if salt and sand is mixed with distilled water, what will be the residue and what will be the filtrate?

Answers

Answer 1

Answer:

salt and sand

Explanation:it is what it is


Related Questions

For the following acids of varying concentrations, which are titrated with 0.50 M NaOH, rank the acids in order of least to most volume of base needed to completely neutralize the acid.

a. 0.2M H2C6H5O7
b. 0.2M H2C2O4

Answers

Answer:

0.2M H2C6H5O7 < 0.2M H2C2O4

Explanation:

A weak acid/base ionizes to a very small extent in water. Hence, if we say that a substance is a weak acid/base, its percentage of ionization in solution is very little.

More volume of a very weak acid is required to neutralize a strong base. Since NaOH is a strong base, the weaker acid among the duo will require more volume for neutralization.

Since H2C6H5O7 is a weaker acid than H2C2O4, equal concentration of the both acids will require less volume of H2C2O4 than H2C6H5O7 to neutralize 0.50 M NaOH.

H₂C₆H₅O₇ is a weaker acid than H₂C₂O₄, and will require the least volume of 0.50 M NaOH to be neutralized.

H₂C₆H₅O₇ < H₂C₂O₄

The strength of an acid is related to the value of its dissociation constant, Ka or its pKa (negative logarithm of Ka)

Strong acids have high Ka values or low pKa value, whereas weak acids have low Ka values and high pKa values.

Between two acids, the acid with a higher Ka or lower pKa values is the stronger acid.

Acids are classified as either strong or weak depending on how well it ionizes in solution to produce hydrogen ions.

Strong acids ionizes completely to produce hydrogen ions.

Weak acid ionizes partially to a varying degrees in water to produce hydrogen ions.

In neutralization reactions between acids and bases, stronger acids will require the most volume of base or alkali in order to be neutralized.

H₂C₂O₄ has a Ka value of 5.9 x 10⁻² and a pKa value of 1.23

H₂C₆H₅O₇ has a Ka value of 8.4 x 10⁻⁴ and a pKa value of 3.08

Hence H₂C₂O₄ is a stronger acid than H₂C₆H₅O₇

For equal molar concentrations of the two acids, H₂C₂O₄ will produce more hydrogen ions than H₂C₆H₅O₇, and thus, will require more volume base (0.50 M NaOH) to be neutralized.

learn more at: https://brainly.com/question/24229657

1. A
a stiff structure that surrounds and
protects a coll: found in plant, fungus, and some bacteria cells.
2.
is living things consisting of many cells.
3.
a green pigment that traps energy
from the sun.
the process in which plants and
some other organisms use the energy in sunlight to make food.
5. A
found in the nucleus of a cell,
a long nucleic acid molecule containing the genetic instructions
for the development and functioning of all living organisms.

Answers

Answer:

1 cell wall

2 yes

3 chloroplast

4 photosynthesis

5 Deoxyribonucleic acid (I believe)

hope this helped a little and pls mark brainiest if it did :)

Explanation:

The cell wall is a rigid layer that is found outside the cell membrane and surrounds the cell, providing structural support and protection.

11 Explain how you would obtain solid lead carbonate from a mixture of lead carbonate and sodium chloride

Answers

Explanation:

Add water, Na2CO3 dissolves, filter, PbCO3 stays in the paper and dissolved Na2CO3 goes through as the solution. Dry the PbCO3 and you have the dry solid.

OR

Add water to dissolve then filter to obtain PbCo3 as you're residue and Na2Co3 as the filtrate. Dry the insoluble PbCo3 between filter papers and you obtain solid PbCo3

An antacid tablet weighing 1.30g was fully neutralized at 42.00 mL(an excess amount) of 0.250MHCl. 10.00 mL of 0.100 M NaOH was then used to back titrate the excess HCl. How many moles of acid did the antacid neutralize

Answers

Answer:

0.0095 moles of acid were neutralized by the antiacid

Explanation:

The antiacid is a base that neutralize the acid in stomach. To find the moles of acid neutralized we need to find the moles of acid added initially. This acid is added in excess, then, the moles of NaOH added reacts to neutralize the moles of acid in excess. The difference between initial moles of HCl and moles of NaOH needed to titrate the excess = Moles of HCl that were neturalized by the antiacid as follows:

Moles HCl added:

42.00mL = 0.04200L * (0.250mol/L) = 0.0105 moles HCl

Moles NaOH to titrate the excess:

10.00mL = 0.01000L * (0.10mol/L) = 0.0010 moles NaOH = Moles HCl in excess.

