If you and a friend are standing side-by-side watching a soccer game, would you both view the motion from the same reference frame?

a. Yes, we would both view the motion from the same reference point because both of us are at rest in Earth’s frame of reference.
b. Yes, we would both view the motion from the same reference point because both of us are observing the motion from two points on the same straight line.
c. No, we would both view the motion from different reference points because motion is viewed from two different points; the reference frames are similar but not the same.
d. No, we would both view the motion from different reference points because response times may be different; so, the motion observed by both of us would be different.

Answer:

θ = 57.4°

Explanation:

The complete formula to find out the work done by the plane is as follows:

[tex]W = FdCos\theta[/tex]

where,

W = Work = 200000 J

F = Force = Tension = 2560 N

d = distance = 145 m

θ = angle between rope and horizontal = ?

Therefore,

[tex]200000\ J = (2560\ N)(145\ m)Cos\theta\\\\Cos\theta = \frac{200000\ J}{371200\ J}\\\\\theta = Cos^{-1}(0.539)[/tex]

θ = 57.4°

Answer:

The expected radius of the Earth is 3.883 meters.

Explanation:

The formula for the escape speed is derived from Principle of Energy Conservation and knowing that rocket is initially at rest on the surface of the Earth and final energy is entirely translational kinetic, that is:

[tex]U = K[/tex] (1)

Where:

[tex]U[/tex] - Gravitational potential energy, in joules.

[tex]K[/tex] - Translational kinetic energy, in joules.

Then, we expand the formula by definitions of potential and kinetic energy:

[tex]\frac{G\cdot M\cdot m}{r} = \frac{1}{2}\cdot m \cdot v^{2}[/tex] (2)

Where:

[tex]G[/tex] - Gravitational constant, in cubic meters per kilogram-square second.

[tex]M[/tex] - Mass of the Earth. in kilograms.

[tex]m[/tex] - Mass of the rocket, in kilograms.

[tex]r[/tex] - Radius of the Earth, in meters.

[tex]v[/tex] - Escape velocity, in meters per second.

Then, we derive an expression for the escape velocity by clearing it within (2):

[tex]\frac{GM}{r} = \frac{1}{2}\cdot v^{2}[/tex]

[tex]v = \sqrt{\frac{2\cdot G \cdot M}{r} }[/tex] (3)

If we know that [tex]v = \frac{1}{21}\cdot c[/tex], [tex]c = 3\times 10^{8}\,\frac{m}{s}[/tex], [tex]M = 5.94\times 10^{24}\,kg[/tex], [tex]G = 6.67\times 10^{-11}\,\frac{m^{3}}{kg\cdot s^{2}}[/tex] and [tex]M = 5.94\times 10^{24}\,kg[/tex], then the expected radius of the Earth is:

[tex]\frac{GM}{r} = \frac{1}{2}\cdot v^{2}[/tex]

[tex]r = \frac{2\cdot G \cdot M}{v^{2}}[/tex]

[tex]r = \frac{2\cdot \left(6.67\times 10^{-11}\,\frac{m^{3}}{kg\cdot s^{2}} \right)\cdot (5.94\times 10^{24}\,kg)}{\left[\frac{1}{21}\cdot \left(3\times 10^{8}\,\frac{m}{s} \right) \right]^{2}}[/tex]

[tex]r = 3.883\,m[/tex]

The expected radius of the Earth is 3.883 meters.

Answer:

Answer:

because it look more impressive than empty dark sky .

Answer:

 v = -v₀ / 2

Explanation:

For this exercise let's use kinematics relations.

Let's use the initial conditions to find the acceleration of the electron

            v² = v₀² - 2a y

when the initial velocity is vo it reaches just the negative plate so v = 0

           a = v₀² / 2y

now they tell us that the initial velocity is half

          v’² = v₀’² - 2 a y’

          v₀ ’= v₀ / 2

at the point where turn v = 0              

          0 = v₀² /4  - 2 a y '

          v₀² /4 = 2 (v₀² / 2y)  y’

          y = 4 y'

          y ’= y / 4

We can see that when the velocity is half, advance only ¼ of the distance between the plates, now let's calculate the velocity if it leaves this position with zero velocity.

         v² = v₀² -2a y’

         v² = 0 - 2 (v₀² / 2y) y / 4

         v² = -v₀² / 4

         v = -v₀ / 2

We can see that as the system has no friction, the arrival speed is the same as the exit speed, but with the opposite direction.

