Answer : A
0,15 moles of NaOH -------in-------1000ml
x moles of NaOH ---------in-------100ml
x= 0,015 moles of NaOH
final volume =150ml
0,015 moles of NaOH -------in------150ml
x moles of NaOH ------in--------1000ml
x= 0,1 moles of NaOH
When humans plant more trees, carbon can begin entering the ____
a- hydrosphere
b- geosphere
c- biosphere
Answer:
biosphere
Explanation:
The carbon cycle is the biogeochemical cycle by which carbon is exchanged between the biosphere, geosphere, hydrosphere and atmosphere of the Earth.
The biosphere refers to the regions of the surface and atmosphere of the earth or another planet occupied by living organisms.
Plants are responsible for taking in carbon in nature. When more trees are planted, carbon is absorbed by plants which is a component of the biosphere. Hence planting more trees means increasing the intake of carbon into the biosphere.
Balance equation: _NO + _H2O = _NH3 + _O2
Answer:
4NO + 6H2O = 4NH3 + 5O2
Explanation:
Think about it this way: there are 4N's 4O's and 12H's and 10O's on both sides that's what makes it balanced
Hope this helps :)
What mass of water will be collected if 20.0
grams of hydrogen are consumed
2H2+O2--->2H2O
358g
179g
44.7g
Or 89.4g
Answer: 179 of [tex]H_2O[/tex] will be produced.
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} H_2=\frac{20.0g}{2.01g/mol}=9.95moles[/tex]
[tex]2H_2+O_2(g)\rightarrow 2H_2O[/tex]
According to stoichiometry :
2 moles of [tex]H_2[/tex] give = 2 moles of [tex]H_2O[/tex]
Thus 9.95 moles of [tex]H_2[/tex] will require=[tex]\frac{2}{2}\times 9.95=9.95moles[/tex] of [tex]H_2O[/tex]
Mass of [tex]H_2O=moles\times {\text {Molar mass}}=9.95moles\times 18g/mol=179g[/tex]
Thus 179 of [tex]H_2O[/tex] will be produced.
In general, when a substance changes from a solid to a liquid,
A.
the density of the substance increases.
B.
the substance no longer has density since density is a property only solids have.
C.
the density of the substance decreases.
D.
the density of the substance remains the same.
Answer:
c,density is the measure of compactness in a substance. Liquid particles are close together however they aren't as close as the particles in solids.
What is the overall reduction potential for the reaction Agt (aq) + Cu(s)——>Ag(s) + Cu2+ (aq)?
-0.46 V
+0.46 V
+0.57 v
+1.14V
Answer:
it should be +0.46 :)
Explanation:
I just took the test and got it right.
Answer:
I think it's +1.14 V, but don't take my word for it..
what is the correct formula for the compound platinum (vi) flouride?
Answer: PtF6
Explanation: is one of seventeen known binary hexafluorides.
Which options identify what the arrows in the diagram
represent? Check all that apply.
D atoms
elements
energy
gas
particles
Answer:
D
Explanation:
How do astronomers know about the future collision of Andromeda and the Milky Way?
A) All galaxies will collide at some point
B) The two galaxies have collided previously
C) Astronomers have observed their movements over time
D) The Milky Way has changed course to head toward Andromeda
Answer:
Astronomers have observed their movements over time
Explanation:
Just took the test!!!
The future collision of Andromeda and milky way are known by astronomers because ; ( C ) Astronomers have observed their movements over time
Andromeda also known as messier 31 is a spiral galaxy that appears as a milky blur when viewed from the earth and it is believed to be slightly over 2.5 million years old.
Astronomers predict that based on its movement and the movement of the Milky way there is most likely going to be a collision in future between the Andromeda and milky way.
Hence we can conclude that The future collision of Andromeda and milky way are known by astronomers because Astronomers have observed their movements over time
Learn more : https://brainly.com/question/2849133
What is the % of each element in Ni3{PO4) 2 ?
