answer:
295 ma
The minimum age of the metatonalite sample provides a maximum depositional age of 295 ma- (master of arts).
Question 1 3 pts The style of eruption depends on the plate tectonic setting in which the volcano is situated. Compare the different eruption styles you could observe at a divergent versus a convergent plate boundary. Make sure to address the roles that composition, viscosity, and gas content play in your answer.
At a divergent plate boundary, the plates are moving away from each other. This type of plate boundary is typically associated with less explosive eruptions.
Eruptions in this type of setting are usually composed of basaltic magma, which is low in silica content and very fluid.
These eruptions produce lava flows and rarely cause ash and pyroclastic flows. Since the viscosity of basaltic magma is low, gas bubbles can escape easily and cause less explosive eruptions.
At a convergent plate boundary, the plates are pushing together. This type of plate boundary is typically associated with explosive eruptions.
Eruptions in this type of setting are usually composed of andesitic or rhyolitic magma, which is high in silica content and more viscous than basaltic magma.
These eruptions produce ash and pyroclastic flows, and can be more explosive due to the higher viscosity of andesitic or rhyolitic magma.
The gas bubbles are more difficult to escape, so pressure builds up and causes more explosive eruptions.
To know ABOUT explosive eruptions:
https://brainly.com/question/1601925#
#SPJ11
which of the following might have contributed to the portion of sandstone that is eroded to leave a cavity near the base of the outcrop? (select all that apply) view available hint(s)for part c which of the following might have contributed to the portion of sandstone that is eroded to leave a cavity near the base of the outcrop? (select all that apply) the sandstone at that location has been dug out by animals. the sandstone at that location contained a harder cement. the sandstone at that location contained less cement. the sandstone at that location contained more clay and less quartz.
Options 1, 2, and 4 are correct. the sandstone at that location contained harder cement. the sandstone at that location contained less cement is a false statement. Option 3 is false.
There are three possible answers to the question regarding the portion of sandstone that is eroded to leave a cavity near the base of the outcrop.
They are as follows:
1. The sandstone at that location contained a harder cement.
2. The sandstone at that location contained less cement.
3. The sandstone at that location contained more clay and less quartz.
Therefore, options 1, 2, and 4 are correct. Option 3 is false. Sandstones are sedimentary rocks composed mostly of sand-sized grains of mineral, rock, or organic material.
Sandstone is known for its durability, which is due to its chemical composition of silica and/or calcium carbonate.
The composition of sandstone varies greatly, depending on the environment and time period in which it was deposited.
In general, the rock is composed mainly of quartz sand, but in some cases, it can also contain other minerals, such as feldspar, mica, and clay minerals.
TO KNOW ABOUT sandstone:
https://brainly.com/question/13886415#
#SPJ11
pyroclastic flows cannot travel down all sides of a volcano simultaneously. group startstrue or false
Pyroclastic flows cannot travel down all sides of a volcano simultaneously. This statement is true.
What is a pyroclastic flow?Pyroclastic flows are hot clouds that descend the slopes of a volcano at a high speed. These flows can travel down the sides of a volcano, but they do not necessarily have to travel down all sides at once, which makes the given statement true. Pyroclastic flows are one of the most dangerous aspects of a volcanic eruption, and they are responsible for a significant portion of the deaths caused by volcanoes.
Content loaded pyroclastic flows, Pyroclastic flows are made up of a combination of ash, rocks, and gas. They can travel at speeds of up to 430 miles per hour, leaving very little time for people to evacuate the affected area. Additionally, pyroclastic flows are known for their ability to travel over rough terrain and even across water. Pyroclastic flows can be initiated by various mechanisms, including the collapse of a volcanic column, the venting of volcanic gas, or a volcanic explosion. During a volcanic eruption, pyroclastic flows can travel tens of miles from the volcano's source before stopping, leaving a trail of destruction behind.
Learn more about Pyroclastic flows here:
https://brainly.com/question/30750074
#SPJ11
The establishment of maquiladoras by the United States corporations for the production of electronics components is an example of which of the following?
