If a rod attached to the approaching charge if the rod consists of "stiff" spring-like bonds for which atoms undergo small oscillations. What can we say, about these springlike bonds when the charge is first, furthest away and second, closest to the source charge

Answer:

W = 24 J

Explanation:

Given that,

Applied force, F = 60 N

Distance moved, d = 40 cm = 0.4 m

We need to find the work done by the carpenter. We know that,

Work done, W = Fd

Put all the values,

W = 60 N × 0.4 m

= 24 J

Hence, the required work done is equal to 24 J.

Substance:-

Answer:

  τ = 36 10⁻³ s

Explanation:

The charge of a circuit Rc is given by the expression

          q = q₀ (1 - [tex]e^{-t/ \tau }[/tex])

          q / q₀ = 1 - e^{-t/  \tau }

in this exercise they indicate that

          q / q₀ = ½

for a time t = 25 10⁻³ s

we substitute

          ½ = 1 - [tex]e^{- 25 \ 10^{-3} / \tau}[/tex]

          e^{- 25 \ 10^{-3} /  \tau} =  1 -½

         - 25 10⁻³ /τ = ln 0.5

         -25 10⁻³ / ln 0.5 = τ

         τ = 36 10⁻³ s

Answer:

density should always be positive, you must have missed a sign somewhere

Answer:

1. The best definition of refraction is ____.

a. passing through a boundary

b. bouncing off a boundary

c. changing speed at a boundary

d. changing direction when crossing a boundary

Answer: D

Bouncing off a boundary (choice b) is reflection. Refraction involves passing through a boundary (choice a) and changing speed (choice c); however, a light ray can exhibit both of these behaviors without undergoing refraction (for instance, if it approaches the boundary along the normal). Refraction of light must involve a change in direction; the path must be altered at the boundary.

Answer:

Length of the wire in meters​ = 0.000628 meter (Approx.)

Explanation:

Given:

Diameter of wire = 0.2 mm

Find:

Length of the wire in meters​

Computation:

Radius of wire = 0.2 / 2

Radius of wire = 0.1

Length of the wire = Circumference of circle

Circumference of circle = 2πr

Length of the wire = 2πr

Length of the wire = 2(3.14)(0.1)

Length of the wire = 0.628 mm (Approx.)

1 meter = 1,000 mm

So,

Length of the wire in meters​ = 0.000628 meter (Approx.)

Answer:

the final pressure of the gas is 60 kPa.

Explanation:

Given;

initial pressure of the gas, P₁ = 50 kPa = 50,000 Pa

initial temperature of the gas, T₁ = 27⁰ C = 27 + 273 = 300 k

final temperature of the gas, T₂ = 87⁰ C = 87 + 273 = 360 K

Let the final pressure of the gas = P₂

Apply pressure law;

[tex]\frac{P_1}{T_1} = \frac{P_2}{T_2} \\\\P_2 = \frac{P_1T_2}{T_1} = \frac{50,000 \times 360}{300} = 60,000 \ Pa = 60 \ kPa[/tex]

Therefore, the final pressure of the gas is 60 kPa.

Answer:

592000 J

Explanation:

We'll begin by converting 3.7×10⁵ Pa to Kg/ms². This can be obtained as follow:

1 Pa = 1 Kg/ms²

Therefore,

3.7×10⁵ Pa = 3.7×10⁵ Kg/ms²

Next, we shall determine the workdone.

Workdone is given by the following equation:

Workdone (Wd) = pressure (P) × change in volume (ΔV)

Wd = PΔV

With the above formula, the work done can be obtained as follow:

Pressure (P) = 3.7×10⁵ Kg/ms²

Change in volume (ΔV) = 1.6 m³

Workdone (Wd) =?

Wd = PΔV

Wd = 3.7×10⁵ × 1.6

Wd = 592000 Kgm²/s²

Finally, we shall convert 592000 Kgm²/s² to Joule (J). This can be obtained as follow:

1 Kgm²/s² = 1 J

Therefore,

592000 Kgm²/s² = 592000 J

Therefore, the Workdone is 592000 J.

