Answer: 4 hydrogen atoms and 2 oxygen atoms.
Explanation:
For example, two water molecules (2H2O) contain 2 • 2 = 4 hydrogen atoms and 2 • 1 = 2 oxygen atoms.
Explain what the Kb for aniline (C6H5NH2) tells you (Kb = 4.3 x 10-10).
Answer:
Explanation:
C₆H₅NH₂ + H₂O = C₆H₅NH₃⁺ + OH⁻
C₆H₅NH₃⁺ is also called anilinium ion . Thus we see that aniline reacts with water to form anilinium ion and forms OH⁻ ion . Due to it, it shows basic properties . The pH value of this aqueous solution is more than 7 . But it is a weak base because the concentration of OH⁻ formed is very less . It is so due to its less value of Kb . It has been explained as follows
Kb = [tex]\frac{[C_6H_5NH_3^+][OH^-]}{[C_6H_5NH_2][H_2O]}[/tex]
Since Kb is 4.3 x 10⁻¹⁰ which is very low value so concentration of OH⁻ that is [OH⁻] formed will also be very low . Hence it will be a weak base.
Which of the following is an example of a Lewis base?
O A. H+
B. BF3
O C. NH3
O D. H20+
Answer:
O C. NH3 is an example of a lewis base
What is the hydronium concentration of a solution of ph 4.19M
Answer:
.000064565
Explanation:
H3O+=10^-pH
- Hope that helps! Please let me know if you need further explanation.
A flask containing 500 liters of hydrogen gas was collected under a pressure of 980mmHg. What will be the volume if the pressure is changed to 900mmHg?
Answer:
80
Explanation:
im not rlly sure exactly but i think thats the anser
Review the following chemical equation: Find the molar ratio between C6H6 to
carbon dioxide, CO2. 2C6H6 + 1502 YEILDS 6H20 - 12C02
Answer:
[tex]\frac{1}{6}[/tex]
Explanation:
Molar ratio is defined as the ratio of number of moles of reactants or products in a balanced chemical equation.
In this balanced equation, the number of C6H6 molecules react to form 12 CO2 molecules.
Thus, the molar ratio between C6H6 to carbon will be equal to 2 moles of C6H6 divided by 12 moles of CO2
[tex]\frac{2}{12}\\\frac{1}{6}[/tex]
The specific heat capacity of lead is 0.130 J/g-K. How much heat
is required to raise the temperature of 15.0 g of lead from 22.0 °C
to 37.0 °C?
Answer:
Q= 29.2 J
Explanation:
22°C=295K
37°C=310K
Q= mC dT
Q= (15.0 g) *(0.130 J/g-K)* (310 K-295K)
Q= 29.2 J
29.2 J is required to raise the temperature of 15.0 g of lead from 22.0 °C to 37.0 °C.
What is specific heat capacity?The specific heat capacity is defined as the quantity of heat (J) absorbed per unit mass (kg) of the material when its temperature increases by 1 K (or 1 °C), and its units are J/(kg K) or J/(kg °C).
Given data:
22°C=295K
37°C=310K
Applying specific heat capacity formula:
Q= mC dT
Putting all the values in the formula:
Q= (15.0 g) X (0.130 J/g-K) X (310 K-295K)
Q= 29.2 J
Hence, 29.2 J is required to raise the temperature of 15.0 g of lead from 22.0 °C to 37.0 °C.
Learn more about specific heat capacity here:
https://brainly.com/question/1747943
#SPJ2
ASAP Would you expect the odor of an open bottle of perfume to spread through the air faster when the room temperature is 85F or 55F
Answer: The answer would be 85F
Explanation: The odour molecules become airborne much more quickly in a warmer environment than a colder one. So the bottle of perfume to spread faster through the air faster when the room temperature is 85F
33 types of clouds and locations
Answer:
Cirrus
Cirrus cloudsCirrus clouds are delicate, feathery clouds that are made mostly of ice crystals. Their wispy shape comes from wind currents which twist and spread the ice crystals into strands.
Cirrostratus
Cirrostratus cloudsCirrostratus clouds are thin, white clouds that cover the whole sky like a veil. These clouds are most commonly seen in the winter, and can cause the appearance of a halo around the sun or the moon.