Exploration of union labor
New International division of labor
Industrialization
Colonialism
The establishment of maquiladoras by the United States corporations for the production of electronic components is an example of neo-colonialism.
What is neo-colonialism?Neocolonialism is a policy by which the main world powers exert their control over less powerful nations in the post-colonial era. It entails economic, political, and social control over the country rather than direct political control. Its characteristics include the economic exploitation of poorer nations by richer ones, often under the guise of international trade or the provision of foreign aid.
Maquiladoras are foreign-owned plants in which imported raw materials are made into finished goods for export back to the country of origin. The majority of maquiladoras were built in Mexican border towns in the 1960s and 1970s to produce low-cost products for US consumers. The US corporations benefited from low-cost labor, fewer environmental restrictions, and lower taxation. Hence, the establishment of maquiladoras by the United States corporations for the production of electronic components is an example of neo-colonialism.
Learn more about neo-colonialism at https://brainly.com/question/14535583
#SPJ11
according to the map, most industrialization in europe occurred in the northwest . the production of was profitable throughout western europe. the building of helped transport goods throughout europe. according to the map, the population trend indicates that more people are moving into
According to the map, most industrialization in Europe occurred in the northwest. The production of textiles was profitable throughout Western Europe.
The building of railroads helped transport goods throughout Europe. According to the map, the population trend indicates that more people are moving into urban areas.
To summarize:
- Most industrialization in Europe occurred in the northwest.
- The production of textiles was profitable throughout Western Europe.
- The building of railroads helped transport goods throughout Europe.
- The population trend indicates that more people are moving into urban areas.
TO KNOW ABOUT Western Europe:
https://brainly.com/question/14098972#
#SPJ11
there is a narrow peninsula that extends south of the state of california. what is the name of this peninsula?
Answer:
Explanation:
The California Peninsula is a narrow strip of land separated from the Mexican territory by the Gulf of California or Sea of Cortez, and the Colorado River. Its area covers 143,600 square kilometers which holds two of the Mexican states: Baja California and Baja California South.
A fog that develops when warm, moist air blows over a cold current (such as the California Current) is an example of ____ fog.a) evaporationb) radiationc) convectiond) advection
The fog that develops when warm, moist air blows over a cold current (such as the California Current) is an example of advection fog. Advection fog occurs when warm, moist air blows over a cooler surface, resulting in cooling of the air and condensation of the moisture, forming fog.
When the warm air blows over the cold current, it is cooled and its capacity to hold moisture decreases. This causes some of the moisture to condense, forming droplets of water, or fog. As the warm air is cooled and continues to move, it brings more moisture, leading to an increase in fog.
Advection fog is common in coastal areas, especially during the summer months when the cold ocean current is juxtaposed with the warm landmass. It is also common in the Rocky Mountains when warm air from the Pacific moves over the cold Rocky Mountains.
Advection fog is often seen as a low, stratus cloud that can range from thin to quite dense. It can form over a wide area and may linger for several days. It can reduce visibility to a few hundred feet and can cause dangerous driving conditions due to the low visibility.
Advection fog is a very common type of fog and can be seen in many places around the world. It is an important factor to consider when planning activities in coastal areas or near mountains.
To know more about advection fog here
https://brainly.com/question/30700027
#SPJ11
why do you think most tree-ring sites are located in the middle and high latitudes and not in the tropics?
Most tree-ring sites are located in the middle and high latitudes and not in the tropics because of several reasons.
They are as follows:
Climate conditions: It is known that tree rings reveal climatic information, such as the temperature and precipitation of an area. This is because trees produce annual growth rings, which indicate changes in climate from year to year. Trees in the middle and high latitudes experience extreme temperature changes between summer and winter, making it easier to read the tree-ring patterns compared to those in the tropics.
Soil conditions: The soil in the tropics is nutrient-rich, which helps trees grow faster and produce wider rings. It is more challenging to extract the climate information from wider rings, as the rings become less distinct and less sensitive to climate changes.
