How would the mass and weight of an object on the Moon compare to the mass and weight of the same object on Earth? * Mass and weight would both be less on the Moon. Mass would be the same but its weight would be less on the Moon. Mass would be less on the Moon and its weight would be the same. Mass and weight would both be the same on the Moon.​

Answers

Answer 1

Answer:

B. Mass would be the same but its weight would be less on the Moon.

Explanation:

The mass of a body can be expressed as the quantity of matter it contains. While the weight of a body is the extent of the gravitational force impressed on the body by a massive body.

Thus, the mass of a body is constant either on the Earth or on the Moon. But the weight would be less on the Moon because the gravitational force on the Moon is far less than that on the Earth. Therefore the weight would be less on the Moon.

The appropriate option is B.

Answer 2

The mass will remain same on both moon and Earth, but weight will be lesser on Moon than Earth. Hence, option (B) is correct.

The prime focus to solve this problem is the mass and weight of an object. The mass of a body can be expressed as the quantity of matter it contains. While the weight of a body is the extent of the gravitational force impressed on the body by a massive body.

So, the mass of a body is constant either on the Earth or on the Moon. But the weight of an object will depend on the mass and the gravitational acceleration.

W = mg

Here, W is weight, m is mass and g is gravitational acceleration.

Weight would be less on the Moon because the gravitational force on the Moon is far less (due to lower value of g) than that on the Earth. Therefore the weight would be less on the Moon.

Thus, we can conclude that the mass will remain same on both moon and Earth, but weight will be lesser on Moon than Earth. Hence, option (B) is correct.

Learn more about the mass and weight here:

https://brainly.com/question/13040516


Related Questions

A bullet fired into a fixed target loses half of its velocity after penetrating 3 cm. How much further it will penetrate before coming to rest assuming that it faces constant resistance to motion​

Answers

[tex]{\mathfrak{\underline{\purple{\:\:\: Given:-\:\:\:}}}} \\ \\[/tex]

[tex]\:\:\:\:\bullet\:\:\:\sf{First \: penetrating \: length\:(s_{1}) = 3 \: cm}[/tex]

[tex]\\[/tex]

[tex]{\mathfrak{\underline{\purple{\:\:\:To \:Find:-\:\:\:}}}} \\ \\[/tex]

[tex]\:\:\:\:\bullet\:\:\:\sf{Left \: Penetration \: length \: before \: it \: comes \: to \: rest \:( s_{2} )}[/tex]

[tex]\\[/tex]

[tex]{\mathfrak{\underline{\purple{\:\:\: Calculation:-\:\:\:}}}} \\ \\[/tex]

[tex]\:\:\:\:\bullet\:\:\:\sf{Let \: Initial \: velocity = v\:m/s} \\\\[/tex]

[tex]\:\:\:\:\bullet\:\:\:\sf{Left \: velocity \: after \: s_{1} \: penetration = \dfrac{v}{2} \:m/s} \\\\ [/tex]

[tex]\:\:\:\:\bullet\:\:\:\sf{s_{1} = \dfrac{3}{100} = 0.03 \: m}[/tex]

[tex]\\[/tex]

☯ As we know that,

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{ {v}^{2} = {u}^{2} + 2as }[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{ \bigg(\dfrac{v}{2} \bigg)^{2} = {v}^{2} + 2a s_{1}}[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{ \dfrac{ {v}^{2} }{4} = {v}^{2} + 2 \times a \times 0.03 }[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{ \dfrac{ {v}^{2} }{4} - {v}^{2} = 0.06 \times a }[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{\dfrac{ - 3{v}^{2} }{4} = 0.06 \times a }[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{a = \dfrac{ - 3 {v}^{2} }{4 \times 0.06} }[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{ a = \dfrac{ - 25 {v}^{2} }{2}\:m/s^{2} ......(1) }[/tex]

[tex]\\[/tex]

[tex]\:\:\:\:\bullet\:\:\:\sf{ Initial\:velocity=v\:m/s} \\\\ [/tex]

[tex]\:\:\:\:\bullet\:\:\:\sf{ Final \: velocity = 0 \: m/s }[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{ {v}^{2} = {u}^{2} + 2as}[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{{0}^{2} = {v}^{2} + 2 \times \dfrac{ - 25 {v}^{2} }{2} \times s }[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{ - {v}^{2} = - 25 {v}^{2} \times s }[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{ s = \dfrac{ - {v}^{2} }{ - 25 {v}^{2} }}[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{ s = \dfrac{1}{25} }[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{ s = 0.04 \: m }[/tex]

