Answer:
Option (b) is correct.
Explanation:
The amount of heat required to raise the temperature of substance of mass 1 kg by 1 degree C, is called specific heat of the substance.
The formula of the specific heat is
H = m c (T' - T)
where, m is the mass, c is the specific heat and T' - T is the change in temperature.
So, to know the rise in temperature, by adding the known amount of heat, the specific heat is required.
So, option (b) is correct.
what is effort arm
don't say the answer of gogle
Answer:
effort arm mean the use of any work by using your hand force motion or by hand power
Determine the values of m and n when the following average magnetic field strength of the Earth is written in scientific notation: 0.0000451 T. Enter m and n, separated by commas.
Answer:
B = 4.51×10⁻⁵ T
Explanation:
Given that,
The average magnetic field strength of the Earth is 0.0000451 T.
We need to write the value in the form of scientific notation. Any number in scientific notation is written as follows :
N=a×bⁿ
Where
n is any integer and a is a real no
So,
0.0000451 = 4.51×10⁻⁵ T
So, the required answer is equal to 4.51×10⁻⁵ T.
what is the resistance of a bulb of 40w connected in a line of 70v
Answer:
122.5 ohm
Explanation:
Given :
P=40 w
V= 70 V
R=?
Resistance can be calculated as :
[tex]P=\frac{V^{2} }{R} \\40=\frac{(70)^{2} }{R}\\40=\frac{4900}{R} \\R=\frac{4900}{40} \\R=122.5 ohm[/tex]
Therefore, resistance of the bulb will be 122.5 ohm
Which of the following phenomenon odd called photoelectric effect?
A. High energy electrons impinge on a metallic Annie which emits electrons
B. A high energy photon emits photons as it slows down
C. A metal absorbs a quanta of light and then emits electrons
D. Two electrons are created from a quanta of light.
two electrons are created from a quanta of kight
A crucible (container) of molten metal has an open top with an area of 5.000 m^2. The molten metal acts as a blackbody radiator. The intensity spectrum of its radiation peaks at a wavelength of 320 nm. What is the temperature of that blackbody?
Answer:
T = 9056 K
Explanation:
In the exercise they indicate that the body can be approximated by a black body, for which we can use the Wien displacement relation
λ T = 2,898 10⁻³
where lam is the wavelength of the maximum emission
T = 2,898 10⁻³ /λ
let's calculate
T = 2,898 10⁻³ / 320 10⁻⁹
T = 9.056 10³ K
T = 9056 K
What does a model of a light wave tell us about
brightness and color?
Answer:
A wave model of light is useful for explaining brightness,color, and the frequency-dependent bending of light at a surface between media. However, because light can travel through space, it cannot be a matter wave, like sound or water waves.
What is a reasonable measurement for the distance to Neptune?
30 light years
30 kilometers
30 parsecs
30 Astronomical Units
Answer:
30 kilometers is a reasonable measurement
HELP ME PLEASE!!!
Which 2 statements are true about this chemical reaction that forms acid rain?
Answer:
B.
Explanation:
HNO2 is less stable thus dissociates easily to HNO3 + NO + H2O while HNO3 is a strong acid. Thus when they react with H2O they form acid rain
Answer:
B
Explanation:
dont have one just trust me
You take your pulse and observe 80 heartbeats in a minute. What is the period of your heartbeat? What is the frequency of your heartbeat?
Answer:
120 beats per minute.
Explanation:
If I take your pulse and observe 80 heartbeats in a minute. Then the period of your heartbeat is 0.8 s and frequency is 1.3Hz.
What is Heartbeat ?A pulse is the term used in medicine to describe the tactile arterial palpation of the cardiac cycle (heartbeat) by skilled fingertips. Any location where an artery can be compressed close to the surface of the body, such as the carotid artery in the neck, the radial artery in the wrist, the femoral artery in the groyne, the popliteal artery behind the knee, the posterior tibial artery near the ankle joint, and on the foot, can be used to palpate the pulse (dorsalis pedis artery). Heart rate may be determined by monitoring pulse, or the number of arterial pulses per minute. Auscultation, which is the process of counting the heartbeats while listening to the heart using a stethoscope, is another way to determine the heart rate. Typically, three fingers are used to gauge the radial pulse.
