This problem is referring to an anhydrous salt that is derive from a hydrated Epson salt (magnesium sulfate hydrate) and the atom economy is required. However, not enough information is provided, yet we can use the attached file as a reference to provide a methodology of calculation.
To begin with, we need to calculate the [tex]x[/tex] which refers to the degree of hydration of the salt, so that we use the mass before and after heating the sample to figure out the grams and subsequently moles of water that are in there:
[tex]m_w=3.648g-1.782g=1.866g\\\\n_w=0.103molH_2O[/tex]
Next, since 1.782g corresponds to the anhydrous salt, we calculate the moles in such a amount:
[tex]1.782gMgSO_4*\frac{1molMgSO_4}{120.4gMgSO_4}=0.0148mol[/tex]
Then, we divide the moles of water by those of the anhydrous salt to calculte [tex]x[/tex]:
[tex]x=\frac{0.103mol}{0.0148mol} =6.96=7[/tex]
This means the formula of the hydrate is:
[tex]MgSO_4\ 7H_2O[/tex]
Finally, for the atom economy we just divide the molar mass of the anhydrous salt by that of the hydrate:
[tex]A.E=\frac{120.4g/mol}{246.47g/mol} *100\%\\\\A.E=48.8\%[/tex]
Learn more:
https://brainly.com/question/20796771What is the role of cellular respiration in organisms?
to provide energy for photosynthesis
to provide energy for breaking apart fuel molecules
to provide energy for making oxygen
to provide energy for cell activity
Answer:
C. sorry if I'm wrong ...................
Why is the Milky Way considered a galaxy
Answer:
Explanation:
All the stars we see in the night sky are in our own Milky Way Galaxy. Our galaxy is called the Milky Way because it appears as a milky band of light in the sky when you see it in a really dark area.
Answer: it is
Explanation: A galaxy is a system of millions or billions of stars, together with gas and dust, held together by gravitational attraction, plus there are 100 billion planet in it.
Which is an example of a physical change?
A) Mixing blue and yellow paint to create green paint
B) Adding water and yeast to bread dough in order to make it raise.
C) Mixing two liquids together in a test tube and the tube becoming warm.
D) Adding a piece of chalk containing calcium carbonate to a glass of mild acid causing the information of a foam of bubbles.
Chemical properties of water and oxygen for class 8
Help
What is the correct orientation of the bar magnet, based on the magnetic field
lines shown?
A. South pole on the top edge and north pole on the bottom edge.
B. North pole on the top edge and south pole on the bottom edge
C. South pole on the left end and north pole on the right end
D. North pole on the left end and south pole on the right end
Answer:
b
Explanation:
north is up south is bottom
Answer:
C. South pole on the left end and north pole on the right end
Explanation:
From the figure, we can conclude that the poles of the magnet are on either sides of the magnet
Therefore, options 1 and 2 are excluded
It is a convention that the magnetic field lines move out of the north pole of a magnet and into the south pole of the magnet
From the figure, we can see that the magnetic field lines are moving out from the right end and into the left end
This means that the north pole is at the right end and that the south pole is at the left one
An iron object alloyed with cobalt rusts more quickly than a pure iron object. However, an iron object alloyed with manganese rusts less quickly than a pure iron object under the same conditions. This is true because: __________
a. cobalt is a stronger reducing agent than iron
b. iron is a stronger reducing agent than manganese
c. cobalt exhibits more metallic character than either iron or manganese in the iron-manganese alloy
Rusting is an electrochemical reaction. Iron rusts faster when alloyed with cobalt than when alloyed with manganese because, in the iron-manganese alloy, manganese is rendered the anode and iron is rendered the cathode
An alloy is a combination of two metals. There are various reasons for producing alloys such as greater tensile strength, corrosion resistance and improved aesthetic appearance.
When iron is alloyed with cobalt, the iron rusts faster than pure iron because iron is rendered the anode and cobalt is rendered the cathode. When the iron is alloyed with manganese, it rusts more slowly than pure iron because in the iron-manganese alloy, manganese is rendered the anode and iron is rendered the cathode.
