prokaryotic cells have 70S ribosomes
The suprachiasmatic nuclei enable the nervous system to respond to daily light/dark alterations through their stimulation of
Answer:
The suprachiasmatic nuclei enable the nervous system to respond to daily light/dark alterations through their stimulation of melatonin.
Explanation:
Melatonin is a hormone produced naturally by the body. Its function is to regulate the body's circadian cycle. This hormone is stimulated and begins to act by changing between a light environment and a dark environment. This stimulation interacts with the suprachiasmatic nuclei making the nervous system understand this change and luminosity of the environment and respond to the action of melatonin.
A muscle that is stimulated so frequently that the relaxation phase is eliminated is said to exhibit _______. Question 13 options: tetanus recruitment treppe wave summation
Answer:
tetanus
Explanation:
Tetanus causes a strong tonic contraction in skeletal muscles. This triggers a series of intermittent, progressive, and extremely painful muscle spasms. Tetanus is presented by patients who have stimulated a muscle too often, without allowing a moment of rest.
Try this for yourself. Suppose you want to estimate the number of field mice in a small field. One day you capture 500 mice, mark all of them and release them. The next week you capture 200 mice of which 40 were marked by you yesterday. What is your estimate of the population size?
Answer:
The approximate size of the field mice population is 2500 individuals.
Explanation:
There are different methods to study population density. There are direct methods and indirect methods. Among these last ones, we might find the "Mark-Recapture technique".
The Mark-Recapture technique assumes that the population is closed, during the sampling season there is no mortality nor natality, marks in the individual last the whole sampling season, and these do not affect the marked individual or their behavior. These marked individuals are randomly distributed in the population, and all the individuals have the same probability of being sampled.
The method consists of capturing a sample of individuals belonging to the population under study, in this case, the field mice population. After capturing the individuals, the researcher marks them and release them again. The third step is to sample again, capture a new amount of individuals, and count how many of them are marked. These marked individuals belong to the first sample. We can calculate the population size by using the Lincoln Index or any other index.
The Lincolns Index states that to obtain the population size, the research must follow the following procedure:
1) Take an initial sample with n1 number of individuals
2) Mark all the sampled individuals and release them
3) Take a second sample with n2 number of individuals
4) Count the number of marked individuals m
To estimate the total number of individuals in this population, N, the following equation must be considered:
N = (n1 x n2)/m
In the exposed example, this is:
• n1= 500 individuals in the first sample
• n2= 200 individuals in the second sample
• m= 40 individuals in the second sample that were previously marked
as they were part of the first sample
N = (n1 x n2)/m = (500 x 200) / 40 = 2500 individuals
The approximate size of the field mice population is 2500 individuals.
Different types of cells have different numbers and types of
O nuclei
O DNA
O cell membranes
O organelles
oxygen is carried by blood to all the cells of body in the form of ___________
Answer:
Oxygen is carried by blood to all the cells of the body in the form of haemoglobin.
Explanation:
Oxygen is carried in the blood in two forms:
(1) dissolved in plasma and red blood cells water (about 2% of the total)
(2) reversibly bound to haemoglobin (about 98% of the total).
Haemoglobin is a protein in the red blood cells and carries oxygen around our bodies. At the same time, carbon dioxide that is dissolved in the blood comes out of the capillaries back into the air sacs, ready to be breathed out.
The protein calcineurin binds to the protein calmodulin with an association rate of 8.9 × 103 M-1s-1 and an overall dissociation constant, Kd, of 10 nM. The dissociation rate kd is:_____. Please explain step by step.
A. 8.9 × 10^3 M-1s-1
B. 8.9 × 10^2 s-1
C. 1.1 × 10-10 s-1
D. 8.9 × 10-5 s-1
Answer:
D
Explanation:
From the information given:
Association rate [tex]K_a[/tex] = [tex]8.9 \times 10^3 M^{-1}s^{-1}[/tex]
dissociation constant [tex]K_D[/tex] = 10 nM
dissociation rate [tex]K_d[/tex] = ???