Agricultural activities: In tropical areas, there is often extensive farming, deforestation, and other human activities. This can destroy the old trees or make it challenging to find trees that have lived long enough to create a reliable tree-ring record. On the other hand, there is less farming and human activity in the middle and high latitudes, allowing for more trees to grow to old ages and creating a better tree-ring record.
Learn more about tree ring at
https://brainly.com/question/28209776
#SPJ11
explain why an understanding of geological time is critical to both geologists and the public in general.
Geological time is an important concept for both geologists and the public, as it allows us to comprehend and explain the age of the Earth and its evolution over time. It allows us to explain Earth processes and how they impact human life.
For geologists, geological time is essential for interpreting the evolution of the Earth, its climate and its environments. By understanding geological time, geologists can create theories about how the Earth formed and developed over time.
This helps them to better predict and explain natural phenomena, like earthquakes, volcanoes and floods.
For the public, understanding geological time is critical to understanding the effects of climate change, and how changes to the Earth’s environment can affect the human population.
By understanding how the Earth and its environment have evolved over time, the public can better understand the impacts of climate change and take appropriate action to protect their environment.
Finally, an understanding of geological time is also important for understanding the diversity of life on Earth. By understanding how life has evolved and adapted over time, we can better appreciate the amazing variety of life on our planet.
In conclusion, an understanding of geological time is critical for both geologists and the public. It allows us to understand and appreciate the history of the Earth and its environment, as well as the impacts of climate change and the diversity of life on Earth.
To know more about geological time here
https://brainly.com/question/22502144
#SPJ11
A field that gets flooded is more likely to be contaminated with E. coli.
true or false
Answer:
Flooding, can also introduce pathogens to your garden including E. coli, salmonella, hepatitis A and norovirus, according to research done by North Carolina State University. The risk of pathogens being introduced to a garden increases if livestock or pet areas are nearby, or if there's a compost pile in the garden.
Explanation:
The given statement "A field that gets flooded is more likely to be contaminated with E. coli" is true because when flooding occurs, it can cause several issues that increase the likelihood of E. coli contamination.
Firstly, floodwater often contains a mix of pollutants, including sewage and animal waste, which are common sources of E. coli. As the floodwater spreads across a field, it can disperse these contaminants, making it more likely that E. coli bacteria will be present.
Secondly, the excess water from flooding can lead to soil erosion, which may disrupt natural barriers that help prevent E. coli contamination. For example, healthy soil typically contains beneficial microbes that can compete with and inhibit the growth of harmful bacteria like E. coli. However, when the soil structure is damaged due to flooding, these protective features may be diminished.
Lastly, flooding can also create favorable conditions for E. coli growth. E. coli thrives in moist environments, and the waterlogged soil in a flooded field can provide an ideal habitat for the bacteria to multiply. Furthermore, flooding can lead to nutrient-rich runoff from nearby sources, such as agricultural lands, which may provide additional nutrients that support E. coli growth.
In conclusion, a field that gets flooded is more likely to be contaminated with E. coli due to the potential presence of pollutants, disruption of natural soil barriers, and the creation of favorable conditions for bacterial growth.
For more about contaminated:
https://brainly.com/question/24324754
#SPJ11
When does flooding occur?
a. When the amount of water exceeds the capacity of the land
b. When the amount of water exceeds the capacity of the rainfall
c. When the amount of water exceeds the capacity of the river's channel. The excess water overflows the river's banks and spills out across the flood plain. D. Prolonged rainfall leading to the satiation of the ground
Flooding occurs when the amount of water exceeds the capacity of the land or the rainfall. The correct option is B.
This can happen due to several reasons, such as heavy rainfall, melting snow, or a high tide. When the capacity of the river’s channel is exceeded, the excess water overflows the river’s banks and spills out across the flood plain. Prolonged rainfall can also lead to flooding, as the water will saturate the ground and begin to pool in low-lying areas.