Missing parts;
An iron object alloyed with cobalt rusts more quickly than a pure iron object. However, an iron object alloyed with manganese rusts less quickly than a pure iron object under the same conditions. This is true because
(1) cobalt is a stronger reducing agent than iron
(2) iron is a stronger reducing agent than manganese
(3) cobalt exhibits more metallic character than either iron or manganese
(4) in the iron-manganese alloy, manganese is rendered the anode and iron is rendered the cathode
(5) in the iron-cobalt alloy, cobalt is rendered the anode and iron is rendered the cathode
Learn more: https://brainly.com/question/14281129
The letter for element Q stands for "qualium." What would the compound in 1a be called?
(1 A)
Answer:
ooooooooooo0000000000000
Please help This is for my chemistry class and I need to get it done but I’m lost and need answers
Answer:
chlorine is a non metal.
sodium is a alkali metal.
helium is a noble gas.
nickel is a transition metal
Please help. A 208 g sample of sodium-24 decays. How much of this radioactive isotope will remain after 3 half
lifes?
Answer: The information about sequential order of the event occurred in the past can be obtained by using only relative dating method.
Explanation:
Relative dating method doesn’t give information about when it happened. It provides sequential order of the events. It is the art of deciding the overall happening of past occasions (i.e., the age of an item in contrast with another), without fundamentally deciding their outright age (for example evaluated age).
In topography, shake or shallow stores, fossils and lithologies can be utilized to correspond one stratigraphic segment with another.
when calculating specific heat what if the change in temperature is negative?
Answer:
If AT and q are negative, then heat flows from an object into its surroundings. If a substance gains thermal energy, its temperature increases, its final temperature is higher than its initial temperature, then AT>0 and q is positive.
What is infrared energy? simplify it
Answer:
It is a type of radiant energy that's invisible to human eyes but that we can feel as heat.
Which would best describe the way an organism reacts to other organisms or to its
environment?
A. Instinct
B. Behavior
C. Conditioning
D. Imprinting
Answer:
Explanation:
Behavior
Which of the following shows a valid combustion reaction?
2Al + 2O2 → 2AlO + O2
C2H4 + 3O2 → 2CO2 + 2H2O
2CH4 + O2 → 2CO + 4H2
Ca + O2 → CaOH
Answer: C2H4 + 3O2 → 2CO2 + 2H2O
Explanation:
2Al + 2O2 → 2AlO + O2 Not Balanced Properly: 2Al + O2 = 2AlO
C2H4 + 3O2 → 2CO2 + 2H2O Looks Good
2CH4 + O2 → 2CO + 4H2 Not Correct: CO should be CO2
Ca + O2 → CaOH Not Balanced and No source for the H
Answer:
2H4+3O2 →2CO2+2H2
Explanation:
which of these is a rough approximation of the cogito?
Given the Latin meaning of the cogito, we can confirm that it is roughly translated and summarized by the phrase "I think, therefore I am".
Cogito, ergo sum or "The Cogito" is an extremely popular, well-known philosophical phrase credited to Rene Descartes. This Latin phrase is roughly translated as "I think, therefore I am", which appeared originally in "The Principles of Philosophy", and was later translated to a variety of languages in an attempt to reach a wider public, most notably into Latin.
To learn more visit:
https://brainly.com/question/16853649?referrer=searchResults
An atom of sodium has 11 electrons. Make a sketch of a sodium atom, showing how many electrons it has at each energy level. Infer how reactive sodium atoms are.
SOMEONE HELP ME PLEASE :(. I DONT GET IT :(
Most elements are ____________. The _____________ elements on the left of the stair-step line on the ______________ of Elements are metals or metal-like _____________. Some of the physical properties of metals are ______________ (shininess) and ___________ density. They are also good conductors of ___________ and ______________. Metals can be hammered into __________sheets.
Answer:
metals, 88 , periodic table , luster , heat, electricity , thin, right, opposite , appearance , luster , malleable , ductile, opposite , shiny, moderately
Explanation:
metals, 88 , periodic table , luster , heat, electricity , thin, right, opposite , appearance , luster , malleable , ductile, opposite , shiny, moderately Is the answer.