Given,
heart beat = 80 beats/min = 1.3 beats/s
Frequency is nothing but how much beats is heart having in one second and that is 1.3 beats/s. Hence frequency of heart is 1.3Hz.
The Period is reciprocal of frequency,
T = 1/f = 0.8 s
To know more about frequency :
https://brainly.com/question/29739263
#SPJ2.
Khối lượng ban đầu của mặt trời m⊙ = 2 × 1030 kg trong đó có 71 % là
hydrogen. Trong 5×10^9 năm đầu tiên, mặt trời phát ra năng lượng với công suất
3.86 × 10^26 W, nhờ phản ứng
4p → 4+2He + 2e
+ 2νe + 26 MeV
trong đó bốn proton tổng hợp thành hạt α và tỏa ra năng lượng 26 MeV. Hãy
xác định
a) số hạt proton của mặt trời tại thời điểm ban đầu.
b) số hạt proton của mặt trời tham gia phản ứng trong 1 năm.
c) số hạt proton còn lại trong mặt trời sau 5 × 10^9 năm.
d) thời gian để tiêu thụ hết 10 % số hạt proton còn lại của mặt trời
Answer:
jsgssbvwsvs
Explanation:
ifmd understand
What is the magnitude of a vector that has the following components: x = 32 m y = -59 m
Answer:
Explanation:
Since the x and y components are given
The vectors Magnitude = √32²+(-59)²
=67.12m
40 ohms
1.2 A
40 ohms
12 V
Calculate the total energy developed in 5
minutes by the system above.
Answer:
17280 J and 1080 J
Explanation:
Given :
R= 40 ohm
I=1.2A
t= 5 min=60×5=300 sec
Now,
Total energy can be calculated as:
[tex]E=I^{2} Rt\\E=(1.2)^{2} *40*300\\E=17280 J[/tex]
Now,
V=12V
R=40 Ohm
[tex]E=\frac{V^{2} }{R} *t\\E=\frac{(12)^{2} }{40} *300\\E=1080 J[/tex]
Total energy is 17280 J and 1080 J
help plzzzzzzzzzzzz ?
Explanation:
1. First, let's find the total resistance of the circuit. We begin by combining [tex]R_{4}[/tex], [tex]R_{5}[/tex] and [tex]R_{6}[/tex]:
[tex]R_{456}=R_{4} + \dfrac{R_{5}R_{6}}{R_{5} + R_{6}}[/tex]
[tex]= 6\:Ω + \dfrac{(3\:Ω)(5\:Ω)}{3\:Ω+5\:Ω} = 7.9\:Ω[/tex]
Now time to combine [tex]R_{2}[/tex] and [tex]R_{3}[/tex] and they are connected in series so
[tex]R_{23} =R_{2} + R_{3} = 17\:Ω[/tex]
Note that [tex]R_{23}[/tex] and [tex]R_{456}[/tex] are connected in parallel so
[tex]R_{23456} = \dfrac{R_{23}R_{456}}{R_{23}+R_{456}}=5.4\:Ω[/tex]
Finally, [tex]R_{23456}[/tex] is connected in series with [tex]R_{1}[/tex] so the total resistance [tex]R_{T}[/tex] is
[tex]R_{T} = R_{1} + R_{23456} = 10\:Ω + 5.4\:Ω = 15.4\:Ω[/tex]
2. The total current in the circuit is
[tex]I_{T} = \dfrac{V}{R_{T}} = \dfrac{20\:V}{15.4\:Ω} = 1.3\:A[/tex]
3. The voltage drop across [tex]R_{1},\:V_{1}[/tex] is
[tex]V_{1} = I_{T}R_{1} = (1.3\:A)(10\:Ω) = 13\:V[/tex]
4. We can see that [tex]I_{T} = I_{1} + I_{2}[/tex]. To solve for [tex]I_{1}[/tex], we need [tex]V_{23}[/tex], which is just [tex]V_{T} - V_{1} = 20\:V - 13\:V = 7\:V[/tex] , which gives us
[tex]I_{1} = \dfrac{V_{23}}{R_{23}} = \dfrac{7\:V}{17\:Ω} = 0.4\:A[/tex]
5. From #2 & #4, [tex]I_{2} = 1.3\:A - 0.4\:A = 0.9\:A[/tex] and we also know that the voltage drop across [tex]R_{456}[/tex] is 7 V, the same as that of [tex]R_{23}[/tex]. The voltage drop across [tex]R_{4}[/tex] is
[tex]V_{4} = I_{2}R_{4} =(0.9\:A)(6\:Ω) = 5.4\:V[/tex]
This means that the voltage drop across [tex]R_{6}[/tex] is 7 V - 5.4 V = 1.6 V. Knowing this, the current through [tex]R_{6}[/tex] is
[tex]I_{6} = \dfrac{1.6\:V}{5\:Ω} = 0.3\:A[/tex]
When you release some of the paint from a spray paint can and the can remains at the same temperature, which gas law does this represent?
