The velocity of the person as seen by someone not moving (watching the train going by) will be 55 m/s South. I can therefore conclude that none of the option given is correct.
Given that a train is moving south at 50 m/s and a person is running SOUTH on the train at 5 m/s.
That means the person is running relatively to the velocity of the train. Since the train and the person are moving in the same direction, the relative velocity seen by an observer watching the train going will be the addition of both the train and the person in the direction of the train.
That is,
Relative velocity = 50 + 5
Relative velocity = 55 m/s South.
Therefore, the velocity of the person as seen by someone not moving (watching the train going by) will be 55 m/s South.
I can therefore conclude that none of the option given is correct.
Learn more here: https://brainly.com/question/14636414
A crane lifts a 10000 N load through a distance of 30mins in 40s calculate work done
Given,
Force = 10,000 N
Distance = 30 m
Time = 40 s
Work done = force × distance
Work = 10,000 × 30
Work = 300,000 J
______
꧁✿ ᴿᴬᴵᴺᴮᴼᵂˢᴬᴸᵀ2222 ✬꧂
The work done on the object is equal to the power it experiences which is equal to 735 watts.
What is work done?Work done is defined as the product of force applied and the distance over which the force is applied on the object. Work is done on an object when a force is applied to an object and the object is moved through a particular distance.
The time rate of doing work is called as power, which is designated by the symbol P. It is measured in the units of watts, where one watt is equal to one joule energy applied per second time.
Work done on an object is equal to the force (F) multiplied by the distance d in the direction of the force. Where, time interval is Δt.
P = W/Δt = F × d/Δt = m × g × h/Δt = 100 × 9.8 × 30 / 40
Power = 735 watts
The power of the object is 735 watts.
Learn more about Work done here:
https://brainly.com/question/13662169
#SPJ2
7. A bus covers a certain distance in 60 minutes if it runs at a speed of 60 km/hr.
What must be the speed of the bus in order to reduce the time of journey by 40
minutes?
Answer:
90 Km/h
Explanation:
60 mins is 1 hr
so in an hour bus covers 60 Km
so new speed:
d/t
(60km/40mins)*60mins/h
90Km/h
What is the rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod
Answer:
C) 5ML^2
Explanation:
2 Spheres of mass M
Bug's mass 3M
Rod length 2L, radius L
Find Rotational Inertia I
I=Σmr^2
I=(3M+M+M)L^2
I=5ML^2
The rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod is 5ML².
Rotational inertia of the systemThe rotational inertia of the system is determined by summing all the masses together and multiply with the radius.
I(t) = Σmr²
Where;
m is the massr is the radiusI(t) = Inertia of the 2 spheres + inertia of the bug
I(t) = (M + M)L² + (3M)L²
I(t) = 2ML² + 3ML²
I(t) = 5ML²
Thus, the rotational inertia of the bug-rod-spheres system about the horizontal axis through the center of the rod is 5ML².
Complete question is below:
There are 2 Spheres of mass M and Bug's mass 3M. The Rod length is 2L, radius L.
Learn more about rotational inertia here: https://brainly.com/question/14001220
how have astronomers interpreted the unexpectedly fast rotation of galaxies
Answer:
There must be a lot of dark matter that can be felt but not seen
The astronomers interpreted the unexpectedly fast rotation of galaxies that there must be a large quantity of dark energy whose gravity is detectable yet invisible.
What is a galaxy?Any system of stars plus interstellar material that makes up the cosmos is referred to as a galaxy. Such assemblages are common, and many of them are so massive that they hold tens of trillions of stars.
A vast variety of galaxies, from dim, hazy dwarf objects to spectacular spiral-shaped giants, have been created by nature. Almost all galaxies seem to have formed shortly after the universe started, and they are everywhere in space, even at the farthest limits of the universe that can be seen by the most advanced telescopes.
The majority of galaxies are found in clusters, many of which are further organized into clusters that span hundreds of billions of light-years.
Since there are almost empty spaces between these so-called super clusters, the universe's overall structure resembles a network of sheets or chains of galaxies.
