The maximum speedup we would expect is S = P x log (N), where P is the number of processors and N is the input size.
In order to achieve the maximum speedup, all processors must be used efficiently with no communication overhead or synchronization issues.
What is maximum speedup with examples?The maximum speedup that can be achieved is limited by the laws of physics. In general, the maximum speedup is equal to the number of processors working in parallel. For example, if a task is run on a single processor, the maximum speedup that can be achieved is 1x. If the same task is run on two processors in parallel, the maximum speedup is 2x. The maximum speedup can be further increased by increasing the number of processors, but only up to a certain point. Beyond this point, the speedup decreases due to communication overhead and synchronization delays. In addition, other factors such as memory bandwidth, efficiency of the algorithms, and the nature of the data can also affect the maximum speedup. Therefore, the maximum speedup can vary depending on the task, the hardware, and the algorithms used.To learn more about maximum speedup refer to:
https://brainly.com/question/29990951
#SPJ4
ambrose is testing his it department's new firewall deployment. he is using a collection of applications that employ a brute-force technique to craft packets and other forms of input directed toward a target. what is this collection of tools called?
Packet Filtering Firewall is responsible for filtering the packets based on the IP addresses source and destination port numbers and also the source and destination protocols.
What is information security?Information security can be defined as a preventive practice which is typically used to protect an information system (IS) that use, store or transmit information, from potential theft, attack, damage, or unauthorized access, especially through the use of a body of technologies, encryption, firewalls, frameworks, processes and network engineers.A firewall can be defined as a network security protocol that monitors and controls inbound and outbound traffic based on set aside security rules.In Computer technology, a firewall is used to control access to a computer or network, as it creates a barrier between a computer or a network and the internet in order to protect against unauthorized access.Therefore, the other functionality which would influence a decision to deploy a stateless, rather than stateful, firewall are:Block TCP portsAllow network protocols.
To learn more about firewall refer to:
https://brainly.com/question/16157439
#SPJ4
Finish the code for this bubble sort. Length = len(mylist) for n in range(length - 1): for test in range(n + 1, length): if mylist[n] mylist[test]: temp = mylist[n] mylist[n] = mylist [test] mylist[test] = temp print(mylist).
Note that the missing character is ">". This is to be inserted in the fourth line as follows: "if myList[n] > myList[test]:" With this, the code for the bubble sort is complete.
What is a bubble sort?Bubble sort, commonly referred to as sinking sort, is a basic sorting algorithm that continually moves through the input list element by element, comparing the current element with the one following it, exchanging their values if needed.
The term "responsibility" refers to the act of determining whether or not a person is responsible for his or her own actions. Just to the movement of air bubbles in the water that rise up to the surface, each element of the array migrate to the end in each iteration. As a result, it is known as a bubble sort.
One of the primary benefits of a bubble sort is that it is a simple algorithm to describe to a computer. There is just one duty to do (compare two values and, if needed, swap them). This results in a very tiny and straightforward computer application.
Learn more about bubble sort:
https://brainly.com/question/18686944
#SPJ1
Which function is used to display information to the screen in Python? (5 points)
print()
main()
run =
show[]
The print() function prints the specified message to the screen, or other standard output device. The message can be a string, or any other object, the object will be converted into a string before written to the screen.
Which Python function is used to display information to the user?In Python, Using the input() function, we take input from a user, and using the print() function, we display output on the screen. Using the input() function, users can give any information to the application in the strings or numbers format.
Which command is used to display answers Python?The print command is used when you want to make the computer display things. The reason you haven't needed it before is that when you type it something that has an answer Python can work out, it automatically displays that answer.
To know more about string visit :-
https://brainly.com/question/27832355
#SPJ1
when sending a group email how do you ensure that one or several recipients cannot see the names?
The most popular way for sending emails to several recipients without hiding all of their email addresses is BCC (Blind Carbon Copy). The BCC feature allows you to send emails to numerous recipients while hiding other recipients from the receiver, giving the impression that you are the only one receiving the email.
How can I send emails in bulk without other recipients seeing my Outlook?
Click on the "Options" tab in Outlook when you open a brand-new, blank email. The Bcc field in the message header should then be selected. With this "blind carbon copy" option, your email recipients won't be able to view the other names on the list.
How do I send each person in a group email?
Write the message you want to send to your contact list in a new email that you have opened. In the top-right corner of your compose window, click BCC. Include every email address that you want to send the message to. Copying and pasting your list into this field might be helpful.