Answer:

[tex]\lambda=6.83\times 10^{-5}\ m[/tex]

Explanation:

Given that,

An infrared telescope is tuned to detect infrared radiation with a frequency of 4.39 THz.

We know that,

1 THz = 10¹² Hz

So,

f = 4.39 × 10¹² Hz

We need to find the wavelength of the infrared radiation.

We know that,

[tex]\lambda=\dfrac{c}{f}\\\\\lambda=\dfrac{3\times 10^8}{4.39\times 10^{12}}\\\\=6.83\times 10^{-5}\ m[/tex]

So, the wavelength of the infrared radiation is [tex]6.83\times 10^{-5}\ m[/tex].

Answer:

I could not find the answer or do it myself if I did find it I would defenetly share

Answer:

act or process of measuring

Explanation:

Explanation:

the comparison of an unknown quantity with a known quantity.

Answer:

(d)

Explanation:

because dU = Q -W so ,that the option d(D) is correct

Explanation:

Let T is the period of a pendulum. The SI unit of time is seconds (s).

It depends on the acceleration of gravity, g, and the length of the pendulum, l.

The SI unit of acceleration of gravity, g and the length of the pendulum, l are m/s² and m respectively.

If we divide m and m/s², we left with s². If the square root of s² is taken, we get s only i.e. the SI unit of period of a pendulum.

So,

[tex]T\propto \sqrt{\dfrac{l}{g}}[/tex]

Hence, this is the required solution.

Answer:

Block A velocity is 23.33 m/s and the collission is not elastic.

Explanation:

a) m1v1 + m2v2 = m1v1' + m2v2'

Plug in givens

90+60=3v1'+80

solve for v1'= 23.33m/s

b) Find the initial and final kinetic energy of Block B

Ki= 1/2(4)(15)^2 + 1/2(3)(30)^2 = 1800 J

Kf= 1/2(4)(20)^2 + 1/2(3)*(23.33)^2= 1616.433J

Since Ki does not equal Kf the collision is not elastic

Answer:

Explanation:

English alphabets numbered fro 1 to 26

and the numbers 1 to10 so they are written in roman numbers as

1 - I

2 - II

3 - III

4 - IV

5 -V

6 - VI

7 -VII

8 - VIII

9 - IX

10 -X

11 - XI

12 - XII

13 - XIII

14 - XIV

15 - XV

16 - XVI

17 - XVII

18 - XVIII

19 - XIX

20- XX

21 - XXI

22 - XXII

23 - XXIII

24 - XXIV

25 - XXV

26 - XXVI  

If both forces are measured in Newtons, then the net force is

F = (18, 7, -12) N + (16, -10, 16) N = (34, -3, 4) N

The toolbox undergoes a displacement (i.e. change in position) in the direction of the vector

d = (17, 14, -1) m - (15, 14, -8) m = (2, 0, -9) m

The total work done by the astronauts on the toolbox is then

F • d = (34, -3, 4) N • (2, 0, -9) m = (68 + 0 - 36) N•m = 32 J

The work done by the two astronauts is equal to 96 J.

work done?Work done is defined as the product of force applied and the distance moved by the force.

The forces applied = 18+16 N, 7+ -10 N, and -12 + 16N

Forces = 34 N, -3 N, and 4N

Distances = (17 - 15, 14 - 14, -1 - - 8) m

Distances = 2, 0, 7

Work done = 34 × 2 + -3 × 0 + 4 × 7

Work done = 96 J

Therefore, the work done by the two astronauts is equal to 96 J.

Learn more about work done at: https://brainly.com/question/25573309

#SPJ6

Answer:

x ’= 368.61 m,  y ’= 258.11 m

Explanation:

To solve this problem we must find the projections of the point on the new vectors of the rotated system  θ = 35º

            x’= R cos 35

            y’= R sin 35

The modulus vector can be found using the Pythagorean theorem

            R² = x² + y²

            R = 450 m

we calculate

            x ’= 450 cos 35

            x ’= 368.61 m

            y ’= 450 sin 35

            y ’= 258.11 m

Answer:

For example, the pressure acting on a dam at the bottom of a reservoir is ... pressure = height of column × density of the liquid × gravitational field ... The density of water is 1,000 kg/m 3.