To know more about Galaxy:
https://brainly.com/question/2905713
#SPJ12
If the submarine intends to submerge to a depth of 150 m, what pressure must it be designed to withstand
Explanation:
Hydrostatic pressure, P = hdg where d is density if the liquid ( water)
P= 150m × 1000kgm-3 × 10ms-2
P= 1.5 ×10^6 Pa
when light enters water, it bends. what does the amount of bending depend on?
Answer:
the change of speed!
Explanation:
if light speeds up or slow down more it bend more
When the sum of all the forces acting on a block.
Answer:
finish the question pls
Explanation:
What symbols are these?
Answer:
the bottom one is wollsiegel
You throw a can of cranberry sauce straight up in the air with an initial velocity of 12 m/s. What is the maximum height the baseball reaches above your head.
Answer:
Δx=7.35m
Explanation:
This is a free fall problem (g= -9.8 m/s²).
Displacement: ? <--- what you're trying to find (max height)
Initial Velocity: 12 m/s
Final Velocity: 0 m/s <-- since the can will land back in your hands
Time: Missing <-- not needed to solve
Acceleration: -9.8 m/s²
The equation that you will use is vf²=vi²+2aΔx
Now plug the information into the equation!
(0m/s)²=(12m/s)²+2(-9.8m/s²)Δx
Multiply the 2 with the acceleration (-9.8m/s²)
(0m/s)²=(12m/s)²-19.6m/s²Δx
Now you need to square the final and initial velocity
0m/s=144m/s-19.6m/s²Δx
Move 144 to the other side of the equal sign
-144m/s=-19.6m/s²Δx
Divide both sides by -19.6m/s²
7.346m=Δx
You can round it to the tenth or hundreth place, up to you!
For this example, I'll round to the hundredth...
Δx=7.35m
I would double check this answer or review it yourself to see if it's correct.
Good luck with your studies!
given. force of 88N and an acceleration of 4 m/s 2 what is the mass?
How fast is an object going if it travels from San Diego to Anaheim in 1.25 hours (hr)? The distance from San Diego to Anaheim is 93 miles (mi).
a) 74.4 mi/hr
b) 116.25 mi/hr
c) 0.013 mi/hr
d) 84.25 mi/hr
e) None of the answers
Answer:
74.4 mph
Explanation:
Since we have the distance in miles and the time it took in hours, we can divide the two to get miles per hour.
speed = mi/hr
speed = 93/1.25
speed = 74.4 mph
why do we believe 90 percent of the mass of the milky way is in the form of dark matter?
Answer:
The orbital speeds of stars far from the galactic center are surprisingly high, suggesting that these stars are feeling gravitational effects from unseen matter in the halo.
The mercury in a barometer of a cross-sectional area 1 cm² stands at 75 cm, and the space above it is 9 cm in length. What
volume of air, measured at 3. The mercury in a barometer of a cross-sectional area 1 cm² stands at 75 cm, and the space above it is 9 cm in length. What
volume of air, measured at atmospheric pressure, would have to be admitted into the space to cause the column of the mercury
to drop to 59 cm?
The ideal gas equation and the pressure in barometer allows us to find the amount of air that we must introduce into the barometer for the change in height of the mercury column is:
The variation of the volume is: ΔV = 7.67 cm³
Pressure is defined by the relationship between force and area.
P = F / A
The ideal gas equation establishes a relationship between pressure, volume, and temperature of an ideal gas.
PV = nR T
Where P is pressure, V is volume, and T is temperature.
Let's write this equation for two points assuming that the temperature has not changed.
P₀ V₀ = P₁ V₁
V₁ = [tex]\frac{P_o}{P_1} \ V_o[/tex] (1)
The subscript "o" is used for the start point and the subscript "1" for the end point.
The pressure in a barometer is:
P = ρ g y
They indicate the initial height of the barometer y₀=75 cm, the distance from empty space y'₀ = 9 cm and the final height of the barometer y₁ = 59 cm.
The volume of the cylinder is
V = π r² y
Let's calculate the initial volume.
V₀ = π 1 9
V₀ = 28.27 cm³
We substitute in equation 1.
V₁ = [tex]\frac{\rho \ g \ y_o}{\rho \ g \ y_1} \ V_o[/tex]
V₁ = [tex]\frac{y_o}{y_1} \ V_o[/tex]
Let's calculate.
