I am having trouble converting :(

Answer:

Determine the volume of helium gas

Answer:

About 1,495 Liters of Helium.

Explanation:

To calculate the volume of helium gas formed when the magnet loses its superconducting properties, we can use the ideal gas law:

PV = nRT

Where:

P = Pressure (in atm)

V = Volume (in liters)

n = Number of moles of helium gas

R = Ideal gas constant (0.0821 L.atm/(mol.K))

T = Temperature (in Kelvin)

First, we need to find the number of moles of helium gas:

Given volume of liquid helium (V_liquid) = 1950 L

Density of liquid helium (ρ) = 0.125 g/mL = 0.125 g/cm³

To convert density from g/cm³ to g/L, we multiply by 1000:

Density of liquid helium (ρ) = 0.125 g/cm³ * 1000 cm³/L = 125 g/L

Mass of liquid helium (m) = Volume * Density = 1950 L * 125 g/L = 243,750 g

Next, we need to convert the mass of liquid helium to moles using the molar mass of helium:

Molar mass of helium (M) = 4.0026 g/mol

Number of moles (n) = Mass / Molar mass = 243,750 g / 4.0026 g/mol ≈ 60,907 mol

Now, we have the number of moles of helium gas (n), and we can calculate the volume of helium gas (V_gas) at 25°C (298.15 K) and 1 atm:

P = 1 atm

T = 25°C = 298.15 K

V_gas = nRT / P

V_gas = (60,907 mol) * (0.0821 L.atm/(mol.K)) * (298.15 K) / (1 atm)

V_gas ≈ 1,495 L

Therefore, approximately 1,495 liters of helium gas would be formed at 25°C and 1 atm when the magnet loses its superconducting properties.

You're going to first balance the chemical equation.

After that, convert the grams of Na into moles of Na, and then multiply that with the ratio of moles of NaCl to Na, and then convert the mol of NaCl into grams in order to obtain the theoretical yield, since we are given that Na is the limiting reactant.

After that, plug the values into the yield formula, doing some basic algebra, and you should get your result.

You're going to first balance the chemical equation.

After that, convert the grams of Na into moles of Na, and then multiply that with the ratio of moles of NaCl to Na, and then convert the mol of NaCl into grams in order to obtain the theoretical yield, since we are given that Na is the limiting reactant.

After that, plug the values into the yield formula, doing some basic algebra, and you should get your result.

Answer:

58.44 g/mol

Explanation:

58.44 g/mol

Answer:

The molar mass of gas Q is 43.923 g/mol

Explanation:

The given volume of ethane gas that diffuses through a porous plug in 100 seconds = 100 cm³

Therefore;

The rate of diffusion of ethane gas through the porous plug, [tex]v_{ethane}[/tex], is given as follows;

[tex]v_{ethane}[/tex] = (100 cm³/100 s) = 1 cm³/s

The molar mass of ethane, C₂H₆ = 2×12 g/mol + 6×1 g/mol = 30 g/mol

The given volume of gas, Q, that diffuses through a porous plug in 121 seconds = 100 cm³

∴ The rate of diffusion of the gas, Q, [tex]v_Q[/tex] = 100/121 cm³/s

Graham's Law of diffusion states that the rate of diffusion of a gas is inversely proportional to the square root of the molecular mass of the gas

Mathematically, we have;

[tex]\dfrac{v_A}{v_B} =\sqrt{\dfrac{m_B}{m_A} }[/tex]

Where;

[tex]v_A[/tex] = The rate of diffusion of gas A

[tex]v_B[/tex] = The rate of diffusion of gas B

[tex]m_A[/tex] = The molar mass of the gas A

[tex]m_B[/tex] = The molar mass of the gas B

Therefore, for ethane and gas Q, measured under the same condition, we have;

[tex]\dfrac{v_{ethane}}{v_Q} =\sqrt{\dfrac{m_Q}{m_{ethane}} }[/tex]

[tex]\dfrac{1 \ cm^3/s}{\dfrac{100}{121} \ cm^3/s} =\sqrt{\dfrac{m_Q}{30 \ g/mol} }[/tex]

[tex]m_Q = \left ({\dfrac{121}{100} } \right) ^2 \times 30 \ g/mol = 43.923 \ g/mol[/tex]

The molar mass of gas Q, [tex]m_Q[/tex] = 43.923 g/mol.

