How to prepared sodium chloride solution.​

Explanation:

Given the mass of HCl is ---- 0.50 g

The volume of solution is --- 4.0 L

To determine the pH of the resulting solution, follow the below-shown procedure:

1. Calculate the number of moles of HCl given by using the formula:

[tex]number of moles of a substance=\frac{given mass of the substance}{its molecular mass}[/tex]

2. Calculate the molarity of HCl.

3. Calculate pH of the solution using the formula:

[tex]pH=-log[H^+][/tex]

Since HCl is a strong acid, it undergoes complete ionization when dissolved in water.

[tex]HCl(aq)->H^+(aq)+Cl^-(aq)[/tex]

Thus, [tex][HCl]=[H^+][/tex]

Calculation:

1. Number of moles of HCl given:

[tex]number of moles of a substance=\frac{given mass of the substance}{its molecular mass}\\=0.50g/36.5g/mol\\=0.0137mol[/tex]

2. Concentration of HCl:

[tex]Molarity of HCl=\frac{number of moles of HCl}{its molar mass}\\=\frac{0.0137 mol}{4.0 L} \\= 0.003425 M[/tex]

3. pH of the solution:

[tex]pH=-log[H^+]\\=-log(0.003425)\\=2.47[/tex]

Hence, pH of the given solution is 2.47.

Explanation:

The chemical formula of an ionic compound can be written by using the symbols of the respective cations and anions.

The overall charge on the molecule should be zero.

Hence, the total charge of cations=total charge of anions.

The symbols of the given molecules are shown below:

sodium chloride  ---- NaCl

magnesium chloride ---[tex]MgCl_2[/tex]

calcium oxide ---- CaO

lithium phosphide----[tex]Li_3P[/tex]

aluminum sulfide ----- [tex]Al_2S_3[/tex]

calcium nitride---- [tex]Ca_3N_2[/tex]

Answer:

because some bacteria change the ph of the teeth and leads to tooth cavitiew

Answer:

5.25 moles of protons. Option e

Explanation:

Reaction between phosphoric acid and sodium hydroxide is neutralization.

We can also say, we have an acid base equilibrium right here:

H₃PO₄  +  3NaOH →  Na₃PO₄  +  3H₂O

Initially we have 5.25 moles of base.

We have data from the acid, to state its moles:

M = mol/L, so mol = M . L

mol = 1.75 moles of acid

If we think in the acid we know:

H₃PO₄  →  3H⁺  +  PO₄⁻³

We know that 1 mol of acid can give 3 moles of protons (hydrogen ions)

If we have 1.75 moles of acid, we may have

(1.75 . 3) /1 = 5.25 moles of protons

These moles will be neutralized by the 5.25 moles of base

H₃O⁺  +  OH⁻  ⇄  2H₂O     Kw

In a titration of a weak acid and a strong base, we have a basic pH

Answer:

1s22s22p6

Explanation:

Neon is an element in the periodic table and has an atomic number of 10, which means it has 10 protons in its nucleus and thus since the number of protons and electrons is the same then it has 10 electrons.

Therefore, it has 2 electrons in the first energy shell and 8 electrons in the second energy shell. To elaborate further, the first shell has a single s-sub shell that contains a single s-orbital that can hold two electrons. The second energy shell has a single s-sub-shell whose s-orbital will occupy 2 electrons, and also has a p-orbital which can hold 6 electrons, making the second shell to have 8 electrons.

Answer:

I do not speak Spanish.

Explanation:

Answer:

Explanation:

CCl4 => C + 2Cl2

Answer:

15.0 g

Explanation:

15.0% =0.150

100.0 g × 0.150= 15.0g

Sodium nitrate is "an inorganic compound with the formula of NaNO₃.

Inorganic compound is "a chemical compound that lacks carbon–hydrogen bonds".

15% = 0.15

100.0 g × 0.15= 15g

Hence, 15g of Sodium nitrate are needed to prepare 100 gms of a 15% by mass sodium nitrate.

To learn more about Sodium nitrate here

https://brainly.com/question/24256699

#SPJ2

The question is incomplete, the complete question is;

Identify the highest energy molecular process that occurs when a molecule absorbs a microwave photon

a) electronic excitation

b) bond breakage

c) molecular vibration

d) molecular rotation

Answer:

molecular rotation

Explanation:

Microwaves are part of the electromagnetic spectrum. They are lower energy, lower frequency radiation.

When molecules absorb infrared radiation, they transition between the rotational states of the molecule.

Hence, the highest energy molecular process that occurs when a molecule absorbs a microwave photon is molecular rotation.