Cirrocumulus
Cirrocumulus cloudsCirrocumulus clouds are thin, sometimes patchy, sheet-like clouds. They sometimes look like they’re full of ripples or are made of small grains.
Mid-level Clouds (6,500-23,000 feet)
Altocumulus
Altocumulus cloudsAltocumulus clouds have several patchy white or gray layers, and seem to be made up of many small rows of fluffy ripples. They are lower than cirrus clouds, but still quite high. They are made of liquid water, but they don’t often produce rain.
Altostratus
Altostratus cloudsAltostratus clouds are gray or blue-gray mid-level clouds composed of ice crystals and water droplets. The clouds usually cover the entire sky.
Nimbostratus
Nimbostratus cloudsNimbostratus clouds are dark, gray clouds that seem to fade into falling rain or snow. They are so thick that they often blot out the sunlight.
Low Clouds (less than 6,500 feet)
Cumulus
Cumulus cloudsCumulus clouds look like fluffy, white cotton balls in the sky. They are beautiful in sunsets, and their varying sizes and shapes can make them fun to observe!
Stratus
Stratus cloudsStratus cloud often look like thin, white sheets covering the whole sky. Since they are so thin, they seldom produce much rain or snow. Sometimes, in the mountains or hills, these clouds appear to be fog.
Cumulonimbus
Cumulonimbus cloudCumulonimbus clouds grow on hot days when warm, wet air rises very high into the sky. From far away, they look like huge mountains or towers.
Stratocumulus
Stratocumulus cloudStratocumulus clouds are patchy gray or white clouds that often have a dark honeycomb-like appearance.
Special Clouds
Contrails
(Photo of white streaks of contrails in the sky) Contrails are made by high-flying jet airplanes. They are still clouds, though, because they are made of water droplets condensed from the water vapor in the exhaust of the jet engines.
Weather prediction: Contrails can provide information about the layers of moisture in the sky.
Mammatus clouds
Mammatus cloudsMammatus clouds are actually altocumulus, cirrus, cumulonimbus, or other types of clouds that have these pouch-like shapes hanging out of the bottom. The pouches are created when cold air within the cloud sinks down toward the Earth.
Orographic clouds
Orographic cloudsOrographic clouds get their shape from mountains or hills that force the air to move over or around them. They can also be formed by sea breezes and often appear as lines where two air masses meet.
Lenticular clouds
Lenticular clouds are shaped like lenses or almonds or...flying saucers! They may get their shape from hilly terrain or just the way the air is rising over flat terrain.
(Hope this helps) Sky
I AM GIVING BRAINLIEST PLEASEEEEEE HELPPPPPPPPPP I NEEDDDDDDDD HELPPP PLEASE
How many grams of solute are needed to make 2.66L of a 1.99M C 12 H 22 O 11 solution?
Answer:
1812g
Explanation:
So molarity is moles/litres or M= mol/liter (lets apply this formula to find moles)
M=mol/L
1.99=mol/2.66
Moles= 5.2934 moles of C12H22O11
Next step is quite simple, we know molar mass of C12H22O11 is 342.3 g/mol so we simply multiply the moles we get to molar mass we are left with the grams needed,
5.2934 moles of C12H22O11 * 342.3 g C12H22O11 /mol = 1812g
(I have left out decimal places, you can caculate this and add them if you desire)
If 50.0 g of KCl reacts with 50.0 g of O2 to produce KClO3 according to the following equation, how many grams of KClO3 will be formed? Word and Formula equation.
Answer:
A. 82.2g of KClO3
B. Word equation:
50g of KCl react with 50g of O2 to produce 82.2g of KClO3
C. Formula equation:
2KCl + 3O2 —> 2KClO3
Explanation:
The balanced equation for the reaction. This is given below:
2KCl + 3O2 —> 2KClO3
Next, we shall determine the masses of KCl and O2 that reacted and the mass of KClO3 produced from the balanced equation. This is illustrated below:
Molar Mass of KCl = 39 + 35.5 = 74.5g/mol
Mass of KCl from the balanced equation = 2 x 74.5 = 149g
Molar Mass of O2 = 16x2 = 32g/mol
Mass of O2 from the balanced equation = 3 x 32 = 96g
Molar Mass of KClO3 = 39 + 35.5 + (16x3) = 122.5g/mol
Mass of KClO3 from the balanced equation = 2 x 122.5 = 245g
Summary:
From the balanced equation above:
149g of KCl reacted.