[tex]\\[/tex]

☯ For left penetration (s₂)

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{s = s_{1} + s_{2} }[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{ 0.04 = 0.03 + s_{2}}[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{ s_{2} = 0.04 - 0.03 }[/tex]

[tex]\\[/tex]

[tex]\dashrightarrow\:\: \sf{s_{2} = 0.01 \: m = {\boxed{\sf{\purple{1 \: cm }}} }}[/tex]

[tex]\\[/tex]

[tex]\star\:\sf{Left \: penetration \: before \: it \: come \: to \: rest \: is \:{\bf{ 1 \: cm}}} \\ [/tex]

A disk rotates at a constant angular velocity of 30 degrees per second. Consider a point on the edge of the disk. Through how many degrees has it rotated after 3 seconds?

Answers

Answer:

The disk covers a rotation of 90º after 3 seconds.

Explanation:

Since the disk rotates at constant angular speed, we can determine the change in angular position ([tex]\Delta \theta[/tex]), measured in sexagesimal degrees, by the following kinematic formula:

[tex]\Delta \theta = \omega\cdot \Delta t[/tex] (1)

Where:

[tex]\omega[/tex] - Angular velocity, measured in sexagesimal degrees per second.

[tex]\Delta t[/tex] - Time, measured in seconds.

If we know that [tex]\omega= 30\,\frac{\circ}{s}[/tex] and [tex]\Delta t = 3\,s[/tex], then the change in angular position is:

[tex]\Delta \theta = \left(30\,\frac{\circ}{s} \right)\cdot (3\,s)[/tex]

[tex]\Delta \theta = 90^{\circ}[/tex]

The disk covers a rotation of 90º after 3 seconds.

When will the Social Security fund dry up at its current level?
A.
2022
B.
2027
C.
2042
D.
2097
E.
2117

Answers

Answer:

C. 2042

Explanation:

trust me I know the answer

In 2042 the Social Security fund will dry up at its current level. The correct option is C.

The answer is not entirely clear, as projections can vary depending on various economic and demographic factors. However, based on the 2021 Social Security Trustees Report, the projected depletion date for the Social Security Trust Fund is 2034. This means that at the current rate of payouts and contributions, the Trust Fund will only be able to pay out about 78% of scheduled benefits after 2034.

Therefore, the closest option to the projected depletion date of the Social Security Trust Fund is C. 2042. However, it is important to note that this projection may change as economic and demographic factors change over time.

To learn about social security benefits click:

https://brainly.com/question/30746058

#SPJ7

*
If a rock falls for 3 seconds off of a bridge, how far will the rock fall?
-30 m
-45m
-60m
-75m

Answers

It will fall for about 45m

What is the most important factor that determines the thickness, and therefore strength, of the lithosphere?

Answers

Answer:

Internal temperature

Explanation:

The temperature of the lithosphere has been said to vary across range of temperature values. From a temperature of the crust of about zero degrees Celsius (or 32 degrees Fahrenheit) to a temperature of around 500 degrees Celsius (932 degrees Fahrenheit) for that of the upper mantle. This said temperature is the most crucial factor in determining the strength, the thickness and thereof of the lithosphere

A 1430 kg car speeds up from rest
to 14.0 m/s in 7.00 s. lgnoring
friction, how much power did that
require?

Answers

Energy of the car is E = m v ^2 / 2
Power is energy over time
P = E / t
So
P = (m v ^ 2)/ 2 t
P = 20 kW

The power required by the car if a 1430 kg car speeds up from rest to 14.0 m/s in 7.00 s is 20020 Joules.

What is power?

In science and engineering, power is the rate at which work is completed or energy is delivered. It can be expressed as the product of the work completed (W) or the energy transferred (E) divided by the time interval (t), or W/t.

A high-powered motor can complete a given amount of work quickly, or a low-powered motor can accomplish it slowly. Foot-pounds per minute, joules per second (or watts), and ergs per second are examples of units of power, which measure work (or energy) per unit of time.

Given:

A 1430 kg car speeds up from rest to 14.0 m/s in 7.00 s,

Calculate the acceleration and displacement as shown below,

[tex]v = u + at[/tex]

14 =  0 + a × 7

a = 2 m/s²

[tex]s = ut + 1/2at^2[/tex]

s = 0 + 1 / 2 × 2 × 7²

s = 49 m,

Calculate the power as shown below,

Power = 1430 × 2 × 49 / 7

Power = 20020 Joules

To know more about power:

https://brainly.com/question/13787582

#SPJ2

What are conducting patterns?