In addition, flash floods can occur when a heavy rainstorm or thunderstorm happens in a very short period of time, making it difficult for the ground to absorb the water. In any case, when flooding occurs, it can result in significant damage to property, infrastructure, and the environment, making it important to take precautions to prevent flooding where possible. The correct option is B.
To know more about Flooding, click here:
https://brainly.com/question/19965682
#SPJ4
Air flow in a Northern Hemisphere high pressure zone is
a. downward, outward and clockwise.
b. downward, outward and counterclockwise.
c. inward, upward and clockwise.
d. inward, upward and counterclockwise.
e. downward, inward and clockwise.
Airflow in a Northern Hemisphere high-pressure zone is downward, outward and clockwise. option A is the right answer.
What is a high-pressure system?A high-pressure system is a weather condition characterized by stable, dry, and clear weather, according to meteorologists.
High-pressure systems occur when air masses having greater density than the air masses surrounding them ascend from the earth's surface and diverge in the upper atmosphere.
As the air cools, it decreases in temperature and becomes more dense, resulting in a high-pressure system.
Air moves in a clockwise manner in the Northern Hemisphere in a high-pressure system. In the Northern Hemisphere, a high-pressure system is created when air converges towards the surface of the earth.
As a result, air descends to the surface of the earth, causing increased atmospheric pressure. Thus, option A is the right answer.
TO KNOW ABOUT Northern Hemisphere :
https://brainly.com/question/26841745#
#SPJ11
what affects the patterns of prevailing winds, and how does it do so?
Some of the things that affect the patterns of prevailing winds include:
Pressure gradientsCoriolis effectHow are prevailing wind patterns affected by pressure and the Coriolis effect ?Differences in atmospheric pressure between two areas can create a pressure gradient force, which causes air to move from high pressure to low pressure. This movement of air can lead to the development of prevailing winds.
The Coriolis effect is caused by the rotation of the Earth and causes winds to deflect to the right in the Northern Hemisphere and to the left in the Southern Hemisphere. This effect plays a key role in shaping the patterns of global wind systems.
Find out more on the Coriolis effect at https://brainly.com/question/1757337
#SPJ1
how would you tell if a rock is crystalline? group of answer choices it contains crystals that have been cemented together. it does not contain crystals at all. it contains interlocking crystals. it contains all one type of crystal.
Crystalline rocks contain crystals that have been cemented together. These crystals are usually interlocking, meaning they fit together tightly. To determine if a rock is crystalline, you can look for certain characteristics.
The first characteristic of a crystalline rock is that it contains all one type of crystal. This crystal type can be identified by its shape and color. Crystals often appear in regular patterns, giving a crystalline rock a distinct, geometric look.
The second characteristic of a crystalline rock is that it is relatively hard. Crystalline rocks are usually harder than non-crystalline rocks. To test the hardness of a rock, you can use a simple scratch test. If the rock is crystalline, it will scratch metal or glass but not be scratched by them.
The third characteristic of a crystalline rock is that it does not contain any voids or gaps. Crystalline rocks are usually solid and the crystals are very tightly packed together. This creates a solid mass with no voids or gaps.
Finally, crystalline rocks often have a shiny or glassy appearance. This is due to the light reflecting off of the crystals. The shiny surface also reflects light and appears to have a glossy sheen.
To determine if a rock is crystalline, look for these characteristics. It should contain all one type of crystal, be relatively hard, have no gaps or voids, and have a glossy or shiny appearance. If these characteristics are present, the rock is likely crystalline.
To know more about crystalline rocks here
https://brainly.com/question/30750058
#SPJ11
How does the Coriolis effect affect the Southern Hemisphere?
The result of Earth's rotation on the weather patterns and ocean currents. The Coriolis effect makes storms swirl clockwise in the southern hemisphere and counter-clockwise in the Northern hemisphere.
Overall, what is our most accurate technique for measuring the distance to a nearby star?
What solid figure has two bases, but no lateral faces?
cone
cylinder
rectangular prism
triangular prism
Answer: Cylinder
Explanation:
Think of a cylinder. It has 2 parallel circular bases and a curved surface.