Answer:

stress = 98000 N/m^2

strain = 3.92 x 10^-6

change in height = 0.0196 mm

Explanation:

Height, h = 5 m

Area, A = 3 m²

mass, m = 30000 kg

Stress is defined as the force per  unit area.

[tex]stress = \frac{mg}{A}\\\\stress = \frac{30000\times 9.8}{3}\\\\stress = 98000 N/m^2[/tex]

Young's modulus of concrete is Y = 2.5 x 10^10 N/m^2

Young's modulus is defined as the ratio of stress to the strain.

[tex]Y = \frac{stress}{strain}\\\\2.5\times 10^{10}= \frac{98000}{strain}\\\\strain = 3.92\times 10^{-6}[/tex]

let the change in height is h'.

Strain is defined as the ratio of change in height to the original height.

[tex]3.92\times 10^{-6} = \frac{h'}{5}\\\\h' = 1.96\times 10^{-5}m = 0.0196 mm[/tex]

Answer:

Option (c)

Explanation:

1.The transformer core is assembled from steel sheets to:

(a) Reduced power loss due to eddy current

(b) Reduced power loss due to hysteresis

(c) Reduced power loss due to current flowing through the winding

(d) Reduce all types of power loss.

A transformer is a device which converts the low voltage into high and vice  versa.

There are two types of a transformer.

Step up: It is used to convert low voltage into high.

Step down It is used to convert high voltage into high.

It depends on the number of turns in primary and the secondary coil.

The core of the transformer is laminated and it is in the form of sheets.

By using such type of core, the power loss due to the windings is reduced.

option (c) .

Answer:

1. 588 N

2. 738 N

3. 588 N

Explanation:

time, t = 4 s

initial velocity, u = 0

final velocity, v = 10 m/s

mass, m= 60 kg

1.

Weight of passenger before starts

W =m g = 60 x 9.8 = 588 N

2.

When the elevator is speeding up

v = u + a t

10 = 0 + a x 4

a = 2.5 m/s2

Now the weight is

W' = m (a + g) = 60 (9.8 + 2.5) = 738 N

3.

When he reaches the cruising speed, the weight is

W = 588 N

Distance travelled by a body in unit time is called speed. it is a scalar quantity because it can be specified only by magnitude.

Answer:

They established the laws of planetary motion. They explained how the Sun rises and sets. They made astronomy accessible to people who spoke Italian.

Explanation:

Answer:

Let's define t = 0s (the initial time) as the moment when Car A starts moving.

Let's find the movement equations of each car.

A:

We know that Car A accelerations with a constant acceleration of 5m/s^2

Then the acceleration equation is:

[tex]A_a(t) = 5m/s^2[/tex]

To get the velocity, we integrate over time:

[tex]V_a(t) = (5m/s^2)*t + V_0[/tex]

Where V₀ is the initial velocity of Car A, we know that it starts at rest, so V₀ = 0m/s, the velocity equation is then:

[tex]V_a(t) = (5m/s^2)*t[/tex]

To get the position equation we integrate again over time:

[tex]P_a(t) = 0.5*(5m/s^2)*t^2 + P_0[/tex]

Where P₀ is the initial position of the Car A, we can define P₀ = 0m, then the position equation is:

[tex]P_a(t) = 0.5*(5m/s^2)*t^2[/tex]

Now let's find the equations for car B.

We know that Car B does not accelerate, then it has a constant velocity given by:

[tex]V_b(t) =20m/s[/tex]

To get the position equation, we can integrate:

[tex]P_b(t) = (20m/s)*t + P_0[/tex]

This time P₀ is the initial position of Car B, we know that it starts 100m ahead from car A, then P₀ = 100m, the position equation is:

[tex]P_b(t) = (20m/s)*t + 100m[/tex]

Now we can answer this:

1) The two cars will meet when their position equations are equal, so we must have:

[tex]P_a(t) = P_b(t)[/tex]

We can solve this for t.