Moles of acid that were neutralized:

0.0105 moles - 0.0010 moles =

0.0095 moles of acid were neutralized by the antiacid

A reaction rate increases by a factor of 500. in the presence of a catalyst at 37oC. The activation energy of the original pathway is 106 kJ/mol. What is the activation energy of the new pathway, all other factor being equal

Answers

Answer:

[tex]E_2=999984KJ/mole[/tex]

Explanation:

From the question we are told that:

Factor [tex]dK=500[/tex]

Temperature [tex]T=37 C=310k[/tex]

Activation energy [tex]E=10^6kJ/mol[/tex]

Generally the Arhenius equation is mathematically given by

[tex]ln \frac{K_2}{K_1}=\frac{ E_1-E_2}{RT}[/tex]

Where

[tex]\frac{K_2}{K_1}=500[/tex]

[tex]ln 500=\frac{ 10^6-10^3-E_2}{8.314*310}[/tex]

[tex]E_2=999984KJ/mole[/tex]

The activation energy of the new reaction is 105.99 kJ/mol.

Using the Arrhenius equation;

ln(k2/k1) = -Ea2/RT2 +  Ea1/RT1

Now, from the information in the question;

k2/k1 = 500

Ea = ?

R = 8.314 JKmol-1

T2 = 37oC + 273 = 310 K

T1 = 37oC + 273 = 310 K

Substituting values;

ln (500) =- Ea2 + Ea1

6.2 = -Ea2 + 106 × 10^3 J

Ea = 106 × 10^3 J - 6.2

Ea = 105.99 × 10^3 J  or 105.99 kJ/mol

Learn more about activation energy: https://brainly.com/question/11334504

1. Draw the condensed structural formula of sodium benzoate showing all charges, atoms including any lone pairs in the side chain functional group, and all sigma and pi bonds.
2. Draw the condensed structural formula of benzoic acid showing all atoms including any lone pairs in the side chain functional group, and all sigma and pi bonds. Indicate the acidic hydrogen.
3. Draw the condensed structural formula of tetrahydrofuran (THF) showing all heteroatoms plus their lone pairs and all sigma and pi bonds.

Answers

The structures are shown in the image attached.

A structural formula is the representation of the molecule in which all atoms and bonds in the molecule are shown.

Since the question requires that all the lone pairs, formal charges and sigma and pi bonds should be shown, then the simple condensed structural formula becomes insufficient in this case.

I have attached images of the structural formula of sodium benzoate (image 1), benzoic acid (image 2)  and tetrahydrofuran (image 3).

All the formal charges, lone pairs as well as sigma and pi bonds are fully shown.

https://brainly.com/question/9988658

Kevin's supervisor, Jill, has asked for an update on today's sales, Jill is pretty busy moving back and forth between different store locations. How can Kevin most effectively deliver an update to her ? a) Call with a quick update Ob ) Send a detailed text message c ) Book a one-hour meeting for tomorrow morning d) Send a detailed email

Answers

Answer:

d

Explanation:

since it is much convenient since the email will not get lost and it's contents will not be forgotten

2.5
Nakula investigated the effect of heat on amylase. Amylase is an enzyme
that makes starch molecules break down into sugar molecules.
P
• Nakula put some amylase solution into two boiling tubes,
P and Q
• He boiled the solution in tube P. He did not heat tube Q.
• He waited until the solution in tube P had cooled down to
room temperature.
• He added equal volumes of starch solution to tube P and
boiled amylase amylase
• After 10 minutes, he tested both tubes for sugar.
and starch and starch
• Nakula found that there was sugar in tube Q. but not in tube P.



Answers

The structure of amylase deteriorates due to high temperature of the solution.

This experiment shows that the structure of amylase deteriorates due to high temperature which prevents this amylase from performing its function properly.

At high temperatures the amylase will break starch down very slowly or not at all due to denaturation of the enzyme's active site due to which it can't perform its function properly so we can conclude that high temperature denatures amylase enzyme.

https://brainly.com/question/24323388

Nakula's conclusion was- "My results show that boiling destroys amylase"

Amylase is an enzyme that breaks down starch molecules into sugar molecules. He boiled the solution in tube P, and when he checked tube P for sugar, there wasn't any. He didn't boil the solution in tube Q and he found sugar in it.

Amylase had broken down starch molecules to sugar molecules in tube Q. Tube P's solution had been boiled, and this showed that when he boiled it, it destroyed the amylase, that is why the starch molecules hadn't been broken down into sugar molecules.

Calculate the molarity of a solution consisting of 65.5 g of K2S0 4 in 5.00 L of solution. ​

Answers

Answer:

Molarity is 0.075 M.

