Answer:
The proportionality constant ( Henry’s constant) = 2.32 * 10^-5 M/kPa
Explanation:
Here in this question, we are concerned with calculating the proportionality constant for this gas.
Mathematically, we can get this from Henry law
From Henry law;
Concentration = Henry constant * partial pressure
Thus Henry constant = concentration/partial pressure
Henry constant = 0.00290 M/125 kPa = 2.32 * 10^-5 M/kPa
An atom of nitrogen has seven electrons. Which diagram correctly represents the arrangement of these electrons?
ОА.
OB
1112
1s 11:28 1111
2p
1s 12
2p
1s 12
12s 2p
OD. 1111s 112s
112p
Ос.
Answer:
Option C.
Explanation:
The arrangement of electrons in their orbital follows certain rules.
The Hund's rule practically explained how electrons are distributed in their orbitals.
The Hund's rule states that electrons distributed among the orbitals of the same shell singly (without partner) before pairing occurs.
In the filling of these electrons in their orbitals, we fill in the electron without pairing first because electrons tends to repel each other before filling with the opposite spin as shown in the attached photo.
Which correctly describe a reversible reaction reaching equilibrium in a closed system?
Select two that apply.
-Over time, the rates of the forward and reverse reactions equalize.
-Over time, the rate of the forward reaction becomes zero.
-Initially, the concentration of reactants is low, so the rate of the forward reaction is also low.
-Initially, the concentration of products is low, so the rate of the reverse reaction is also low.
-Over time, the rate of the reverse reaction becomes greater than the forward reaction.
Answer:
-Over time, the rates of the forward and reverse reactions equalize.
-Initially, the concentration of products is low, so the rate of the reverse reaction is also low.
Explanation:
A chemical reaction is said to be reversible when the reactants forms the products, which in turn reacts together again to give rise to the reactants. In a reversible reaction, the formation of products from reactants occurs simultaneously with the reformation of the reactants from the products. For example:
The reversible reaction: A + B ⇆ C + D means;
A + B → C + D and C + D → A + B
The rate at which both forward and reverse reactions are taking place in closed system may be initially different but with time, it gets equal to form an equilibrium reaction. However, at first, only the rate of the forward reaction proceeds because the concentration of the product is low. Hence, the rate of reaction of the reverse reaction (product to reactants) is low as well.
In the reversible reaction above, the rate of the reverse reaction (C + D → A + B) will turn out low initially because the concentration of the products (C and D) are low. With time, the rates of the forward and reverse reaction becomes equal to form an EQUILIBRIUM or STABLE reaction.
how will you measure the length of a curved line by using a thread?
Se someten a combustion 0,452g de un compuesto de C,H y N de masa molecular 80. Al recoger el CO2 y el H2O producidas obtenemos 0,994 g y 0,203 respectivamente. Determine formula empirica y formula molecular
Answer:
Fórmula empírica: C₂H₂N
Fórmula molecular: C₄H₄N₂
Explanation:
Un compuesto que contiene carbono hidrógeno y nitrógeno con fórmula CₐHₓNₙ es sometido a combustion produciendo:
CₐHₓNₙ + O₂ → aCO₂ + x/2 H₂O + nNO₂
Con la masa de dióxido de carbono y agua podemos encontrar las moles de carbono e hidrógeno y su aporte a los 0.452g de muestra que fueron puestos en combustión, así:
Moles C:
Moles C = Moles CO₂ = 0.994g CO₂ ₓ (1mol / 44g) = 0.0226 moles C
Masa C: 0.0226 moles C ₓ (12.01g / mol) = 0.271g Carbono hay en la muestra
Moles H:
Moles H = 2 Moles H₂O = 0.203g H₂O ₓ (1mol / 18g) = 0.0113 moles H₂O = 0.0226 moles H
Masa H: 0.0226 moles H ₓ (1.01g / mol) = 0.023g Hidrógeno hay en la muestra
Así, la masa de nitrógeno en la muestra y sus moles son:
Masa N = 0.452g - 0.271g C - 0.023g H
Masa N = 0.158g Nitrógeno
Y su moles son:
0.158g ₓ (1 mol / 14.01g) = 0.0113 moles N
Con las moles de C, H y N podemos determinar la formula empírica que se define como: "La relación de números enteros más simple entre la cantidad de átomos presentes en una mólecula. Si usamos como base las moles de nitrógeno (Valor menor):
Relación H/N: 0.0226 mol / 0.0113 mol = 2
Relación C/N: 0.0226 mol / 0.0113 mol = 2
Relación N/N: 0.0113 mol / 0.0113 mol = 1
Así, la fórmula empírica es:
C₂H₂NEsta fórmula empírica tiene una masa molar de:
2C = 2*12 g/mol = 24g/mol
2H = 2*1g/mol = 2g/mol
N = 14g/mol
24+14+2 = 40g/mol
Como la masa molecular del compuesto es 80g/mol (Dos veces la de la fórmula empírica, la fórmula molecular es 2 veces la fórmula empírica:
C₄H₄N₂what is non lustrous ?