Answer:
Boyle's law.
Explanation:
Robert Boyle was an Irish chemist and is famously referred to as the first modern chemist. He was born on the 25th of January, 1627 in Lismore, Ireland and died on the 31st, December 1691, London, United Kingdom.
Boyles states that when the temperature of an ideal gas is kept constant, the pressure of the gas is inversely proportional to the volume occupied by the gas.
Mathematically, Boyles law is given by;
[tex] PV = K[/tex]
[tex] P_{1}V_{1} = P_{2}V_{2} [/tex]
Where;
P1 is the original pressure.
P2 is the final pressure.
V1 is the original volume.
V2 is the final volume.
Hence, when you release some of the paint from a spray paint can by applying an amount of pressure and the can remains at the same temperature, the gas law which this represent is Boyle's law.
Hey, can a physics major help me?
I have been wondering about the exact difference between theories laws facts and hypothosis.
I know the general layout but I am still a bit confused.
100 points for answering and brainly if it is a good one.
Answer:
A hypothesis is a limited explanation of a phenomenon; a scientific theory is an in-depth explanation of the observed phenomenon. A law is a statement about an observed phenomenon or a unifying concept
Answer:
Explanation:
will try 2 explain fact, hypothesis, theory n law
fact is the starting pt: e.g. apple falls from tree
hypothesis tries 2 explain a fact: e.g. there is a force pulling down apple
theory is a complete explanation w/ equations n stuff: e.g. Newton came up w/ theory of gravitational attraction force
law is a theory dat has been proven right through tests n experiments: Newton's gravity theory had been proven right in many many tests.
A 620 N physics student stands on a bathroom scale in an elevator that is supported by a cable. The combined mass of student plus elevator is 870 kg. As the elevator starts moving, the scale reads 450 N.
Required:
a. Find the acceleration of the elevator (magnitude and direction).
b. What is the acceleration if the scale reads 670 N?
c. If the scale reads zero, should the student worry? Explain.
d. What is the tension in the cable in parts (a) and (c)?
Answer:
(a) 9.28 m/s2
(b) 9.03 m/s2
(c) 9.8 m/s2
(d) 450 N, 670 N
Explanation:
mass of elevator + student, m = 870 kg
Reading of scale, R = 450 N
(a) When the elevator goes down, the weight decreases.
Let the acceleration is a.
By the Newton's second law
m g - R = m a
870 x 9.8 - 450 = 870 a
a = 9.28 m/s2
(b) R = 670 N
Let the acceleration is a.
870 x 9.8 - 670 = 870 a
a = 9.03 m/s2
(c) If the scale reads zero, it mean the elevator is falling freely. The acceleration is downwards and its value is 9.8 m/s2.
(d) Tension in cable is 450 N and 670 N.
If the car falls down the side of the cliff, what is happening to the gravitational potential energy of the falling car? (Assume the bottom of the cliff is zero)
Answer:
Sentences with many clauses and phrases are difficult to understand because the clauses and phrases typically _____.
modify other clauses and phrases in the sentence
refer to other sentences in the passage
make it hard to determine where the sentence ends
change the intended meaning of the sentence
Explanation:
A skateboarder is inside of a half pipe, shown here. Explain her energy transformations as she jumps off at point A, slides to point B, and finally reaches point C.
A homeowner has a new oil furnace which has an efficiency of 60%. For every 100 barrels of oil used to heat his house, how much (in barrels of oil) goes up the chimney as waste heat?