Explanation:

Moles:

[tex]{ \tt{ = \frac{65.5}{RFM} }}[/tex]

RFM of potassium sulphate :

[tex]{ \tt{ = (39 \times 2) + 32 + (16 \times 4)}} \\ = 174 \: g[/tex]

substitute:

[tex]{ \tt{moles = \frac{65.5}{174} = 0.376 \: moles}}[/tex]

In volume of 5.00 l:

[tex]{ \tt{5.00 \: l = 0.376 \: moles}} \\ { \tt{1 \: l = ( \frac{0.376}{5.00} ) \: moles}} \\ { \tt{molarity = 0.075 \: mol \: l {}^{ - 1} }}[/tex]

Van der Waals forces hold molecules together by: A. moving electrons from one molecule to another. B. attracting a lone pair of electrons to the positive charge of a hydrogen. C. inducing temporary dipoles that attract each other. D. sharing electrons between atoms.

Answers

Van der Waals forces hold molecules together by inducing temporary dipoles that attract each other. That is option C

Van Der Waals forces are example of those intermolecular forces which are weaker than ionic and covalent bonds that exists between molecules.

Van Der Waals forces was postulated by a Dutch physicist known as Van Der Waals. He postulated the existence of weak, short-range forces of attraction, which are independent of normal bonding forces, between non-polar molecules. He came to this conclusion after studying the  of real gases at low temperatures and high pressures that:

electrons in a non-polar molecule such as hydrogen are close to one nucleus as to the other, although momentary concentration at one end of the molecule may occur, this momentary concentration of electron cloud on one side create a temporary dipole in the hydrogen molecule, that is, one side of the molecule acquires a partial negative charge while the other side acquires a partial positive charge of equal magnitude, the temporary dipole induces a similar dipole in an adjacent behavior molecule, this results in a temporary dipole-induced dipole attraction between the positive and negative ends of the adjacent molecules.

This is how weak Van Der Waals forces are set up. Therefore, option C is CORRECT

Learn more here:

https://brainly.com/question/11457190

Sally has constructed a concentration cell to measure Ksp for MCln. She constructs the cell by adding 2 mL of 0.05 M M(NO3)n to one compartment of the microwell plate. She then makes a solution of MCln by adding KCl to M(NO3)n. She adds 7.903 mL of the resulting mixture to a second compartment of the microwell plate. Sally knows n = +2. She has already calculated [Mn+] in the prepared MCln solution using the Nernst equation. [Mn+] = 8.279 M

Required:
How many moles of [Cl-] must be dissolved in that compartment?

Answers

Answer:

0.1309 mol

Explanation:

From the given information:

The metal ion, two ions of [tex]M^{+}[/tex] reacted with Cl⁻ to form [tex]MCl_n[/tex] i.e. the compound formed is [tex]MCl_2[/tex].

The concentration of the metal ion formed [tex][M^+][/tex] = 8.279 M

The concentration of the chlorine ion formed [tex][Cl^-][/tex] = 2 × 8.279 M

= 16.558 M

We know that:

[tex]\mathsf{Molarity = \dfrac{no \ of \ moles }{volume (mL)}}[/tex]

The number of moles of [tex][Cl^-][/tex] = [tex]16.558 \ mol.L^{-1} \times 7.903 \ mL \times \dfrac{1 \ L}{1000 \ mL}[/tex]

= 0.1309 mol

Another method for creating a buffer, in situ, is to add an appropriate amount of a strong base, e.g., NaOH, to a weak acid OR add an appropriate amount of a strong acid, e.g., HNO3, to a weak base. As an example, mixing 1.0 mol of acetic acid with 0.5 mol of NaOH will result in a buffer solution with 0.5 mol of acetic acid and 0.5 mol of acetate. The acetate is created by the reaction of acetic acid and the strong base, hydroxide. Given this information, which of the following, when mixed with the appropriate amount of HCl, would create a buffer solution?

a. HNO3
b. HClO2
c. LiCl
d. NH3

Answers

Answer:

As an example, mixing 1.0 mol of acetic acid with 0.5 mol of NaOH will result in a buffer solution with 0.5 mol of acetic acid and 0.5 mol of acetate. The acetate is created by the reaction of acetic acid and the strong base, hydroxide.

When HClO2 is mixed with the appropriate amount of HCl it would create a buffer solution. That is option B.

Methods used to form buffer solution

A buffer solution is the solution that resists a change in pH of a solution when acid or base is added because it is made up of weak acid and the conjugate base or weak base and the conjugate acid.

The methods that can be used to form a buffer solution include:

Adding a strong base to a weak acid: For example, mixing 1.0 mol of acetic acid with 0.5 mol of NaOH will result in a buffer solution with 0.5 mol of acetic acid and 0.5 mol of acetate.

Adding a weak acid to a conjugate base: For example HCl is a strong acid which will react with a conjugate base such as HClO2.

