Answer:
If effort distance was 4 times, efficiency would be 100%.
Since it takes 5 times for effort distance, efficiency drops to output/input
output is 1*F
input is (1/4*F)*5
so: F/1/5*F/4 = 4F/5F = .8 or 80%
The efficiency of the lever is 80%.
To calculate the efficiency of the lever, we can use the formula for mechanical advantage and efficiency.
Mechanical Advantage (MA) is the ratio of the load (L) to the effort (E) in a lever system:
MA = Load / Effort
Given that the load is four times the effort applied:
Load = 4 * Effort
Also, the effort distance (dEffort) is five times the load distance (dLoad):
dEffort = 5 * dLoad
Now, we can write the formula for efficiency (η) of a lever system:
Efficiency (η) = (Mechanical Advantage / Ideal Mechanical Advantage) * 100%
The Ideal Mechanical Advantage (IMA) is the ratio of the effort distance to the load distance:
IMA = dEffort / dLoad
Substitute the given values into the IMA equation:
IMA = (5 * dLoad) / dLoad
IMA = 5
Now, we can calculate the Mechanical Advantage (MA) using the relationship between the load and effort:
MA = Load / Effort
MA = (4 * Effort) / Effort
MA = 4
Finally, we can calculate the efficiency (η):
Efficiency (η) = (Mechanical Advantage / Ideal Mechanical Advantage) * 100%
η = (4 / 5) * 100%
η = 0.8 * 100%
η = 80%
The efficiency of the lever is 80%.
To know more about efficiency here
https://brainly.com/question/31458903
#SPJ2
A car has a mass of 2000 kg. While it is traveling along a perfectly flat road, it goes around an unbanked turn that has a radius of 40.0 m. The coefficient of static friction between the car tires and the road is 0.500. The car travels successfully around the turn at a constant speed of 10.0 m/s. Calculate the magnitude of the car's acceleration as it goes around the turn. _______ m/s^2
Answer:
2.5 m/s²
Explanation:
The given parameters are;
The mass of the car, m = 2,000 kg
The radius of the car, r = 40.0 m
The coefficient of friction between the car tires and the road, μ = 0.500
The constant speed with which the car moves, v = 10.0 m/s
The normal reaction of the road on the car, N = The weight of the car;
∴ N = m × g
Where;
g = The acceleration due to gravity ≈ 9.81 m/s²
N ≈ 2,000 kg × 9.81 m/s² = 19,620 N
The frictional force, [tex]F_f[/tex] = μ × N
The centripetal force, [tex]F_c[/tex] = m·v²/r
The car moves without slipping when [tex]F_f[/tex] = [tex]F_c[/tex]
Therefore, [tex]F_f[/tex] = 0.500 × 19,620 N = 2,000 kg × [tex]v_{max}[/tex]²/40.0 m
∴ [tex]v_{max}[/tex] = √(0.500 × 19,620 N × 40.0 m/2,000 kg) ≈ 14.007 m/s
Therefore, the velocity with which the car moves, v < [tex]v_{max}[/tex]
The cars centripetal acceleration, [tex]a_c[/tex] = v²/r
∴ [tex]a_c[/tex] = (10.0 m/s)²/40.0 m = 2.5 m/s²
The cars centripetal acceleration as it goes round the turn, [tex]a_c[/tex] = 2.5 m/s².
Calculate the upthrust on a object immersed in water if the object displace water of mass 2 kg.(g=9.8m/s²)
Thrust is force
Mass=2kgAcceleration due to gravity=g=9.8m/s^2Using Newtons Second law
[tex]\boxed{\sf Force=Mass\times Acceleration}[/tex]
[tex]\\ \qquad\quad\sf{:}\dashrightarrow Thrust=2(9.8)[/tex]
[tex]\\ \qquad\quad\sf{:}\dashrightarrow Thrust=19.6N[/tex]
We have that the the upthrust on a object immersed in water is
[tex]U=19.6N[/tex]
From the Question we are told that
mass= 2kg
Gravity g=9.8m/s^2
Generally the equation for the upthrust is mathematically given as
[tex]U=mg[/tex]
Therefore
[tex]U=2*9.8[/tex]
[tex]U=19.6N[/tex]
For more information on this visit
https://brainly.com/question/1519601
6.