Answer:

Moment is the product of force and its perpendicular distance from a point along its line of action.

The net moments on clockwise and anticlockwise is zero at a point.

The net force applied on a spanner handle is equal to the moment of the rotation

Answer: The energy incident on the solar panel during that day is [tex]9.24 \times 10^{7} J[/tex].

Explanation:

Given: Mass = 250 kg

Initial temperature = [tex]16^{o}C[/tex]

Final temperature = [tex]38^{o}C[/tex]

Specific heat capacity = 4200 [tex]J/kg^{o}C[/tex]

Formula used to calculate the energy is as follows.

[tex]q = m \times C \times (T_{2} - T_{1})[/tex]

where,

q = heat energy

m = mass of substance

C = specific heat capacity

[tex]T_{1}[/tex] = initial temperature

[tex]T_{2}[/tex] = final temperature

Substitute the values into above formula as follows.

[tex]q = 250 kg \times 4200 J/kg^{o}C \times (38 - 16)^{o}C\\= 250 kg \times 4200 J/kg^{o}C \times 22^{o}C[/tex]

As it is given that water absorbs 25% of the energy incident on the solar panel. Hence, energy incident on the solar panel can be calculated as follows.

[tex]\frac{25}{100} \times q = 250 kg \times 4200 J/kg^{o}C \times 22^{o}C\\q = 9.24 \times 10^{7} J[/tex]

Thus, we can conclude that the energy incident on the solar panel during that day is [tex]9.24 \times 10^{7} J[/tex].

Answer:

matter is any substance that has mass and takes up space by having volume.

Explanation:

Matter is anything that has a mass and it takes up space or has a volume .

matters are made up many atoms or molecules .

hope it is helpful to you

stay safe, happy and healthy

Answer:

Explanation:

Force= (q1q2)/(4/\Ęr2)

3×10^6= (1.602×10^-19)^2/(r^2)

r^2=(2.27×10^-33)/(3×10^6)

r^2=8.55×10^-45

r= 9.25×10^-23

Answer: C. The material

Explanation:

In order to check whether a material conducts electricity, the first thing to do would be to design a circuit. Connect a positive wire to the batteries and then another wire from the battery to the bulb and then a wire from the bulb as well.

Then bring different materials to test for conductivity by connecting the wires to the material. If the bulb lights then it is a conductor and if it doesn't the material is not a conductor. The material is therefore the changing variable.

The process of filtration of swamp water using a filtering material such as neat clothes will make the water clearer and remove any bad smell.

Filtration is a separation technique used to separate insoluble solids from a liquid.

Filtration is employed in water purification.

Water purification is done in water purification plants.

A locally designed purification process for swamp water will involve using materials such as:

The T-shirt is used filter out mud and sediments.

Repeated filtrations will make the water clearer and remove any bad smell.

Learn more about filtration at: https://brainly.com/question/552187

Answer:

250mn

Explanation:

Answer:

Explanation:

We need 2 different equations for this problem: first the velocity of sound equation, then the frequency of the sound equation.

The velocity of sound is found in:

v = 331.5 + .606T

We need to find that first in order to fill it into the frequency equation which is

[tex]f=\frac{v}{\lambda}[/tex] where v is the velocity we will find the part a, f is frequency and lambda is the wavelength. Starting with the velocity of the sound:

v = 331.5 + .606(25) and

v = 331.5 + 15 and rounding correctly using the rules for sig fig when adding:

v = 347 m/s

Filling that into the frequency equation:

[tex]75=\frac{347}{\lambda}[/tex] and

[tex]\lambda=\frac{347}{75}[/tex] so

[tex]\lambda=4.6m[/tex]

Answer:

The correct answer is "20 Volts".