[tex]0.5*(5m/s^2)*t^2 = (20m/s)*t + 100m\\(2.5 m/s^2)*t^2 - (20m/s)*t - 100m = 0[/tex]

This is a quadratic equation, the solutions are given by the Bhaskara's formula:

[tex]t = \frac{-(-20m/s) \pm \sqrt{(-20m/s)^2 - 4*(2.5m/s^2)*(-100m)} }{2*2.5m/s^2} = \frac{20m/s \pm 37.42 m/s}{5m/s^2}[/tex]

We only care for the positive solution, which is:

[tex]t = \frac{20m/s + 37.42 m/s}{5m/s^2} = 11.48 s[/tex]

Car A reaches Car B after 11.48 seconds.

2) How far does car A travel before the two cars meet?

Here we only need to evaluate the position equation for Car A in t = 11.48s:

[tex]P_a(11.48s) = 0.5*(5m/s^2)*(11.48s)^2 = 329.48 m[/tex]

3) What is the velocity of car B when the two cars meet?

Car B is not accelerating, so its velocity does not change, then the velocity of Car B when the two cars meet is 20m/s

4)  What is the velocity of car A when the two cars meet?

Here we need to evaluate the velocity equation for Car A at t = 11.48s

[tex]V_a(t) = (5m/s^2)*11.48s = 57.4 m/s[/tex]

Answer:

Centripetal Acceleration 18.75 m/s^2, Rotational Kinetic Energy 843.75 J

Explanation:

a Linear acceleration (we cant find tangential acceleration with the givens so we will find centripetal)

a= ω^2*r

ω= 300rev/min

convert into rev/s

300/60= 5rev/s

a= 18.75m/s^2

b) use Krot= 1/2 Iω^2

plug in gives

1/2(30*2.25)(25)= 843.75 J

Answer:

hope it helps

much as you can

Explanation:

a) photovoltaic cell is a semiconductor device and it converts light energy to electrical energy

b) burning of coal converts chemical energy to heat energy

c) rubbing of both hands against each other converts mechanical to heat energy

Answer:

a. solar cells

b.coal,wood,petroleum

c.rubbing ours palms

Answer:

No, it will not affect the results.

Explanation:

For elastic collisions in an isolated system, when a collision occurs, it means that the systems objects total momentum will be conserved under the condition that there will be no net external forces that act upon the objects.

What that means is that if the pucks start spinning after the collision, we are not told that there was any net external force acting on the puck and thus momentum will be conserved because momentum before collision will be equal to the momentum after the collision.

Answer:

Its the Federal government

Complete question:

A transverse wave on a rope is given by [tex]y \ (x, \ t) = (0.75 \ cm) \ cos \ \pi[(0.400 \ cm^{-1}) x + (250 \ s^{-1})t][/tex]. The mass per unit length of the rope is 0.0500 kg/m. Find the tension. Express your answer in newtons.

Answer:

The tension on the rope is 1.95 N

Explanation:

The general equation of a progressive wave is given as;

[tex]y \ (x,t) = A \ cos(kx \ + \omega t)[/tex]

Compare the given equation with the general equation of wave, the following parameters will be deduced.

A = 0.75 cm

k = 0.400π cm⁻¹

ω = 250π s⁻¹

The frequency of the wave is calculated as;

ω = 2πf

2πf = 250π

2f = 250

f = 250/2

f = 125 Hz

The wavelength of the wave is calculated as;

[tex]\lambda = \frac{2\pi}{k} \\\\\lambda = \frac{2\pi }{0.4 \pi} = 5 \ cm = 0.05 \ m[/tex]

The velocity of the wave is calculated as;

v = fλ

v = 125 x 0.05

v = 6.25 m/s

The tension on the rope is calculated as;

[tex]v = \sqrt{\frac{T}{\mu}} \\\\where;\\\\T \ is \ the \ tension \ of \ the \ rope\\\\\mu \ is \ the \ mass \ per \ unit \ length = 0.05 \ kg/m\\\\v^2 = \frac{T}{\mu} \\\\T = v^2 \mu\\\\T = (6.25)^2\times (0.05)\\\\T = 1.95 \ N[/tex]

Therefore, the tension on the rope is 1.95 N

Answer:

The answer to this question is plasma

Answer:

Plasma

Explanation:

Answer:

In 1 second the amount of charge flowing through the conductor is 2.5 Q.

Explanation:

Energy = (power) x (time)

Energy = (0.69 W) x (0.36 sec)

Energy = 0.25 Joule

Answer:

you can measure by scale beacause we dont no sorry i cant help u but u can ask me some other Q