None of those are considered lateral. Therefore, your answer is a cylinder.
a hurricane is defined as a large area of sustained winds greater than 119 this is the wind speed at which
A hurricane is defined as a large area of sustained winds greater than 119; this is the wind speed at which a tropical storm becomes a hurricane.
A hurricane is a tropical cyclone with strong, rotating winds. A tropical cyclone is a broad, rotating low-pressure system that produces thunderstorms and potentially damaging wind and rain.
Hurricanes are classified into five categories based on their sustained winds. The Saffir-Simpson Hurricane Wind Scale classifies hurricanes as follows:
Category 1: sustained winds of 74-95 mphCategory 2: sustained winds of 96-110 mphCategory 3: sustained winds of 111-129 mphCategory 4: sustained winds of 130-156 mphCategory 5: sustained winds of 157 mph or higherHurricanes are classified based on their sustained wind speed. A tropical storm becomes a hurricane when its sustained wind speed exceeds 74 mph, and it becomes a major hurricane when its sustained wind speed exceeds 111 mph.
Learn more about Saffir-Simpson Hurricane Wind Scale at https://brainly.com/question/31044233
#SPJ11
which force is responsible for the movement of tectonic plates?
Answer:
Convection in the mantle.
Explanation:
The driving force behind plate tectonics is convection in the mantle. Hot material near the Earth's core rises, and colder mantle rock sinks. Heat and gravity are fundamental to the process.
a (bring your own device) byod policy is a statement concerning employees' permissions and responsibilities when they use their own device for organizational business.
A Bring Your Own Device (BYOD) policy is a statement that describes employees' permissions and responsibilities when they use their own device for organizational business.
What is a Bring Your Own Device (BYOD) policy?
A Bring Your Own Device (BYOD) policy is a statement that describes employees' permissions and responsibilities when they use their own device for organizational business. A BYOD policy aims to assist employees in properly using their own devices in the workplace while also maintaining the security and privacy of sensitive information on them
A BYOD policy includes the following information:
Employees' devices that are acceptable and those that are not acceptable. Operating systems and software versions that are up-to-date and supported Passwords and security procedures that are safe .Corporate data should be kept separate from personal data. Regular backups should be performed on the device.
How to securely handle corporate data when it is not required? What employees should do if their device is lost or stolen. How personal devices are authorized to access the corporate network. What will happen if a device violates the BYOD policy? These are just a few examples of the information that may be included in a BYOD policy.
BYOD policies must be tailored to meet the specific requirements and concerns of each organization, and they must be periodically reviewed and updated as necessary to maintain the highest possible level of protection against new and emerging security threats.
To know more about organizational policy refer here:https://brainly.com/question/4457705#
#SPJ11
describe how and what the properties of p s waves tell us about the interior of the earth. how do these data help explain a mechanism for plate tectonics?
The movement of the P and S waves through the earth reveals information about the earth's interior.
The P and S waves are produced as a result of an earthquake. The seismic waves are sent through the earth's interior as a result of an earthquake.
The P waves can travel through solid, liquid, or gaseous materials.
The S waves, on the other hand, are unable to pass through a liquid. They can only travel through solids. Therefore, it can be inferred that the Earth's outer core is liquid, as S waves are not transmitted through it.
The P waves' speed varies depending on the material they pass through. This varies as the density of the material through which the wave is passing varies. Therefore, it is safe to say that the earth's interior is made up of varying densities. This is also responsible for the P wave's reflection and refraction. P waves that move through denser materials are refracted while P waves that move through less dense materials are reflected.
Scientists have used this data to make predictions about the Earth's interior. Tectonics refers to the movement of the earth's plates. Tectonic plates can be shifted by the pressure of these waves. Tectonic plates in the earth's lithosphere can be affected by this motion.
The study of the properties of the P and S waves helps to explain a mechanism for plate tectonics. The waves' movement and characteristics provide data that help scientists better understand the dynamics of the Earth's interior. This data can help scientists make predictions about how the earth's plates will move in the future. The study of tectonics is crucial because it helps to explain volcanic and earthquake activity.