96g of O2 reacted.
245g of KCl were produced.
Next, we shall determine the limiting reactant. This is illustrated below:
From the balanced equation above,
149g of KCl reacted with 96g of O2.
Therefore, 50g of KCl will react with = (50 x 96)/149 = 32.21g of O2.
Since a lesser mass of O2 ( i.e 32.21g) than what was given (i.e 50g) is needed to react completely with 50g of KCl, therefore, KCl is the limiting reactant and O2 is the excess reactant.
A. Determination of the mass of KClO3 produced from the reaction.
In this case the limiting reactant will be used.
From the balanced equation above,
149g of KCl reacted To produce 245g of KClO3.
Therefore, 50g of KCl will react to produce = (50 x 245)/149 = 82.2g of KClO3.
Therefore, 82.2g of KClO3 is produced from the reaction.
B. Word equation:
50g of KCl react with 50g of O2 to produce 82.2g of KClO3.
C. Formula equation:
2KCl + 3O2 —> 2KClO3
The mass of [tex]\rm KClO_3[/tex] produced has been 82.1085 g.
The word equation for the reaction has been: 50 gram potassium chloride reacts with 50 g oxygen to give 82.1085 g potassium chlorate.
The formula equation has been, [tex]\rm 2\;KCl\;+\;3\;O_2\;\rightarrow\;2\;KClO_3[/tex].
The balanced chemical equation for the reaction has been given as:
[tex]\rm 2\;KCl\;+\;3\;O_2\;\rightarrow\;2\;KClO_3[/tex]
Computation for Mass of Potassium chlorate:From the balanced chemical equation, 2 moles of KCl reacts with 3 moles of oxygen to give 2 moles of [tex]\rm KClO_3[/tex].
The moles of reactants have been given as:
[tex]\rm Moles=\dfrac{mass}{molar\;mass}[/tex]
The moles of 50 g KCl has been given as:
[tex]\rm Moles\;KCl=\dfrac{50}{74.55} \\Moles\;KCl=0.67\;mol[/tex]
The moles of KCl available has been 0.67 mol.
The moles of 50 g [tex]\rm O_2[/tex] has been given as:
[tex]\rm Moles\;O_2=\dfrac{50}{32}\\Moles\;O_2=1.5625\;mol[/tex]
The moles of 50 g [tex]\rm O_2[/tex] has been 1.5625 mol.
From the balanced equation, for 2 moles KCl, 3 moles oxygen has been required. For 0.67 mol KCl, oxygen required has been:
[tex]\rm 2\;mole\;KCl=3\;moles\;O_2\\0.67\;mol\;KCl=\dfrac{3}{2}\;\times\;0.67\;mol\;O_2\\0.67\;mol\;KCl=1.005\;mol\;O_2[/tex]
The available moles of oxygen has been 1.5625 mol. Thus, oxygen has been excess reactant and KCl has been limiting reactant.
The moles of [tex]\rm KClO_3[/tex] produced has been given as:
[tex]\rm 2\;mol\;KCl=2\;mol\;KClO_3\\0.67\;mol\;KCl=\dfrac{2}{2}\;\times\;0.67\;mol\;KClO_3\\0.67\;mol\;KCl=0.67\;mol\;KClO_3[/tex]
The moles of [tex]\rm KClO_3[/tex] produced has been 0.67 mol.
The mass of [tex]\rm KClO_3[/tex] produced has been:
[tex]\rm Mass=Moles\;\times\;molar\;mass\\Mass\;KCl=0.67\;\times\;122.55\;\\Mass\;of\;KCl=82.1085\;g[/tex]
The mass of [tex]\rm KClO_3[/tex] produced has been 82.1085 g.
The word equation for the reaction has been:
50 gram potassium chloride reacts with 50 g oxygen to give 82.1085 g potassium chlorate.
The formula equation has been, [tex]\rm 2\;KCl\;+\;3\;O_2\;\rightarrow\;2\;KClO_3[/tex].
For more information about chemical equation, refer to the link:
https://brainly.com/question/13350862
After brushing, Fluffy's fur has a charge of +8.0 x 10' coulombs and her plastic brush has a charge of -1.4 x 10-8 coulombs. If the distance between the fur and
brush is roughly 5.0 * 10 meters, what is the approximate magnitude of the force between them?