Answer:
below
Explanation:
A heat engine with 0.100 mol of a monatomic ideal gas initially fills a 3000 cm3 cylinder at 800 K. The gas goes through the following closed cycle Isothermal expansion to 5000 cm3 ?
Part A How much work does this engine do per cycle? Express your answer with the appropriate units. sochoric cooling to 200 K -Isothermal compression to 3000 cm3. - Isochoric heating to 800 K Value Units
Part B What is its thermal efficiency? Express your answer with the appropriate units.
Answer:
below
Explanation:
Part A) This engine works per cycle is 254.9 J.
Part B) The thermal efficiency is 23.42%
What is the thermal efficiency?The thermal efficiency of any heat engine is represented in percentage of heat energy converted into work.
For isothermal expansion, work done is
W₁ =nRT₁ x ln(V₂/V₁)
W₁ = 0.1 x 8.314 x 800 x ln(5000/3000)
W₁ = 339.8 J =Q₁
For isochoric cooling ,
W₂ =0
Q₂ =nCvdT = 0.1 x 3R/2 x (T₂-T₁)
Q₂ = -748.3 J
For isothermal compression,
W₃ =nRT₂ ln (V₄/V₃)
W₃ = 0.1 x 8.314 x 200 x ln(3000/5000)
W₃ = -84.9J
For isochoric heating
W₄ =0
Q₄ =nCvdT = 0.1 x 3R/2 x (800-200)
Q₄ = -748.3 J
Total work done in all the process W = W₁ +W₂ +W₃ +W₄
W =254.9 J
Thus, the work done is 254.9 J
Thermal efficiency = Work done/Heat taken
η = W/ Q₁ +Q₄
η = [254.9 / 339.8 +748.3 ] x 100 %
η = 0.2342 x 100 %
η = 23.42%
Thus, the thermal efficiency is 23.42%
Learn more about thermal efficiency.
https://brainly.com/question/13039990
#SPJ2
'
Calculate the terminal velocity of a rain drop of radius 0.12cm
Explanation:
Given that,
The radius of rain drop, r = 0.12 cm = 0.0012 m
The viscocity of air is, [tex]\eta=18\times 10^{-5}\ poise[/tex]
Let the viscous force is, [tex]F = 0.010173\ N[/tex]
The viscous force is given by :
[tex]F=6\pi \eta rv\\\\v=\dfrac{F}{6\pi \eta r}[/tex]
Put all the values,
[tex]v=\dfrac{0.010173}{6\pi 18\times 10^{-5}\times 0.0012 }\\\\v=2498.58\ m/s[/tex]
If ATM is 102 kPa, what force does the atmosphere exert on the palm of your hand which has an area of 0.016 meters?
Answer:
Force = 1.632 Newton
Explanation:
Given the following data;
Pressure = 102 kPa
Area = 0.016 m²
To find what force the atmosphere exert on the palm of your hand;
Mathematically, pressure is given by the formula;
[tex] Pressure = \frac {Force}{area} [/tex]
Force = 102 * 0.016
Force = 1.632 Newton
A 3-kg projectile is launched at an angle of 45o above the horizontal. The projectile explodes at the peak of its flight into two pieces. A 2-kg piece falls directly down and lands exactly 50 m from the launch point. Determine the horizontal distance from the launch point where the 1-kg piece lands.
1517.4 m
Step-by-step explanation:
Since the projectile broke up at the peak of its flight, it already traveled half its initial range so we can find its initial launch velocity [tex]v_0[/tex] from the equation
[tex]\frac{1}{2}R= \dfrac{1}{2} \left(\dfrac{v_0^2}{g}\sin 2\theta_0 \right)[/tex]
where [tex]\theta_0 = 45°[/tex] and [tex]\frac{1}{2}R = 50\:\text{m}[/tex] so we will get [tex]v_0=31.3\:\text{m/s}[/tex]. Next, we can use the equation
[tex]v_y = v_0y - gt = v_0 \sin 45 - gt[/tex]
and since [tex]v_y=0[/tex] at its peak, we get t = 22.1 s. Let's set this aside for a moment and we'll use it later.