Using the following relation from equilibrium dissociation constant to determine the dissociation rate, we have:
[tex]K_D =\dfrac{ K_d}{K_a}[/tex]
[tex]K_d = K_D \times K_a[/tex]
[tex]K_d =(10*10^{-9} \ M) \times (8.9*10^3 \ M^{-1}{s^{-1})[/tex]
[tex]\mathbf{K_d =8.9*10^{-5} \ {s^{-1}}}[/tex]
A 45-year-old woman named Christine is measured as having the following skinfold thicknesses on the right side of her body: Triceps: 14mm; Thigh: 32mm; Suprailium: 28mm. Estimate her body fat percentage.
Answer:
The skinfold method, the measurement of subcutaneous fat folds, is the most widely adopted field method for the assessment of body fat, especially in children.
It is based on the principle that fat is of a known density and by “summing” measurements of subcutaneous fat thickness across the body, total and regional fat can be estimated.
Skinfold thickness measurements are typically used to rank individuals in terms of relative total “fatness”, or to assess subcutaneous fat at various regions of the body.
Population specific equations are used to derive estimates of percent body fat.
In infancy, it might be the sole tool available for assessing body composition longitudinally as other methods may not be feasible, or may only be suitable for use at body sizes e.g. PEA POD, can only measure infants up to 10kg.
The most generally used field method for determining body fat, particularly in kids, is the skinfold method, which involves measuring subcutaneous fat folds.
What is skinfold method?Skinfold method is defined as a method for determining how much body fat there is. It entails delicately pinching the skin and underlying fat in several locations using a tool called a caliper. To acquire precise findings using this quick and easy body fat estimation technique, a high level of competence is needed.
It is based on the idea that since subcutaneous fat thickness measurements may be "summed" to estimate total and regional fat because subcutaneous fat has a known density. Measures of skinfold thickness are widely used to categorize individuals based on their relative degrees of overall "fatness" or to assess subcutaneous fat in various bodily regions. Estimates of the percent body fat are derived using equations that are specific to a population.
Thus, the most generally used field method for determining body fat, particularly in kids, is the skinfold method, which involves measuring subcutaneous fat folds.
To learn more about skinfold method, refer to the link below:
https://brainly.com/question/12277553
#SPJ2
In a test cross, a pure-breeding plant is crossed with a plant suspected to be heterozygous (Aa). What is the genotype of the pure-breeding plant?
Answer:
aa
Explanation:
In genetics, a test cross is a cross performed to determine the unknown genotype of a phenotypically dominant organism. The test cross is done by crossing the unknown genotype with a homzygous recessive organism. The result of this cross tell us whether the unknown genotype is heterozygous or homzygous dominant.
According to this question, a test cross was conducted involving a pure breeding plant with a plant suspected to be heterozygous (Aa). Based on the explanation of a test cross above, the genotype of the pure-breeding plant will be "aa". Note; it must be recessive.
characteristics of Pisces
Answer:
Pisces are known as amazingly imaginative, creative, empathetic, and kind, they can also be overly sentimental, impressionable, and closed off.
Explanation:
Hope this helps!
How has the natural environment in your area been affected by the human environment?
Answer:
animals are dying :( and people are hunting
Explanation:
One true-breeding line of mice is obese and dark and another is lean and light. Dark is dominant to light, but obese and lean exhibit incomplete dominance. What proportion of offspring from a dihybrid cross should be both dark and intermediate between obese and lean
Answer:
6/16 Intermediate and dark ⇒ 2/16 OoDD + 4/16 OoDd
Explanation:
Due to technical problems, you will find the complete explanation in the attached files
I need help asap
I need help asap
Answer:
c
Explanation:
i dont care
II. Sequencing Directions: Arrange the procedure/steps to fold a banana table napkin by writing 1 to 8 on the blank before the number.
Repeat the last step with the left side, folding the left tip up to the far corner, creating a diamond shape with a seam running down the center.
Fold the right end up to meet the far corner, ensuring the edge of this new fold lays on the centerline as shown.
Stand it up and tug at it where needed to even it up and out. If your napkins are too limp, then think of starch as a napkin and make them good and stiff round it.
Lay the napkin face down in front of you. Curl the left and right sides of the napkin up so they meet in the middle and tuck one into the other.
Fold the bottom of the napkin up about 2/4's of the way and press this fold down well. Fold the napkin in half diagonally. Orient the napkin so the open ends point away from you.