V₁ = [tex]\frac{75}{59} \ 27.27[/tex]
V₁ = 35.94 cm³
The volume to be incremented is
ΔV = V₁ - V₀
ΔV = 35.94 - 28.27
ΔV = 7.67 cm³
Using the ideal gas equation and the pressure in barometer we can find the amount of air that we must introduce into the barometer for the change in height of the mercury column is:
The change of the volume is: ΔV = 7.67 cm³
Learn more here: brainly.com/question/17254541
What is the disappearance of a wave into a medium.
A. Signal
B. Amplitude
C. Absorption
D. Transmission
Answer:
Absorption
Explanation:
the disappearance of an EM wave into the medium. scattering – the spreading out of light rays in all directions because particles reflect and absorb the light.
Guys plz i need those answers as soon as possible
9) a) formula = h(ρ)g by default g=9.8m/s²
Pressure = 2×1000×9.8 = 19600Pa
b)
how do i do this question in science?
simple subtract and ummmmmm.....
Se aplican dos fuerzas concurrentes a un objeto de 4N a la derecha y 5N a la izquierda. ¿Hacia donde se movió y con cuanta fuerza?
The forces move strongly towards the left by 1N
Given the following
Force towards the right = 4N
Force towards the left = 5N
Note that the force acting towards the left is negative, hence the force acting towards the left is -5N
Take the sum of force
Resultant force = -5N + 4N
Resultant force = -1N
This shows that the forces move strongly towards the left by 1N
Learn more here: https://brainly.com/question/24629099
How does water temperature affect density?
if you have 3 moles of iron, how many grams of iron do you have?
Answer:
55.84 look at periodic table
so 55.84*3= 167.52gFe
2. What are the challenges of wind energy that causes decrease in the electrical production?
3. Give two solutions:
1. Modification in the structure of the turbine
2. Modification in the function of the turbine.
4. You must estimate the cost in each solution, and which one is more affordable and efficient for the municipality to go for.
5. You must make sure that there is minimal energy loss.
Levelized production cost is a big challenge in the production of wind energy.
The main challenge in the production of wind energy is the high production cost. It has to minimize the Levelized Production Cost (LPC) which is the ratio between energy production cost and economic lifetime. This problem can be solved by doing modification in the structure of the turbine as well as we must ensure minimal energy loss.
The modification in the structure can produce more electrical energy and reduce the energy loss also provides more profit to the company so we can conclude that levelized production cost is a big challenge in the production of wind energy.
Learn more: https://brainly.com/question/25543609
An "energy bar" contains 26 ggof carbohydrates.How much energy is this in joules?
Without friction, what is the mass of an ball accelerating at 1.8 m/sec2 to which an
an unbalanced force of 42 Newtons has been applied?
A 75.60 kg
B 00.04 kg
C 23.33 kg
D 43.80 kg
Answer:
23.33 kgExplanation:
The mass of the object can be found by using the formula
[tex]m = \frac{f}{a} \\ [/tex]
f is the force
a is the acceleration
From the question we have
[tex]m = \frac{42}{1.8} = 23.3333... \\ [/tex]
We have the final answer as
23.33 kgHope this helps you
Answer:
[tex]\boxed {\boxed {\sf C. \ 23.33 \ kg}}[/tex]
Explanation:
According to Newton's Second Law of Motion, force is the product of mass and acceleration.
[tex]F=ma[/tex]
The mass of the ball is unknown. The ball is accelerating at 1.8 meters per second squared. An unbalanced force of 42 Newtons is applied to the ball.
Convert the units of force. 1 Newton is equal to 1 kilogram meter per second squared, so our answer of 42 Newtons is equal to 42 kg*m/s².
F= 42 kg*m/s² a= 1.8 m/s²Substitute the values into the formula.
[tex]42 \ kg*m/s^1 = m * 1.8 \ m/s^2[/tex]
We are solving for the mass, so we must isolate the variable m. It is being multiplied by 1.8 meters per second squared. The inverse operation of multiplication is division. Divide both sides by 1.8 m/s².