Answers

Answer:

A conducting pattern is a pattern in which your dominant hand follows in order to establish beats and tempo to the choir. Conductors that are directing large orchestras and choirs will often times use a baton so that the entire group can clearly see the motions.

Explanation:

what is the difference between biomass and fossil fuels main points?

Answers

Answer:

Fossil fuels release carbon dioxide into the atmosphere. Natural gas is the best fossil fuel in terms of energy output per unit of carbon dioxide emitted. Biomass is renewable because a new crop can be grown after each harvest, and biomass is a low carbon fuel. Biomass has the approximate chemical formula CHO.

Explanation:

Need ASAP!! An object lies motionless on a rough inclined surface .

Answers

Answer:

yes

Explanation:

yes

Answer:

that's true

Explanation:

if the rough inclined plane was rough enough than it would be true

Bio-mimetic gel was used in the study of genetics and ultimately banded by the Federation. A Ferengi transport ship is carrying a 5-centimeter [cm] radius cylindrical tank of bio-mimetic gel to sell on the black market. A hydrostatic pressure probe located at the bottom of the tank reads 60 millimeters of mercury [mm Hg]. If the specific gravity of the gel is 8.9, what is the mass of gel contained in the tank in units of kilograms [kg]

Answers

Answer:

m = 6.4 kg

Explanation:

Now, we use the following equation to find the mass of the gel:

[tex]P = \rho gh[/tex]

where,

P = (60 mm of Hg)(133.3 Pa/1 mm of Hg) = 7999.2 Pa = 7.99 KPa

ρ = density of gel = [tex]\frac{m}{V} = \frac{m}{\pi r^2 h}[/tex]

m = mass of gel = ?

r = radius of cylindrical tank = 5 cm = 0.05 m

h = height of tank

Therefore,

[tex]7999.2 Pa = (\frac{m}{\pi(0.05\ m)^2\ h})(9.81\ m/s^2)h\\\\\frac{(7999.2\ Pa)(\pi)(0.05\ m)^2}{9.81\ m/s^2} = m\\[/tex]

m = 6.4 kg

A force of 64 N gives an object an acceleration of 23.53 m/s^2. What is the mass of the object?
A-2.00 kg
B-1505 kg
C-2.72 kg
D-736 kg

Answers

D is the right answer for this I think

James is planning on registering for a course in electrical engineering which of the following sub disciplines could he opt for instrumentation engineering prosthetics plant design or signal processing

Answers

Answer:

Instrmentation engineering

Explanation:

Hope this helps!

Bonnie and Clyde are trying to steal the world's largest diamond from a 10 story
building. Bonnie needs to make a landing spot for when Clyde jumps with the
diamond. She knows they will be jumping from 58 feet. Neglecting air resistance,
what is the speed Clyde will be falling at right before hitting the ground?

Answers

Answer:

The speed Clyde will be falling at is 33.72.

Ok I am done waiting for an answer for 5 hours can somebody PLEASE PLEASE PLEASE help me TIMED ASSESMENT HERE!!!! PLEASE
A graph titled Speed as a Function of Time with horizontal axis time (seconds) and vertical axis speed (meters per second). A straight orange line labeled A starts at 0 seconds 4 meters per second and runs to 6 seconds 7 meters. A straight blue line labeled B starts at 0 seconds 4 meters and upward to 6 seconds 4 meters. A straight green line starts at 0 seconds 4 meters and runs to 4 seconds 0 meters.
Use the graph of speed versus time to answer the questions about acceleration.



Which of the cars is speeding up?



Which of the cars is slowing down?



Which of the cars is maintaining a constant speed?

Answers

Answer:

Explanation:

I'm going to assume that all the givens are in m/s. If I am correct, The orange line is speeding up. It is going from 4 m/s to 7 m/s. Its slant is from lower left to upper right. It is increasing in speed.

The green line is slowing down. It is going from 4 to 0 m/s. It's slant is from upper left to lower right.

The blue line is horizontal. It is neither slowing down or speeding up.

Answer:

sorry for being very very very late, but here is your answer)

car speed A

car slow down C

car constant speed B

hope this helped!!!!

Suppose a uniform solid sphere of mass M and radius R rolls without slipping down an inclined plane starting from rest. The linear velocity of the sphere at the bottom of the incline depends on?