At the top of its peak, we can use the conservation law of linear momentum. Let M be the mass if of the original projectile, [tex]m_1[/tex] be the mass of the larger fragment (2 kg) and [tex]m_2[/tex] be the mass of the smaller fragment (1 kg). We can write the conservation law as
[tex]Mv_0x = m_1V_1 + m_2V_2[/tex]
where [tex]V_1\:\text{and}\:V_2[/tex] are the velocities of the fragments immediately after the break up. But we also know that [tex]V_1=0[/tex] so the velocity of [tex]m_2[/tex] can be calculated from the conservation law as
[tex]Mv_0 \cos 45° = m_2V_2[/tex]
or
[tex]V_2 = \dfrac{M}{m_2}v_0 \cos 45° = 66.4\:\text{m/s}[/tex]
Now we can calculate the horizontal distance the smaller fragment traveled after the break up. Recall that the amount of time for it to go up is also the amount of time to get down so the horizontal distance x is
[tex]x = V_2 t = (66.4\:\text{m/s})(22.1\:\text{s})= 1467.4\:\text{m}[/tex]
Therefore, the total distance traveled from the launch point is
[tex]D = 50\:\text{m} + 1467.4\:\text{m}=1517.4\:\text{m}[/tex]
12) A negatively-charged balloon touching a wooden wall
A) pulls positive charge on the wall surface toward it.
B) pushes negative charge in the wall away from it.
C) polarizes molecules in the wall.
D) all of the above.
Answer:
D) all of the above.
Explanation:
First polarises it, cahrging and discharging occurs at once.
A negatively charged balloon touching a wooden wall then from the given options option D is correct which is all of the above.
What is a charge?Charged matter experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge. Positive or negative charges can exist in an electric field (commonly carried by protons and electrons, respectively).
Contrary charges attract one another, while like charges repel one another. A neutral object is one that carries no net charge. Classical electrodynamics, the name given to an early understanding of how charged particles interact, is still accurate for issues that do not call for taking into account quantum phenomena.
In the first step it polarizes molecules in the wall, then charging and discharging in the wall will take place at once.
To get more information about Charge :
https://brainly.com/question/19886264
#SPJ2
An iron nail floats in mercury and sinks in water. explain why?
Answer:
because density of iron is more than that of water but less then that of Mercury
hope it's helpful
Suppose there are 3 molecules in a container. If each molecule has a 1-in-2 chance of being in the left half of the container, what is the probability that there are exactly 2 molecules in the left half of the container?
Answer:
Total probability = 3/8
Explanation:
Below is the calculation:
Number of molecules in the container = 3
The probability of one molecule in the left half, P = 3 / 2 = 1.5 or 1/2
The probability of second molecule in the left half, P1 = (3/4)
Total probability = P x P1
Total probability = (1/2) x (3/4)
Total probability = 3/8
In addition to acceleration, what else will be a maximum at the amplitude for SHM?
A. Potential energy
B. Kinetic energy
C. Nuclear energy
D. Chemical energy
It is Potential energy's
If a rock displaces 7 ml of water, what is the volume of the rock?
Answer:
if i am not mistaken the volume is 7, because it only took that much space
Một vật chuyển động tròn đều có chu kì T = 0,25 s. Tính tần số chuyển động f của vật?
Explanatio
omega=2pi/T
Answer:
0
0000
Explanation:
A balloon is filled with 80 liters of gas on a day where the temperature was 34 degrees at sea level which is 101.3 kPa and released. As the balloon rises to a certain altitude, the temperature drops to 0 degrees celsius and the balloon doubles in volume. What is the atmospheric pressure at that altitude?
Answer:
0.444atm
Explanation:
Using the combined gas law equation;
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressure (
P2 = final pressure (
V1 = initial volume (L)
V2 = final volume (L)
T1 = initial temperature (K)
T2 = final temperature (K)
According to this question,
P1 = 101.3 kPa = 101.3 × 0.00987 = 0.999atm
P2 = ?
V1 = 80L
V2 = 160L (double of V1)
T1 = 34°C = 34 + 273 = 307K
T2 = 0°C = 0 + 273 = 273K
Using P1V1/T1 = P2V2/T2
0.999 × 80/307 = P2 × 160/273
79.92/307 = 160P2/273
Cross multiply
307 × 160P2 = 79.92 × 273
49120P2 = 21818.16
P2 = 21818.16 ÷ 49120
P2 = 0.444
P2 = 0.444atm