Learn more about plate tectonics:
https://brainly.com/question/2325633
#SPJ11
From the following, select the ways in which Titan resembles early Earth. (Choose all that apply.) a. It has a thick atmosphere. b. Its atmosphere is mostly nitrogen. c.…From the following, select the ways in which Titan resembles early Earth. (Choose all that apply.)a. It has a thick atmosphere.b. Its atmosphere is mostly nitrogen.c. It has liquid water on the surface.d. It has terrain similar to Earth's.e. It is rich in organic compounds.
From the given options, the ways in which Titan resembles early Earth are: a. It has a thick atmosphere. b. Its atmosphere is mostly nitrogen. d. It has terrain similar to Earth's. e. It is rich in organic compounds. Therefore, options a, b, d, and e are the correct ways in which Titan resembles early Earth.
Titan's thick atmosphere: Like Earth, Titan also has a thick atmosphere. The atmosphere of Titan is about 1.5 times denser than the Earth's atmosphere, and it extends up to 600 kilometers above the surface. Nitrogen is the dominant gas in the atmosphere of Titan: Titan's atmosphere is mostly composed of nitrogen gas, similar to early Earth.
The ratio of nitrogen and methane in the atmosphere of Titan is about four to one, and the remaining amount consists of trace gases like argon, hydrogen, and helium. Terrain similar to Earth's: Titan's surface is characterized by a diverse range of features like dunes, lakes, seas, and mountains, which are similar to those found on Earth.
The equatorial regions of Titan have a dune field that is similar to those found in the Namibian desert. The dune fields in the higher latitudes resemble polar ice caps on Earth. Rich in organic compounds:
The organic molecules on Titan are formed by a chemical process known as photochemical reactions, which involve ultraviolet radiation from the sun.
For such more question on thick atmosphere:
https://brainly.com/question/18188505
#SPJ11
Commercial agriculture in dry climates relies heavily on irrigation. Which of the following best explains an environmental concern that results from irrigation in arid regions?
The high use of water for agriculture increases the price of water for people in urban areas.
The soil will have increased salinity, leading to soil erosion and reduced nutrients in the soil for plant health.
The increased production that results from irrigation of the crop will lead to decreases in crop prices as the total crop harvested will be higher.
The plants grown in this dry region will start to adapt to use less water, but the period to maturity will increase.
The soil will have increased salinity, leading to soil erosion and reduced nutrients in the soil for plant health. this can be the effect of commercial agriculture.
The phrase "commercial agriculture" is frequently used to describe industrial-sized farming. But, in a legal sense, even operating a tiny produce stand is considered commercial agriculture. When food is grown commercially, it is done so to sell it. Marketing includes marketing to or through a variety of outlets, such as produce stands nearby, supermarkets, wholesalers, foreign nations, and restaurants. Due to the fact that commercial agriculture generates income that goes towards a nation's gross domestic product, it is often preferred to subsistence farming. As a result, governments frequently provide financial assistance to commercial farms in an effort to boost output. Commercial farms strive to optimise yields at the lowest possible cost because their business model depends on revenues.
Learn more about commercial agriculture here:
https://brainly.com/question/28768845
#SPJ1
why do some scientists doubt that a meteorite impact was the sole cause of the mesozoic extinction event?
Some scientists doubt that a meteorite impact was the sole cause of the Mesozoic extinction event for several reasons. There are many ways in which extraterrestrial impacts could have contributed to the extinction of non-avian dinosaurs and other Mesozoic species.
However, there is still much that we do not know about the details of how the Mesozoic extinction event unfolded.
Some of the main reasons why some scientists are skeptical of the idea that a single meteorite impact caused the Mesozoic extinction event are:
1. The geological record does not always provide conclusive evidence for a single, large-scale impact event. Some researchers have suggested that there may have been multiple impact events occurring over a longer period of time.
2. There is still much that we do not know about how the Mesozoic extinction event unfolded, and the precise timing of events may be difficult to determine.