Answers

Answer:

None of the mass or the radius of the sphere

Explanation:

When a uniform solid sphere of any given mass, say M and any given radius, say R, rolls without slipping downwards an inclined plane that starts from rest. The linear velocity of the sphere at about the bottom of the inclined happens not to depend on either of its mass or that of the radius of its sphere.

(35) Calculate the total charge of all the electrons in a copper plate of mass 3.0g,
atomic number z = 29 and atomic mass 63.5g/mol. (Avogadro's no.- 6.02x1023
atoms, e = 1.6x10-1°C)

Answers

Given :

A copper plate of mass 3.0g.

Atomic number, z = 29.

Atomic mass, M.M = 63.5 g/mol.

Avogadro's number, [tex]N_a = 6.02\times 10^{23}\ atoms[/tex].

Charge on electron, [tex]e = 1.6\times 10^{-19}\ C[/tex].

To Find :

The total charge of all the electrons.

Solution :

Moles of copper,

[tex]m = \dfrac{3}{63.5}\ moles\\\\m = 0.047 \ moles[/tex]

Number of atoms in 0.047 moles of copper :

[tex]n = 0.047\times 6.02\times 10^{23}\\\\n = 2.83\times 10^{22} \ atoms[/tex]

Since, there are 29 electrons on each atoms.

So, total charge is :

[tex]C = 2.83\times 10^{22}\times 29\times 1.6\times 10^{-19}\ C\\\\C = 131312\ C\\\\C = 1.31 \times 10^5\ C[/tex]

Hence, this is the required solution.

Circus a path along which electric current flows how would changing the battery in a circuit from 9 V to 1.5 V most likely affect the circuit

Answers

when we reduce the voltage in circuit from 9 volts from 1.5 volts the flow of the current will also get reduced in a circuit.
yeah what he said


















cirus














a










path










along











which















electric

g You heard the sound of a distant explosion (3.50 A/10) seconds after you saw it happen. If the temperature of the air is (15.0 B) oC, how far were you from the site of the explosion

Answers

Answer:

The answer is "1557 meters".

Explanation:

speed of sound in ([tex]\frac{m}{s}[/tex]) [tex]= 331.5 + 0.60 \ T^{\circ}\ C\\\\[/tex]

[tex]\to V = 331.5 + 0.6 \times 24 = 346 \frac{m}{s}\\\\\to t = 4.5 \ seconds \\\\\to S = vt = 346 \times 4.5 = 1557 \ meters[/tex]

Can I get help on this question please

Answers

it would be the 3rd one. so C

It would be the 3rd one

A motorcycle skids for a distance of 2.0 m with the icy road pushing on its tires with force of 120 N as its
brakes are applied
What is the change in kinetic energy for the motorcycle?
Round the answer to two significant digits.​

Answers

Answer:

-240

Explanation:

A motorcycle skids for a distance of 2.0 m on an icy road, then the change in kinetic energy for the motorcycle will be equal to -240 J.

What is kinetic energy?

The force which a moving object has is referred to as kinetic energy in physics. It is defined as the number of effort required to propel a person of a specific mass from still to a specific velocity.

Aside from slight fluctuations in speed, your body holds onto the kinetic energy it obtains during acceleration.

When the body slows down from its present level to a condition of rest, the same quantity of energy is used.

Formally, kinetic energy is any quantity that has a gradient concerning time in the Lagrangian of a system.

As per the given information in the question,

Distance, d = 2.0 m

Friction, f = 120 N

The angle between displacement and friction force, θ = 180°

Now, the change in kinetic energy for the motorcycle = Work done by the friction.

K.E = f × d(cos θ)

= 120 (2.0 m)(cos 180°)

Δ K.E = -240 J

To know more about Kinetic energy:

https://brainly.com/question/26472013

#SPJ2

A major league pitcher can throw a baseball an excess of

Answers

A lions speed. You’re welcome

A truck pushes a pile of dirt horizontally on a frictionless road with a net force of
20

N
20N20, start text, N, end text for
15.0

m
15.0m15, point, 0, start text, m, end text.
How much kinetic energy does the dirt gain?