Explanation:

Given:

Heat,

H = 100 J

Resistance,

R = 4 Ω

As we know,

⇒ [tex]P=\frac{v^2}{R}[/tex]

By putting the values, we get

⇒ [tex]100=\frac{v^2}{4}[/tex]

⇒  [tex]v^2=100\times 4[/tex]

⇒       [tex]=400[/tex]

⇒    [tex]v=\sqrt{400}[/tex]

⇒       [tex]=20 \ volts[/tex]

Answer:

0.66

Explanation:

Follow the Density Formul d = m/v

so

d = 5.29/8

= 0.66 Density

Just correct me if I'm wrong, I mean like literally :> Thank you! ^^

Answer:

increasing wavelength near beach

Explanation:

When wavelength increases, frequency of these waves decreases and the waves suddenly stop.

This is also called damped oscillation.

Answer: hey, i hope this hlps!~~~ Part of mental health is how well your mind processes and understands information and experiences. In contrast, emotional health involves your ability to manage and express the emotions that arise from what you have learned and experienced.

Explanation:

Answer:

Explanation:

You didn't fill in the proper masses which is why you never got an answer to this. But that's ok...I got you. I happen to know what they are! We will use the universal law of gravitation and the gravitational constant to solve this.

[tex]F_g=\frac{Gm_1m_2}{r^2}[/tex] and filling in:

[tex]F_g=\frac{(6.67*10^{-11})(5.98*10^{24})(7.36*10^{22})}{(3.84*10^8)^2}[/tex] The denominator is the radius of the earth plus the radius of the moon plus the distance between their surfaces, just FYI.

That gives us that

[tex]F_g=1.99*10^{20}N[/tex] Not sure what your choices entail, but I'd have to say, taking into consideration that maybe your problem didn't figure in the distance between the surfaces, you'd be at choice B.

Answer:

36000

Explanation:

1/2mv²=0.5×500×12²=36000j

Answer:

Note that:

Particles in a:

gas are well separated with no regular arrangement.

liquid are close together with no regular arrangement.

solid are tightly packed, usually in a regular pattern.

Explanation:

Yeah, hand signals are important in officiating games. The hand signals are given by the referee who first signals the fault and then indicates which team has won the point. A point is indicated by one finger at the side of the court to indicate the winner of the rally.

Answer:

O 296N

Explanation:

F_y = F*sin(x)

F_y = 700N*sin(25°)

F_y = 295.83N or 296N

Answer:

It is connected in series with the circuit

Explanation:

This is because to measure the current in the circuit, the current in the circuit has to flow through the ammeter. As such, the ammeter must be connected in series with the circuit so as to measure the current flowing through the circuit.

So, to measure the current flowing through a circuit with an ammeter, the ammeter must be connected in series with the circuit.

Answer:

YOUR answer is given below:

Explanation:

Drug B will retain the highest percentage of initial concentration.

First order degradation means that both solution will degrade by same amount in same time because first order is directly proportional relationship between given both aqueous solution.

Given that Ten (10) ml aqueous solutions of drug A (10% w/v) and drug B (25% w/v) are stored in two identical test tubes.

Since, initially concentration of Drug B is more. Therefore, at all instant concentration of Drug will be highest.

Learn more:

brainly.com/question/17029235

Answer:

According to the law of conservation of energy, energy is neither created nor destroyed but changes from one form to another

The energy in the light bulb comes from the movement of electrons through the resistance of the coil of the bulb, therefore, the energy in the bulb is changed from electric energy to heat and light energy as follows;

The friction between the moving electrons and the resistive filament of the light bulb results in the slowing down of the rapidly moving electrons

The part change in the (kinetic) energy of the electrons moving through the filament of the bulb as they slow down is observed as sensible heat which causes the bulb to be hot

Another part of the change in energy is given seen as the light given off by the bulb filament in an incandescent bulb as the filament becomes very hot from the movement of the electrons which causes the bulb to glow (produce light), due to the incandescent characteristics of the filament

Explanation:

Answer:

I completely agree with the first person's response.

Explanation:

They deserve Brainliest. Have a great summer.