Answer:
materials which do not show the quality of lustre i.e. shiney surface
for eg- non metals except Iodine
Explanation:
hope it helps u plz mark as the brainliest
Answer:
These are materials that don't have lustre
Explanation:
They are not shiny.
They include non-metals but not iodine.
Hope it helps.
am gonna cry plz answer Which is not an inter molecular force? Select one: a. Inter atomic bonds b. van der waals forces c. hydrogen bonds
Answer:
inter atomic bonds
Explanation:
because it is loosely held
WILL GIVE BRAINLIEST, Which of the following would have the greatest amount of surface area?
A. 1 cubic foot of watermelons
B. 1 cubic foot of matchbox cars
C. 1 cubic foot of loose sand
D. A 1 cubic foot block of concrete
Answer:
C. 1 cubic foot of loose sand
Explanation:
For many objects having equal volume , surface area will be maximum
of the object which has spherical shape .
But when a sphere is broken into tiny small spheres , total surface area of all the small spheres will be more than surface area of big sphere .
Hence among the given option , surface area of loose sand will have greatest surface area . Loose sand is equivalent to small spheres .
Answer:
the answer would be C 1 cubic foot of loose sand.
How many protons does an atom of zinc contain?
It contains an amount
a single neutral atom of zinc has 30 protons
Which statement best describes a compound formed by an ionic bond?
A) negatively charged
B) neutral
C) contains multiple charges
D) positively charged
Answer is D
Explanation:
Answer:
B. Neutral
Explanation:
When there is a ionic bond, one element steals or takes away an electron from the other element.
An example is NaCl
In this compound, Chlorine atom steals an extra electron from Sodium to fill its outer shell. So, this is a Ionic bond. Since, the Sodium compound gives away an atom, it is positively charged. Since, Chlorine steals an atom, it is negatively charged. Opposite charges attract, so they become a compound.
When positive and negative mix, it becomes neutral.
Can a window pane be considered a mineral?
Answer:
Explanation:
The glass (which does not crystallize even though it is accepted) of a window is NOT a mineral, since it is neither a substance of natural origin (although it is manufactured from natural components) nor does it have a defined crystalline structure, that is, the atoms they are not arranged in an orderly and regular way along axes and planes forming flat faces that keep a symmetry.
Remember that a mineral is defined as a solid, inorganic, homogeneous substance, of natural origin, with a crystalline structure and a determined and well-defined chemical composition within narrow margins and that has regular and characteristic physical properties.
Explanation: No, glass is not a mineral. ... Definable chemical composition: SiO2 *Actually, most industrially-produced glass is not pure silica, but having impurities is still a definable chemical composition so this part of the definition is ok. Orderly arrangement of atoms in a lattice: NO.
what is a disavanege for renewable solor power
pls balance the following chemical equation asap; Ca(OH)2 +CO2 = CaCO3+ H2O pls make it step by step
Answer:
Explanation:
Start by writing water as HOH
Ca(OH)2 +CO2 = CaCO3+ HOH
Next pay attention to the CO2 going to CO3
We need an oxygen.
Fortunately that is provided by the (OH)2
Now we have
Ca(OH)2 + CO2 ==> CaCO3 + HOH
and believe it or not, that is balanced as it is
The left side has 1 Ca. So does the right side
The Left side has 1 C. So does the right side.
The left side has 2 H. So does the right side
The left side has 2 oxygens (in Ca(OH2)) + 2 oxygens in CO2
So the equation is balanced.
fill in the blanks with the words given below-
[Atoms, homogeneous, metals, true, saturated, homogeneous, colloidal, compounds, lustrous]
1.An element which are sonorous are called................
2.An element is made up of only one kind of ....................
3.Alloys are ............................. mixtures.
4.Elements chemically combines in fixed proportion to form ........................
5. Metals are................................... and can be polished.
6. a solution in which no more solute can be dissolved is called a .................... solution.