To know more about Blind Carbon Copy visit;
https://brainly.com/question/1384709
#SPJ4
java name format many documents use a specific format for a person's name. write a program whose input is: firstname middlename lastname and whose output is: lastname, firstinitial.middleinitial.
The following program are:
import java.util.Scanner;
public class NameFormat {
public static void main(String[] args) {
Scanner scanner = new Scanner(System.in);
System.out.println("Enter firstname, middlename, lastname: ");
String name = scanner.nextLine();
String[] nameSplit = name.split("\\s+");
String firstName = nameSplit[0];
String middleName = nameSplit[1];
String lastName = nameSplit[2];
String outputName = lastName + ", " + firstName.charAt(0) + "." + middleName.charAt(0) + ".";
System.out.println(outputName);
}
}
What is java?Java is designed to be platform independent and can run on almost any operating system. Java is widely used to create applications, applets, and web-based content. It is also used in a variety of server-side applications and mobile applications. Java is easy to learn for those with a basic knowledge of programming, and it can be used to develop large and complex applications.
Java is secure, reliable, and efficient, making it a popular choice for developers. It has a large library of libraries and tools that can be used to create complex applications quickly and easily. Java is also used to create web applications, as it is easy to deploy, secure, and debug. Java is also used for game development, as it is fast, reliable, and has advanced graphics capabilities.
To learn more about java
https://brainly.com/question/26789430
#SPJ4
Issue: How to fix "Application failed to start because no Qt platform plugin could be initialized" error in Windows?Recently, after a Windows update, I was unable to get OneDrive to work. Whenever my PC boots, I receive an error "Application failed to start because no Qt platform plugin could be initialized." Any advice on how to deal with this issue?
Many applications, including OneDrive, Designer, Python, etc., might provide the "this programme failed to start because no Qt platform plugin could be initialized" issue. Issue solved after successful window update.
How to Fix the “No Qt Platform Plugin Could Be Initialized” Error?Third-party software conflicts are one of the potential causes of the "this programme failed to start Qt platform Windows" issue. You can conduct a clean boot if you're not sure which programme is creating the dispute (click on the Hyperlink to know the detailed steps). Uninstall the conflicting software once you've identified it, then check to see if the issue has been resolved.When your programmes are operating, damaged system files might occasionally result in a number of errors and problems, including the "no Qt platform plugin could be initialised" error. To verify system files, we advise you to conduct an SFC scan or DISM.Reinstalling the application may assist in resolving the issue, as the error notice suggests.Learn more about clean boot refer to :
https://brainly.com/question/28082089
#SPJ4
if a hash table's array is resized to reduce collisions, what must be done to the existing values already in the table? if a hash table's array is resized to reduce collisions, what must be done to the existing values already in the table? all items must be copied over to the same indices in the new array. all n items must be copied over to fill the first n elements of the new array.
selecting a new hashing algorithm to account for the expanded size, generating a hash table of the new size, iterating through the components of the previous table, and adding them to the new table.
How does a Hashtable resize?The predicted number of collisions will be cut in half by doubling the table's size. The latter tactic results in a significant attribute of hash tables that we have not observed in any other data structure.
A particular linked list must contain the element you want to store in the hash table. In the event of a collision (i.e., when two distinct elements share the same hash value), both elements should be stored in the same linked list.
A hash table can be resized by selecting a new hash function to map to the new size, establishing a hash table of the new size, iterating through the components of the old table, and then inserting them into the new table.
To learn more about hash table refer to:
https://brainly.com/question/29510384
#SPJ4
the root-partition: a. contains an operating system kernel and it is not necessary to be mounted. b. contains an operating system kernel and it is mounted during boot time. c. contains a list of the operating systems which may be booted. d. does not contain the operating system kernel, but it is the first mounted file system during the boot time.
The root-partition contains an operating system kernel and it is mounted during boot time.
What is stored on the root partition?Within the Windows Hyper-V virtualization environment, a particular kind of partition called a root partition is in charge of executing the hypervisor. The root partition controls the machine-level activities of the hypervisor and any produced virtual machines, as well as the execution of the main hypervisor software.The hierarchical file tree starts at the root file system. The device directory and programs used to start the system are among the files and directories that are essential for system operation. The disk partition containing the operating system folder, sometimes referred to as the system root or %systemroot% in Windows NT, is known as the boot partition (or boot volume).To learn more about root-partition refer to:
https://brainly.com/question/29761826
#SPJ4
which of the following is true about interfaces and abstract classes? group of answer choices an interface cannot have default methods whereas an abstract class can. an interface cannot have instance variables whereas an abstract class can. an interface can specify static methods whereas an abstract class cannot. an interface cannot be instantiated whereas an abstract class can.