[tex]\frac {42 \ kg*m/s^2}{1.8 \ m/s^2} = \frac{a*1.8 \ m/s^2}{1.8 \ m/s^2}[/tex]
[tex]\frac {42 \ kg*m/s^2}{1.8 \ m/s^2} =m[/tex]
The units of meters per second squared cancel.
[tex]\frac {42 \ kg}{1.8 } =m[/tex]
[tex]23.3333333 \ kg=m[/tex]
Round to the hundredth place. The 3 in the thousandth place tells us to leave the 3 in the hundredth place.
[tex]23.33 \ kg \approx m[/tex]
The mass of the ball is approximately 23.33 kilograms.
I need help in question 7, a and b.
Answer:
The graph for 7a is shown in the attachment. For question 7b she walks a distance of 16 meters. (m)
Explanation:
A bob attached to a string of length L = 1.25 m, initially found at the equilibrium
position, is given an initial velocity v = 0.8 m/s. The maximum displacement angle,
Omax, is: (Take g=10 m/s)
17
3.2
13
10.2
6.4
Clear selection
A hoh attached to a string of length 2 m is displaced by an angle of 8º and then
The maximum displacement angle of the bob is 13⁰.
The given parameters;
Length of the pendulum, L = 1.25 mInitial velocity of the bob, v = 0.8 m/sThe maximum displacement of the bob is calculated by applying the principle of conservation of energy;
[tex]P.E = K.E\\\\mgh = \frac{1}{2} mv^2\\\\h = \frac{v^2}{2g} \\\\h = \frac{0.8^2}{2\times 10} \\\\h = 0.032 \ m[/tex]
The maximum displacement angle is calculated as follows;
[tex]cos \theta = \frac{L-h}{L} \\\\cos \theta = \frac{1.25 - 0.032}{1.25} \\\\\cos \theta = \frac{1.218}{1.25} \\\\cos \theta = 0.9744\\\\\theta = cos^{-1}(0.9744)\\\\\theta = 13\ ^0[/tex]
Thus, the maximum displacement angle of the bob is 13⁰.
Learn more here:https://brainly.com/question/13981780
. Quỹ đạo chuyển động của một vật là
Answer:
you are very kind Po lang
State a hypothesis about your estimated daily water use.
Answer
Estimates vary, but, on average, each person uses about 80-100 gallons of water per day, for indoor home uses.
Explanation:
Two 4 kg blocks hang from a rope that passes over two frictionless pulleys . What is the tension in the horizontal portion of the rope if the blocks are not moving and the rope and the two pulleys have negligible mass?
The tension in the horizontal portion of the rope provided the blocks are not moving and the rope has negligible mass is 40 N
The tension in the rope is a pulling force that acts on the rope when the mass of 4kg is placed on each side of the two frictionless pulley.
According to Newton's second Law;
Force = (Tension) = mass × acceleration due to gravity
∴
We can say:
Tension = 4kg × 9.81 m/s²
Tension = 39.24 N
Tension = 40 N (to the nearest whole number)
Therefore, we can conclude that the tension in the horizontal portion of the rope is 40 N
Learn more about Newton's Law here:
https://brainly.com/question/3715235?referrer=searchResults
Can u plz help me with my hw
Answer:
1) 4 x 25m = 100m
2) 0 because after 4 lengths, he's back at the starting block.
3) speed is distance over time so speed here is 100m/125s = 0.8m/s
4) ...
5) 100m / 1.25m/s = 80s
6.a) 100m / 0.5m/s = 200s
7.b) ... can't draw this now..
lonic Naming Practice
Write the name of the following chemical compound:
Na3Cl1
Answer:
sodium chloride. .....
How do energy transformations occur in a hydroelectric plant?
The potential energy of water is converted to mechanical energy by a turbine.
The kinetic energy of water is converted by a dam into potential energy.
The kinetic energy of water is converted by a generator into electric energy.
The potential energy of water is converted by a transformer into electric energy.
Answer:
The answer is #3: The kinetic energy of water is converted by a generator into electric energy.
Explanation:
Hydropower plants capture the energy of falling water to generate electricity. A turbine converts the kinetic energy of falling water into mechanical energy. Then a generator converts the mechanical energy from the turbine into electrical energy.