7. Milk is a .............. solution but vinegar is a .................. solution.
8. A solution is a ................... mixture.
pls help, could not get these answers
Answer:
1. Metal.
2. Atom.
3. Homogeneous
4. Compounds.
5. Lustrous
6. Saturated.
7. Colloidal; true.
8. Homogeneous.
Explanation:
1. An element which are sonorous are called metal.
2. An element is made up of only one kind of atom.
3. Alloys are homogeneous mixtures.
4. Elements chemically combines in fixed proportion to form compounds.
5. Metals are lustrous and can be polished.
6. A solution in which no more solute can be dissolved is called a saturated solution.
7. Milk is a colloidal solution but vinegar is a true solution.
8. A solution is a homogeneous mixture.
When might Accurate length measurement be important?
Answer:
When you are going to measure small lengths or objects or when you are going to measure things with great accuracy.
Explanation:
what is an example of mechanical energy converting to heat energy?
Answer:
Rubbing your hands together converts mechanical energy to thermal energy. Turning on a light switch converts mechanical energy to electrical and radiant energy.
List down the observations made by Rutherford during the gold foil experiment.
Answer:
1) The volume occupied by an atom is composed of mainly empty space
2) Atoms have a very small, relatively dense, central nucleus that is positively charged
3) The region around the nucleus of an atom are orbited by negatively charged electrons in a the same fashion planets orbit around the Sun.
Explanation:
The selection of gold for the gold foil experiment was due to its ability to be rolled into extremely thin sheets such that it was expected for alpha particle to perforate or pass through the foil.
which statement is true about this reaction 14/7n + 1/1h ------> 15/8o
A. it is a practical source of energy on earth
B.it occurs only outside the solar system
C.its product is heavier than each of its reactants
D.it shows the critical mass of an element
Answer: answer is C
Explanation:
Its product is heavier than each of its reactants is true about this ₇N¹⁴ + ₁H¹ → ₈O¹⁵ reaction
What is Nuclear reaction ?A nuclear reaction is a reaction in which one or more than one nuclides are generate and it collides between two atomic nuclei or one atomic nucleus.
The reaction is
₇N¹⁴ + ₁H¹ → ₈O¹⁵
Now equating the mass number of both sides
14 + 1 = 15 + a
a = 0
Equating atomic number of both sides
7 + 1 = 8 + x
x = 0
Thus, we can say that its product is heavier than each of its reactants is true about this reaction
Hence, option C is correct answer.
Learn more about Nuclear reaction here: https://brainly.com/question/25387647
#SPJ2
Which of the following is not equal to 485 L?
0.485 kL
4.85 x 104 mL
48,500 cL
4.85 x 108 µL
Answer:
[tex]4.85 * 10^4\ mL[/tex]
Explanation:
Given
485 L
Required
Determine the measurement not equal to 485L
[tex]0.485\ kL[/tex]
From standard unit of conversion;
1 KL = 1000 L
Multiply both sides by 485
[tex]485 * 1 KL = 485 * 1000 L[/tex]
[tex]485KL = 485000L[/tex]
Divide both sides by 1000
[tex]\frac{485KL}{1000} = \frac{485000L}{1000}[/tex]
[tex]0.485KL = 485L[/tex] ---- This is equivalent
---------------------------------------------------------------------------------------------
[tex]4.85 * 10^4\ mL[/tex]
From standard unit of conversion;
1000 mL = 1 L
Multiply both sides by 485
[tex]485 * 1000 mL = 1 L * 485[/tex]
[tex]485000\ mL = 485\ L[/tex]
Convert to standard form
[tex]4.85 * 10^5\ mL = 485\ L[/tex]
Hence; [tex]4.85 * 10^4\ mL[/tex] is not equivalent to 485L
---------------------------------------------------------------------------------------------
[tex]48500 \ cL[/tex]
From standard unit of conversion;
100 cL = 1 L
Multiply both sides by 485
[tex]485 * 100 cL = 1 L * 485[/tex]
[tex]48500\ cL = 485\ L[/tex]
Convert to standard form
[tex]4.85 * 10^4\ cL = 485\ L[/tex] ---- This is equivalent
---------------------------------------------------------------------------------------------
[tex]4.85 * 10^8 \[/tex] μL
From standard unit of conversion;
1000000 μL = 1 L
Multiply both sides by 485
[tex]485 * 1000000uL = 1 L * 485[/tex]
[tex]485000000uL = 485\ L[/tex]
Convert to standard form
[tex]4.85 * 10^8\ uL = 485\ L[/tex] ---- This is equivalent
From the list of given options;
[tex]4.85 * 10^4\ mL[/tex] is not equivalent to 485L
Mike wants to galvanize iron to protect it from rusting. Which metal should he use?