Although HCl is a strong acid, it can be converted to a weak acid through dilution with water. It is in this context that it can be used to form a buffer solution.

Learn more about buffer solution here:

https://brainly.com/question/26416276

calculate the volume of 20.5g of oxygen occupied at standard temperature and pressure.what the volume​

Answers

Answer :

volume of a gas = weight * 22.4 l / gram molecular weight

volume of o2 = ?

weight given = 20.5 g

gram molecular weight of oxygen = 32 (because of 2 oxygen atoms )

volume of oxygen = 20.5 * 22.4 / 32

volume of oxygen = 14.35 liters  

Explanation:

hope this helps you

if wrong just correct me

what is the IUPAC name of 2NaOH(s)​

Answers

Answer:

NaoH= sodium hydroxide

Which phenomenon explained below is an example of deposition?
Select the correct answer below:

A) Hail is formed from water droplets lifted by air currents to an altitude where they turn into pellets of ice.

B) Frost forms when cold evening temperatures convert the humidity in the air to thin layers of ice on the ground.

C) In the winter, the top few inches of a pond turn to ice.

D) The visible cloud arising from a boiling tea kettle is not actually steam, but droplets of liquid water that form as the
steam cools in the air.

Answers

Answer:

b

Explanation:

deposition is when water turns from gas to solid. b is the only one that fits

Deposition is frost forms when cold evening temperatures convert the humidity in the air to thin layers of ice on the ground.

What is deposition?

Deposition is a process that involves collection of large mass or when mean distance between molecules are reduced. It can also be explained as gathering of substances together to form a larger mass.

Therefore, the phenomenon explained in the given example about deposition is frost forms when cold evening temperatures convert the humidity in the air to thin layers of ice on the ground.

Learn more about deposition here: https://brainly.com/question/6110024

Starting from (R)-3-methylhex-1-yne as the substrate at the center of your page, draw a reaction map showing the regiochemical and stereochemical outcome or outcomes for each of the following series of reagents. Name each of your products, including stereochemical designations for any chirality centers that are generated.

a. HgSO4, H2SO4, H2O
b. 1. 9-BBN; 2. H2O2, NaOH
c. Br2, CCl4
d. HBr

Answers

Solution :

A substrate is defined as the chemical species that are being observed in the chemical reaction where the substrate reacts with a reagent and forms a product. It can also be referred to the surface where some other chemical reactions are performed.

Stereochemistry is defined as the study of relative spatial arrangement of the atoms which forms the structure of the molecules and their respective manipulations.

In the context, the products including the stereochemical designations for any chirality centers starting from the  (R)-3-methylhex-1-yne as the substrate are attached below.  

Which statement describes the 3d, 4s, and 4p orbitals of Arsenic (As) based on its electronic configuration and position in the periodic table?
The 3d and 4s orbitals are completely filled, and the 4p orbital is partially filled.
The 3d orbital is completely filled, and the 4s and 4p orbitals are partially filled.
The 3d, 4s, and 4p orbitals are completely filled.
The 3d, 4s, and 4p orbitals are partially filled.

Answers

Answer:

The 3d and 4s orbitals are completely filled, and the 4p orbital is partially filled.

Explanation:

The correct answer is: The 3d and 4s orbitals are completely filled, and the 4p orbital is partially filled.

The d orbital contains 10 electrons, the s orbital takes 2 electrons and the p orbital takes six electrons.

The orbital in chemistry is defined as a region in space where there is a high probability of finding an electron. There are s, p, d, f orbitals in chemistry which correspond to sharp, principal, diffuse and fundamental.

The electronic configuration of arsenic is 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p3.

From this electronic configuration, we can see that the 4s and 3d orbitals are half filled while the 4p orbital is half filled.

For more about electronic configuration, see:

https://brainly.com/question/4949433

the nutrition label on rice lists the amounts of protein, carbohydrates and fats in one serving. these substances are important for human nutrition

Answers

Answer:

Carbohydrates, proteins, and fats are biological macromolecules that are made up of chemical elements which are inherent to chemistry.

Chemistry explain how these macromolecules are bonded together at the molecular level and give an explanation for their behavior.

Explanation:

Which one of the following is not matches the organelle with its function

Answers

Answer:

rip there isnt a photo

Explanation:

i do know a lot about cells tho lol

how many mols of nh4cl are present in 279.0ml of a 0.975 M nh4cl soution?

Answers

Answer:

how many mols of nh4cl are present in 279.0ml of a 0.975 M nh4cl soution?