Answer:
nickel 48.1063%
Phosphorus 16.9245%
Oxygen 34.9692%
The percent composition of each element like nitrogen, oxygen and phosphorous in Ni₃(PO₄)₂ are 48.03%, 34.97% and 16.93% respectively.
How do we calculate % composition?Percent composition of any element present in any compound will be calculated as:
% comosition = (Mass of element / Mass of compound)×100%
Mass of Ni₃(PO₄)₂ compound = 366.02 g/mol
Molar mass of 3 Nitrogen atoms = 3×58.6 = 175.8 g/mol
Moar mass of 2 Phosphorous atoms = 2×31 = 62 g/mol
Moar mass of 8 Oxygen atoms = 8×16 = 128 g/mol
% comosition of Nitrogen = (175.8/366.02)×100% = 48.03%
% comosition of Oxygen = (128/366.02)×100% = 34.97%
% comosition of Phosphorous = (62/366.02)×100% = 16.93%
Hence % composition of nitrogen, oxygen and phosphorous is 48.03%, 34.97% and 16.93% respectively.
To know more about percent composition, visit the below link:
https://brainly.com/question/21044245
Na2O+H2O= 2NaOH how many grams of Na2O are required to produce 1.06*10^2 grams of NaOH
Answer:
77.5 grams of Na2O
Explanation:
Convert grams to mols.
1.06 x 10^2 grams x 1 mol NaOH/39.99
= 2.50 mols NaOH
Find the mole ratio of NaOH and Na2O
1:2
Convert mols NaOH to Na2O mols
2.50 mols NaOH x 1 mol Na2O/2 mols NaOH
= 1.25 mols Na2O
Convert to grams
1.25 mols Na2O x 61.98 grams Na2O/1 mol
= 77.5 grams Na2O required to produce 1.06 x 10^2 grams of NaOH
5) Usted empuja muy fuerte un escritorio pesado e intenta moverlo. Usted efectúa trabajo sobre el escritorio: a.- Ya sea que lo mueva o no, siempre y cuando usted ejerza una fuerza. B.- Sólo si el escritorio se mueve. C.- Sólo si el escritorio no se mueve. D.- Nunca; el escritorio hace trabajo sobre usted. E.- Ninguna de las anteriores. ME AYUDAN PORFA?
Answer:
5) You push hard on a heavy desk and try to move it. You do work on the desk: A.- Whether you move it or not, as long as you exert a force. B.- Only if the desktop moves. C.- Only if the desktop does not move. D.- Never; the desk does work on you. E.- None of the above. CAN YOU HELP ME?
B.- Only if the desktop moves.
Explanation:
No work is done if a force is exerted but no displacement occurs. A force perpendicular to the displacement does no generate work.
what started the wildfires
Answer:
It is a typical fires that started out of a lightning strike, or people carelessly starting it, or accidentally, or even arson, that went un-noticed and got out of hand.
Answer:
Explanation:
Forest fires always start by one of two ways - naturally caused or human caused. Natural fires are generally started by lightning, with a very small percentage started by spontaneous combustion of dry fuel such as sawdust and leaves. On the other hand, human-caused fires can be due to any number of reasons.
(Multiple Choice, 30 pts)
A student thinks that halogens are highly reactive because their electrons are weakly attracted to their nuclei. Which is evidence that disputes this student's idea?