A
platinum
B.
aluminum
C.
copper
D.
zinc
E.
tungsten
Answer:
D. Zinc.
Explanation:
Galvanization is a metal-coating process which involves the application of a thin layer of zinc to an iron or steel, so as to prevent rusting or corrosion.
The zinc metal protects the iron from rusting by sealing the surface of the iron and thus, preventing weathering and oxidation.
Hence, if Mike wants to galvanize iron to protect it from rusting. The metal he should use is zinc (Zn) because a coating of zinc would protect the iron (Fe) by corroding first when exposed to moisture or the atmosphere.
Answer:
b
Explanation:
calculate the atomic number of an element whose neutral atom has four electrons in its valence shell and its valence shell is the m shell
Answer:
The atomic number of the atom is 14.
Explanation:
The following data were obtained from the question:
Valence electrons = 4
Atomic number =.?
From the question given, we were told that the valence electron is in the m shell. Thus, we can say:
M shell = 4 electrons
The number of shells of the atom can be written in the order K, L, M with M as the last shell because we were told that the valence electrons i.e electrons in the outer shell is located at the M shell.
From a detailed knowledge of atom,
K shell = 1st shell
L shell = 2nd shell
M shell = 3rd shell
The first shell, K of an atom can only accommodate 2 electrons while others can accommodate a maximum of 8 electrons.
Note: we can only put electrons in another shell if a shell is already having 8 electrons. This rule only applies to the 2nd shell and above.
Thus, the atom in question has the following electrons:
K shell = 1st shell = 2 electrons
L shell = 2nd shell = 8 electrons
M shell = 3rd shell = 4 electrons
To get the atomic number of the atoms, we simply add all the electrons together.
This is illustrated below:
Atomic number = 2 + 8 + 4
Atomic number = 14
Therefore, the atomic number of the atom is 14.
Answer:
The answer on Edge is,
C. the number of valence electrons an atom has
D. Answer these questions.
1. What is chemistry?
2. What is scientific method?
Answer:
1.Chemistry is the scientific discipline involved with elements and compounds composed of atoms, molecules and ions: their composition, structure, properties, behavior and the changes they undergo during a reaction with other substances.
2.The scientific method is an empirical method of acquiring knowledge that has characterized the development of science since at least the 17th century. It involves careful observation, applying rigorous skepticism about what is observed, given that cognitive assumptions can distort how one interprets the observations.
An event planner accidentally leaves a tray of cupcakes in his car for several hours on a sunny day. When he returns, the formerly firm frosting is now runny and wet to the touch. Which answer choice best describes what happened in this scenario? The particles of frosting released energy to their surroundings and changed from the solid to the liquid state. The particles of frosting released energy to their surroundings and changed from the liquid to the solid state. The particles of frosting absorbed energy from their surroundings and changed from the solid to the liquid state. The particles of frosting absorbed energy from their surroundings and changed from the liquid to the solid state.
Answer:
The particles of frosting absorbed energy from their surroundings and changed from the solid to the liquid state.
Explanation:
On a sunny day, the energy of the particles in the surrounding is higher than the energy of the frosting tray of cupcakes.
As a result of the exchange of energy between the tray of cupcakes and the surrounding, the tray of cupcakes absorbs energy from the surrounding. When this occurs, the firm frosting is now converted from solid to liquid which is runny and wet to touch, hence the answer above.
Answer it answer it answer it
Answer:
[tex]\Large \boxed{\mathrm{A}}[/tex]
Explanation:
Rust formed from iron and oxygen combining is a chemical change, because in a chemical change, the resulting substance(s) will have different properties from the substance(s) before the chemical change.
I cant comment... So is it Right?
One to two paragraphs describing the water cycle
Answer:
The water cycle or hydrologic is a continuous cycle where water evaporates, travels into the air and becomes part of a cloud, falls down to earth as precipitation, and then evaporates again. This repeats again and again in a never-ending cycle. Water keeps moving and changing from a solid to a liquid to a gas, over and over again.
Precipitation creates runoff that travels over the ground surface and helps to fill lakes and rivers. It also percolates or moves downward through openings in the soil to replenish aquifers under the ground. Some places receive more precipitation than others do. These areas are usually close to oceans or large bodies of water that allow more water to evaporate and form clouds. Other areas receive less precipitation. Often these areas are far from water or near mountains. As clouds move up and over mountains, the water vapor condenses to form precipitation and freezes. Snow falls on the peaks.