Calculate the pH of each solution.
A. 0.18 M CH3NH2
B. 0.18 M CH3NH3Cl
C. a mixture of 0.18 M CH3NH2 and 0.18 M CH3NH3Cl

Answers

Answer:

See Explanations

Explanation:

pH =-log[H₃O⁺] = -log[H⁺]

pOH = -log[OH⁻]

For weak acids [H⁺] = SqrRt(Ka·[Acid])

For weak bases [OH⁻] = SqrRt(Kb·[Base])

pH + pOH = 14

__________________________________________

A. Given 0.18M CH₃NH₂; Kb = (4.4 x 10⁻⁴)* => pH = 11.95

CH₃NH₂ + H₂O => CH₃NH₃OH ⇄ CH₃NH₃⁺ + OH⁻;

[OH⁻]  = SqrRt(Kb·[weak base]) = SqrRt(4.4 x 10⁻⁴ x 0.18)M = 8.97 x 10⁻³M

=> pOH = -log[OH⁻] = -log(8.93x10⁻³) = -(-2.05) = 2.05

=> pH = 14 - pOH = 14 - 2.05 = 11.95.

*Kb values for most ammonia derivatives in water can be found online by searching 'Kb-values for weak bases'. Kb-values for methyl amine and methylammonium chloride are both 4.4x10⁻⁴.

___________________________________________________

B. Given 0.18M CH₃NH₃Cl

In water ... CH₃NH₃Cl => CH₃NH₃⁺ + Cl⁻; Kb(CH₃NH₃Cl) = 4.4 x 10⁻⁴

Cl⁻ + H₂O => No Rxn (i.e.; no hydrolysis occurs) ... Cl⁻ does not react with H₂O.

Hydrolysis Reaction of Methylammonium Ion:

CH₃NH₃⁺ + H₂O => CH₃NH₄OH ⇄ CH₃NH₄⁺ + OH⁻

Ka' x Kb = Kw => Ka' = Kw/Kb = 10⁻¹⁴/4.4 x 10⁻⁴ = 2.27 x 10⁻¹¹                                   Ka' = [CH₃NH₄⁺][OH⁻]/[CH₃NH₄OH] = (x)(x)/(0.18M) = (x²/0.18M) = 2.27 x 10⁻¹¹ => x = [OH⁻] = SqrRt(2.27x10⁻¹¹ x 0.18)M = 2.02 x 10⁻⁶M => pOH = -log(2.02 x 10⁻⁶) = -(-5.69) = 5.69 => pH = 14 - pOH = 14 - 5.69 = 8.31.

*note => the general nature of halide interactions would increase acidity (lower pH) of the halogenated compound.

C. A mixture of 0.18M CH₃NH₂ and 0.18M CH₃NH₃Cl          

Mixture of 0.18M CH₃NH₂ + 0.18M CH₃NH₃Cl

In Water ...

=> 0.18M CH₃NH₃OH + 0.18M CH₃NH₃Cl

=> 0.18M CH₃NH₃⁺ + 0.1M OH⁻ + 0.18M CH₃NH₃⁺ + 0.18M Cl⁻

=> 0.36M CH₃NH₃⁺ + 0.18M OH⁻ + 0.18M Cl⁻

-----------------------------------------------------------

Ka'(CH₃NH₃⁺) x Kb(CH₃NH₂) = Kw => Ka'(CH₃NH₃⁺) = Kw/Kb(CH₃NH₂)

=> Ka'(CH₃NH₃⁺) = (10⁻¹⁴/4.4x10⁻⁴) = 2.27x10⁻¹¹

----------------------------------------------------------

From the 0.36M CH₃NH₃⁺

=>       CH₃NH₃⁺ + H₂O  ⇄ CH₃NH₄⁺ + OH⁻

C(eq)   0.36M        ----              x             x     (<= at equilibrium after mixing)

Ka'(CH₃NH₃⁺) = [CH₃NH₄⁺][OH⁻]/[CH₃NH₃⁺] = x²/(0.36M)

=> x = [OH⁻] = SqrRt(Ka'(CH₃NH₃⁺)·0.36M) = SqrRt(2.27x10⁻¹¹/0.36) = 0.0126M

=> Total [OH⁻] = 0.0126M + 0.18M = 0.1926M from hydrolysis process

=> final solution mix is therefore, 0.1926M in OH⁻ + 0.18M in Cl⁻

--------------------------------------------------------

Cl⁻ + H₂O => No Rxn (Cl⁻ does not react with H₂O)The 0.1926M in OH⁻ => [H⁺] = Kw/[OH⁻] = (10⁻¹⁴/0.1926)M = 5.192 x 10⁻¹⁴M in H₃O⁺ ions (= H⁺ ions) ...