Fold the smaller triangle down so the point rests on the near edge of the napkin. Press.
Can you please answer it for me
Please if someone know
Explanation:
Lay a square napkin down on a clean work surface so that it's open all the way. Iron if needed.
STEP 2: FOLD IN DIAGONAL HALF
Grab a hold of the right hand corner nearest you and fold it over to meet the opposite upper left corner. Straighten out the edges so that they all meet up.
STEP 3: TURN IT
Turn the triangle so that the longest side is parallel to you and the table's edge.
STEP 4: FOLD IN
Fold the left corner in so that it sits JUST past the midway point of the long side of the triangle, like pictured.
STEP 5: FOLD IN AGAIN
Now repeat for the right hand corner.
STEP 6: FOLD OVER
Take the lower left corner and bring it in to the bottom midpoint of the now 'house' shaped napkin. Press the new left side fold down.
STEP 7: FOLD OVER AGAIN
Repeat on the right side.
STEP 8: FOLD UP
Take both bottom corners and bring them up to rest just below the top right corners. Press down the new folds.
STEP 9: CLOSE THE ENVELOPE
Take the top point of the envelope 'flap' and bring it down (or close it) to complete the envelope.
STEP 10: ADD A PERSONALIZED CARD
Use your envelope napkins to include a personalized 'letter' or card to each guest's plate. Some ideas for what this could be are:
holiday greeting card
menu
place card
family photos from past celebrations
holiday story or poem
coloring cards with pencil crayons for kids
game cards: trivia, scavenger hunt, etc
What is added to tacos, burritos, and soups that is
high in fiber?
Answer: flax seed whole wheat tortillas.
1⁄2 cup low-fat refried beans.
1⁄4 cup low-fat cheddar cheese.
leaves lettuce.
1⁄ cup salsa.
1⁄4 cup fat free sour cream.
Pinto beans are added to tacos, burritos, and soups that are high in fiber.
What are fibers and their types?The body is unable to digest fiber, which is a form of carbohydrate. While fiber cannot be converted into glucose, the sugar that results from the breakdown of most carbs, fiber travels through the body undigested.
The solubility, viscosity, and fermentability of dietary fibers, which have an impact on how they are metabolized by the body, can be used to classify them in general. Dietary fibers have a wide range of chemical compositions.
Fibre comes in two varieties: soluble and insoluble. Both are crucial for good health, digestion, and illness prevention. Thus, Pinto beans are added to tacos, burritos, and soups that are high in fiber.
Learn more about fibers, here:
https://brainly.com/question/13805719
#SPJ6
choose the letter of the correct answer 1. Which one of the following is NOT an organic compound? a. Methane b. Carbon dioxide d. Lactic acid C. Oil
Answer:
B
Explanation:
How do scientists create models of past and future climate?
Answer:
To understand how our world is evolving, scientists use computer programs called climate models to forecast future climate. Climate models function in the same way that a computer lab does. Climate models are computer programs that scientists use to analyze how our world is changing.
-------------------------
hope it helps...
have a great day!!
Where does crude oil come from?
A. Bauxite reserves
B. Ancient sea life
C. Volcanic magma
D. Ancient plants
Answer:
B. Ancient sea life
Individuals with premutation length repeats in FMR1 may have some of the phenotypes of Fragile X but not others, which is _____________; for example, some individuals may have cognitive deficiencies, while others might have late onset ataxia. In addition, some individuals will have no phenotypes of the condition at all, due to ____________.
Answer:
variable expressivity; incomplete penetrance
Explanation:
In genetics, variable expressivity refers to the fact that individuals having the same alleles/genes/genotype associated with a particular genetic condition may exhibit different clinical features of this condition. In general, variable expressivity is due to the combination of both genetic and environmental factors. An example of variable expressivity is the Marfan syndrome, where all individuals with this disorder have a dominant mutation in the FBN1 (fibrillin 1) gene and show different degrees of the same phenotype. Moreover, incomplete penetrance (also known as reduced penetrance) refers to the complete absence of a genetic trait or disease in individuals having alleles/genes/genotype associated with the condition. In consequence, individuals with incomplete penetrance do not develop features of the disease. An example of incomplete penetrance is given by those individuals with mutations in BRCA1/BRCA2 genes (associated with an increased risk of developing breast cancer) that do not develop cancer.