The continual movement of water on, above, and below the Earth's surface is referred to as the water cycle, also known as the hydrological cycle.
What is water cycle ?The water cycle demonstrates how water is constantly moving both inside the Earth and in the atmosphere. It is a complicated system with a wide range of processes.
Water vapor is created when liquid water evaporates, and this water vapor then condenses to form clouds and falls back to earth as rain and snow.
The constant flow of water between the ground and the atmosphere is known as the water cycle. Water travels to land as precipitation, like snow and rain.
The cycle is then completed by the water evaporating, condensing into clouds in the atmosphere, and precipitating once more on earth. The water cycle is composed mostly of four processes: evaporation, convection, precipitation, and collection.
Thus, The continual movement of water on, above, and below the Earth's surface is referred to as the water cycle.
To learn more about the water cycle, follow the link;
https://brainly.com/question/1151425
#SPJ2
A mixture of reactants and products for the reaction shown below is at
equilibrium in a 2.0 L container. What would most likely happen to the
equilibrium if the volume of the container were increased to 4.0 L?
N.(g) + 3H2(g)
22NH3(g)
Answer:
The system will shift to the left producing more moles of gases trying to maintain the original pressure of the system
Explanation:
Based on LeChatelier's principle, a change in temperature, pressure, volume or concentration on a system result in an opposing change trying to maintain the initial equilibrium conditions.
In the reaction:
N₂(g) + 3H₂(g) ⇄ 2NH₃(g)
4 moles of gas reacts producing 2 moles of gas.
In a gas reaction, the system will try to maintain the total pressure.
If the volume of the container increases, the system will shift to the side of the reaction that has more moles of gases in order to maintain the pressure.
That means if in the reaction the volume of the container increase from 2.0L to 4.0L the system will shift to the left producing more moles of gases trying to maintain the original pressure of the system.
oxidation number of Fe in Fe2(CO3)2
Answer:
+2
Explanation:
Oxidation number of an element, also called its oxidation state, is the number of electrons its atoms lost or gain in the process of forming a chemical compound.
To determine the oxidation state of an element or compound;
- The sum of all the oxidation numbers in a neutral compound must equal zero (0).
In the compound: Fe2(CO3)2
This compound is a neutral one, hence, its oxidation state is equal to zero (0).
It contains a polyatomic ion (carbonate ion) i.e. CO3 2-, whose net charge is -2.
Hence, to find the oxidation number of Iron (Fe), which is represented by X, in the compound, we say;
X(2) + -2(2) = 0
2X + -4 = 0
2X - 4 = 0
2X = 4
X = +2
Therefore, the oxidation number of Fe in Fe2(CO3)2 is (+2)
The compound Fe2(CO3)2 is called Iron (II) carbonate
Oxidation number of Fe in [tex]\rm Fe_2(CO_3)_2[/tex] is 2. An atom's oxidation number is a positive or negative number.
A notion used in chemistry to characterise the relative electron distribution and the level of oxidation or reduction of atoms in a compound or ion is known as the "oxidation number," sometimes known as the "oxidation state." Based on the presumption that electrons in chemical bonds are entirely transmitted to the more electronegative atom, it is a method of bookkeeping that assigns a notional charge to each individual atom in a molecule or ion.
The -4 stands for the overall charge that the carbonate ions provided, and the x is the Fe's oxidation number.
2x + (-4) = 0
2x - 4 = 0
2x = 4
x = 4/2
x = 2
To know more about oxidation number, here:
https://brainly.com/question/29100691
#SPJ6
What is the formula of the ion hydrogen sulfite, which has a charge of -1
There are two types of ions in chemistry, one is cation and the other is anion. Anion is the negative charge ion. Therefore, the formula of hydrogen sulfite ion is HSO₃⁻
What is chemical Compound?Chemical Compound is a combination of ions, ions forms by combination of element and element forms by combination of atoms in fixed proportion.
According to our question the chemical compound from which hydrogen sulfite ion is coming is sulfurous acid that is H₂SO₃. So to get hydrogen sulfite ion we need to remove one hydrogen ion that is H⁺ from the chemical compound sulfurous acid.