∴pH = -log[H⁺] = -log(5.192x10⁻¹⁴) = -(-13.29) = 13.29 for solution mix

The acid and base dissociation constant and the 0.18 M of CH₃NH₂ and

CH₃NH₃Cl and the mixture give the following approximate values;

A. The pH value of the 0.18 M CH₃NH₂ is 11.93

B. The pH value of the 0.18 M CH₃NH₃Cl is 5.69

C. The pH value of the mixture is 10.644

Which method can be used to calculate the pH values?

A. 0.18 M CH₃NH₂

The solution is presented as follows;

CH₃NH₂ + H₂O → CH₃NH₃⁺ + OH⁻

Let x represent the number of moles of CH₃NH₃⁺ and OH⁻ produced, we

have;

The number of moles of CH₃NH₂ remaining = 0.18 - x

Which gives;

[tex]K_b = \mathbf{\dfrac{[CH_3NH_3^+][OH^-]}{[CH_3NH_2]}}[/tex]

[tex]K_b[/tex] for CH₃NH₂ = 4.167 × 10⁻⁴

Therefore;

[tex]4.167 \times 10^{-4} = \mathbf{\dfrac{x \times x}{0.18 - x}}[/tex]

4.167 × 10⁻⁴ × (0.18 - x) = x²

4.167 × 10⁻⁴ × (0.18 - x) - x² = 0

Which gives;

x = [OH⁻] = 8.455 × 10⁻³

pH = 14 + log[OH⁻]

Which gives;

pH = 14 + log(8.455 × 10⁻³) ≈ 11.93

B.  0.18 M CH₃NH₃Cl

The solution is presented as follows;

CH₃NH₃⁺ → CH₃NH₂ + H⁺

Let x represent the number of moles of CH₃NH₂ and H⁺ produced,

respectively, we have;

The number of moles of CH₃NH₃⁺ remaining = 0.18 - x

Which gives;

[tex]K_a = \mathbf{\dfrac{[CH_3NH_2][H^+]}{[CH_3NH_3^+]}}[/tex]

Kₐ for CH₃NH₃Cl = 2.27 × 10⁻¹¹

Therefore;

[tex]2.27\times 10^{-11} = \dfrac{x \times x}{0.18 - x}[/tex]

2.27 × 10⁻¹¹ × (0.18 - x) = x²

2.27 × 10⁻¹¹ × (0.18 - x) - x² = 0

Which gives;

x = [H⁺] ≈ 2.02 × 10⁻⁶

pH = -log[H⁺]

Which gives;

pH = -log(2.02 × 10⁻⁶) ≈ 5.69

C. For the mixture of 0.18 M CH₃NH₂ and 0.18 M of CH₃NH₃Cl, we have;

Based on the Henderson-Hasselbalch equation, we have;

[tex]pH = \mathbf{ pKa + log\dfrac{[Conjugate \ base]}{[acid ]}}[/tex]

Which gives;

[tex]pH = -log\left(2.27 \times 10^{-11} \right)+ log\dfrac{0.18}{0.18} \approx \underline{10.644}[/tex]

Learn more about Henderson-Hasselbalch equation here:

https://brainly.com/question/13651361

Which redox reaction would most likely occur if silver and copper metal were added to a solution that contained silver and copper ions?
A. Cu + Agt Cu2+ + 2Ag
B. Cu2+ + 2Ag* → Cu + 2Ag
C. Cu2+ + 2Ag → Cu + 2Ag+
D. Cu + 2Ag Cu²+ + 2Ag+​


give the wrong answer and I'm reporting ​

Answers

Answer:

B

Explanation:

b/c copper is readuction agent

The most likely redox reaction that would occur if silver and copper metal were added to a solution that contained silver and copper ions is   [tex]\rm Cu^{2+} + 2Ag \rightarrow Cu + 2Ag^+[/tex]. The correct answer is option C.

Redox reaction is a reaction in which reduction and oxidation takes place simultaneously.

In this reaction:

[tex]\rm Cu^{2+} + 2Ag \rightarrow Cu + 2Ag^+[/tex]

Copper metal has a higher reduction potential than silver metal, which means that it will be oxidized to [tex]\rm Cu^{2+}[/tex] ions before silver metal is oxidized to  [tex]\rm Ag^+[/tex] ions.

The [tex]\rm Cu^{2+}[/tex] ions in the solution will then react with the silver metal to form [tex]\rm Ag^+[/tex] ions and Copper metal. This reaction is an example of a displacement reaction, where a more reactive metal removes a less reactive metal from its compound.

Therefore, option C. [tex]\rm Cu^{2+} + 2Ag \rightarrow Cu + 2Ag^+[/tex] is the correct answer.