Answer:

.........................okay?

Explanation:

I first take back the numbers to their original forms that is to say (5.55×10^15) = 5550000000000000 and (8.88×10^18) = 8880000000000000000 therefore the difference of the two will be 887445 which is notated to (8.87445×10^5)

Answer: (8.87445×10^5)

Answer:

1. 2.63x10^6

2. 39.2

Both answers have been rounded

Answer:

2.775 g

Explanation:

Given that;

Number of moles = concentration × volume

Concentration = 0.10M

Volume =250 mL

Number of moles = 250/1000 × 0.10

Number of moles = 0.025 moles

Also;

Number of moles = mass/molar mass

Molar mass of CaCl2= 111 g/mol

Mass = Number of moles × molar mass

Mass = 0.025 moles × 111 g/mol

Mass= 2.775 g

Answer:

salt and oil

water and salt

water and sugar

Explanation:

Answer:

viruses are computer program that replicate itself and distribute itself to another computer but bacteria is micro organism that contaminate our food and can make us sick

Answer:

A. 36 percent recieved Bs

B. 40 percent of students received Cs

Explanation:

Amount of students: 12+18+20=50

Students with Bs: (18÷50) x 100 = 36%

Students with C's: (20÷50) x100 = 40%

On the first chemistry test 12 students got A, 18 students got B, and 20 student got C. Thus the percentage of students received B is 0.36 and percentage of students received c is 0.40

In mathematics, a number or ratio expressed as a fraction of 100. It is often denoted using the percent sign %. A percentage is a dimension less unit and it has no unit.

In above question 12 student got A, 18 student got B, and 20 student got C.

So total number of student = 12 + 18 + 20 = 50.

Then the percentage of students received B is as follows:-

Percentage of students who got B = (student who got B/Total number of student) X 100.

=(18/50) X 100

= 36%

Now percentage of students who got C = (No of students who got C/Total students)X100

=(20/50) X 100

=40%.

Therefore,On the first chemistry test 12 students got A, 18 students got B, and 20 student got C. Thus the percentage of students received B is 0.36 and percentage of students received c is 0.40 percentage of students who got B is 36% and percentage of students who got C is 40%

Learn more about percentage here:

https://brainly.com/question/28269290

#SPJ2

The first shell can only hold 2 electrons, but the pupil placed in 8 electrons.

The second shell can hold up to 8 electrons, but the pupil only placed in 2 electrons.

Flourine only has 9 total electrons, yet there are 10 electrons in the diagram.

Answer:

Explanation:

In the Fluorine atom there are 2 electrons in the innermost shell and 7 i the outer shell.

The actual specific heat capacity of the silver in the Calorimetry Lab is given as  0.234 J/gK.

Specific heat capacity is the amount of heat required to raise a unit mass of a substance by 1 degree kelvin.

The specific heat capacity of silver or amount of heat required to raise a unit mass of silver metal is 0.234 J/gK.

Thus, the actual specific heat capacity of the silver in the Calorimetry Lab is given as  0.234 J/gK.

Learn more about specific heat capacity here: https://brainly.com/question/21406849

#SPJ1

Answer:

His rule states that if a cyclic, planar molecule has 4n+2 π electrons

Answer: Im not sure but I think it is false.

Explanation:

Answer:

C A B

Explanation:

come on, you also know this from normal water waves.

which ones are stronger (= have more energy) ? the small ones or the big ones ?

and the same applies to all waves. the bigger the waves (higher amplitude), the more energy.