Answer:

Fe(s)->Fe2+2e-

Explanation:

A.p.e.x

The oxidation half-reaction for the given reaction is Fe(s) → Fe²⁺ + 2e⁻ Hence, Option (C) is correct

Oxidation reaction is a chemical reaction which can be described as follows ;

In the given reaction ;

Fe(s) + 2HCl(aq) → FeCl₂(aq) + H₂(g)

Fe at RHS got converted to Fe²⁺ state at LHS which shows the gain of electron by Fe with in the reaction.

Therefore,

The oxidation half-reaction for the given reaction is Fe(s) → Fe²⁺ + 2e⁻ Hence, Option (C) is correct

Learn More about redox reaction here ;

https://brainly.com/question/13978139

#SPJ2

Explanation:

The structures of both acetone and propanal are shown below:

In the formula of propanal there is -CHO functional group at the end.

In acetone -CO- group is present in the middle that is on the second carbon.

The molecular formula is C3H6O.

Both have same molecular formula but different structural formulas.

Answer: The range of wavelengths of light that can be used to cause given phenomenon is [tex]8.953 \times 10^{21} m[/tex].

Explanation:

Given: 222 kJ/mol (1 kJ = 1000 J) = 222000 J

Formula used is as follows.

[tex]E = \frac{hc}{\lambda}[/tex]

where,

E = energy

h = Planck's constant = [tex]6.625 \times 10^{-25} Js[/tex]

c = speed of light = [tex]3 \times 10^{8} m/s[/tex]

Substitute the values into above formula as follows.

[tex]E = \frac{hc}{\lambda}\\222000 J = \frac{6.625 \times 10^{-34}Js \times 3 \times 10^{8} m/s}{\lambda}\\\lambda = 8.953 \times 10^{21} m[/tex]

Thus, we can conclude that the range of wavelengths of light that can be used to cause given phenomenon is [tex]8.953 \times 10^{21} m[/tex].

Answer:

The postabsorptive state (also called the fasting state) occurs when the food is already digested and absorbed, and it usually occurs overnight, when you sleep (if you skip meals for some days, you will enter in this state).

The catabolic state is the metabolic breakdown of molecules into simpler ones, releasing energy (heat) and utilizable resources.

Now, when you are in a postabsorptive state, the glucose levels start to drop, then the body starts to depend on the glycogen stores, which are catabolized into glucose, this is defined as the start of the postabsorptive state.

So yes, as the postabsorptive states, catabolic processes start to happen, so the statement is true.

Molar mass of Acetone

Now

Moles of Acetone:-

Amount of heat:-

Answer:

See explanation

Explanation:

Sugar is a polar crystalline substance. The sugar crystal is capable of dissolving in water since it is polar.

When sugar dissolves in water, a sugar solution is formed. If I want to separate the sugar from the water in the solution, I have to boil the solution to a very high temperature.

When I do that, the water in the sugar solution is driven off and the pure sugar crystal is left behind.

El hidrógeno es el elemento químico de número atómico 1, representado por el símbolo H. Con una masa atómica de 1.00784 u  ​ es el más ligero de la tabla periódica de los elementos. Por lo general, se presenta en su forma molecular, formando el gas diatómico H₂ en condiciones normales.

Answer:

The right answer is "3 g".

Explanation:

Given:

Initial mass substance,

[tex]M_0=24 \ g[/tex]

By using the relation between half lives and amount of substances will be:

⇒ [tex]M=\frac{M_0}{2^n}[/tex]

        [tex]=\frac{24}{2^3}[/tex]

        [tex]=3 \ g[/tex]

Thus, the above is the correct answer.

Answer:

89,6/22,4 =4(mol)

Explanation:

There are approximately 1.089 moles of oxygen gas present in the sample at STP.

At STP (Standard Temperature and Pressure), the conditions are defined as follows:

Temperature (T) = 0 degrees Celsius = 273.15 Kelvin

Pressure (P) = 1 atmosphere (atm) = 101.325 kPa = 1013.25 hPa

Now, to find the number of moles of oxygen gas (O2) present in the sample, we can use the ideal gas law:

PV = nRT

Where:

P = pressure (in atm)

V = volume (in liters)

n = number of moles

R = ideal gas constant = 0.0821 L.atm/(mol.K)

T = temperature (in Kelvin)

Given:

V = 89.6 L (volume at STP)

T = 273.15 K (STP temperature)

Let's plug in the values and solve for n (number of moles):

n = PV / RT

n = (1 atm) × (89.6 L) / (0.0821 L.atm/(mol.K) × 273.15 K)

n = 1.089 moles

So, there are approximately 1.089 moles of oxygen gas present in the sample at STP.

To know more about oxygen gas:

https://brainly.com/question/31842859

#SPJ2

Answer:

1. 1.00 gm

2. 50 ml

3. 38.93 ml

4. 11.07 ml

5. 0.01107 L

6. 0.010 moles / L

7. 0.0001107 moles

8. 0.0001107 moles

9. 0.00647042 grams

Explanation:

Silver nitrate can react with various compounds to form different products. The weight of products may be different from the original solution introduced due to combustion reaction, as heat energy is released during the chemical process.