For a given prism the angle of incidence is changed from 0° and 90', the angle of deviation [ ]
b) decreases
c) first decreases and then increases
d) first increases and then decreases
a) increases
Answer:
increase
Explanation:
please mark as brainlyest
Answer
A.Increses
Explanation:
importance of estimation in our lives
calculate the potential energy stored in a meta ball of mass of 80 kg kept at a height of 15m from the earth surface . What will be the potential energy when the metal ball is kept on the earth surface Take (g- 9.8 m/s]
Answer:
11760 J
Explanation:
cuz potential engery is PE = MHG
SO 80×15×9.8= 11760 J
Answer:
11769j
Explanation:
here,
mass(m)=80 kg
height(h)=15m
acceleration due to gravity(g)=9.8m/s^2
now,
potential energy = m×g×h
= 80×9.8×15
= 11760j
what is the Ramsar convention?
Write the dimension of a / b in the x = at + bt2. Where x is the distance and t is the time?
The dimension of a/b where x is the distance and t is the time is T
Given the expression
x = at + bt²
where
x is the distance
t is the time
Based on the homogeneity principle, the expression on the left-hand side must be equal to that on the right. Hence;
x = at
[tex]a = \frac{x}{t}[/tex]
Since x is the distance and distance is measured in metres, the dimension equivalent will be the length 'L'
Since t is the time and time is measured in seconds, the dimension equivalent will be the seconds 'T'
[tex]a=\frac{L}{T}[/tex]
Similarly;
x = bt²
[tex]b=\frac{x}{t^2}\\b=\frac{L}{T^2}[/tex]
Next is to get a/b;
[tex]\frac{a}{b} = \frac{L}{T} \div \frac{L}{T^2}\\\frac{a}{b} = \frac{L}{T}*\frac{T^2}{L} \\\frac{a}{b} =\frac{T^2}{T}\\\frac{a}{b} =T[/tex]
Hence the dimension of a/b is T
how do u calculate the kinetic energy of a ball of mass 0.25kg being kicked vertically upwards with a speed of 5m/s
Answer:
3.125J
Explanation:
K.E.= 1/2(mass)(velocity)^2
K.E.=1/2(0.25)(5)^2=3.125
can someone please help me with a and b? what do they mean by amplitude?
Explanation:
first answer is that the to and fro movement of a pendulum is known as amplitude
Which of the following best describes reverberation?
A.The wave fronts become mixed and broken up due to contact with a rough or
irregular surface.
B. A change in the sound wave velocity causes the wave to bend in a different
direction.
C. A fraction of the sound waves are absorbed by an object and converted to heat
energy.
D. A single sound undergoes several reflections due to multiple reflecting surfaces.
Reverberation, in psychoacoustics and acoustics, is a persistence of sound after the sound is produced
Explanation:
I think it is right hope its helps
Answer:
D. A single sound undergoes several reflections due to multiple reflecting surfaces.
Explanation:
Sometimes, the source of a sound is surrounded by multiple reflecting surfaces. The waves traveling from the source strike these different surfaces, causing multiple reflections. For example, a single clap of thunder reflects on several clouds and the earth's surface, causing you to hear a rolling rumble instead of a single sound.
help me please i will mark as brainliest
Answer:
you would be paying $1845.26
Please help have due very soon?thank you
please help urgent have you ever seen the old “Pull the tablecloth out from under the dishes” trick? Use Newton’s 1st Law to explain the following:
a. In this trick, are the dishes “objects in motion,” or “objects at rest?”
b. If the dishes end up staying on the table, was an UNBALANCED FORCE applied to them? How do you know?
Answer:
I kinda dont remember the 1st law so search it up on
and it should tell u , but if u need any help from the
Hideki had normal vision for most of his life, but now that he is in his 60s, he has started to have difficulty focusing on near objects. He went to an optometrist, who explained that his vision problem was the result of the lenses in his eyes losing elasticity due to aging. Which condition does Hideki have
Answer:
He is suffering from hypermetropia.
Explanation:
There are some defects of vision.
Longsightedness of hypermetropia : It is the defect of vision in which the person is not able to see the nearby objects clearly but can see the far off objects clearly. This is due to the elongation of size of eye ball. It is cured by using convex lens of suitable focal length.
Nearsightedness or Myopia : It is the defect of vision in which a person is not able to see the far off objects clearly but can see the nearby objects clearly. It is due to the contraction in the size of eye ball. It is cured by using concave lens of suitable focal length.