3. Other factors such as volcanism, climate change, and changes in sea level may have played a role in the extinction of Mesozoic species.
4. The mechanisms by which an impact event could cause such widespread extinction are still not well understood.
5. The fossil record indicates that some species survived the initial impact event, which suggests that other factors may have contributed to their eventual extinction.
Overall, while the idea that a meteorite impact caused the Mesozoic extinction event is still widely accepted, there is still much that we do not know about the details of how this event unfolded.
There is ongoing research into other possible causes of the Mesozoic extinction event, and this research may shed further light on this fascinating period of Earth's history.
To know more about Mesozoic extinction here
https://brainly.com/question/10189992
#SPJ11
slash and burn agriculture is a type of . question 40 options: high-input agriculture industrialized agriculture monoculture agriculture plantation agriculture low-input polyculture
Slash and burn agriculture is a type of low-input polyculture agriculture.
Slash-and-burn agriculture, also known as fire-fallow cultivation, is a farming method used to cultivate and maintain forests or clearings in tropical areas. Farmers slash the vegetation and burn it, releasing its nutrients into the soil, which is then tilled and planted for several seasons. After that, the plot is left to regrow to its original state, allowing the forest to return to its original state, which is usually two to three decades.
Polyculture agriculture refers to a farming method in which various crops are cultivated in the same area. It has several advantages over monoculture agriculture, including improved yields, reduced use of pesticides and fertilizers, better soil quality, and pest and disease control.
Polyculture involves cultivating various crops together in the same field, allowing the crops to interact with one another, and controlling pests and diseases more effectively. Different crops might have different root systems, allowing them to take up different nutrients from the soil. This ensures that the soil remains nutrient-rich and provides natural pest and disease control by growing different crops together.
Learn more about Polyculture agriculture at https://brainly.com/question/29427176
#SPJ11
rock that has formed from lithification of any type of sediment, including clastic or chemical sediments, or organic remainsa.weathering b. metamorphicc. lavad. igneouse.magma f.erosion g.sedimentary h. protolith
Rock that has formed from lithification of any type of sediment, including clastic or chemical sediments, or organic remains is known as sedimentary rock. Therefore the correct option is option G.
Sedimentary rocks are classified into three groups. These are: clastic, chemical, and organic sedimentary rocks. Clastic sedimentary rocks
Clastic sedimentary rocks are made up of pre-existing rock fragments that have been eroded, transported, and deposited by wind, water, or ice. Examples of clastic rocks are shale, sandstone, and conglomerate.
Chemical sedimentary rocks Chemical sedimentary rocks are formed when dissolved minerals are precipitated out of water. Examples of chemical rocks are limestone and gypsum.
Organic sedimentary rocks Organic sedimentary rocks are made up of the remains of once-living plants and animals. Examples of organic rocks are coal and chalk.
Sedimentary rocks are typically formed in layers, known as strata, and often contain fossils of ancient plants and animals.
Therefore the correct option is option G.
For such more question on sedimentary rock:
https://brainly.com/question/30765754
#SPJ11
Which of the following factors describe the metamorphic conditions at a mid-ocean ridge? -low temperature -low pressure -hot, watery fluids.
The factors that describe the metamorphic conditions at a mid-ocean ridge are hot, watery fluids.
What are mid-ocean ridges?Mid-ocean ridges are linear underwater mountain chains that run along tectonic plate boundaries. They are found where two tectonic plates diverge or move away from each other.
Mid-ocean ridges account for about 20% of the Earth's surface area. They also have a major role in oceanic crust formation.
Metamorphic conditions at a mid-ocean Ridge
The following are the factors that describe the metamorphic conditions at a mid-ocean ridge:
Hot, watery fluids - Hot water with minerals like sodium and calcium is released through hydrothermal vents on mid-ocean ridges. This process is called hydrothermal metamorphism. These fluids react with the minerals in the surrounding rock, resulting in the formation of new minerals and rock textures.