Answers

Answer:

300 Joules

Explanation:

This is a common question on Khan Academy's "Calculating change in kinetic energy from a force" practice exercises. (AP Physics 1)

The simplest method to use is the following: [tex]W = F * d * cos(theta)[/tex], where W represents work (joules), F represents force (newtons), d represents distance (meters), and theta represents the angle of the force that's being applied.In this scenario, the force being applied is horizontal, so we can remove the [tex]cos(theta)[/tex] from our equation.So, our equation is now: [tex]W = F * d[/tex]. This would mean that [tex]W = 20 * 15[/tex], which is equal to [tex]300[/tex]. Our answer is 300 joules. (this value is positive and not negative because kinetic energy is being GAINED, not LOST)

Here's the real question without all the formatting:

A truck pushes a pile of dirt horizontally on a frictionless road with a net force of 20 N for 15.0 m. How much kinetic energy does the dirt gain?

A truck pushes a pile of dirt in the horizontal direction with a force of 20 N to a distance of 15 m then the kinetic energy of the dirt is 300 J.

What is work?

In physics, the term "work" refers to the measurement of energy transfer that takes place when an item is moved over a distance by an externally applied, at least a portion of which is applied inside the direction of the displacement.

The duration of the path is multiplied by the component of a force acting along the path to calculate work if the forces are constant. The work W is theoretically equivalent to the pressure f times the range d, or W = fd, to represent this idea. Work is done when a force is applied at an angle of to a displacement, or W = fd cos.

The work done, [tex]W = Force * Displacement[/tex]

W = 15× 20

W = 300 J

To know more about Work:

https://brainly.com/question/18094932

#SPJ3

explain an experiment of the phenomenon of rainfall​

Answers

Unclear/incomplete question. However, I inferred you need an explanation of the phenomenon of rainfall​.

Explanation:

Basically, the phenomenon of rainfall​ follows a natural cycle called the water cycle. What we call 'rainfall' occurs when water condensed (in liquid form) in the atmosphere is made to fall down on the ground as tiny droplets as a result of the forces of gravity.

The water cycle makes rainfall possible:

First, water on the earth's surface is evaporated (or is absorbed into) the atmosphere.Next, it then condensed into liquid form; which later falls to the surface to the ground again. And the process continues.

Which of the factors below is NOT critical in developing good physical fitness? *

environment
behavior
age
heredity

Answers

Answer: Age

Explanation:

Physical fitness has to do with the effective and efficient working of the body system which allows individuals to be healthy.

The factors that are critical in developing good physical fitness include the environment, the behavior of the individual and heredity. To maintain physical fitness, one should exercise, eat healthy, avoid smoking etc. Age is not a factor in physical fitness.

air is a gas and the particles can be pushed closer toegether which is called

Answers

Gases are easily compressed, the particles have large spaces between them, so it is easy to push them closer together. Gases have very low densities, there are huge amounts of space between particles. Due to the large spaces between particles in a gas you can force the particles closer together using a plunger.

During a hockey game, a puck is given an initial speed of 10 m/s. It slides 50 m on the horizontal ice before it stops due to friction. What is the coefficient of kinetic friction between the pick and the ice.A) 0.12B) 0.10C) 0.11D) 0.090

Answers

Answer:

The value is  [tex]\mu_k = 0.102[/tex]

Explanation:

From the question we are told that

   The initial speed of the pluck is  [tex]u = 10 \ m/s[/tex]

    The  distance it slides on the horizontal ice is  [tex]s = 50 \ m[/tex]

Generally from kinematic equation we have that

       [tex]v^2 = u^2 + 2as[/tex]      

Here v is  is the final velocity and the value is 0 m/s given that the pluck came to rest, so

      [tex]0^2 = 10 ^2 + 2* a * 50[/tex]      

=>   [tex]a = - 1 \ m/s^2[/tex]

Here the negative sign show that the pluck is decelerating  

 Generally the force applied on the pluck is  equal to the frictional force experienced by the pluck

      So  

                [tex]F = F_f[/tex]

=>            [tex]m * a = m* g * \mu_k[/tex]

=>             [tex]1 = 9.8 * \mu_k[/tex]

=>              [tex]\mu_k = 0.102[/tex]

 

Please help!!
A person is driving in a circle at 20m/s. Are they accelerating?

Answers

(C) there changing direction

Two clear but non-mixing liquids each of depth 15 cm are placed together in a glass container. The liquids have refractive indices of 1.75 and 1.33. What is the apparent depth of the combination when viewed from above?
A. 19.8 cm.
B. 23.1 cm.
C. 9.9 cm.
D. None of these are correct.