(k = 9.0 * 10 newtonmeters/coulomb?)
A 5.0 x 106 newtons
B.
2.0 x 10-4 newtons
C
4.0 x 106 newtons
D. 2.5 x 10 newtons
Reset
Next
2020 Edmentum. All rights reserved.
SUS
Answer:
jeez thats some calculus stuff right there im pretty sure its b
Explanation:
Which of the following does NOT take place in the mouth?
a)An enzyme is added to your food to help break it down.
b)The teeth mechanically break down food into smaller pieces.
c)Nutrients are absorbed into the blood stream.
d)Both mechanical & chemical digestion begin.
The breakdown of a larger molecule into a smaller molecule is called digestion. An enzyme is required for the digestion of biomolecules present in the food particles.
According to the question, the wrong option is C that is Nutrients are absorbed into the bloodstream.
Option A is correct as we stated above.
Option B is correct, the food is a mechanical breakdown to the smaller pieces by the teeth.
Option D is also correct because in the mouth both digestions took place.
Hence, the correct option to the question is C
For more information, refer to the link:-
https://brainly.com/question/24824762
please helpppppppppp
Select the TRUE statements about the carbon cycle
The carbon cycle is the process in which carbon travels from the atmosphere into organisms and the Earth and then back into the atmosphere.
Plants take carbon dioxide from the air and use it to make food.
Animals eat food and the carbon is stored in their bodies or released during cellular respiration.
Water (H2O) is cycled around the Earth
the carbon cycle is the process in which carbon travels from the atmosphere into organisms and the earth and then back into the atmosphere
What is the pH of a 6.50 x 10-3 M KOH solution?
Answer:
11.81
Explanation:
We'll begin by writing the balanced dissociation equation for KOH. This is given below:
KOH —> K+ + OH-
Next, we shall determine the concentration of Hydroxide ion, [OH-]. This is illustrated below:
From the balanced equation above,
We can see that 1 mole of KOH produced 1 mole of OH-.
Therefore, 6.50x10^-3 M KOH will also produce 6.50x10^-3 M OH-.
Next, we shall determine the pOH of the solution. This is illustrated below:
pOH = –Log [OH-]
[OH-] = 6.50x10^-3 M
pOH = –Log 6.50x10^-3
pOH = 2.19
Finally, we can determine the pH of the solution as follow:
pH + pOH = 14
pOH = 2.19
pH + 2.19 = 14
Collect like terms
pH = 14 – 2.19
pH = 11.81
Therefore, the pH of the solution is 11.81
The pH of a 6.50 x 10-3 M KOH solution is 11.81 which is alkaline.
pH is a measure of how acidic or basic a solution is. Ph has a range from 0 to 14. pHs with less than 7 show acidity, while a pH of greater than 7 indicates a base/ alkalinity. , pH of 7 shows the solution is neutral.
KOH is a strong base, Upon dissociation,it gives
KOH -> K⁺ + OH⁻
Here, 1 mole of KOH produced 1 mole of OH-.
Therefore, 6.50 x 10-3 M KOH will prodce 6.50 x 10-3 M H
Now, we first determine the pOH of the solution with the equation:
pOH = –Log [OH-]
[OH-] = 6.50x10^-3 M
pOH = –Log 6.50x10^-3
pOH = 2.19
Now, we know that
pH + pOH = 14
Having gotten that
pOH = 2.19,
pH + 2.19 = 14
pH = 14 – 2.19
pH = 11.81
Therefore, the pH of the KOH solution is 11.81 which is alkaline.
See related answer here:https://brainly.com/question/22859923
NEED HELPPP PLSSSSSSSSSS
Why is the reaction SO2 + H20 → H2SO2 not balanced?
A. The oxygen atoms are in two molecules on one side, but one in
the other.
O
B. There are more molecules on one side than on the other.
O
C. There are more oxygen atoms on one side than on the other.
O
D. The sulfur atom is in different places in reactant and product
molecules
SUBMIT
Answer: C
# The main reason why the reaction above can not be balanced is:
This chemical reaction SO2 + H2O -> H2SO2 is not correctly written.
It must be: SO2 + H2O -> H2SO3
Explanation:
Note 1:
H2SO2 can be produced by the other chemical reaction:
2H2O + SCl2 -> 2HCl + H2SO2
....