So, Hideki is suffering from hypermetropia. So, he should use the convex lens of suitable focal length.
A glass rod acquires charge by rubbing silk cloth. The charge on the glass is due to:
(a) Friction
(b) Conduction
(c) Induction
(d) Radiation
Answer:
(a)Friction
Explanation:
It is due to friction as you are rubbing the glass rod with silk cloth
as friction occurs when 2 surfaces are rubbed against each other
Therefore it is charging by friction
Suppose that people living near a particular​ high-voltage power line have a higher incidence of cancer than people living farther from the power line. Can you conclude that the​ high-voltage power line is the cause of the elevated cancer​ rate? If​ not, what other explanations might there be for​ it? What other types of research would you like to see before you conclude that​ high-voltage power lines cause​ cancer?
Complete Question
Complete Question is attached below
Answer:
a)Option B
b)Option B
Explanation:
a)
Without any confirmation it will be utterly wrong to conclude that high power voltage is the reason for the elevated cancer cases
Therefore
Option B
b)
The High Concentration of cells volume in a part of the Body is what causes Cancer
Therefore
Option B
give one example where friction is a hindrance.
Answer:
an example of when friction is a hindrance, is if someone with shorts is sliding down a slide. their skin rubbing on the slide will cause friction and will slow them down. another example is if you're dragging a large wooden box across the floor. the wood and the floor interacting cause friction and will make it more difficult to push the box.
Explanation:
hope this helps :D
........................
Answer:
14°F = 263.15 K
31°F = 272.594 K
71°F = 294.817 K
35°F = 274.817 K
Explanation:
Use the formula 273.15 + ((°F–32)•5)/9
One possible unit of speed is
Answer:
option d
Explanation:
Meter per second
solve two questions under inclined plane using Newton 2nd law
Explanation:
If the mass of the inclined plane is large enough, could N ever be equal to mgcosθ. Reasons?
So far I've come up with: mgcosθ−N=ma meaning if N were to equal mgcosθ, ma=0. Since the surfaces are frictionless and since N is acting on the inclined plane too(it'll have a horizontal component), this isn't possible. Am I right? Where am I going wrong?
please help me with this I really need help
Answer:
Ask with your Science teacher
Explanation:
i do not know the ans
Which type of reactions usually happens slowest?
Answer:
option b is correct..................
Why do scientists not use US customary units when reporting their data?
One of the scientist's jobs is to report the results of his experiments to all the other scientists in the world.
There isn't a single real science shop anywhere in the world that uses the US customary system of units. Not one.
Even in the measly three countries that use it for measuring carpet, pumping gas, and weighing fish ... Myanmar, Liberia, an the USA ... the scientists do their work in the SI/MKS/metric system.
is noise energy a kind of energy or not
The sky is blue because: Select one: a. the index of refraction for air is slightly larger for blue than for red b. atomic hydrogen is blue c. air molecules tend to polarize light along a horizontal axis d. oxygen and nitrogen molecules are small compared to the wavelengths of visible light e. oxygen molecules have a lower energy ground state than nitrogen molecules
Answer:
a. the index of refraction for air is slightly larger for blue than for red
A variable is a letter that stands in for a number and unit... True or False?
Write down the role played by four digestive juices in digestion and the
organs which secrete them.
Answer:
Explanation:Digestive juices secreted by various organs such as salivary glands in the mouth, stomach, liver and pancreas help in the process of digestion of food. Saliva secreted by the salivary glands in the mouth aids in the breakdown of starch present in the food to simple sugar
Invisible damage to the body resulting from repeating a movement often is a
What the suns mass in scientific notation????
Explanation:
In scientific notation the Sun's mass is: =1.989 x 10 ^30 kg
Answer:
I think in scientific notation the Sun's mass becomes: M Sun = 1.989 x 10 30 kg. The number above the ten, called the power of ten or exponent, stands for the number of decimal places. If it is positive, as in the mass of the Sun, the decimal places are in front of the decimal point.
I hope this help you!:)
In----- theory, the actual wishes that are threatening to the dreamers conscious awareness are disguised
Answer:
Unconscious wish fulfillment
Explanation:
Unconscious wish fulfillment
(In the unconscious wish fulfillment theory, the actual wishes of the dreamer that are threatening to the dreamer's conscious awareness are disguised.)