Low pressure - Hydrothermal vents on mid-ocean ridges are under very low pressure due to the high pressure of the surrounding ocean water. The low pressure allows minerals and hot water to circulate freely, resulting in the formation of new minerals and rock textures.
Low temperature - Hydrothermal fluids in mid-ocean ridges have a lower temperature than those in continental settings. However, they are still hot enough to cause metamorphism in the surrounding rock.
Your question is incomplete but most probably your full question was:
Which of the following factors describe the metamorphic conditions at a mid-ocean ridge? Select all that apply.
-low temperature
-low pressure
-hot
- watery fluids.
- dry land
- weather
Learn more about mid ocean ridges at
https://brainly.com/question/11504396
#SPJ11
Are you closer to the equator in northern Argentina or southern Spain?
a.Northern Argentina
b. Southern Spain
Southern Spain is further from the equator than northern Argentina. In this instance, Northern Argentina is closer to the equator than Spain, which is far from the equator and close to the North Pole. Option A is correct .
What makes the equator unique?The length of the equator is just under 25,000 miles. Each of our planet's five main circles of latitude is based on the relationship between the Earth's axis of rotation and its orbit around the sun. The equator is the longest of these circles because the Earth bulges at the center. The phrase circulus aequator diei et noctis, which means "circle equalizing day and night" and is derived from the Latin word aequare, which means "make equal," is where the name comes from. Due to the Earth's tilt, countries on or near the equator experience year-round high temperatures. In these nations, the temperature hovers around 31 degrees Celsius on average.
To learn more about Argentina visit :
https://brainly.com/question/2165784
#SPJ1
in north america, which of the following frequently consumed items is most likely to be supplied by a trans-national corporation?a. Milk
b. Water
c. Coffee
d. Electricity
In North America, the most likely product to be supplied by a transnational corporation among the frequently consumed items is coffee.
The correct answer is C.
Transnational corporations are businesses that have headquarters in one country and subsidiaries in multiple other countries. These corporations are big enough to affect local economies, politics, and people’s lives in a significant way
North America is one of the largest coffee-consuming regions globally, and it's produced in countries such as Brazil, Colombia, and Costa Rica. The vast majority of coffee traded internationally is produced by small farmers and then sold to intermediaries for processing and roasting.
The commodity chain of coffee is increasingly being dominated by TNCs (Transnational Corporations) such as Starbucks, Nestlé, and Jacobs Douwe Egberts, among others. These corporations buy large amounts of coffee beans to process, package, and distribute to retail outlets globally. Therefore, the most likely product to be supplied by a transnational corporation among the frequently consumed items in North America is coffee.
Learn more about transnational corporations at https://brainly.com/question/29798384
#SPJ11
Numeric dating is accomplished by assigning ages in years to rocks using _____ dating methods. A. Analytical B. Commonsense C. Relative.
Option c. is the correct answer. Numeric dating is accomplished by assigning ages in years to rocks using relative dating methods.
Relative dating is the process of comparing different items to determine the age of an item relative to the other items.
It does not provide an exact age for a rock, but rather allows us to determine the age of a rock relative to other rocks or events.
For example, a rock layer that is lower than another rock layer must have formed before the upper layer.
Relative dating is used to determine the age of rocks by looking at the order in which they were formed and their positions in the stratigraphic column.
It is also used to compare and contrast different objects to determine their age.
For example, if two rocks have the same relative age, they are both older than any rock found above them and younger than any rock found below them.
Relative dating is based on the assumption that certain layers of rock were deposited at a certain time in the past, and that the ages of the layers can be determined by comparing them to one another.
This method does not provide an exact age, but it can provide a general range for the age of the rock.
Additionally, relative dating can be used to infer the age of fossils found in sedimentary rocks.
Relative dating is an important tool for understanding Earth’s history, as it allows us to place events in the correct temporal order.
By understanding the ages of different rocks and fossils, scientists can determine the rate of changes in Earth’s environment over time.
This is an important tool in reconstructing past environments and determining the history of the Earth.
To know more about Numeric Dating here
https://brainly.com/question/30838987
#SPJ11