Note 2: Answer A is false
As you can see in the reaction SO2 + H2O -> H2SO3, the oxygen atoms are in two molecules on one side, but one in the other - However, this reaction is written correctly.
Note 3: Answer D is false
Of course the Sulfur atom must be placed in different places: in reactant and product molecules.
Note 4: Answer B is false
There are different kinds of chemical reactions, and this is normal that there are more molecules on one side than on the other.
The answer is C
The correct way to balance the reaction, would be to write it as SO2 + H2O → H2SO3
Answer A is incorrect.
The oxygen atoms in the reaction SO2 + H2O -> H2SO3 are in two compounds on one end but on the other, it is in just one.
Answer D is wrong.
The sulfur atom has to be in the reactants and the products.
Answer B is not correct.
There are many types of chemical reactions . One side commonly has more atoms than the other.
SCENARIO:
A species of rabbits lives on both sides of a small stream. They can move across the stream by jumping or wading but they cannot swim. A flood caused the stream to widen into a permanent river. The rabbits become 2 groups, one on each side of the river. Being unable to swim, they could not cross the river. After many years, the climate changed so that on the northern side of the river the temperatures were consistently lower than on the southern side of the river.
1. What will happen to the members on each side of the river with unfavorable traits for their climate?
2. What event isolated the rabbits?
3. If the river and climate conditions remain the same as described above, what will happen to the original species of rabbit?
4. Why?
5. What type of isolation is represented in this scenario?
6. Could a new species form? Why?
{i need to answer all the questions help}
Hello!
Let's start:
1. The members on each side of the river with unfavorable traits for their climate will pass away, manage to produce offspring with favorable traits, or try their best to adapt.
2. A flood isolated the rabbits.
3. If the river and climate conditions remain the same as described above, the original species of rabbit will produce offspring that have favorable traits and eventually most of the rabbits will have those traits.
4. Genetic variation allows different genes to form, and since natural selection is the survival of the fittest, those that were born with favorable traits will survive and reproduce.
5. Geographic isolation.
6. A new species could form because there is no guarantee that the rabbits have the traits necessary to survive. If one with them reproduces, then there's a chance that a new species will be created eventually.
I hope I helped! Feel free to message me or leave a comment below if you need me to explain anything.
chemistry neutralization
Answer:
In chemistry, neutralization or neutralisation is a chemical reaction in which acid and a base react quantitatively with each other. In a reaction in water, neutralization results in there being no excess of hydrogen or hydroxide ions present in the solution.
Explanation:
Which element easily loses one electron to form a positive ion? A. Magnesium (Mg) B. Lithium (Li) C. Nitrogen (N) D. Fluorine (F)
Answer: Lithium (Li)
Explanation:
Once it loses its only valence electron, there’s no longer a negative charge.
Relate dark matter to the development of the universe after the Big Bang. In 3-5 sentences, speculate on how the development of the universe would have been different if there had been no dark matter. In your answer, use the term structures.
Please answer this and ill mark you as brainliest
Answer:
Dark matter also called baronic matter is the matter that makes up 27% of the universe.
In 1933 it was determined as that mass that cannot be seen, that is, the non-visible mass of outer space.
Dark matter also plays a central role in the formation of structures and the evolution of galaxies and has measurable effects on the anisotropy of cosmic microwave background radiation. The composition of this matter is unknown today.
The dark matter component has considerably more mass than the "visible" component of the Universe.
Explanation:
There are certain researchers who say that the appearance of dark matter was before the appearance of the big bang.
A relevant fact of this matter is that dark matter exerts gravity, and that gravity affects the movements of objects.
Despite the fact that nothing is known about its origin, astronomers have amply demonstrated that dark matter plays a determining role in the formation of galaxies and galactic clusters, which could not maintain their cohesion without its existence, but many doubt that it is the remainder / remnant or product of a big bang.
How many electrons with chlorine (Cl) in group 17 gain to become stable?
Answer:
Sodium is in group 1 so it has 1 valence electron (one electron in its outer shell). Sodium will be looking to lose its one valence electron in order to become more stable. Chlorine is in group 17 so it has 7 valence electrons, and therefore only needs to gain one valence electron to attain noble gas electron configuration (become stable with 8 valence electrons, just like the noble gases in group 18 have 8). Because the chlorine atom is trying to gain one electron, and the sodium atom is trying to lose one, sodium will give up its one valence electron to chlorine and the two atoms will form an ionic bond. Because chlorine is looking to gain just one electron and sodium is looking to lose the same number, the ratio of chlorine atoms to sodium atoms will be 1:1, one chlorine atom per one sodium atom.