Learn more about Redox reaction here:

https://brainly.com/question/28300253

#SPJ5

cesium-131 has a half life of 9.7 days. what percent of a cesium-131 sample remains after 60 days?

Answers

1.37% of cesium–131 will remain after 60 days

Explanation:

From the question given above, the following data were obtained:

Half-life (t½) = 9.7 days

Time (t) = 60 days

Percentage remaining after 60 days =?

Next, we shall determine the number of half-lives that has elapsed. This can be obtained as follow:

Half-life (t½) = 9.7 days

Time (t) = 60 days

Number of half-lives (n) =?

n = t / t½

n = 60 / 9.7

Finally, we shall determine the percentage remaining. This can be obtained as follow:

Let the original amount be N₀

Let the amount remaining be N

Number of half-lives (n) = 60 / 9.7

N = N₀ / 2ⁿ

Divide both side by N₀

N/N₀ = 1/2ⁿ

N/N₀ = 1 / 2⁽⁶⁰÷⁹•⁷⁾

N/N₀ = 0.0137

Multiply by 100 to express in percentage

N/N₀ = 0.0137 × 100

N/N₀ = 1.37%

Therefore, the percentage remaining after 60 days is 1.37%

NOTE; N/N₀ is the fraction remaining.

Learn more: https://brainly.com/question/14883322

what type of bonding does Sodium Sulphate comes under?and explain in detail please​

Answers

Answer:

The bond between sodium sulfate is an ionic bond since it's a bond between a metal and non metals however the bond between sulfur and oxygen is a covalent bond since the two are non metals and the other reason that makes this an ionic bond is that there is both losing and gaining of electrons..

I hope this helps

Assuming a mixture of equal volumes of o xylene and cyclohexane,which of these will distill off first?

Answers

cyclohexane will distill off first as it will have lower boiling point compared to ortho xylene which has higher molecular mass

Compare the modern (electron cloud) model of the atom with Bohr’s atomic model. Which of these statements describe the two models correctly? Check all of the boxes that apply.

A. Bohr’s model was replaced only because of its age.

B. Bohr’s model electrons cannot exist between orbits, but in the electron cloud model the location of the electrons cannot be predicted.

C. The modern model explains all available data about atoms; Bohr’s model does not.

D. The modern model is more widely accepted because it was proposed by more well known scientists.

Answers

Answer:

B. Bohr’s model electrons cannot exist between orbits, but in the electron cloud model, the location of the electrons cannot be predicted.

AND

C. The modern model explains all available data about atoms; Bohr’s model does not.

Explanation:

The answers are right on Edge. :)

Answer:

b and c

Explanation:

my assignment was 100% 2022

When comparing Be2 and H2:

I. Be2 is more stable because it contains both bonding and antibonding valence electrons.
II. H2 has a higher bond order than Be2.
III. H2 is more stable because it only contains 1s electrons.
IV. H2 is more stable because it is diamagnetic, whereas Be2 is paramagnetic

a. II,III,IV
b.II,III
c.III only
d.I,II
e.III,IV.

Answers

Answer:

The answer is "Option b".

Explanation:

H2 does have bond energy of 1, while Be2 has a covalent bond of zero. Be2 has eight electrons, each of which dwells in a distinct orbital. As just a result, four of them are linked molecular orbitals and two are antibonding molecular orbitals, respectively. As just a result, this molecule is unstable. This chemical orbital, with a bond order of 1, has just two electrons. As a result, it is a very solid substance. H2's bond length is higher than Be2's. Since it only has one electron, H2 is more stable than that of other compounds.

which of the following is indicated by the ph value of a solution?
a- it's hydrogen ion concentration
b- its ammonium ion concentration
c- ability to undergo chemical reaction
d- its ratio of solute amount to solvent volume

Answers

Answer:

c- ability to undergo chemical reaction

How many grams of magnesium chloride can be produced from 2.30 moles of chlorine gas reacting w excess magnesium Mg(s)+Cl2(g)->MgCl2(s)

Answers

The mass of magnesium chloride produced from 2.30 moles of chlorine gas is 218.99 grams.

How to calculate moles in stoichiometry?

Stoichiometry refers to the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions.

According to this question, magnesium reacts with chlorine gas to form magnesium chloride as follows:

Mg + Cl₂ → MgCl₂

Based on the above chemical equation, 1 mole of chlorine gas forms 1 mole of magnesium chloride.

This means that 2.30 moles of chlorine gas will 2.30 moles of magnesium chloride.

Next, we convert moles of magnesium chloride to mass as follows:

molar mass of magnesium chloride = 95.211g/mol

mass of magnesium chloride = 95.211 × 2.30 = 218.99 grams.