The balanced reaction is
H₂SO₃[tex]\rightarrow[/tex]H⁺ + HSO₃⁻
From above reaction we can see that the charge over hydrogen sulfite ion is -1
Therefore the formula of hydrogen sulfite is HSO3-
To learn more about chemical compound, here:
https://brainly.com/question/26487468
#SPJ6
Consider the following: Li(s) + ½ I₂(g) --> LiI(s) ΔH = –292 kJ. LiI(s) has a lattice energy of –753 kJ/mol. The ionization energy of Li(g) is 520 kJ/mol, the bond energy of I₂(g) is 151 kJ/mol, and the electron affinity of I(g) is –295 kJ/mol. Use these data to determine the heat of sublimation of Li(s).
Answer:
Heat of sublimation of Li(s) = 160.5 kJ/mol
Explanation:
Given that:
[tex]\mathtt{2Li(s) + \dfrac{1}{2} I_2(g) \to 2LiI(s)}[/tex]
ΔH = –292 kJ
The heat of formation for the above reaction = –292 kJ × 2 = -584 kJ/mol
[tex]\mathtt{Li^+_{(g)} + I^-_{(g)} \to LiI_{(s)}}[/tex]
The lattice energy of LiI(s) = -753 kJ/mol
[tex]\mathtt{Li(g)\to Li^+(g) + e^- }[/tex]
The ionization energy of LiI(s) = +520 kJ/mol
[tex]\mathtt{I_2_{(g)} \to 2I_{(g)} }[/tex]
The Bond Energy of I₂(g) = 151 kJ/mol
[tex]\mathtt{I_{(g)} + e^- \to I^-_{(g)}}[/tex]
The electron affinity of I(g) = -295 kJ/mol
Heat of sublimation: Sublimation is the process of changing of a solid matter into gas without passing through the liquid stage, Now, the molar heat of sublimation is the amount of energy that must be added to a mole of solid to turn it directly into a gas without any interference through the liquid phase provided the pressure is constant.
From the above reactions: The heat of sublimation of Li(s) can be calculated by the sum total of the following.
[tex]\mathtt{Li_{(s)} + \dfrac{1}{2} I_2_{(g)} \to LiI_{(s)} \ \ -292 kJ/mol} \\ \\\mathtt{I_{(g)} \to \dfrac{1}{2} I2(g) \ \ -75.5 kJ/mol} \\ \\ \mathtt{I^-(g) \to I(g) + e^- \ \ +295 kJ/mol} \\ \\ \mathtt{LiI(s) \to Li^+_{(g)} + I^-_{(g)} \ \ +753 kJ/mol} \\ \\ \mathtt{Li^+_{(g)} + e^- \to Li(s) \ \ -520 kJ/mol} \\ \\[/tex]
[tex]\mathtt{Li(s) \to Li(g)}[/tex] = (-292 +(-75.5)+295+753+(-520)) kJ/mol
[tex]\mathtt{Li(s) \to Li(g)}[/tex] = 160.5 kJ/mol
Heat of sublimation of Li(s) = 160.5 kJ/mol
the overall take away of an experiment’s results is the______. A. hypothesis B. introduction C. conclusion
Answer:
conclusion
Explanation:
it can't be a hypothesis since tests are carried out to verify so it is not a theory
an introduction to an experiment only gives the basis of what we are investigating therefore nothing has been proven and the question is still unanswered
The overall takeaway of an experiment’s results is the conclusion. Hence, option C is correct.
What is a hypothesis?A hypothesis is a testable statement about the relationship between two or more variables or a proposed explanation for some observed experiment.
The overall takeaway of an experiment’s results can't be a hypothesis since tests are carried out to verify so it is not a theory
An experiment only gives an idea about the investigation therefore nothing has been proven and the question is still unanswered.
Hence, the overall takeaway of an experiment’s results is the conclusion.
Learn more about the hypothesis here:
brainly.com/question/5177511
#SPJ5
A gas has a volume of 25.0 mL at 2.50 atm. What is the volume at 457 mmHg if the temperature remains constant?
Answer:
≈ 0.104 liters
Explanation:
We can use Boyle's Law: [tex]P_{1}V_{1} = P_{2}V_{2}[/tex]
P₁ = 2.50 atm
V₁ = 25.0 mL
P₂ = 457 mmHg
V₂ = ?
Because pressure should be in atm we will convert 457 mmHg to units in atm:
1 atm = 760mmHg so we can divide 457 by 760 and we get ≈ 0.601atm
Next we can plug in the units to the equation for Boyle's Law:
(2.50)(25.0) = (0.601)(V₂)
Solve for V₂
V₂ will give you ≈ 104mL or 0.104L
Either is correct depending on which unit they are asking you to use