Unlike an abstract class, which a class may only inherit from once, an interface allows a class to implement many interfaces.
What do Java interfaces do?Java interfaces provide an abstract type to describe the behavior of a class. Java interfaces provide an abstract type to describe the behavior of a class. Abstract, flexibility, and numerous inheritance are enabled by this technology because they are fundamental ideas in Java. Java uses interfaces to achieve abstraction.
A user interface or an API?An API is an ui for developers that is fundamentally identical to a command-line user interface, graphical interface, or other interface that a person (the "user") is supposed to use.
To know more about interfaces visit:
https://brainly.com/question/29834477
#SPJ4
if you have multiple classes in your program that have implemented the same interface in different ways, how is the correct method executed? group of answer choices the compiler must determine which method implementation to use. the java virtual machine must locate the correct method by looking at the class of the actual object. you cannot have multiple classes in the same program with different implementations of the same interface. the method must be qualified with the class name to determine the correct method.
In order to execute the correct method, the compiler must determine which method implementation to use.
What is implementation?Implementation is the process of putting a plan, policy, program, or system into effect. It is the action that must be taken to carry out a policy, plan, program, or system. Implementation involves the coordination and completion of many different activities, including planning, preparing, and executing the plan. Implementation requires the commitment and collaboration of multiple stakeholders and is often a complex and multi-stage process.
This is usually done by looking at the class of the actual object and then finding the method that corresponds to that object. To make sure that the correct method is executed, the method must be qualified with the class name. It is not possible to have multiple classes in the same program with different implementations of the same interface.
To know more about implementation click-
https://brainly.com/question/29439008
#SPJ4
to refer to a particular location or element in the array, we specify the name of the array and the of the particular element in a. size b. contents c. type d. subscript
We use the array's name and the specific element's subscript to refer to a specific place or element in the array.
Explain what an array is.An array is a collection of elements of the same type that are kept in close proximity to one another in memory and may be individually referred to using an index to a unique identifier when declaring an array of five int values, there is no requirement to define five separate variables (each with its own identifier).
What actual-world examples of arrays are there?The following are some examples of arrays in real life:
Postal boxes, book pages, egg cartons, chess/checkerboards, and postage stamps
To know more about array visit:
https://brainly.com/question/19570024
#SPJ4
blunk is a service that allows users to send updates through posts that contain only a few words. these updates are sent to the users who have signed up to receive them. blunk can be regarded as a(n) .
The help of the service Blunk, users may share updates via posts just with a few words. Users who have subscribed to receive these updates are informed about them. Blunk is equal to a microblog.
What does the term "user" mean?A users is anyone who employs or makes use of a certain object, such as a smoker or a website user. You are a Vocabulary.com user if you are reading this. Congrats! A user is one who employs or makes use of something, which is what it means to utilize something.
What does a relationship user look like?It indicates that one individual is consuming overly whilst the other is giving everything. — Dr. Meghan Marcum The relationship's power dynamics are thrown off by it. Both partners would be in charge of giving their partner assistance, trust, and emotional safety in a healthy relationship.
To know more about User visit :
https://brainly.com/question/13122952
#SPJ4
Choose the correct term for each type of software.
software manages the hardware and software on a computer. Without this software, the computer
would not be functional.
software allows users to complete tasks and be productive. Examples of this software include
browsers, word processors, and video editors.
software allows programmers to create the software and utilities used on computers.
The correct term for each type of software may include is as follows:
An operating system is a type of software that manages the hardware and software on a computer. Without this software, the computer would not be functional.System software is a type of software that allows users to complete tasks and be productive. Examples of this software include browsers, word processors, and video editors.Application software allows programmers to create the software and utilities used on computers.What do you mean by Software?Software may be defined as a set and collection of instructions, data, or programs that are used to operate computers and execute specific tasks.
It is the opposite of hardware, which describes the physical aspects of a computer. Software is a generic term used to refer to applications, scripts, and programs that run on a device.
An operating system is software that controls and coordinates the computer hardware devices and runs other software and applications on a computer. It is the main part of system software and a computer will not function without it.