(Hope this helps can I pls have brainlist (crown)☺️)
what is the name of the high-energy compound that cells use to fuel chemical reactions?
Answer: Adenosine triphosphate, or ATP, is the primary carrier of energy in cells. The water-mediated reaction known as hydrolysis releases energy from the chemical bonds in ATP to fuel cellular processes.
Explanation:
Which one of the following would form a precipitate when mixed with LiOH?
A) KNO3
B) NH4Cl
C) Ca(C2H3O2)2
D) ZnBr2
Answer:
ZnBr2
Explanation:
KNO3 + LiOH -------> no reaction
This is because KNO3 and LiOH completely ionize.in water and form neutral solutions.Since both are neutral no reaction occurs
NH4Cl + LiOH -----> NH3 (aq) + H2O (l) + LiCl(aq)
None of the above products are precipitates
Ca(C2H3O2)2 + 2LiOH -----> Ca(OH)2 (aq) + 2LiC2H3O2 (aq)
ZnBr2 + 2LiOH -----> Zn(OH)2 (s) + LiBr2 ( aq)
Zn(OH)2 thus formed is a white precipitate
However when excess LiOH is added Zn(OH)2 precipitate will dissolve to give a clear solution of Li2ZnO2 .
You can remember this by the fact that Na,K,Rb,Cs,Ca,Sr,Ba hydroxides are soluble in water and all other hydroxide are precipitated in water
Zn(OH)2 (s) + 2 LiOH ------> Li2ZnO2(aq) + 2 H2O ( l)
The only compound that will form a precipitate with LiOH would be ZnBr2
Precipitation reactionsThese are double displacement reactions in which precipitates are produced. Precipitates are insoluble solids formed from the combination of ions in aqueous solutions.
In this case, a reaction between LiOH and ZnBr2 would be as follows;
2LiOH + ZnBr2 ----------> 2LiBr + Zn(OH)2 (s)
Zn(OH)2 is an insoluble salt and will precipitate out in the solution.
More on precipitation can be found here: https://brainly.com/question/5019199
How do erosions affect land forms?
Erosion is the only cause of land form changes.
Land forms can be created by erosion.
Erosion can prevent land forms from being built.
Land forms can only be created through erosions.
Answer:
the anwser is landforms can be created by erosion
Explanation:
does anyone know how to find the electron configuration of an element without using a periodic table?? group and period is already given
What is the frequency of light with a wavelength of 450 nm?
Answer:
The frequency of blue light that has a wavelength of 450 nm is 6.7×1014 6.7 × 10 14 Hz.
Explanation:
BRAINLIEST?
When pyridine is treated with a mixture of nitric and sulfuric acids, the major product is:.
Answer: 3-nitropyridine
Explanation:
whats the formula for lithium nitride
Answer:
Lithium nitride. Trilithium nitride. 26134-62-3. Lithium nitride (Li3N) Li3N.
How many moles of iron are in 50.0g of iron? How many iron atoms are in 59.0g of iron?
Answer:
[tex]50.0 \div 59.0 = 10[/tex]
right
Valence electrons are electrons in the ? of an atom.
Answer:
Valence electrons are the outermost of electrons.
Explanation:
valence electrons are the outermost electrons of an atom located in the shell/ orbit
fork is a metal or nonmetal ?
What is the chemical formula for ammonium carbonate?
help me please the subject is siecnce
Answer:
okay your question in science
how well did the landmases fit together this time
Answer:
The theory of continental drift is most associated with the scientist Alfred Wegener. In the early 20th century, Wegener published a paper explaining his theory that the continental landmasses were “drifting” across the Earth, sometimes plowing through oceans and into each other. He called this movement continental drift.
Explanation:
What structural characteristic do all of the atoms within a group (vertical columns) have in common?
Answer:
The vertical columns (groups) of the periodic table are arranged such that all its elements have the same number of valence electrons. All elements within a certain group thus share similar properties.
hope this helps
Explanation:
Each column is called a group. The elements in each group have the same number of electrons in the outer orbital. Those outer electrons are also called valence electrons. They are the electrons involved in chemical bonds with other elements.