Answer:

b is the correct answer ok

A solution is made up of solute and solvent. It is an addition of two or more substances to each other that combines physically and chemically. Thus, option B is correct.

A solution is the mixture of solutes that can be more than one in a solvent that has the same composition all over (homogenous). A solution comprises two main elements called a solute and a solvent.

A solute is the part of the solution that has been added to the solvent for desolvation. On the other hand, the solvent is the substance that dissolves the solute in them to make a solution.

The homogenous mixture or the solution can be created by mixing salt and water, sugar and water, mercury in amalgamated zinc, coffee, vinegar, etc.

Therefore, option B. a solution is the addition of the substances that combine physically.

Learn more about solutions here:

https://brainly.com/question/13790411

#SPJ2

Explanation:

a chemical reaction in which the rate of reaction is proportional to the concentration of each of three reacting molecules

Answer:

This combination product contains 2 medications, acetaminophen and an antihistamine. Acetaminophen helps to reduce fever and/or mild to moderate pain (such as headache, backache, aches/pains due to muscle strain, cold, or flu).

Explanation:

it will help you. may be

Answer:

looooser

mark me brailist

Answer:

C

Explanation:

C. Adding a catalyst would increase the reaction rate.

A catalyst is a substance that increases the rate of a chemical reaction by lowering the activation energy required for the reaction to occur.

A catalyst enhances the probability of successful collisions between reactant molecules, which raises the pace of the reaction by offering an additional avenue for the reaction to occur.

As there would be fewer reactant molecules accessible to react with one another, decreasing reactant concentrations would result in a slower pace of reaction.

Due to the fact that chemical reactions often require energy to take place, eliminating heat from the system would also slow down the reaction rate. A lower value for k would result in a lower rate constant, which would lower the response rate.

Learn more about catalyst at:

https://brainly.com/question/24430084

#SPJ7

Answer:

The answer is C. 7.52 K

Explanation:

hope it helps

Answer:

it means air pollution Environment. The chemicals and nutrients found in fertilizers, while beneficial for agricultural crops, can be lethal in high doses for fish, birds and other wildlife. Pesticides, designed to kill pests chemically, are also dangerous when leached into soil or groundwater supplies.

Answer:

The correct choice is option C) The reactant that runs out first and limits how much product can be made

Explanation:

The limiting reactant is a reactant in a chemical reaction that gets consumed first and thus limits how much product can be formed.

Answer:

The reactant that runs out first and limits how much product can be made

Explanation:

Answer:

53 Joules

Explanation:

Applying the law of conservation of mechanical energy.

Law of conservation of mechanical energy: States that energy although, energy can not be transformed from one form to another, the total energy of the system remain the same.

I.e,

Mechanical Energy = E.K+P.E..................... Equation 1

Where E.K = Kinetic energy, P.E  = Potential energy.

From the question,

Given: Mechanical energy = 65 Joules, K.E = 12 J

Substitute these values into equation 1 and solve for P.E

65 = 12+P.E

P.E = 65-12

P.E = 53 Joules

Answer:

D

Explanation:

The correct answer would be that the thermal energy of the sun is transferred to the pavement.

Thermal energy refers to the internal energy possessed by a system by virtue of the movement of molecules within such a system. In other words, it is the heat energy possessed by a system.

When the thermal energy from the sun warms the pavement, it means that the thermal energy from the sun has been successfully transferred to the pavement. Thermal energy can be transferred by conduction, convection, or by radiation depending on whether the system is a solid, liquid, gas respectively.

The correct option is, therefore, D.

Answer:

1. Ionic compounds have high melting points.

Ionic compounds have high melting points.2 Ionic compounds are hard and brittle.

Ionic compounds have high melting points.2 Ionic compounds are hard and brittle.3 Ionic compounds dissociate into ions when dissolved in water.