A. Halogens react with alkali metals.
B. Halogens cannot react with noble gases.
C. Halogens tend to attract electrons when bonding.
D. Halogens have a full octet of electrons.
Answer:
c
Explanation:
¨Halogens being non metals have greater electronegativities hence, attract electrons and making the statement disputed. Nobel gases are highly stable; this explains why they are nonreactive. They do not form chemical bonds because they only have a little tendency to either gain or lose an electron; on the other hand, halogens are reactive because they only need one additional electron to complete their octet. ¨
i found that from another users answer for the same question
Answer:
answer c
Explanation:
How many grams of KF are in 2 liters of a 3.0 M solution of KF
Answer:
mass ( g ) = 348 g
Explanation:
First you know : M = mole / volume (L)
in question you have the M and V and the formula of SUBSTANCE ( KF )
first you get the number of mole from equation above
so 3 = no of mole / 2
no of mole = 3 × 2 = 6 moles
and the moles equation is no of moles = mass ( g ) / molecular weight ( g/mole )
so you have already calculate the moles and you can know the MW from the Question
Mw of KF = 39 + 19 = 58
so n = mass / MW
so 6 = mass / 58
mass ( g ) = 348 g
GOOD LUCK
What is the mass of 3.00 moles of carbon
Answer:
36 grams as 1 mole is 12 grams
Answer:
tbh idk cause I will love to answer your question but ehh
Wax is a nonpolar substance . In which type of substance is it the most soluble ?
Answer:
nonpolar
Explanation:
Use the phrase "like dissolves like"
- Hope that helps! Please let me know if you need further explanation.
On May 3, Zirbal Corporation purchased 4,500 shares of its own stock for $36,000 cash. On November 4, Zirbal reissued 800 shares of this treasury stock for $7,200. Prepare the May 3 and November 4 journal entries to record Zirbal's purchase and reissuance of treasury stock.
Answer:
Explanation:
Each share costs $36000/4500
= $8
800 shares will cost 800*8
= $6400
Find attached the journal
mutations that neither benefit nor harm the organism have (blank) effect on the organisms survival
Answer:
I would say that the mutation has no effect on the organism, as it doesn't help or harm it.
hope this helps :)
Explanation:
Answer:
its a neutral
Explanation:
i did the test
Most solutions are ___ solutions.
A heterogeneous
B saturated
C static
D unsaturated
Answer:
the answer is A heterogeneous solutions
Explanation:
Mixtures in two or more phases are heterogeneous mixtures. Examples include ice cubes in a drink, sand and water, and salt and oil. The liquid that is immiscible form heterogeneous mixtures. A good example is a mixture of oil and water.Jun 26, 2019
A sample of diborane gas has a pressure of 345 torr at a temperature of -15c and volume of 3.48L if conditions are changed so that the temperature is 36c and the pressure is 468 torr what will be the volume of the sample
Answer: 3.05L= V2
Explanation:
using
P1V1/T1=P2V2/T2
where p1= 345torr
T1, tempertaure= -15c+ 273=258K
T2, temperature= 36+ 273=309K
p2, Pressure= 468 torr
V2=???
P1V1/T1=P2V2/T2
v2=P1V1T2/T1P2= 345X3.46L X 309/ 258X 468=
V2= 3.05L
How many grams of CO2 are produced from the burning of 1.0 mol of amyl alcohol, C5H11OH?
Answer:
220g of CO2
Explanation:
Step 1:
The balanced equation for the reaction.
2C5H11OH + 15O2 —> 10CO2 + 12H2O
Step 2:
Determination of the number of mole of CO2 produced by burning 1 mole of C5H11OH.
From the balanced equation above,
2 moles of C5H11OH produced 10 moles CO2.
Therefore, 1 mole of C5H11OH will produce = (1 x 10)/2 = 5 moles of CO2.
Therefore, 5 moles of CO2 is produced from the reaction.
Step 3:
Conversion of 5 moles of CO2 to grams.
Molar mass of CO2 = 12 + (2x16) = 44g/mol
Number of mole of CO2 = 5 moles
Mass of CO2 =...?
Mass = mole x molar mass
Mass of CO2 = 5 x 44
Mass of CO2 = 220g.
Therefore, 220g of CO2 were obtained from the reaction.
46g of a mineral contained 16g copper, 14g iron and 16g sulphur. Calculate the empirical
formula of the mineral.