Therefore, the correct term for each type of software may include is well-mentioned above.
To learn more about Software, refer to the link:
https://brainly.com/question/28224061
#SPJ1
a- the stored procedure will be named updateproductprice b- add 2 parameters. call the first one inproductid with a data type of smallint and the second one insalesprice with a data type of decimal(7,2). c- type start transaction; , hit enter a few times, and type commit; d- inside the transaction, write the command to update the salesprice column in the products table equal to the value of the insalesprice parameter.
Accept input data and give the calling process or batch numerous values in the shape of output parameters.
What categories of commands are there?The three primary categories of commands are. commands in the programming languages DCL (Data Control Language), Dtd (Data Definition Language), and DML (Data Manipulation Language).
Describe a command example.The components of command words are what we call "imperative verbs." As they command someone to do something, these are also referred to as "bossy verbs." For instance, the directive "Eat your food" utilizes the urgent verb eat. We refer to a statement as an imperative when an urgent verb is present.
To know more about command visit:
https://brainly.com/question/2681578
#SPJ4
a person without an id badge gains entry into one of our secured facilities by following a badged employee through a secure door. what type of unauthorized activity does this describe?
Tailgating. Tailgating can be a serious security risk, as it allows unauthorized individuals to enter a secured area without being properly screened or identified.
What is tailgating ?Tailgating, also known as "piggybacking," is a type of unauthorized access to a secured area by following someone who has legitimate access. In the scenario you described, an individual without an ID badge gains entry to a secured facility by following a badged employee through a secure door. This is an example of tailgating.It can also be difficult to detect, as the individual may appear to have legitimate access if they are following someone who does.To prevent tailgating, it is important to implement security measures such as access control systems, security cameras, and trained security personnel. It is also important to educate employees on the importance of not allowing others to follow them into secured areas and to report any suspicious activity to security.To learn more about security cameras refer :
https://brainly.com/question/29817931
#SPJ4
your laser printer keeps printing vertical black lines on its output pages. what is the most likely cause of the problem?
A used-up toner cartridge or a worn-out drum unit are the typical culprits for streaking. Drum units are consumables that only require replacement after 3 or 4 toners have been used. A separate toner and drum unit is not utilized by all printers.
What is a laser printer's drawback?
Unlike inkjet printers, which can print on a variety of papers, laser printers cannot. You can't put anything that is heat-sensitive through them. Simple graphics may be printed on home laser printers, but clean pictures are difficult. Choose an inkjet printer if you wish to print images.
Why would you use a laser printer?
Popular computer printers like laser printers use non-impact photocopier technology, which avoids damaging the paper with keys. A laser beam uses electrical charges to "draw" a document on a drum covered in selenium when a document is supplied to the printer.
To know more about Laser printer visit;
https://brainly.com/question/14783882
#SPJ4
assuming the size of the packets is equal, why the efficiency of pure aloha is worse than slotted aloha? a. because packets can collide partially without time boundaries in pure aloha, resulting in more collisions. b. because nodes in slotted aloha can detect collisions. c. because pure aloha has more empty slots without time synchronization.
The size of the packets is equal, the efficiency of pure aloha is worse than slotted aloha because packets can collide partially without time boundaries in pure aloha, resulting in more collisions
What is pure aloha?The original intent behind the ALOHA System was to offer radio communications with a systematically distinct designer engagement. With the use of this substitute technique, the system may decide when and where radio communications are more advantageous than wired ones. It made various networks' accessibility possible and made communication methods practicable.The initial implementation of ALOHA utilised a hub architecture with two separate frequencies, with the hub machine broadcasting packets to all clients on the outgoing channel and the various client computers transmitting data packets to the hub on the inbound channel. If the hub correctly received the data, a brief acknowledgment packet was delivered to the client; if the client did not get the acknowledgment after a brief delay, the client machine would automatically retransmit.To learn more about pure aloha refer to:
https://brainly.com/question/30001346
#SPJ4
what is the range of nice values that affect processes access to system resources? what nice value will give the application the most cpu time?
The default value of a process' nice value is 0, and it can vary from -20 (top importance) to +19 (lowest priority).
What does a CPU do?The microcontroller (CPU) is the component of the computer that receives and processes instructions (CPU). A CAD system's CPU may be thought of as its brain. It is made up of a controller, a number of registers, and an arithmetic logic unit unit (ALU). The CPU is known to as a "processor".