Answer:

I think option A is right answer

Answer:

Bromine radical formation is carried out in the presence of Br₂ and Cl₂ causing the normal selectivity not to be observed ( this causes the difference in activation energy to be reduced )

Explanation:

Why the normal selectivity expected for bromination is not observed

On the basis of selectivity and applying the Arrhenius equation the greater the difference between the activation energies the more the selectivity.

as seen in the formation of primary and secondary radicals in the Bromine radical formation. this difference is caused mainly by the propagation step ( exothermic ) . But the main reason why the the usual selectivity of bromination is not observed is because it Bromine radical formation is carried out in the presence of Br₂ and Cl₂ ( this causes the difference in activation energy to be reduced )

Answer:

Following are the solution to the given points:

Explanation:

For point A:

For point B:

In point 3, the mixture was added to 100°C, which implies that the granular material flows and deforms, enabling it to become elongated. This is termed solid-state crystalline such that grains are flexible, but this material contaminates numerous little crystalline that has spheres when we cool down in point  4 polymers. It forms therefore an unstructured solid, which then in point 4 is higher in particles and less pliable in orderly atoms.

For point C:

In point 2, the specimen gets forced at room temperature to organize a huge molecule in an ordinary and crystal fashion and therefore is transparent due to highly crystalline atoms in point 2 of the PET sample.

In point 4, however, we notice how amorphous, firm but not crystalline develops. It's why light tends to disperse over many cereal limits, since many microscopic crystallines, therefore dispersion, PET in point 4 is translucent.

Answer:

Al^3+

Explanation:

Solubility rules tell us what substances are soluble in water. Since NaCl was added and no precipitate was observed, the mercury II ion is absent.

Addition of Na2SO4 does not form a precipitate meaning that Ba^2+ is absent.

If a precipitate is formed when NaOH is added, the the ionic reaction is as follows;

Al^3+(aq) + 3 OH^-(aq) ------> Al(OH)3(s)

Answer:

The rusting of iron is spontaneous at low temperatures.

Explanation:

The given chemical reaction is:

4Fe(s) + 3O2(g) ----> 2Fe2O3(s) [rust]

The rusting of iron is a chemical reaction in which iron reacts with oxygen in presence of moisture and forms iron oxide.

This reaction takes place in a faster rate when there is low temperatures in the atmosphere.

When temperature is low, the moisture in the atmosphere is more and hence, rate of rusting is more.

Answer:

Explanation:

The reaction between dimethyl malonate which is an active methylene group with an (∝, β-unsaturated carbonyl compound) i.e methyl vinyl ketone is known as a Micheal Addition reaction. The reaction mechanism starts with the base attack on the β-carbon to remove the acidic ∝-hydrogens and form a carbanion. The carbanion formed(enolate ion) attacks the methyl vinyl ketone(i.e. a nucleophilic attack at the β-carbon) to give a Micheal addition product, this is followed by the protonation to give the neutral product.

Answer:

C). Half-reactions with SRP values greater than zero are spontaneous.

Explanation:

SRPs or Standard Reduction Potentials are characterized as the ability of a probable distinction among the anode and cathode of a usual/standard cell. It aims to examine the capacity of chemicals to reduce themselves.

The third statement asserts a true claim regarding the SRPs(Standard Reduction Potentials) that the 'half-reactions which take place with the SRP possesses the values higher than zero and they are unconstrained.' The other statements are incorrect as they either show the estimation of SRPs more than 0 or display them as being restricted. Thus, option C is the correct answer.

Answer:

Option C (a higher; the same) is the appropriate response.

Explanation:

Given:

Temperature,

T = 300 K (both [tex]N_2[/tex] and [tex]H_2[/tex])

As we know,

Average speed of a molecule,

⇒ [tex]\bar v=\sqrt{\frac{8RT}{\pi M} }[/tex]

Thus, the average speed of [tex]N_2[/tex] will be lower as its molar mass is greater than [tex]H_2[/tex].

Now,

⇒ [tex]Average \ kinetic \ energy = \frac{3}{2} \ KT[/tex] (not depend on molar mass)

Hence, it will be the same.

The other three alternatives aren't connected to the scenario given. So the above is the correct answer.

Answer:

A: ΔH

Explanation:

Endothermic reactions are this that occur as a result of absorption of heat energy from the surroundings by the reactants to form new products.

Thus, we can say it is one with an increase in enthalpy (ΔH) of the system.

Thus, option A is correct.

Answer:

5×6.02×1023

Explanation:

there are 5×6.02×1023 molecules of p4010 in 5mole. there are four P atoms in a single molecule of p4010