Answers

Answer:

A. 19.8 cm.

Explanation:

The apparent depth of the combination is

As it mentioned that the two clear but non-mixing liquid having depth of 15 cm that placed in a glass container together

Also the refractive indices would be 1.75 and 1.33

Based on the above information

As we know that

Refractive indices = real depth ÷ apparent depth

1.33 ÷ 1.75 = 15  ÷ apparent depth

So, it would be 19.736842 cm

Now the combination of apparent depth would be

= ( 19.736842 + 15) ÷ (1.75)

= 19.8 cm

hence, the correct option is A.

A rock is at the top of a 20 meter tall hill. The rock has a mass of 10 kg. How much potential energy does it have?

Answers

Answer:

1960 J

Explanation:

The potential energy of a body can be found by using the formula

PE = mgh

where

m is the mass

h is the height

g is the acceleration due to gravity which is 9.8 m/s²

PE = 10 × 9.8 × 20

We have the final answer as

1960 J

Hope this helps you

WILL MARK BRAINLIEST JUST PLEASE HELP

Answers

Answer:

40N in either direction is the answer

The Third choice 40n in either direction will be your answer. Hope this helped. Have a great day!
Other Questions
-2(3x+5y)=10 in slope intercept form .24 of the jackets for sale at a clothing store are blue. If this represents 15% of all jackets in thestore, how many jackets are not blue please help, i attached a picture, its abt geometry will mark brainliest if the answer is correct 9.30% of the members of a club are female and 20%of these females own cars. 30 female members inthe club own cars.PROBLEMSOLVING(a) How many female members are there?(b) What is the total number of members?(c) What percentage of the club members arefemales who own cars? The Age of Exploration took place when? What tool or weapon did the Ottoman Turks use to finally enter the city of Constantinople LAST QUESTION AND HURRY IM BEING TIMED Last year, the enrollment at Highland Middle School was 800 students. This year, the enrollment dropped to 700 students due to the opening of a new middle school. Which best reflects the percent change in enrollment at Highland Middle School from last year to this year? Joe plans to fund his individual retirement account (IRA) with the maximum contribution of $2,500 at the end of each year for the next 30 years. If Joe can earn 10 percent on his contributions, how much will he have at the end of the thirtieth year?a. $411,235 b. $611,235. c. $23,567. d. $43,567. My teacher wants me to do 6.1531 in estimate but I don't get itProblem: 6:1531 Estimate Examine the map showing population change in South America.A map titled Percent Change in Population from 2010 to 2015 in South America. Countries are labeled, clockwise, Venezuela, Guyana, Suriname, French Guiana, Brazil, Paraguay, Uruguay, Argentina, Falklands, Chile, Bolivia, Peru, Ecuador, and Colombia. A key notes percentage of change. Colombia Brazil, Suriname, and Chile are 0.6 to 1.0 percent. Argentina, Paraguay, Peru, and Venezuela are 1.1 to 1.5 percent. Ecuador and Bolivia are 1.6 to 2.0 percent. Uruguay is 0.1 to 0.5 percent. French Guiana is 2.1 to 2.5 percent.Which conclusion regarding the populations of South American countries from 2010 to 2015 can be drawn from the map?Argentinas population grew at a faster rate than did Perus population.Uruguay was the only country in South America to see a decrease in population.French Guiana experienced the fastest increase in population of all the countries in South America.Brazil, Chile, Colombia, and Suriname had the lowest rates of population growth of all South American countries. please help me im stuck Im pretty sure I have the right answer but if you answer I will give brainiest The Viking football team won 4 out of every 5 of their football games. If they played 20 games, how many games did they lose? Gemma earns $575 a week plus $180 commission for each car she sells. She earned$1835 last week. How many cars did she sell?O She sold 6 cars.O She sold 7 cars.O She sold 8 cars.O She sold 9 cars. Based on the diagram below, which statement is true?ba110115d60120 What is the ninth amendment and what does it include? Explain in Detail A professional hockey team has 15 wingers. 5 of these wingers are 30-goal scorers. Every fall the team plays an exhibition game with the clubs farm team. In order to make the match more interesting for the fans, the coaches agree to select two wingers at random from the pro team to play for the farm team. What is the probability that two of the 30-goal scorers are selected to play for the farm team? please answer and fast I could really use some help !! (The question is in the picture) Here are the answer choices:A. 1 and 2 are complementary B. 3 and 5 are verticalC. 2 and 7 are alternate interior angles D. 1 and 8 are corresponding (Please Anserw if youre sure this is really important!!)