Why is the CPU so crucial?The CPU, which houses all the hardware required to process information, process data, and output results, is the body of a computer. The CPU is continually executing computer programs that give it instructions on which data too process and in what order. Without a CPU, we couldn't utilize a laptop to run programs.
To know more about CPU visit :
https://brainly.com/question/14836660
#SPJ4
the dns is a hierarchical naming system widely used on internet: a) explain how. the domain name space is subdivided and organized into zones b) explain how the resolution mechanism works. make sure to describe the role of root servers play in the process c) explain authoritative and non-authoritative responses from dns servers d) explain what are reverse dns lookups, and how they work
The domain name system, or DNS, is a hierarchical naming system that is frequently used on the internet to explain authoritative and non-authoritative responses from dns servers.
How is the DNS naming hierarchy implemented?A hierarchical, extremely extendable tree structure with each domain acting as a node serves as the foundation for the domain name system (DNS) structure. There are numerous layers in the internet domain namespace, such as the root level domains and top level domains (TLD).DNS servers transform domain names and URLs into computer-friendly IP addresses. They transform user input into something a computer can use to locate a webpage. DNS resolution is the name given to this process of translation and lookup.The domain name system, or DNS, is a hierarchical naming system that is frequently used on the internet to explain authoritative and non-authoritative responses from dns servers.To learn more about Tree structure refer to:
https://brainly.com/question/17218476
#SPJ4
a data analyst uses the annotate() function to create a text label for a plot. which attributes of the text can the analyst change by adding code to the argument of the annotate() function? select all that apply.
The attributes of the text that the analyst can change by adding code to the argument of the annotate() function are: A. Modify the text's font style.B. Adjust the text's size.C. Modify the text's colour.
What is the tag's attribute?Examples of characteristics that specify additional properties or qualities of the element are the width and height of an image. Attributes are always provided in the start tag (also known as the opening tag). Name-value pairs are the most common format for them. Always use quotation marks when referring to attribute values.As a result, "text attributes" refers to all of the font, style, alignment, and other formatting aspects related to a particular character or string of characters.The attributes of the text that the analyst can change by adding code to the argument of the annotate() function are: A. Modify the text's font style.B. Adjust the text's size.C. Modify the text's colour.To learn more about tag's attribute refer to:
https://brainly.com/question/28920102
#SPJ4
you are the desktop administrator for your company. you would like to manage the computers remotely using a tool with a graphical user interface (gui). which actions should you take to accomplish this? (select two. each answer is a possible solution.)
The actions you should take to accomplish :
Open Computer Management and connect to each remote computer.Establish a Remote Desktop connection to each computer.What is graphical user interface meant for?The GUI, or graphical user interface, is a sort of user interface that enables people to communicate with electronic devices using graphical symbols and auditory cues like main notation rather than text-based UIs, written command labels, or text navigation.An individual may communicate with a computer using symbols, visual metaphors, and pointing devices thanks to a programme called a graphical user interface (GUI).Reduce the amount of eye, hand, and other control motions you make. There should be no difficulty or friction while switching between different system controllers. The shortest possible navigation paths should be used. Eye movement across a screen should be clear and orderly.Learn more about graphical user interface refer to :
https://brainly.com/question/14758410
#SPJ4
Which of the following correctly describe cell
protection in spreadsheet software? Choose all
that apply.
O Cell protection is a security feature used to
limit changes and visibility of data.
The contents of an unlocked cell cannot be
modified.
By default, cells are locked and not hidden.
Once activated, cell protection is guaranteed.
With worksheet protection, you may restrict user access to only specific areas of the sheet, preventing them from editing data. Worksheet-level protection is not meant to be a security feature.
What does Excel's cell protection mean?Lock Particular Cells, After locking the cell, you must password-protect your document. In Excel, you must first unlock all of the cells before locking any particular cells. Choose every cell.
What are Excel's three protection options?The three basic methods for securing an Excel sheet against theft or limiting modification options are: encrypting the workbook using Microsoft Excel's password protection feature; exporting the Excel workbook to a PDF file; and securing the workbook with a structural password.
to know more about spreadsheet software here:
brainly.com/question/1383473
#SPJ1
Answer: A & C
Explanation:
a malicious person is attempting to subvert a company's virtual private network (vpn). she is using a tool that creates tcp and udp network connections that can link to or from any port. what is this tool?
Since it shields the sent data from packet sniffing, encryption is frequently regarded as being just as important as authentication. Secret (or private) key encryption and public key encryption are the two encryption methods most frequently used in VPNs.