Therefore, 218.99 grams of magnesium chloride will be formed.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

Which subshells are found in each of the following shells
electron subshell - M shell

Answers

Answer:

3

Explanation:

The electron shells are labelled as K,L,M,N,O,P, and Q or 1,2,3,4,5,6, and 7.

As we go from innermost shell outwards, this number denotes the number of subshell in the shell. Electrons in outer shells have higher average energy and travel farther from the nucleus than those in inner shells.

Hence, M shell contains s,p and d subshells.

Other Questions
Usa el se impersonal para completar las oraciones con los verbos batir, cortar, hablar, lavar, mezclar, necesitar, poder, poner, o preparar. (Use the impersonal self to complete sentences with the verbs beat, cut, speak, wash, mix, need, power, put, or prepare.)1. Para preparar un sandwich de jamn y queso, _______ el jamn y el queso en lonchas.2. Para alimentarse bien, _________ comer de los cuatro grupos esenciales de alimentos.3. Primero ______ el brcoli y luego ______ en el agua a hervir.4. En este restaurante ______ los mariscos con ajo y hierbas.5. Segn la receta, ________ todos los ingredientes en una fuente grande.6. En una parrillada argentina, _______ varios tipos de carne.7. _______ francs en ese restaurante?8. ________ los huevos para preparar una tortilla espaola? c. rubidium sulfate2. Write balanced molecular equation, complete ionic equation, and net ionicequations for the mixing of the following solutions. Show states. If no reactionoccurs, show the ionic equation. (8 marks)a.NaNO3 +Ag2SO4 AgNO3 + Na2SO4 Accounts receivable, equipment, the building itself, and the land on which the building stands are examples of: 2. Estimate the square root of the following(i) 99(ii) 572(iii) 11437(4) 476(5) 9027(6) 512375 Constitutional and absolute monarchies are similar because both haveO a democratic form of government that allows electorate controlO a ParliamentO monarchs with supreme unquestionable power over governmenta monarch Which part of this excerpt from William Shakespeare's Macbeth uses apostrophe? Which line or lines in this editorial show faulty reasoning?Save Teenage Driving: A Call to Armsan editorial by Sophie BehrendRecently, House Representative Ken Weaver of Washington State proposed bill (House Bill R-9687b) that would raise the legal driving age to 21.You heard me right-Congress is considering raising the driving age to 21. If you are like me, such a law would be a catastrophe and would onlymean one thing: the end of life as we know it.Representative Weaver claims that his bill is motivated by "safety." He argues, "Nearly half of all accidents involve people under the age of 21."Representative Weaver also claims, "Raising the driving age would mean raising the level of safety on America's roads."But would ask Representative Weaver: Do not "nearly half" of all accidents involve men, and would not the streets be safer, then, if maledrivers were outlawed? And what about the percentage of accidents that occur on paved roads-should we do away with paved roads too?Weaver also claims that "a majority of seat belt violations" are the fault of the under-21 crowd. But let me ask you this: DO people under the ageof 21 reallywear their seat belts less often than older people, or are they just caught more often? That is, we know the police have their eye onthe teenagers, but are they looking at the adults as well?t But I can hear it now: "If teenagers are all so safe, why do they have such high accident rates?" Here's a possible answer: inexperience. Likeanybody who is inexperienced, the teenage driver mustsuffer through a legitimate period of self-doubt and skills acquisition. Chances are, if thedriving age were moved to 21, we would see 21 - to 24-year-olds causing the largest percentage of safety problems-not because of a maturityproblem, mind you,but just because they would be inexperlenced at driving. Measurement error that is normally distributed with a mean of 0 and a standard deviation of 0.5 gram is added to the true weight of a sample. Then the measurement is rounded to the nearest gram. Suppose that the true weight of a sample is 166.0 grams. (a) What is the probability that the rounded result is 167 grams?(b) What is the probability that the rounded result is 167 grams or more? Which genotype would give you a wild type phenotype? 4. One theme in Geography islocation. My house is near theBrown's Town Baptist church.This is an example oflocation *O RegionO AddressO Absolute locationRelative location A cube with an edge length s has a volume of 8 cubic units. What is the length of s? 4 complete sentences about the painting A Centennial Independence Write an equation for staying in Paris, France. Helpppppp and explain pls Explain how internet has brought changes in our culture and structure of society. log4(x^2+1)=log4(-2x) During the respiration of an organism A, 1 molecule of glucose produces 2 ATP molecules whereas in the respiration of another organism B, 1 molecule of glucose produces 38 ATP molecules. Which of the organisms, A or B has anaerobic mode ofrespiration? Explain with reason. How does water relate to the ability of a living thing to generate usuable energy? Why all individual are different? Please send me answer please