18. Why are enzymes important to cells?
о
They provide structural support.
о
They form the two layers of membranes.
They store large quantities of energy.
о
They help bring about chemical reactions
Answer:
An enzyme is a type of protein found within a cell. Enzymes create chemical reactions in the body. They actually speed up the rate of a chemical reaction to help support life.
Writing an Equation in Slope-Intercept Form
Q
Check
y
Determine the equation for the given line in
slope-intercept form
4
O y = -5x-1
=-1
2
X
-6
-4
-2
2
LO
O y = x+1
O y = 3x+1
O y=-x-1
-2
-4
Hint
Answer:
need a full picture plzzz
If a diploid cell has 20 chromosomes, how many sister chromatids will be present
during PROPHASE of MITOSIS?
Answer:
92 chromatids
Explanation:
During phosphate, the nuclear envelope of the cell (which is where the 92 chromatids are contained) begins to break down. The centrioles, which are the only present in animal cells, separate and each moves to an opposite end of the cell
Complete these sentences by matching the phrases below.
When light
waves are
emitted by a
moving source,
scientists can
?
the Doppler effect.
measure:
Scientists smash
together tiny bits
of matter using:
?
cosmic microwave
background radiation,
Scientists
extrapolate
backwards in
time to derive:
?
particle accelerators.
The extremely
low temperature
of outer space
can be explained
as:
?
the Big Bang theory
NEED HELP ASAP!
The Doppler Effect talks about the frequency of sound and light as the source and person move. So, When light waves are emitted by a moving source, scientists can measure = the Doppler effect.
Cosmic microwave background radiation has the word "cosmic" in it, so you can assume it has to do with space automatically. There is radiation in space too, so I'm pretty sure that The extremely low temperature of outer space can be explained as = cosmic microwave background radiation.
Particle accelerators are these big machines that usually smash protons/electrons together, so Scientists smash together tiny bits of matter using = particle accelerators.
And now, by process of elimination and because the Big Bang Theory talks about the creation of Earth, we know that Scientists extrapolate backwards in time to derive = the Big Bang Theory.
If 622 water molecules were removed during the synthesis of a specific polysaccharide, how many monomers were joined together to make this molecule? need help please and thank you
Answer:
623 monomers
Explanation:
In a dehydration synthesis reaction, one water molecule is removed for every bond that is created between 2 monomers.
Linking 3 monomers together would remove 2 water molecules.
Following this pattern, the number of water molecules removed will always be one less than the number of monomers that were joined together.
So, if 622 water molecules were removed, then 623 monomers were joined together.
The answer is 623 monomers.
Which isn’t an example of a matrix in which organisms may become fossilized
Answer:
where's the options for this question?
:/
there is no option?? ?
The extinction vortex represents the idea that even if an organism is extant, it may have a gene pool that will not support its long-term survival.A. TrueB. False
Answer:
True.
Explanation:
Extinction vortex is a model used by scientists to understand extinction dynamics within a community. This model allows scientists to assess and understand how a population can become highly vulnerable to elements of its habitat, becoming increasingly apt for extinction. According to this model, any organism is capable of extinction, as all are susceptible to having a gene pool that will not allow its survival, regardless of the environment.
You are carrying a case of 24 bottles of water up the stairs to your third-story apartment. What type of contraction are the muscles in your arms experiencing
Answer:
Concentric contraction.
Explanation:
Concentric contraction is a type of contraction that the muscles in arms experiencing when an individual lifting 24 bottles of water up the stairs. A concentric contraction is a type of muscle activation that creates tension on your muscle as it shortens. As your muscle shortens, it produces enough force to move an object in the upward direction. In weight training we can easily see concentric movement.
Can someone help me with this pls
Which of the following results in agglutination?
(1) similar blood types being mixed
(2) the separation of blood cells from plasma
(3) antigens reacting to other antigens
(4) antibodies reacting to foreign antigens (5) the donation of blood to a blood bank
Answer:
your answer is antibodies reacting to foreign antigens.