Which VPN protocol is utilized to safely link two workplaces or sites together?
Virtual private networks (VPNs) built into networks are used to safely link two networks together over an unreliable network. One typical illustration is an IPsec-based WAN, in which all of a company's offices connect to one another via the internet using IPsec tunnels.
How is the communication between an on-premises VPN device and an Azure VPN configured?
Between an Azure virtual network and an on-premises location, VPN Gateway transmits encrypted data over the open Internet. Additionally, you can utilize VPN Gateway to transmit encrypted data via the Microsoft network between Azure virtual networks.
To know more about VPN visit;
https://brainly.com/question/29432190
#SPJ4
what tool translates java source code into files that contain instructions for the java virtual machine? group of answer choices compiler linker interpreter assembler
Java source code is converted by a compiler into files with commands again for Java virtual machine.
What is a Java Virtual Machine used for?Both JDK and JRE require JVM, which is specifically in charge of turning bytecode into machine-specific code. Additionally platform-dependent, it carries out a variety of tasks, such as memory security and management.
What distinguishes Java from the Java Virtual Machine?The Java Virtual Machine (JVM) serves as an operated engine for Java programs. The JVM is the component that really invokes a Java program's main function. JRE incorporates JVM (Java Runtime Environment). Java programs are referred to as Costs can be significant (Write Once Run Anywhere).
To know more about java virtual machine visit:
https://brainly.com/question/18266620
#SPJ4
You have been asked to join a team that is responsible for creating a handbook that outlines appropriate employee correspondence. Give two examples of topics that you would include in the manual along with why you think it would be important to include them.
Two examples of topics that would be included in the manual are the service provided by the company and the papers provided by the employee.
What is employee correspondence?During a job search, a series of written communications is typically required. Both parties anticipate this crucial discussion between the applicant and the employer.
A thorough series of letters and other paperwork are typically prompted by an employer's positive response. There is very little room for a surprise with proper documentation.
Therefore, the service offered by the business and the documents supplied by the employee are two examples of topics that would be covered in the manual.
To learn more about employee correspondence, refer to the below link:
https://brainly.com/question/28162514
#SPJ1
true or false: the following statement might plausibly appear as a functional requirement: the system shall compute a student's gpa by dividing the total grade points for the prior semester by the total credits for that semester, omitting from those totals any courses assigned a grade that does not affect the gpa.
Removing any courses with grades that have no impact on GPA from those totals. This assertion is accurate.
A functional requirement is what?The functionality of a system or one of its subsystems is specified in a functional requirement document. The kind of program, anticipated users, and system type where the software is used are further factors. Functional system requirements should also explicitly specify the system services in detail. Functional user needs may be high-level declarations of what the system should be able to achieve.
What distinguishes non-functional requirements from testing?Performance, stress, and security testing are all types of testing. Non-functional requirements are less liked than functional ones, and if they are not met, the entire system is useless.
To learn more about GPA visit:
brainly.com/question/1686355
#SPJ4
Kristy just received a laptop from her employer so she can work from home. She wonders if she can also use the laptop for personal activity, such as streaming movies. What documentation should Kristy check to find the answer to her question?
A. Acceptable use policy (AUP)
B. Knowledge base
C. Code of conduct
D. Warranty
Answer:
A
Explanation:
Acceptable use policy
maybe
T/F By default margins are set to Narrow Margins.
True
O False
By default margins are set to Narrow Margins is false.
What are margins in writing?It is not necessarily true that margins are set to narrow by default in all software or applications. The default margin settings can vary depending on the specific software or application being used, as well as the user's preferences and settings.
In some cases, the default margin setting may be narrow, while in other cases it may be wider. It is generally a good idea to check the margin settings in the software or application that you are using to ensure that they are set to your desired width. If you need to change the margin settings, you can usually do so by accessing the "Page Setup" or "Print" options in the software or application's menu.
Learn more about margins from
https://brainly.com/question/28579662
#SPJ1
what is the term used to describe unwanted software that installs along with downloaded software?
Answer:
Malware is a catch-all term for various malicious software, including viruses, adware, spyware, browser hijacking software, and fake security software.
Explanation:
Hi,
My friend has failed in Hindi but got good marks in IT (6th optional subject) and passed other subject with good marks will he be considered pass or fail.
He is studying in the year 2022–2023
Please reply fast Thank you