Answer:
CuFeS2
Explanation:
Calculate the moles of each substance by doing moles= mass/relative atomic mass. you should get 0.25 moles of copper and iron and 0.5 moles of sulfur. Then divide all of those numbers by 0.25 (as its the lowest value) you should get 1 for copper and iron and 2 for sulfur. This represents the ratio that they are in within the mineral.
Is the same reactant always the limiting reactant?
5. On what organ does alcohol have the most noticeable effect?
Answer:
the liver
Explanation:
it processes alcohol, work very hard
Given:
CH4 + 2O2 → CO2 + 2H2O, ΔH = -890 kJ/mol
How much energy is released when 59.7 grams of methane (CH4) reacts with oxygen?
The combustion of 59.7 grams of methane releases ____ kilojoules of energy
Answer:
The combustion of 59.7 grams of methane releases 3320.81 kilojoules of energy
Explanation:
Given;
CH₄ + 2O₂ → CO₂ + 2H₂O, ΔH = -890 kJ/mol
From the combustion reaction above, it can be observed that;
1 mole of methane (CH₄) released 890 kilojoules of energy.
Now, we convert 59.7 grams of methane to moles
CH₄ = 12 + (1x4) = 16 g/mol
59.7 g of CH₄ [tex]= \frac{59.7}{16} = 3.73125 \ moles[/tex]
1 mole of methane (CH₄) released 890 kilojoules of energy
3.73125 moles of methane (CH₄) will release ?
= 3.73125 moles x -890 kJ/mol
= -3320.81 kJ
Therefore, the combustion of 59.7 grams of methane releases 3320.81 kilojoules of energy
Answer:
The combustion will release -3,321 KJ/mol of energy
Explanation:
Which 1.0 M solution has the lowest pH?
A.
HCN
B.
H3PO4
C.
H2C2O4
D.
HCl
What is the percentage composition of cobalt in cobalt(II) fluoride, CoF2?
Answer:
60.8%
Explanation:
We'll begin obtaining the molar mass of cobalt(II) fluoride, CoF2. This can be done as shown below:
Molar mass of CoF2 = 59 + (19x2) = 97g/mol.
The percentage composition of cobalt in cobalt(II) fluoride, CoF2 is given by:
Mass of Co/Molar Mass of CoF2 x 100
=> 59/97 x 100 = 60.8%
Therefore, the percentage composition of cobalt in cobalt(II) fluoride, CoF2 is 60.8%
How might an antioxidant prevent another element from gaining or losing an electron?
Answer:
An antioxidant helps in the mopping up and elimination of free radicals and a common example is Glutathione. Oxidation reactions Involves the transfer of electrons or addition of oxygen to a substance.
Antioxidants help in decreasing or prevention of the oxidation of the molecules due to free radicals being formed which causes damage in the cells of animals.
What is the oxidation half-reaction for this unbalanced redox equation? cr2o72– + fe2+ → cr3+ + fe3+ cr3+ → cr2o72– cr2o72– → cr3+ fe3+ → fe2+ fe2+ → fe3+?
Answer:
6Fe^2+(aq) -------> 6Fe^3+(aq) + 6e
Explanation:
The balanced oxidation half equation is;
6Fe^2+(aq) -------> 6Fe^3+(aq) + 6e
A redox reaction is actually an acronym for oxidation-reducation reaction. Since the both reactions are complementary, there can't be oxidation without reduction and there can't be reduction without oxidation.
The main characteristic of redox reactions is that electrons are transferred in the process. The number of electrons transferred is usually deduced from the balanced reaction equation. For this reaction, the balanced overall reaction equation is;
Cr2O7^2–(aq) + 6Fe^2+(aq) +14H^+(aq)→ 2Cr^3+(aq) + 6Fe^3+ (aq) + 7H2O(l)
It is clear from the equation above that six electrons were transferred. Thus six Fe^2+ ions lost one electron each in the oxidation half equation as shown in the balanced oxidation half equation above.
Why is fusion not used to generate electrical power ?
Answer:
Fusion doesn't produce runway chain reactions the way fission can, so there's no need to worry about meltdowns.