Explanation:
Is the equation Zn+HCl > ZnCL2+H2 unbalanced or balanced
Answer:
unbalanced
Explanation:
Cl and H have an extra atom
- Hope that helps! Please let me know if you need further explanation.
Ummmm!! Can somebody please help me answer this question
Answer: is A because when the apple fell on him while he was thinking about the forces of nature he quickly studied it and sort of discovered it. That’s when he discovered gravity well it took him a while but he still did it. Hope it helped.
List and describe the steps of energy transfers that occur that allow a digital recording to be played through a speaker and ultimately become sound waves.
Answer:
1) Sound waves are stores as electrical signal in the digital recording.
2) the electrical signal of the digital recording is transcribed and sent to the voice coils.
3) the voice coil changes this electrical signal into varying magnetic fields.
4) The magnetic field pushes and pulls the diaphragm of the speakers.
5) the pushing and pulling of the diaphragm generates sound waves in the speaker.
A community includes
A. all of the living organisms in a specific place at a specific time,
B. all plants, animals, minerals, and water in a specific place at a specific time,
C. only the plants in a specific place at a specific time.
D. only the animals in a specific place at a specific time.
Answer:
answer: A. all of the living organisms in a specific place at a specific time
Explanation:
What is the specific heat capacity for a 5 g sample of metal that absorbs
100 Joules of heat energy when its temperature changes from 10 degrees
C to 40 degrees C?*
A) 15, 000 J/gC
B) 2 J/go
C)0.67 J/gC
D) 0.50 J/go
Answer:
The specific heat capacity is 0.67 [tex]\frac{J}{g*C}[/tex]
Explanation:
Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.
The amount of heat that a body receives or transmits is determined by the following expression:
Q = c * m * ΔT
Where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation.
This expression indicates that between heat and temperature there is a direct proportional relationship.
In this case:
Q= 100 Jc= ?m= 5 gΔT= Tfinal - Tinitial= 40 °C - 10 °C= 30 °CReplacing:
100 J= c*5 g* 30°C
Solving:
[tex]c=\frac{100 J}{5 g* 30C}[/tex]
c= 0.67 [tex]\frac{J}{g*C}[/tex]
The specific heat capacity is 0.67 [tex]\frac{J}{g*C}[/tex]
Use the drop-down menus to select the correct answers to complete the paragraph.
The building blocks of matter are called . A substance made up of the same kind of atoms is called a(n) . elements lose particles. This makes them .
Explanation:
The building blocks of matter are called atoms
A substance made up of the same kind of atoms is called a element
unstable elements lose particles
This makes them radioactive
(i dd the assignment)
The correct words are:
AtomsElementParticlesRadioactiveAn atom is the smallest and indivisible part of matter.An element is made up of atoms with an equal amount of protons in them. A particle is what makes up an element.Radioactivity occurs when there is a sudden burst of radiation.Read more here:
https://brainly.com/question/24612906
What is the correct answer? Please
Answer:
c
Explanation:
Proper lane placement can include positioning your car...
A. away from other cars.
B. 36 inches from the right or left line.
C. one inch from either lane line.
Proper lane placement can include positioning your car 36 inches from the right or left line. Therefore, option B is correct.
What is lane positioning ?Using different lane positions to make adjustments for potential problems and create larger space between car and problem situations. Lane position is the placement of car in the center, on the right, or on the left of a lane. The width of a lane is twelve feet on most highways or streets.
There are three main positions are lane position 1 is center of lane, lane position 2 is left side, and lane position 3 is right side. Position 2 is left side of lane is for car.
Position 3 is a vehicle placement to the right when a restriction to path of travel or your line of sight occurs. Proper lane placement can include positioning your car 36 inches from the right or left line.
Thus, option B is correct.
To learn more about lane positioning, follow the link;
https://brainly.com/question/11661954
#SPJ2
The mole concept will most likely be used in
Answer:
determining how many ozone molecules are lost in the atmosphere
Pls Mark as Brainliest!!! if this helps..
